router cannot be configured. blocked for hours here.

Similar Questions

• Rescue and recovery blocks for hours at 0% of backup

  Hello

  My R61 ran quite OK, but slower over time. I got through rescue and recovery made a backup of the entire system on an external hard drive. (I had come back to XP and recently did a total system backup on the external HD). So I haven't started the rescue and recovery, thinking that he should simply reinstall it previously saved system. Alas at step 2 the progress of rescue and recovery, the new generation of the system stopped. Black screen with the message: «backup system is...» 0 % ». Here I wait for hours. Nothing progesses.

  What should I do? Island of 'progress' is already happening for 6 hours! (I see that my external HD flashes from time to time, but the computer does not seem to do anything).

  What should I do? I fear that if I press the power button to restart the computer, I will plant it completely.

  Please help me!

  Thanks in advance

  Roger

  Rescue and recovery hung several times for hours. Yet, it seemed to work after 20 hours. Puhhhh...

  Lenovo at: Your UI during the rescue and recovery process is ineffective. He left me without any feedback for hours. Almost, I rebooted the computer during critical backups. Here you certainly should help the user to understand what to do and what not. How can I find out, it's OK to have a bar saying 0% progress made for 8 hours.

  Even now, I don't know what to do. The computer restarts, windows is OK. But now I can turn off the computer or is always something during rescue and recovery. The last time, he says, it is step 2 on a total of 5 steps. Is it still now something in the back? The rescue is complete? Where is the message telling me, he did the job.

  All users: be patient, do not hit anything it either by running a rescue and recovery.

  Lenovo: By the way, I had - after installing my computer with xp - makes a backup of the system. that I repeated it several times. When my HD arrived full, I remove some of the older versions, because anyway, I had the newer versions which worked perfectly. Alas, I didn't, which obviously rescue and recovery done a system save, later versions are simply updated. By removing the first version, I lost all the! So, I ended up having no actual backup of a validating at the beginning.  In short: Rescue and Recovery can be a tool very well for an IT expert. For the average user, there are much too many traps. Lenovo: Try to it you like-centered-design user instead of the user Board Chinese garbage, if in the future, you want to keep as «almost IBM» brand name For me, Lenovo - in this regard - is more "almost Chinese It-garbage".

• Updates Windows 7 blocked for hours of updates

  Hello, I have problems with windows update stuck for hours of updates.  The last time I've updated from windows was February 2016.  Since all of this is control.   I tried a lot of bugs, and nothing works.  Can someone help me please.  I like to keep my OS updated for security etc.

  Thank you

  Try to install manually

  Windows Update Client for Windows 7 and Windows Server 2008 R2: March 2016
  https://support.Microsoft.com/en-us/KB/3138612

  and reboot.

  If she will not help check the items:

  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  You cannot install updates
  https://support.Microsoft.com/en-us/KB/2509997

• ERROR: Cannot get the size of the logical block for spfile

  Ran across the following error in the log of alerts for a the 2 node RAC database:

  ERROR: Cannot get the size of the logical block for spfile "+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora".

  Looked in MOS and found nothing.  Has anyone go through this before?  If so, what is the cause?

  Just received a resolution of Support from Oracle.  They said that this is a benign error and can be ignored.  Here is their answer to my SR:

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  OK, after reviewing all that there seems to be no problem to fix. All configurations are correct. We believe that these errors are benign and can be ignored.

  COMMENTS

  ===============

  -L' ASM instance is online.

  -The Diskgroup: + XXXXXX_SYSTEM is mounted and has the physical and logical of 512 bytes sector size.

  -No error message in the alerts ASM journal.

  In light of the facts above, the message "ERROR: could not get the size of the logical block for spfile" seems benign and can be ignored.

  However, to avoid these messages, as a workaround, you can try creating the spfile pfile '+ XXXXXX_SYSTEM/XXXXXX/spfileXXXXXX.ora' and then try to create spfile diskgroup + XXXXXX_SYSTEM using this file pfile.

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• Update cache - unexpected error of blocking for the repository & oracle.webcenter.framework.service.RepositoryVersion cannot be cast to oracle.webcenter.framework.service.RepositoryVersion

  Hello

  I noticed that the following errors appear often in my custom portals managed servers. Can anyone tell why these errors appear as I applied all the necessary patches?

