Round off to infinity gives an unexpected result in my VI-

Similar Questions

• VLOOKUP gives incorrect/unexpected results

  HI guys

  I used to think I had this spreadsheet thing down pat, but I find myself place after midnight with a VLOOKUP problem struggle! I really hope that you can show me the error of my ways...

  I'm a convert from Excel so I can be taken in a mind control thing. I built a fairly large things relating of worksheet to do a lot of hobbies. I give it to the people who do the same kind of thing I do. It calculates the SOAP making tips, but I just found out that he gets things wrong - that is potentially dangerous.

  

  I have a version simplified that what is happening in the picture above. In the F2 cell I: VLOOKUP (E2, values: results, 2, the search by proximity-match).

  Now, I expect the numbers look down column B to find the value in cell E2 (1.90) and return the corresponding value of the C column (19.0). However, it does not. Instead, it provides the value of the cell above as if it could not find a match.

  I tried every setting I can think of nothing doesn't. I put all the cells in the table above to a number to 2 decimal places. I even changed the exact match and close match but that just made things worse.

  I know it's going to be something that will make me to get started me, but I need to fix no will not hurt. Any help gratefully received.

  Cheers, Grant

  PS I think I should mention that I do this on an iPad 2 air which is a bit new for me. And I just noticed I have write in figures for Mac. I'm sorry for that but I think that the versions are supposed to have the same capabilities?

  I suspect that you use calculated values, rather than hand is entered in your "Search values" column, and even if you have formatted the column to display two decimal places, due to approximations that occur when doing calculations decimal on a computer using binary mathematics, the actual values using the VLOOKUP function differ slightly as many additional decimals on any line. If you wrap each calculation in a function to change the actual value with 2 decimal places, if the cell contains exactly what your put poster in the form, you will get the desired result.

• Problem with pantone and 'effect of mix' gives 'of unexpected results.

  Hey!

  This is the case:
  Im working on one design racing car and I need a pantone mix to match a graphic film 3 m.
  I have a graphic film that will apply to the front of the car. This film of 3 m spesific equality / match pantone 165 C.
  The other half of the car is supposed to have a printed film applied. on this impression, I have a mix (complex, cannot be used in this case degraded form) from a dark place
  CMYK color and ending in Pantone 165 C. The result of the printing is not as I want it to be. Smooth smoothing on the screen has turned into something and is not quite usable.

  My question is that is can not turn the spot pantone to process, because then I will not have control over the outcome of the printer. The people of said production if they print in CMYK the result will not be 165 C.
  I need the Pantone to be printed in Pantone 165C to match the packaging film.

  I did some testprints and it seems to be an issue between illustrator and printer.

  Is it possible to solve this problem and still have total control of color?

  Greatfull for any help in this matter!

  Too everyone. Thanks for all the good advice and to comment on it.
  The solution for me was simply to send the file to the production elsewhere.

  They have the newest equipment/digital printer, there is.

  Probably not very satisfactory for the geek inside you, but he saved for sure to spend more time on
  This. Thanks again!

  

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• In the bar when I write sth such as address: soccer, it leads to search results from yahoo? How do I will change it give me the results of google search?

  In the bar when I write sth for example to address: "soccer", it leads to search results from yahoo. How do I will change it give me the results of google search?

  Hi vavamvak,

  You should take a look at article in the database Search the Web from the address bar . It will show you how to change the default address bar search provider.

  Hope this helps!

• DAQmxReadAnalogF64 gives unexpected results with 9239 of Ni - DAQmx

  Hi all

  I use a NI 9239 with a laser sensor, and I would like to acquire some pressure readings of the probe which measures the height. It works very well with Ni Max, but not in C + c++ / MFC app I am developing. I get something that looks like amplidied noise:
  1 reading scale doesn't seem fair (pressure readings I get from range - 2E9 to 2E9)
  2 changes in what the sensor is supposed to measure does not appear in my measurements at all, there is nothing other than the noise (as if I were acquires bad chain - this I double checked)
  I would like to get the same result as in Ni Max, but may not know what wrong with my code (below).

