Route out of two blocks.

Similar Questions

• Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Photoshop CS4 - is - does anyone know how to find out if two people use the same file?

  Yes, I assumed that was the case, and I thought that this link addressed to her.  I would have thought it was more a function of your network and the OS than Photoshop.

• Trigger validation key in two blocks in a data module

  Hello
  
  I would like to have a clear idea on works trigger the validation key to the level of data block.
  
  I have a module that contains two blocks of data Block1 and block2 and eah block for example, I've defined respectively the trigger key validation as follows:
  
  tirgger key validation (Block1)
  
  Begin
  
  if condition1 then
  raise forms_trigger_failure;
  end;
  
  commit_forms;
  
  end;
  
  tirgge key validation (block2)
  
  Begin
  
  If condition2 then
  raise forms_trigger_failure;
  end;
  
  commit_forms;
  end;
  
  My question is:
  
  When I make changes in blocks (Block1 and block2) and press the save button, one of the tirigger in fires level data block and so one of the validation is the skikpped (condition1 or condition2) according to the update where it is.
  
  Is it not better to use only the validation key in the module level instead, and if this is the case, why the oracle forms let us ppersonalize ky-validation of data block level.
  
  Thank or for your advice.

  When I make changes in blocks (Block1 and block2) and press the save button, one of the tirigger in fires level data block and so one of the validation is the skikpped (condition1 or condition2) according to the update where it is.

  The Module level trigger is the best option in this case and you will need both your test conditions before calling t_Form() Commi.

  Is it not better to use only the validation key in the module level instead, and if this is the case, why the oracle forms let us ppersonalize ky-validation of data block level.

  Generally, you will find a trigger key validation only at the Module level, but because there are times when it makes sense to put the trigger at the block level. Also, depending on the properties of the trigger, Oracle Forms will run the first block-level triggers, then it executes a trigger level of Module of the same name. It really depends on the developer and how they want to organise/organize their code. The tool simply allows you to put the code where will she be better tailored to your needs.

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

• Two blocks using the same Web

  I'm working on a program of forms for some users will be investigation only table X, but others will be able to update not all but some of them, most delete records, but not insert.
  The new form a trigger will focus on the user account, then go_block to (survey only) Block1 or Block2 (authorized update).
  The two blocks contain the same elements, but the properties are different. Both are set to the same canvas.
  __
  In the canvas, both sets of fields are super imposed on the other. How to trigger
  User survey: visable Block1, Block2 not
  User update: visable Block2, block 1, no?
  __
  I could have separate canvases, but I thought that it would save some time if I only had to maintain a.
  __
  Thank you
  Sandy

  WHEN_NEW_FORM_INSTANCE fires when you open the form (after the opening session, but before the block operations, as the query).
  in a block of several ranks, the integrated SET_ITEM_PROPERTY changes the properties of all the elements (all recordings), SET_ITEM_INSTANCE_PROPERTY for a single element of a defined line.
  Maybe it is enough to change the properties of a block like this:

  IF USER = 'A' THEN
      SET_BLOCK_PROPERTY('A', INSERT_ALLOWED, PROPERTY_FALSE);
      SET_BLOCK_PROPERTY('A', UPDATE_ALLOWED, PROPERTY_FALSE);
      SET_BLOCK_PROPERTY('A', DELETE_ALLOWED, PROPERTY_FALSE);
  ELSE
      SET_BLOCK_PROPERTY('A', INSERT_ALLOWED, PROPERTY_TRUE);
      SET_BLOCK_PROPERTY('A', UPDATE_ALLOWED, PROPERTY_TRUE);
      SET_BLOCK_PROPERTY('A', DELETE_ALLOWED, PROPERTY_TRUE);
  END IF;
  

• FRM - 40202:Field must be entered on two blocks with the same table

  I have two blocks, blockA and blockB, both from the same table that is tableX.
  
  When I ask of blockA and it worked, then I go to blockB and modify data, and save, there is no problem. But when I do not run the query of blockA or if the query did not return any results, I go to blockB and change some data then save, I got this error. The cursor then go to first blockA point. So now, I have to delete this empty line before the Save.
  
  
  Any suggestion?

  you set a few initial values programmatically for a block?
  in this case, the status changes to INSERT and you will get this message.
  You can check the staus with GET_RECORD_PROPERTY (1, "A BLOCK", STATUS), e.g. with the trigger KEY-COMMIT.