  Oracle WebCenter Suite 11 g 11.1.1.8.0 portal applied Patch 21281035

  < 11 November 2015 11:00:08 SGT > < error > < oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer > < WCS-55198 > < Cache update - unexpected error of blocking for the repository.

  java.lang.ExceptionInInitializerError

  at oracle.webcenter.content.internal.stellent.VCRConfigProvider.getRepositoryConfig(VCRConfigProvider.java:99)

  at oracle.webcenter.content.integration.federated.internal.delegate.RepositoryHelper.getRepositoryConfig(RepositoryHelper.java:601)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.getBinaryCache(CacheHelper.java:56)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.flushAllBinaryCacheEntries(CacheHelper.java:254)

  at oracle.webcenter.content.integration.federated.ContentCacheHelper.flushAllBinaryCacheEntries(ContentCacheHelper.java:54)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateNodeEntry(UCMCacheHelper.java:175)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateCacheEntries(UCMCacheHelper.java:138)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdater.updateCaches(UCMCacheUpdater.java:83)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer.run(UCMCacheUpdateTimer.java:105)

  at java.util.TimerThread.mainLoop(Timer.java:555)

  at java.util.TimerThread.run(Timer.java:505)

  Caused by: java.util.MissingResourceException: can't find oracle.webcenter.content.integration.internal.logging.VCRLogger bundle

  at java.util.logging.Logger.setupResourceInfo(Logger.java:1537)

  to java.util.logging.Logger. < init > (Logger.java:267)

  at java.util.logging.LogManager.demandLogger(LogManager.java:433)

  at java.util.logging.Logger.demandLogger(Logger.java:346)

  at java.util.logging.Logger.getLogger(Logger.java:442)

  at oracle.adf.share.logging.ADFLoggerFactory.getADFLogger(ADFLoggerFactory.java:63)

  at oracle.adf.share.logging.ADFLogger.createADFLogger(ADFLogger.java:221)

  to oracle.webcenter.content.integration.RepositoryException. < clinit > (RepositoryException.java:31)

  at oracle.webcenter.content.internal.stellent.VCRConfigProvider.getRepositoryConfig(VCRConfigProvider.java:99)

  at oracle.webcenter.content.integration.federated.internal.delegate.RepositoryHelper.getRepositoryConfig(RepositoryHelper.java:601)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.getBinaryCache(CacheHelper.java:56)

  at oracle.webcenter.content.integration.federated.internal.delegate.CacheHelper.flushAllBinaryCacheEntries(CacheHelper.java:254)

  at oracle.webcenter.content.integration.federated.ContentCacheHelper.flushAllBinaryCacheEntries(ContentCacheHelper.java:54)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateNodeEntry(UCMCacheHelper.java:175)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheHelper.invalidateCacheEntries(UCMCacheHelper.java:138)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdater.updateCaches(UCMCacheUpdater.java:83)

  at oracle.webcenter.content.integration.spi.ucm.UCMCacheUpdateTimer.run(UCMCacheUpdateTimer.java:105)

  at java.util.TimerThread.mainLoop(Timer.java:555)

  at java.util.TimerThread.run(Timer.java:505)

  < 11 November 2015 11:01:07 SGT > < WARNING > < oracle.webcenter.notification.internal.model.util.FrameworkUtils > < BEA-000000 > <

  java.lang.ClassCastException: oracle.webcenter.framework.service.RepositoryVersion cannot be cast to oracle.webcenter.framework.service.RepositoryVersion

  at oracle.webcenter.framework.service.ServiceContext.getRepositoryVersionObject(ServiceContext.java:1283)

  at oracle.webcenter.framework.service.ServiceContext.getRepositoryVersion(ServiceContext.java:1185)

  at oracle.webcenter.framework.service.ServiceContext.isRepositoryVersionGreaterThanOrEqualTo(ServiceContext.java:1221)

  at oracle.webcenter.peopleconnections.profile.internal.extension.ProfileService.isConfigured(ProfileService.java:41)

  at oracle.webcenter.framework.service.ServiceRegistry.getAllConfiguredServices(ServiceRegistry.java:213)

  at oracle.webcenter.notification.internal.model.util.FrameworkUtils.loadServiceActivityTypes(FrameworkUtils.java:94)

  to oracle.webcenter.notification.internal.model.NotificationServiceImpl. < init > (NotificationServiceImpl.java:109)

  at oracle.webcenter.notification.NotificationServiceFactory.getNotificationService(NotificationServiceFactory.java:89)

  at oracle.webcenter.notification.internal.model.LifecycleListener.contextDestroyed(LifecycleListener.java:68)

  at oracle.webcenter.framework.internal.view.WCFrameworkContextListener.contextDestroyed(WCFrameworkContextListener.java:208)

