Router firewall does not block traffic

Similar Questions

• Firewall does not block the pseudonyms

  My problem is exactly that. I have windows Vista Home Basic and aol 9 1 vr. no probs with internet explorer. uninstalled and reinstalled aol doz times. When I use my pseudonyms I get to aol, but cannot access all sites and lost my favorites.  Yet when I log in as a guest, I can use my pseudonyms and retrieve my favorites and access all the sites.  I ran macfee and they found and quarantined a virus.  I disabled the windows firewall and re-installed aol and went straight to aol and had no problems to access the sites and all my favorites.   used for one hour, signed. went back an hour later and found the same problem when I signed. no access to aol not only sites of favorites.  then as guest active windows firewall and I'm here.  can someone help me thanks

  Hi towbar19,

  This issue sounds like it is linked in the name of the screen; You can follow the steps mentioned below to refine the question:

  1. open Windows Firewall by clicking the Start button, click on the Control Panel, clicking Security, and then click Windows Firewall.

  2. in the left pane, click on allow a program through Windows Firewall.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the check box next to the program (AOL) , you want to allow, and then click OK.

  Note: You allow a program through the firewall of windows only if you trust that particular program.

  Before allowing a program through the firewall, make sure you understand the risks involved. For more information, see What are the risks of allowing programs through a firewall?

  If the problem persists, please contact AOL for more help

  http://help.AOL.com/help/microsites/microsite.do

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Sorry I forgot to paste the link in the previous answer,

  Here's the link - Preview fails in muse

  Kind regards

  _Ankush

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?

  How can I make sure that any firewalls (versions of software or hardware) does not block port 443 to access?

  Hi Anna_753,

  Usually, you would receive messages from any program if it is impossible to access the port.

  If you want to check if the port is accessible, then you will need to check the firewall settings.

  Each firewall has its own parameters for ports of the computer.

• I get multiple copies of an e-mail sent 5 / 2 09:26, and it does not block receipt of all subsequent emails. How can I fix it?

  I get multiple copies of an e-mail sent 5 / 2 09:26, and it does not block receipt of all subsequent emails. How can I fix it?

  Use the webmail and sign in to your account and delete this mail

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows Firewall does not, what to do

  I install windows xp pro - and the firewall does not open. What can I do?

  Hello

  • What happen when you try to turn on the firewall?
  • You receive an error message?

  You can view these methods:

  Method 1:

  You can try to reset the winsock.
   
  To repair and reset the winsock in Windows XP. 
  1. click on the Start button.
  2. type Cmd in the search text box.
  3. right click on cmd.exe and command prompt run as administrator. Allow elevation request.
  4 type netsh winsock reset at the shell command prompt, and then press the Enter key.
  Restart the computer.

  Method 2:
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
   

• Half of the programs receive the error message: a firewall is not blocking the connection.

  Something stops halfway through my work programmes all have the same error message: a firewall is not blocking the connection, but I No. firewall installed and windows firewall to the wide.

  1. • 
       If possible answer to: * e-mail address is removed from the privacy *.

  its possible that there are firewalls running in the background,

  in particular, if you had installed firewall but they have not uninstall cleanly.

  In addition, some modems also have a firewall.

  Here are my steps to perform a clean boot:

  http://pcsmarties.WordPress.com/CleanBoot/

• my firewall does not work in windows xp sp3! ??

  my firewall does not work in windows xp sp3! ??

  What kind of error do you get?

  It could be the problem with malware infection or Firewall Service, try to run full scan with:

  http://OneCare.live.com/site/en-us/default.htm

  And remove all malware and see the result.

• Windows Firewall does not start

  My firewall does not start.  It gives the service specific error code 13.  Tried to manually start the service, no luck.  Also checked the dependencies, all not working no chance. Looking for spyware and viruses.  No luck.  Searched everywhere on the internet solutions and found only dead ends.

  The Windows Firewall service completed with error 13 (0xD) special service.

  Thanks for any help.

  E-mail address is removed from the privacy *.

  Hello Bill,

  Thanks for posting on the Microsoft answers Forum.

  It seems that you have studied this question, but I have a few questions to help you troubleshoot.

  • When the firewall service has failed to start?
  • You have errors in the log of events dealing with the firewall service? Check the system and safety and the Application event log.
  • The Firewall Service is set to automatic? She is arrested or if it is in a State of waiting? Is the journal on the expected system Local?
  • Please check the remote procedure call Service and the Base Filtering Engine Service is started and set to automatic.
  • You have any 3rd party firewall in place in addition to the Windows Firewall?

  Please let me know the results, so I can continue to help you.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Firewall does not work

  I have windows vista sp2. I also have MS security essentials.

  I don't know why, the windows firewall does not work on my computer.
  I also tried to start from the services application.
  Help, please.
  Thank you
  Follow these instructions to fix the Windows Firewall:
  Download and install repair Windows:
  http://www.TechSpot.com/downloads/5314-tweaking-Windows-repair.html
  When the repair of Windows opens, click start repair , click Start. Unselect all the boxes except for the following:
  -Reset the registry permissions
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian