Cannot run Windows programming languages 7.

Similar Questions

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot run Windows 7 SP1 on big HDD (1 TB)

  Hello

  I just realized about this very recent which is apparently now closed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=275105

  I had same problem with a Toshiba 1 TB drive - I lost on that day and tried at least 10 Windows 7 installs with various behaviours/settings/partitions and still the same result. Cannot run Windows Update.

  I also tried to install Windows 7 SP1 from a DVD and have failed with a catastrophic mistake. I also tried to reformat the disk, the WIndows repair tool (ha!) update and installation when you're standing on my head while reciting the works of Shakespear.

  I gave up in the end and decided to NOT use it as a system disk at all. Instead, I installed Windows 7 on a smaller drive and uses the 1 TB and successfully as a secondary on the same PC drive with a single partition of 1 TB.

  I'm likely to have problems - maybe when the player is more complete and if I might be wise to split into 2 or more partitions?

  I just bought the drive so I can send it if it's going to be a waste of time.

  Thank you very much.

  And what model of Toshiba laptop do you have?

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• Cannot run labview program made using xp in windows VISTA

  Hi, I'm new to Labview. Hope that all of you could guide me.

  My project is on the ANFIS classification, where my sv gave me a program that has already been done. When I try to run, the program just not run. There is no error for the program report. What is the .NET framework is not compatible because the program is programmed based on .NET 2.0 framework, not the latest .NET 3.5 framework? Or missing DLL or another reason?

  What can I do to make the program work on Vista?

  Please, help me.

  Thank you

  Kaio

  Try to run the program in compatibility mode. Right click > properties > compatibility > Windows XP compaitibility mode

• Cannot run some programs after system restore to remove the virus

  Hello

  Toshiba my duaghter had a nasty virus that pretends to be an antivirus software product, which sneaked in, between the time his default service Norton has expired and I had the time to install Trend.

  Can not remove it using trend, so on the advice of a friend, decided to make a windows system restore to a point before the infection. It worked successfully and the virus has disappeared, but now she can't run some programs, I tried to reinstall Trend, but fails because he says you must first uninstall Norton. But I can't run Norton, or uninstall, and certain folders on C: are no longer accessible.

  I have to do a full restore of the Toshiba System (IE back tofactory settings? This seems a drastic measure, but the issue is beyond my meager knowledge of PC.

  Thank you

  Graeme

  Hey Buddy,

  Hmm... This announcement is a bit confusing... Maybe the programs you want to say were installed after the system restore point, who knows?

  In my opinion you must reset the laptop configuration that you have already written. This will restore the pre-installed Windows version where everything is working correctly and that all the drivers and tools are installed.

  Therefore, you only need the Toshiba Recovery disk and boot from it. This will restore the factory settings.

  Check this box!

• Cannot run imvu program

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  just in incompatible application? I can't run my imvu schedule it by saying that the verification solution user.

  Hello

  ·         What is the operating system that you are using?

  ·         Are you referring to IMVU Social site or program development 3D IMVU?

  If you are using Windows 7 and you are not able to run the program IMVU then you can try to run it in compatibility mode.

  To so please check the link below.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are referring to the IMVU 3D development program, I suggest you post your question on the link provided below for assistance.

  http://www.IMVU.com/catalog/modules.php?op=modload&name=phpBB2&file=index.php

• file loss or damage after running automatic updates, cannot run windows without having to re - install

  I am currently running Windows vista 64-bit, but I'm unable to allow automatic updates to run because it results in loss/damage/corruption of files.
  It will install everything as usual and reboot the computer, but instead of windows startup, it reports that windows cannot open because there is a missing or damaged file. The pc is not repairable by placing it in a previous restore point or using the at startup repair shop and I find myself having to reinstall VISTA to get the pc working again. Accordingly, Iam unable to install service packs for Vista or other updates to the system because I don't want to reinstall my computer is there a patch or fix for this error?

  J0seph1ne,
  If you have a question whenever you install an update with the loss of corruption\file then it is possible that you have a problem with your hard drive or with and infection.  You can try the tools\links below.  I suggest you then install just a few updates both to seek only possible that poses a problem.

  Disk error checking

  Get rid of malware

  Can I clean an already infected computer?
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run the program: "Sage 50 accounts.

  Original title: .net framework

  using windows xp, you try to run sage 50 software accountign, called wise, they said I have a problem with the .net framework, have "repaired".net Framework, with microsoft technical support and the program does not start, suggestions?

  What is the latest .net framework you have? (or the list of all if possible)

  You get specific errors when you try to run the program?
  If you right click on the program that you try to run, and then select "run as" and then "uncheck" the box to "protect my computer...". "then press OK. You get different results?
  Let me know. I'll see what I can do to help.

• CODE 80072EFE: cannot run windows update

  I had some problems with my computer Windows Vista - Business Office.  Here are the ones I've noticed so far.