  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:482)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.servlet.internal.EventsManager.notifyContextDestroyedEvent(EventsManager.java:200)

  at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:3225)

  at weblogic.servlet.internal.ServletContextManager.destroyContext(ServletContextManager.java:247)

  at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:461)

  at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:1545)

  at weblogic.servlet.internal.WebAppModule.deactivate(WebAppModule.java:509)

  to weblogic.application.internal.flow.ModuleStateDriver$ 2.previous(ModuleStateDriver.java:387)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.flow.ModuleStateDriver.deactivate(ModuleStateDriver.java:141)

  at weblogic.application.internal.flow.ScopedModuleDriver.deactivate(ScopedModuleDriver.java:206)

  at weblogic.application.internal.flow.ModuleListenerInvoker.deactivate(ModuleListenerInvoker.java:261)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 2.previous(DeploymentCallbackFlow.java:547)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:192)

  at weblogic.application.internal.flow.DeploymentCallbackFlow.deactivate(DeploymentCallbackFlow.java:184)

  to weblogic.application.internal.BaseDeployment$ 2.previous(BaseDeployment.java:677)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:223)

  at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:215)

  at weblogic.application.internal.BaseDeployment.deactivate(BaseDeployment.java:234)

  at weblogic.application.internal.EarDeployment.deactivate(EarDeployment.java:59)

  at weblogic.application.internal.DeploymentStateChecker.deactivate(DeploymentStateChecker.java:198)

  at weblogic.deploy.internal.targetserver.AppContainerInvoker.deactivate(AppContainerInvoker.java:98)

  at weblogic.deploy.internal.targetserver.operations.DeactivateOperation.deactivate(DeactivateOperation.java:78)

  at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:306)

  at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)

  at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)

  at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)

  at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)

  at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)

  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)

  in weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$ 100 (DeploymentReceiverCallbackDeliverer.java:13)

  to weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$ 2.run(DeploymentReceiverCallbackDeliverer.java:68)

  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:545)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  >

  Hello

  Please apply the MLR 14 and check the box.

  If the problem persists, please update us with the WCC and newspapers of WCP.

• cannot delete an external hard drive. stuck to decrypt for hours

  I tried to erase and reuse a disk that was previously encrypted.  Disk utility tells me.

  Clear process failed:

  Dismounting drive, could not open the device. Operation failed... »

  I tried several suggestions from other threads, as drive reboot, restart computer, terminal commands.

  The the terminal commands that worked for others used sudo, but all that entered with sudo request my password, but then nothing that I type in the show even upward.

  Have deleted everything on the disc using the Finder, I receive a new empty file called System.

  Finally, I tried decrypting that happened for hours even if there is nothing else the file system to empty the disk.

  Any suggestions?

  I tried to respond to that to explain how it worked but it never published and there was a warning that "gray someone has been banned", I don't know what's happened since as I answered my same MacBook pro, but I'll try again.

  ******************************************************************************** **************

  After 8 hours, I think that it finished finally decipher and I was able to use disk utility to erase.

  So in case anyone else has this problem, I suggest that you may need to wait several hours so he can decipher and then another? hours to encrypt again. I don't know how long because I fell asleep.

• My account has been compromised once again. -Cannot recover after I send an email to technical support, has been blocked for more than a week.

  Blocked for more than a week, still no unlock after you follow each step the helpdesk had sent me. I have a lot of important emails in the compromised account, especially the email of my National Service Portal.

  Hello

  I'm sorry that you are having problems but the answers is a peer group supported
  and unfortunately has no real influence on Hotmail or Windows Live Mail - if the problem
  is one of these. If this is not the case, check with the help of the the email provider.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  ============================

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

• Step 2 install upgrade blocked (files collection) to 89% for hours. ... help!

  I finished step 1. Moved in step 2, complete "copy Windows files" but now my computer is stuck at 'Assembly of the files' now for hours. (literally, 10 hours). What should I do now?

  Post in this forum instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot save settings: unable to create a configuration file for the required configuration object

  When I try to open the application in the administrator account it say - could not save the settings: unable to create a configuration file for the required configuration object

  Thanks for the reply.i think that a virus changed I scan my computer and discovered C:\users\jason\AppData\local\temp\low\temporary internet files\content. IE5\TLIFXGRH\ why is Task Manager disabled people [1]

• Cannot access the story I just bought Adobe story, but when I press sign there appears a ST logo with a spinning @bar that has been on my screen for hours

  I just bought Adobe story, but when I press on connect it appears a ST logo with a spinning @bar that has been on my screen for hours

  Can you please try the following?

