Rotation based on the accelerometer?

Similar Questions

• Portege M700 - Rotation buton and the accelerometer does not

  Running Vista Business 32-bit.

  When I put my M700 in tablet mode and tilt the tablet to 1side and press the button next to the slider he used to rotate the screen in that direction.
  He doesn't do this more. I have
  Note also that all the utilities of the accelerometer, like tilt, shake and advanced security no longer work. detection of movement of hard drive does not work.

  I reinstalled from recovery discs and installed original and new extension of the tablet version and pvat. Nothing seems to help. I also installed Windows 7 ultimate 64-bit, it does not work there either. I've actually noticed that it also does not work on vista because of this does not not under Windows 7.

  I wonder whether or not my accelerometer is broken or not because it allows to work with the original installation of discs or is it a software problem?

  Hey mate,

  > I reinstalled from recovery disks
  To be honest, if you have the same problem with the factory settings, it appears to be a malfunction of the equipment. With the settings everything should work properly without updating a software or driver.
  So I recommend you contact an authorized service provider. Guys can help you because here it s only a user to user forum.

  By the way: is the new version of the BIOS installed?

• simultaneous acquisition of the accelerometer and a measure of a rotating machine encoder.

  I want to make a simultaneous purchase of the accelerometer and a measure of a rotating machine encoder.

  So what National Instruments data acquisition product must be chosen to do this capture.

  Sure that if your accelerometers do not need power IEPE (maybe you have an external power supply for the accelerometers) and if the voltage sensor is located in the voltage of the sensor of the 6221 range.

• Orientation of the accelerometer / rotation

  Is it possible to determine the rotation round a particular axis with the accelerometer, or you would have to assume its zero from the start and try and calculate using the acceleration of the other two?

  No, there are no methods that return information in rotating screen orientation changes, I don't think that's what you're after.  The AccelerometerData class allows to get data of movement along the X, Y axis and Z.

• Possible in order to create a group of 3d objects and rotate each one based on the axis of the Group?

  I need to create an extruded rectangle.  On the face of this rectangle must be another extruded rectangle.  I wish I could rotate the two objects separated in 3d based on the same axis.  Is this possible?  I played a bit with the 3d effects and can't seem to get this to work.

  Forget about it.

  Apology spastic illie for 3D can only cope with one object at a time.

• How to choose a Rotator ad based on the location of users

  I have the following requirement and do not know how you can achieve what no main script is allowed in British Colombia

  On each page a set of ad rotators are displayed based on the location of users - this could be a casual user, wandering on the web site or of a registered member.

  There are more than 400 regions of advertising (lets just call them cities).  When a user walks on the web site, we know the IP address and can then determine the city with external services.

  Now that we know the city the person comes, we want to present the page with the correct sequence.

  It's obviosly not a good idea to load 400 banner ads and expose the required.

  Can someone help me with this problem?

  I'm no expert on JSON/JQuery/AJAX etc, a few examples would be appreciated.

  Thanks in advance

  You can go this way:

  -Create a folder where you create pages for each banner, something like/banner/london.html, /banner/newyork.html and so on

  -place an adrotator on each page

  -on the model where you need to have made banner insert the script that you use to determine the exact location of the user and the name of the city translates

  -create a .js which takes the name of the city and jQuery.load () the corresponding page in the folder banner, here are a few examples of the load method - http://www.w3schools.com/jquery/ajax_load.asp

  I hope this helps!

  PS - you can even have a single page for all the adrotator, each wrapped in a div with a unique ID 'city' and load the div containing the necessary adrotator, something like:

  {module_adrotator, 15264}

  {module_adrotator, 15265}

• Portege M700 rotation problems after the upgrade to Windows 7 64-bit

  I've upgraded to windows 7 yesterday evening on my portege m700. It is Windows 7 Pro 64 bit. I installed all the drivers in 64-bit on Toshiba page and the Windows section. Everything works perfectly except the screen does not properly rotate when in tablet mode. I can press ctrl + alt + arrow keys to rotate, and I can also use the windows Mobility Center to rotate 90 degrees at a time. I wonder what I have to do turn once engaged in tablet mode, as it did in Vista. I have the Toshiba rotation utility installed, but it doesn't seem to be something. It seems that it does not receive a signal from the screen that it was shot.