  1. I can't run windows update, I get error code 80072efe when I try.

  2. I get continuous popups.  Not all the time and not every time I have a Web browser open.  Sometimes my browser will open only to Web sites at random, for most of the sites trying to sell me something.  I've just close it before it ends even loading and it will be generally fine for awhile.

  3. on my desk, I'm going to organize my icons where I want that they around my screen (work icons in a spot programs, browsers/email in another, records of files on my second monitor, etc.)  Whenever I restart all my icons automatically group either by date or name, and I have to go through the re-organization.  (This one is obviously not really important but I thought that I list all symptoms).

  4. I tried to do a system restore, my computer has a restore point when you start if you press F11 on the scree of HP (or enter the boot menu by pressing F8 or F5, etc) and it will not allow me to enter this screen.  I can't enter the menu start and any other menu it lists on this screen, but the system restore seems to be disabled in some way.

  I tried to run the scan on windows.live.support (or whatever the site is) and he found a lot of problems and 1 question he couldn't solve, so now I'm stuck.  I tried running malwarebytes scan and it does not pick up any viruses.

  Any suggestions?

  Launch TDsskiller (Rootkit removal tool)

  http://support.kaspersky.com/downloads/utils/tdsskiller.zip.

  After that, restart the computer and check for updates

  And if there is a pop - up use the scanner found at http://safety.live.com

• Cannot run Windows 10

  I don't understand what that means. He told me to look at a problem of compatibility. I clicked on the overview report it says "you're good to go and my PC runs Windows 10. I have all green checkmarks. The only thing I don't have on my PC's touchscreen. My monitor is not like this. So, I don't know what the problem is. I had checked my laptop and I'm able to download Windows 10, because it has Windows 8. My computer has Windows 7. If the computer is Windows 7 and not Windows 8? I didn't download Windows 8 at the time because I go to school and I didn't want to cause disruption with my studies at school.

  I want to download Windows 10 before the date, but I don't know what to do.

  Please help me.

  Thank you

  Carrie.

  Try to upgrade manually:

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• My graphics card cannot run windows 7.

  Before I installed the graphics card, I'm able to run windows 7 perfectly, but when I installed its splash screen only windows 7 graphics card saws, and I try to re-installed windows 7 is not windows 7 manual screen only saws saws when I start windows 7 dvd its saws windows 7 loading files, but not showing me manual screen of windows 7. I only be able to run windows xp.

  Graphics card dealer told me that your computer needs a resolution more but I test on large LCD around 19 to 20 inch lcd, I couldn't NET 7 manual, the problem is still above.
  I have a Nvidia gerfoce gt 520 2 GB DDR3 graphics card, I bought 1 or 1.5 months ago.
  My motherboard is ZXI945-LM4 2 GB of ram, 160 GB of HARD drive.
  Please help me.

  Hi Dounibiligda,

   

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you update your BIOS settings and check the issue:

  BIOS: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

   

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists then I suggest you to contact support Nvidia Geforce from the links below:

  http://www.nvidia.com/page/support.html

   

  http://www.GeForce.com/support

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• CANNOT RUN WINDOWS UPDATE ON VISTA

  So I can't update anything on my computer that uses windows update, its been like this for about 3 days now, I tried to figure out how to solve this problem, but I do not receive either where can someone please help?

  Windows Security Essentials gives me the error code 0 x 80004002

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run windows 7 64 bit, but the computer is capable.

  I ordered the online download of windows 7 64 bit by accident.  My computer is capable of running windows 7 64-bit, however, I'm currently running vista 32 bit.  Is there a way can I return my order online for the 32 bit, or do I have to download the 64-bit version and has two operating systems on my computer?

  We are dealing with Windows Update features in this forum, not the upgrade of Windows. Transfer your question here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or contact Support MS. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Cannot run Windows 7 after installing Windows XP.

  Hi all, I have a problem with my windows system. I've been a happy user of Windows 7 Professional, but I missed my old XP, then I installed it, and... I can't run Windows 7 now. I can't choose the OS I want to use, but Windows XP runs as all other systems were not. You know, where is the problem? Need help please, if you can.

  Thanks for all the help.

  / Sorry for my mistakes, I'm from the Poland, and I learn again :)

  If you overwrite your Windows 7 partition in the process and you have valid licenses for both systems, then you can try to change the Windows XP boot manager to restore the Windows 7 operating system:

  http://support.Microsoft.com/kb/306559/en-us

  The article is a bit old, but its principles will probably still allow you to dual boot Windows 7 and XP provided you delete the Windows 7 partition when you reinstalled XP.

  While the dual-boot will probably work for you, I think it would be better for you to perform a Windows Anytime Upgrade to Windows 7 Pro or above and then use the XP compatibility mode:

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  [This assumes that your hardware is fast enough for this.  Most newer computers with Intel Core-2 or better processors have hardware virtualization that will allow the smoothly]