  -first of all, make sure that you have flash player update. You can get the latest version of https://get.adobe.com/flashplayer

  Now open a session in anticipation of history for some time see if it solves your problem or not

  -If it don't then try opening your browser's private browsing/incognito mode and try connecting to the story from there

  If you are able to connect then you should try clear the cache and cookies of your browser

• Vista goes to 50% CPU usage and connects the computer for hours after the beginning

  Original title: Vista processor

  Stupid Vista goes to 50% CPU usage and connects the computer for hours after the start.  Cannot run anything with any request of CPU without getting bogged down and crashing.  It is not windows defender, I suspend this service and the machine is ok for another 1/2 hour, them I'm up to 50% of the CPU.  The idle process said Task Manager is > 90%, still indicates 50% CPU usage and the cooling fan looks like a 747 taking off.  Should I just pull the machine and go for Linux, or what?  Cannot run games or whatever it is, totally disgusted with vista of POS and microsoft can it Deep and do not get windows 7, it is probably worse.  Is that all I can turn off to get the same performance than, say, windows 3.1?  It would be preferable to the current situation.  MSCKMA.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• My account has been blocked for at least 3 weeks now. What the hell is happening?

  My account has been blocked for at least 3 weeks now. What the hell is happening? After reading all of these posts, it seems that MSN is simply stealing peoples email accounts, and we will never get our private information called back. What is the reason behind this? And why you are taking personal information from people who trusted in MSN for the use of electronic mail? Your customer service is the worse since you offer no support "on-line".

  It is quite the leap in logic.

  You have created a free account and ikely changed the password once or twice over the years you and the password was probably less than 15 characters and did not contain 3 of the four following things: uppercase, lowercase, symbols and numbers.  You can, or maybe not configuration options available for recovery of password as well.

  You think Microsoft is steaing accounts people - for what purpose.  They could probably allow you more easily just keep the accounts and steal your information (which you would hold current through new emails and others) which means it would be more useful for them just let you continue using the free account for stuff probably shouldn't you use a free account for that to take the entire account access on your part and lose this constant influx of new data on * you *.  If you have a logical argument for your accusation, "MSN flies simply email accounts of peoples", I'd love to hear it.

  Just in case where it happens, I could not care mail/Hotmail/Windows Live email, MSN etc.  It would not change the thoughts (see above), Yahoo Mail or another free service accused you of ' steaing your e-mail account "."  It is a free account and if you chose to use as your primary means of communication (knowing you probably receive your provider of Internet services and possibly your work email and could probably get an account to 'pay' for a little money * per year * that woud provide you with a way to recover your account, which could actually be traced back to you.)  As a free account, once someone hacks into what they can change the methods to reset the password so he sends their alternate accounts he their secret answers, it even look like their profile - delete all emails that could lead to a person thinking that it was not their account.  Yes - maybe (* maybe *) someone might come back in a little history (if such a thing exists) and to see that the answers have been changed and revisit the old emails – but it also means that Microsoft maintains backups and others on the free email service they follow hundreds of thousands (millions?) of people.  ;-)

  Anyway - as it was more of a rant (on our two parts, it seems to me) that a real application: there are a few things that I can offer you.

  (1) it is a peer-to-peer forum.  This means that those who respond here are likely than users of the same products that you happen to use and volunteer their time to help others because, just maybe, they have a little more "snap" when it comes to some of what the user lambda or maybe just because they like to help others.

  (2) first, not knowing what you have and that you have not tried, I suggest you read this article and make sure that you have gone through the normal steps to try to recover your lost free email account...
  http://www.itechwhiz.com/2011/04/account-recovery-reset-Windows-Live.html

  (3) in addition, I'm sure someone willpost back on the fact that * this * is not the right place to post on these issues.  This has nothing to do with Windows XP or repair the system and recovery.  You might be running Linux and are still using MSN mail. ;-)  Then...

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/
  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope you can get the necessary assistance.  I am obliged to tell you that if you are recovering your account - any email service set you on (and even if you pay for it) you should change your password regularly (usually once a year favorite) and make sure that it is a great password (I suggest 15 + characters, and containing 3 4 things I already mentioned) and that configure you each recovery password given to you by option the said account.  Also, if it's something important and not just an email to "undesirable" for the most part - consider paying somehting for this type of e-mail address.  Have a way of tracing the account to you (money trail) is a sure way to recover an account.

• Adobe story online is not loading. I just get the loading bar going on for hours. I restarted my browser, deleted my cookies, installed the latest version of Flash and still no loading.

  Adobe story online is not loading. I just get the loading bar going on for hours. I restarted my browser, deleted my cookies, installed the latest version of Flash and still no loading.

  For security reasons, browsers tend to block flash on a site content if the system does not have the latest version of flash player.

  Try to get the last being here: https://get.adobe.com/flashplayer

• When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours

  When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours

  What happens if you try to synchronize not this first song and next song?

  What is listed n the block status of iTunes when it freezes?