• How to create a relationship between two blocks

  Oracle forms 6i
  Hai All
  
  I've created a form that I have four button ADD, QUERY, SAVE, EXIT.
  
  I have two block named head and members.
  
  Four Chief areas namely block unitid, deptcode, codeno name.
  
  When I pressed the query button, and the cursor goes to the Chief name field when I enter the name of the leader and click
  
  Enter I give the codeno, the deptcode and the unitid of the leader_name.
  
  so now, I created another block in a tabular structure to bring members in the same deptcode that belongs to Leader_name.
  
  So pls tell me the steps how to create the relationship between these two blocks.
  
  
  When I enter the leader_name and gives enter need to bring the codeno, the deptcode, the unitid and
  
  I also need to give the members of this deptcode...
  
  
  Thanks in advance
  
  Srikkanth.M

  To write, only State a selection:

   :blk2.item = :blk1.item
  

  François

• How do I route out of the VRF to the global table

  How to build static routes (two-way) between the VRF and the overall table?

  Cat 6509

  12.2 (33)

  Single VRF, Full BGP. EIGRP inside the VRF.

  I do not have a 6509

  but on IOS, you attach the word 'global' key to the VRF road, and on the incoming Interfaces, I created a policy map to send traffic to the vrf.

• Router firewall does not block traffic

  Hello

  I use vmware view Home 4.6 client.  I can authenticate and connect to a windows image 7, but only a black screen appears.  After about 30 seconds it disconnects with the error "the connection to the remote computer has ended."

  If I disable my billion router firewall, the machine virtual windows 7 appears and everything works as expected.  I tried port forwarding 4172 and 5002 but still does not work.  Then I tried port forwarding 50000 to 65000 I saw various 50456 to 64652 ports in firewall logs.  TCP and UDP are enabled in both cases, but no luck.

  Here is the part of the firewall log:

  04 August 23:01:38 home.gateway:firewall:info: 476378.910 blocked Prot = 17, 192.168.1.1:56143 > 10.100.200.1:137 - default defense

  04 August 23:01:38 home.gateway:firewall:info: 476378.910 blocked Prot = 17, 192.168.1.1:52771 > 10.100.200.1:137 - default defense

  04 August 23:01:38 home.gateway:firewall:info: 476378.910 blocked Prot = 17, 192.168.1.1:64632 > 10.100.200.1:137 - default defense

  192.168.1.1 is my computer and 10.100.200.1 is my domain controller from work.

  I then tried to create a packet filtering rule to allow 4172, then 50000 to 65000, but nothing worked.  To disable the firewall of the router or select the parameter of low security for her is the only way to operate.  The default medium security setting blocks the traffic.

  Router is a VGP 7301 billion.  Any advice would be much appreciated.  Thank you.

  Hello

  Im sorry im not familiar with this particular modem however I got something similar on my draytek at home. Mine to connect for a few seconds, and then stop working.

  I discovered that it was because my BACK settings on my modem have been set to protect against a stream of UDP. I was able to disable then part of security BACK settings and then it worked ok.

  Maybe it's the little, you have problems with that. I have no port forwarding on my configuration, and im sure I wasn't leaving the installation rules, all incoming traffic is blocked.

  I hope this helps.

  See you soon

  Phil

  [Edit]

  Just checked, I 32111 outgoing tcp (redirect usb) and also 4172 TCP/UDP outgoing (pcoip). Nothing, nothing allowed incoming traffic.

• JavaScrip point sum and control set out to two decimal point.

  My what. corresponds to the javascrip for part of the sum and check out put to two decimal
  
  Summary of the item tax amount I use javascrip code in the following HTML header
  
  function sumst()
  {
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P25_TAX_AMT').value = Math.round)
  ((getVal ('P25_TXBL_AMT') * getVal('P25_STP')/100)) ;
  
  
  }
  
  
  Therefore, turn off
  
  
  Or
  
  
  function sumst()
  {
  function getVal (item) {}
  If ($x (point) .value! = "")
  Return parseFloat ($x (item) .value);
  on the other
  return 0;
  }
  $x('P25_TAX_AMT').value =.
  (getVal ('P25_TXBL_AMT') * getVal('P25_STP')/100);
  
  
  }
  
  
  Result in more then three comma
  
  
  The amount of my Net is 98089.80
  Tax rate 4%
  the amount of tax 3924 when I use Math.round
  or
  If I do not use Math.round amount of tax is 3923.592
  
  I do not result 3923.59?
  