  I need it for school, so any help is GREATLY appreciated.

  Hello

  I think that there are not all 64boit drivers for Win 7 published and released for M700 and you will need to also install drivers for Vista 64-bit!

  For example:
  * Tablet PC Extension v 1.0.0.1 for Vista 64 bit Package *.
  This package installs a range of important public services.

  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.

  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.

  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

• create a spectrum of the order from scratch (i.e. get a fft-based on the position of the same time deductions in the sample data)

  Hello people,

  THAT THE QUESTION PERTAINS TO:

  I play on 2 parameters of a system based on the sampling time: Rotary position and vibration (accelerometer g increments).  I want to take a fft based on the post to create a spectrum of the amplitude-phase speed order in / s.  To do this, perform the following:

  1 integrate (and scale) g vibration signal in the / s (SVT Integration.vi)

  2 signal sampled vibration resample the same time at an angle similarly charged signal (ma-resample unevenly sampled input (linear interpolation) .vi)

  THE QUESTION:

  Order in which operations should be carried out, integrate then resample or vice versa?  I didn't order would be important, but using the same set of data, the results are radically different.

  OR ORDER ANALYSIS 2.0 TOOLSET:

  I have the NO order Analysis Toolset 2.0, but I could not find a way to get the speed profile generation live to work with signals of position encoder DAQmx (via pxi-6602) quadrature.  In addition, it seems that I have to specify all the commands I'm interested to watch, which I don't really know at this point (I want to see all available commands) so I decided to do my own fft based on the post to get a spectrum of the order.

  Any help is greatly appreciated.

  Chris

  The order is to integrate the time domain of first - creating a speed channel.  You now have a new channel of data.  In general I would put this in the same table of waveform with waves of acceleration time.

  Then re - sample your acceleration and/or your speed signals, and then you can calculate the spectrum of the order.

• How do I access the accelerometer of the iPad on board animate?

  How do I access the accelerometer of the iPad on board animate? Need code to be able to start an animation of a label, once the iPad has been rotated by the Viewer.  Help?

  Hi, i.brown-

  Try searching the deviceOrientation event.  Christian Cantrell has a great video that talks about:

  http://blogs.Adobe.com/Cantrell/archives/2012/03/accessing-the-accelerometer-and-gyroscope-en-JavaScript.html

  -Elaine

• Code lock based on the packing method

  Good flex developers iOS, here's an interesting question that I'm sure that we have not the ability to do immediately.  As I'm not 100% certain of what I thought I'd ask again.

  I find myself constantly rotates and off segments of code based on the packing method I'm currently going to test with (i.e. versions fast or Standard)... as performance is absolutely significantly worse in the "Fast" mode I turn off things like the effects of particles and heavy calculations that I have no need to test quickly by using a young build.  Is it possible for us to determine the current packing method that was used?  That way we can pack the segments of code like that in the conditional statements, based on the packing method?

  There is conditional compilation. With it you can write something like:

  {CONFIG::FAST}

  this.useParticleEffects = false;

  }

  {CONFIG::STANDARD}

  this.useParticleEffects = true;

  }

  You can (or could before Flash Builder 4.7 beta) write a conditional with conditional compilation:

  this.useParticleEffects = (CONFIG::FAST)? false: true;

• How can I view and then rotate or crop the images duplicate

  My wife has a large photo collection (more than 50,000 images) and created a copy of a hundred photographs to include in a video that I'm trying.

  The problem is that I can't host elements to display these images because they are "double images".