  Thanks for your help,

  Ben

  DAQmx Configure Code
  DAQmxErrChk (DAQmxCreateTask ("LaserReading", & taskHandle));
  DAQmxErrChk (DAQmxCreateAIVoltageChan(taskHandle,"cDAQ1Mod1/ai0","",DAQmx_Val_Diff,-10,10,DAQmx_Val_Volts,));
  DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,,10000,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,5000));

  Starting code DAQmx
  DAQmxErrChk (DAQmxStartTask (taskHandle));

  Reading DAQmx code
  DAQmxErrChk (DAQmxReadAnalogF64(taskHandle,NUM,-1,DAQmx_Val_GroupByChannel,data,5000,&read,));

  TRACE sends the readings to the debug output

  TRACE ('%d points\n acquis', read);
  for (i = 0; i<5000;>
  {
  TRACE("%d\n",data[i]);
  }

  DAQmxStopTask (taskHandle);
  DAQmxClearTask (taskHandle);

  Found the answer to this problem, the problem was in the function TRACE which data acquired to the debugger output. %D %f for the float to TRACE("%f\n",data[i values changed]) - things are great now.

  Thank you

  Ben

• PL/SQL procedure in another scheme gives unexpected result call

  I have a SQL Script that does this:
  Conn pnr / < password of user pnr >;
  Set serveroutput on;
  exec vms.disable_all_fk_constraints;
  SELECT the owner, constraint_name, status FROM user_constraints WHERE constraint_type = 'R ';
  
  and the disable_all_fk_constraints procedure, which is owned by the user 'vms' is defined as:
  create or replace
  procedure disable_all_fk_constraints is
  v_sql VARCHAR2 (4000);
  Start
  dbms_output.put_line ('disable all referential integrity constraints.');
  for rec in (SELECT table_name, constraint_name FROM user_constraints WHERE constraint_type = 'R') loop
  dbms_output.put_line ('Disabling constraint' | rec.constraint_name |) 'from ' | Rec.table_name | '.');
  v_sql: = 'ALTER TABLE ' | Rec.table_name | "DISABLE THE CONSTRAINT ' | Rec.constraint_name;
  execute immediate (v_sql);
  end loop;
  end;
  
  When I run the script SQL, the call to vms.disable_all_fk_constraints disables the FK forced in the schema "vms", while I wanted to disable the FK constraints in schema "pnr" (the applicant of the procedure). I know I could do this job by copying disable_all_fk_constraints to the 'pnr' schema procedure and calling it as "+ exec disable_all_fk_constraints; +"inside, the SQL script but I want to avoid having to duplicate the PL/SQL procedure in each schema that uses it.
  
  What can I do?
  
  Thank you

  Hello

  Create the procedure with AUTHID CURRENT_USER, like this:

  create or replace
  procedure disable_all_fk_constraints
  AUTHID  CURRENT_USER               -- Added
  is
      v_sql VARCHAR2(4000);
  begin
      ...
  

  With AUTHID DEFINE (which is the default), everything that happens inside the stored procedure goes as if the Owers of procedure was done, except that the USER function returns always the name of the actual user.

  Published by: Frank Kulash, January 11, 2011 11:07
  I just see response to Sven. It is true, that it is a very dangerous thing to do.

• How to stop the address bar to give me search results?

  Then just update my firefox. When I type something into the address bar, first of all I give myself a symbol magnifying glass with "suggestions" of what I might be typing. I already have firefox to see the only my bookmarks or Favorites in the address bar, so I don't know why I make suggestions. For example, a bookmark I begins with the letter E, so as soon as I start typing the letter E, the magnifying glass symbol appears and I get a result for ebay. All I want is to type the full address in me or for firefox suggest to my favorites, nothing else.

  This is not the default. If you disable or remove Swag Bucks, this behavior goes away? Disable or remove modules

• FCPX analysis sequences for stabilization, then stabilization rounds off the coast, which escapes me?

  I have the clip in a cam multi format, but I realized that I just couldn't stabilize a multi-cam even, the option was not available. So I went in the multi-cam clip and tried stabilizing angle, cut the part I was using and let the stabilizer integrated to analyze. Once it was completed, it turns the stabilization, and nothing was. I tried again by taking the element of origin of the event, and it's the same thing: analysis of dominant movement, 100%, then stabilization was automatically turns off and I remained without result.

  I guess I'm not understanding something and there is a reason that this clip will not stabilize, so I was wondering if anyone would be able to explain and if there is a work around, or if maybe it's a bug which is known.