  What a change I do in my javascript to get above result i.e. 3923.59
  
  My current worm of the Summit is 3.2

  As far as I know, Math.round works what follows (pseudo) way:

  Math.round((A * B) * 100) / 100
  

  In other words, you need to multiply a number by (10 power number_of_decimals) and divide this product with (10 power number_of_decimals).

  Finally, this means that you can try with

  $x('P25_TAX_AMT').value =
    Math.round(($x('P25_TXBL_AMT').value * $x('P25_STP').value) * 100) / 100;
  

• CS5 - most effective way to wire and independent streams of two blocks of text in the same document?

  Greetings...

  I am responsible for creating a 100-page instructor guide and I looking for a little guidance in the use of independent text blocks that thread the length of the document.  The idea behind the use of two columns, is that the first column (left) must be used for the notes 'instructor-only', advice, etc..  The second column (right) should be used for the text of the student guide.  Two columns (or blocks of text) would need to move independently of each other.  In other words, when the left column is filled with text placed on the page, the flow of additional text in the left column on page two, left column on page three, etc.  Same thing applies to the right column.  There is no link or thread of the text between the two columns on the same page.

  I tried to reproduce this in a two-column table format, however, the table row height is limited and overset text will not continue the table in the block of text on the next page.

  Thank you in advance for your help!

  Set up master page text frames.

  If you use facing pages, put on the student to the student and executive trainer instructor on master pages.

  Be very careful when your document is redéroule however. Take a look at this discussion, we had recently on the subject:

  http://forums.Adobe.com/message/3588735#3588735

  HTH,

  Substances

• Why can I not now zoom in or out with two fingers on my macbook mouse pad?

  Zoom in and out now does not work. It is however with other programs and applications.

  Some actions have been removed in versions of Firefox 4 +.

  You can restore the zoom feature by changing the related values of downtown on the topic: config page.

  • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
  • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
  • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
  • Browser.Gesture.Pinch.Latched-> false

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• you guys are asking users to microsoft telling them of a virus that will come out in "two days."

  I was called a dozen times by an Indian woman telling me that it works for you guys (microsoft) and that if we do not follow his instructions, we will get a virus in the next two days

  Hello

  Its a SCAM!

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• router cannot be configured. blocked for hours here.

  Hi, I recently changed my ISP. I tried to use the router with the same settings as my previous ISP, but it didn't connect. I have reset the router, ran the installation cd, and before setting the admin password, it detected initially as dhcp internet connection. I put the password, could load google. then it came to a point where there was sure easy installation in which I had to press the button in the router (that I didn't because it was not any signal in the statement to do).

  I refreshed the page and google no longer charge. I opened a new tab, but in vain.

  I have reset the router, followed by the installation and at this point eversince, it detects the connection as an ip address static (step 8). I changed it to dhcp, but the error message saying that the router cannot connect to the internet. I have reset the router all over again, but the same problem occurs.

  My question for everyone is, is there a way so that the router can detect the internet connection as dhcp? Sorry for the long post, but I must detail the problem and air my frustration.

  any help will be greatly appreciated.

  I called linksys free of charge and the problem was the internet light on the router is not light, so the agent told me that it be replaced.

• only an ethernet plug in my router but need two cables!

  I have a wireless router with only a single ethernet cable plug, but I need to connect a second cable ethernet to a second computer in my house! what I have to buy that this is possible?

  Hello

  You can check with the local store of Tech for a network splitter that will allow you to connect multiple cables to the router, but it is not recommended because the speed of the network will decrease because the data will be shared.

  You can also try to buy a router with multiple ports.

  For more details on routers, you can contact the manufacturer of routers.

• I reset my router, now my two wireless printers will not print wireless.

  I reset my router and now none of my HP printers can print wireless.  They print with a USB key, but the installation program for the Wireless does not detect my wireless network.   I use an iMac and Airport extreme router.

  I have a different brand printer that works wirelessly now.  I don't understand why HP printers attached to the network.  Printers are c4780 and 4500.

  I tried your solution but still could not solve the problem.  I called HP support.  After a few minutes they determined that since it was an old printer and I recently updated my software on the computer and did a upgrade to the router, when I reset the router was not compatible with my printer.  They also suggested that I try with an old computer,.

  So, I ordered a HP OJ8600 at a great price and will move the printer on another computer.

  So Bravo are so your information, even if it was my fault for failing to provide more complete information, and given that the printer works somewhere else and I have a compatible printer on the way, I consider that this problem is solved.

  Thank you very much for your help.  I appreciate it.