  I had to go to "display" Location of the folder mode"able to find the directory.  When I did, I noticed the 10 subdirectories had not been imported, so I tried to import them and got this error:

  Nothing has been imported.  The files or selected it to import one or more files did not all types of supported files, or the files are already in this catalogue.

  I realize they are duplicates, but I want TO see them I can modify them (rotation, cropping, etc).

  (Q) is there a way to get items to 'jump me' to the original photo so that I can rotate or crop the 'original '.  NOTE: I use the Version value function or save my changes as a "new image" altogether.  I think that if it worked, I could create an "Album" that "duplicate" of the photo that my wife gave me and achieve what I have to do.

  I am brand new to elements (previously, I used ACDSee and it could do without hassle).  I have heard and read that organizing Elements 9 is much improved, so I wanted to give it a try.

  (Q) elements have a simple checkbox to allow me to work with duplicate images?

  (Q) is the solution to create a different catalog?    I did to work around this problem (for now).

  Also

  (Q) Elements 9, have a way to show all the images in all the files under a given folder?  I found that if I have a directory that contains 10 subdirectories, when I'm in the upper level without images directory are displayed.  In ACDSee, it show me all images in a directory given, including all subdirectories.  Is it possible to do it in Adobe Elements 9?

  Thanks for any help.

  The Organizer is not a browser, it's a database: even if he can show the photos in your folder structure, it works only on files that have been 'imported' and listed in the catalogue. It can show your saved photos displayed according to the structure of actual file based on the paths saved with each file present, but you will have problems if a top-level folder is empty.

  However, items saved in a catalog cannot be duplicates, and the Organizer prevents duplicates to be registered. There is no simple way to one click to override this constraint, which would mean another database 'key', that is to rename the duplicates, you wish to register.

  In practice: since you have to rename duplicates before importing them, you could do this directly in Windows or any other freeware like Faststone photoresizer.

  Or you may open these images directly from the Publisher, the navigation in your folder structure.

  Imagine you have duplicates in a folder and rename them and import them using only the PES:

  -To the editor, use the 'treat multiple files' to export the files in this folder and rename them, e.g. "IMG_0012.jpg" + "dupl" indicating the same destination folder

  -Try again "get files and videos ' Organizer.

• Reflecting the ball based on the angle of the wall

  I know it will inolve some trig, but exactly how it will apply?

  Here's what I have for when the ball hits the wall:

  rotation * = - 1;

  It works based on the cannon angle but not the wall angle. Any help?

  If you come in the wall you have "this ._rotation", then bounces off the wall, you will have...

  This.rotation = 2 * wall._rotation - this ._rotation;

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

  How can I change the default Google search engine in Firefox 8 Google.com to google.co.uk? Yes, I live in France with a French ISP, but English is my mother tongue and I want responses based in the United Kingdom.

  I use XP Pro.

  You can find on the site of Mycroft Project search engines.

  • http://mycroft.mozdev.org/
  • http://mycroft.mozdev.org/Google-search-plugins.html

• Satellite A210-1BX - error based on the CD/DVD drive

  Hello

  I have a problem with my DVD writer! I use Nero and if I burn MP3 CD or DVD .avi files happens whenever an error based on the drive. No detail!
  But on the CD are the opder of 1/2 3/4 data!
  If I insert an .mp3 CD Windows Vista said, the CD is empty! Vista is already NEW!

  Can someone help me? Or I have to contact Toshiba, I guarantee!

  Thank you

  Hello!

  Have you checked the site factory of Nero for an update? Maybe it s just a software problem that the burning procedure fails.
  In addition, you can try another burning program. A few days ago, I tested CD BurnerXP and I was very surprised! It s a freeware program and it also contains a large number of functions that it s worth a try! ;)

  Here in the forum I noticed that the dismantling of the upper and lower filters can often solve problems with the CD/DVD drive to check of workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Good bye