  Thank you for taking the time to read my post, all the answers are appreciated!

  AAre activate you the stabilization or just run a scan?

• A40 turns off after 2 minutes during unexpected recovery

  My A40 off unexpectedly after about two minutes, so I used the recovery disk to reinstall to factory settings. I changed the battery but no solution any that any idea what I can do or is this a return to the use of base.

  Hello

  You have this problem using just battery or the AC power adapter too? If you are installing recovery, do please if the laptop is plugged into the AC adapter / CC.

• String is rounded off the coast

  I used:

  http://forums.NI.com/T5/LabVIEW/how-to-read-serial-data-from-Arduino-using-LabVIEW-visa/TD-p/1497866...

  VI and did the editing. Use of LabVIEW to arduino. I already have the data I needed. I get a data of 33.75 that output will be 34. What I need is to get the data with the decimal point without rounding downwards or upwards.

  Ive attached the VI.

  Help, please! Thank you!

  Use a string of Frac/Exp number instead of a decimal string to number.  The decimal string number gives you an integer, so it rounds.

• Unexpected result when saving image of façade in EXE

  Below the code is used to save a picture of the façade of a VI. The façade has a XY Chart with two plots.

  

  It works perfectly in the development environment. With the exe, the plots of the graph (only the plots) are invisible.

  Have you ever watched this unexpected behavior? Thanks a lot for any advice.

  JB wrote:

  Problem solved.

  It was a mistake "too stupid to be mentioned here" of mine. Things that can happen at the end of a day (too) long.

  If anyone knows how to avoid grey areas on the right and bottom of the image, I am always interested.

  It appears only when the 'visible zone?' option is set to TRUE.

  I didn't try, but I suggest that you try to define horizontal and vertical scrollbars to always off.

  Ben64

• Unexpected results after calculation

  Hello.

  I have 3 databases of production which have worked successfully until Thursday.

  FARM sales for the whole company per month.

  EB2. Sale of a specific division a week.

  EB3. Sale of a specific division and top ranges, per day.

  Thursday.

  The problem is that after calculation of EB3, the totals I see in the validation reports are incorrect when compared with the totals in the EB1.

  The whole story is the display of incorrect results, not only the data for the current month, which is that I charge per day.  I'm doing an incremental loading of the current and previous month only.

  I took a backup and loaded in the EB3 and performed the calculation... once again the totals were incorrect.

  Friday

  When I compare the validation reports, totals in EB3 were as expected when checking against the EB1.

  I did nothing for the outline, the backup is the same.

  EB1 and EB2 were ok.

  Saturday (today)

  When I see the validation report today I noticed that EB3 has the same behavior; incorrect results.

  And EB2 also contains unexpected values after calculation.

  Have you encountered this problem before?  Is there something specific I should review to determine and solve this problem?

  Log files reflect not any message "error" or "fail".

  Any comment is welcome.

  Kind regards

  JC

  Difficult to clarify the question without knowing what actually do the calculations. Just a suggesiton wild as you see error every day replacing when you see good results just make a backup of contour and then use the problematic day contour compare to compare 2 contours. May be there are some jobs that you are not aware of the evolution of the sketch, thus destabilizing the whole of the data!

• Unexpected results - unique Triple returns 2 results using SEM_MATCH

  Hi, I have a prototype that I build. I start with a very simple triple store that says:
  

  (<http://ihc.com/drik/concept#clinical_cohort>, <http://www.w3.org/2000/01/rdf-schema#subClassOf>, <http://ihc.com/drik/concept#cohort>)

  I have run the following expected to retrieve a result (URI by cohort), but I'll be back 3 results:
  

  select
    object
  from 
    table(sem_match('{ <http://ihc.com/drik/concept#clinical_cohort> <http://www.w3.org/2000/01/rdf-schema#subClassOf> ?object . }', 
          sem_models('Prototype'),
          sem_rulebases('RDFS'),
          sem_aliases(sem_alias('rdfs','http://www.w3.org/2000/01/rdf-schema/')),
          null
          ))

  http://ihc.com/drik/concept#cohort
  http://ihc.com/drik/concept#clinical_cohort
  http://www.w3.org/2000/01/rdf-schema#Resource

  Can you help me understand why I get the self-reference? Is clinical_cohort a subclass of itself? It seems counterintuitive to me. I understand the subclass of resource and I'm okay with that.
  
  Script to reproduce is:
  

  CREATE TABLE DRIK.RDF_DATA
  (
    ID      NUMBER,
    TRIPLE  MDSYS.SDO_RDF_TRIPLE_S
  )
  COLUMN TRIPLE NOT SUBSTITUTABLE AT ALL LEVELS
  TABLESPACE RDF_USERS
  ;
  
  -- Staging Table
  CREATE TABLE DRIK.RDF_STAGING
  (
    RDF$STC_SUB        VARCHAR2(4000 BYTE)        NOT NULL,
    RDF$STC_PRED      VARCHAR2(4000 BYTE)        NOT NULL,
    RDF$STC_OBJ        VARCHAR2(4000 BYTE)        NOT NULL,
    RDF$STC_SUB_EXT    VARCHAR2(64 BYTE),
    RDF$STC_PRED_EXT  VARCHAR2(64 BYTE),
    RDF$STC_OBJ_EXT    VARCHAR2(64 BYTE),
    RDF$STC_CANON_EXT  VARCHAR2(64 BYTE)
  )
  TABLESPACE RDF_USERS
  ;
  
  begin  SEM_APIS.CREATE_RDF_MODEL('Prototype', 'RDF_DATA', 'TRIPLE', 'RDF_USERS'); end;
  
  grant insert on rdf_data to mdsys;
   
  Insert into DRIK.RDF_STAGING
     (RDF$STC_SUB, RDF$STC_PRED, RDF$STC_OBJ)
   Values
     ('<http://ihc.com/drik/concept#clinical_cohort>', '<http://www.w3.org/2000/01/rdf-schema#subClassOf>', '<http://ihc.com/drik/concept#cohort>');
  COMMIT;
  
  begin SEM_APIS.BULK_LOAD_FROM_STAGING_TABLE('Prototype', 'DRIK', 'RDF_STAGING'); end;
  
  select id, a.triple.GET_TRIPLE() from drik.rdf_data a;
  
  begin SEM_APIS.CREATE_ENTAILMENT('PROTOTYPE_RB_IDX', SEM_Models('Prototype'), SEM_Rulebases('RDFS')); end;

  Hello

  What is expected. Rule RDFS10 in the following W3C SPECIFICATION dictates this behavior.
  http://www.w3.org/TR/rdf-mt/

  If you don't like (or wants to) this rule, then you can turn it off.

  SEM_APIS. CREATE_ENTAILMENT ('PROTOTYPE_RB_IDX',
  SEM_Models ('Prototype'),
  SEM_Rulebases ('RDFS'),
  SEM_APIS. REACH_CLOSURE,
  "RDFS10 -"
  );

  There are a few other rules, you may want to disable (turn off).
  "RDFS12-, RDFS4A-, RDFS4B-, RDFS6-, RDFS8-, RDFS10-, RDFS13 -"

  Thank you

  Zhe Wu

• Export PDF version 1.3 in unexpected results results

  Using InDesign CS5.5 - and Acrobat X - more export file size small, change to 4 (1.3) PDF [instead of the 6 PDF (1.6)]

  As always, I choose smaller file for the Web.

  I chose Acrobat PDF 4 (1.3) and then a text off the page... but only on a single page... (FIGURE 2)

  And on another Page, the text was also reproduced on the head of the race of the reverse of spread. (FIGURE 1)

  I then tried the print PDF settings that I ALWAYS use - which is to flatten transparency (see Figure 3)

  The passage of text is currently happening on TWO pages - and also the head of the race is duplicate it onto TWO pages now too - it's even worse than Web PDF.

  I need to flatten transparency in these PDFs - simply because I need, not really need to go into the details. I don't see how being flat or leaving dynamic transparency could affect the position of a block of text anyway?

  Any ideas?

  

  Figure 1

  

  Figure 2

  

  Figure 3

  After a few rounds of testing different things:

  I applied a master of None for all pages - and the pages exported correctly.

  I reapplied all master pages to the various pages as needed. And even once it has exported incorrectly.

  I deleted all Pages master - recreated them and reapplied them - and that's all works normally.

  Cause appears to be a sort of corruption with Master Pages.