JavaScrip point sum and control set out to two decimal point.

Similar Questions

• Tabs does not. Do not remove the messages. Tried to reinstall AND reset (set only for two days).

  Something hinky (and no, it is not a virus).

  Following an 'Upgrade' of v40, I started to experience problems.

  When I open Thunderbird, it shows my home, not my Inbox tab. If I select my Inbox, the window does not change. By clicking on the "Read Messages" link does nothing. The only way to view my Inbox is right-click on it and choose to display it in a new tab. Then I have to manually switch to this tab.

  Once there, if I select a message and click on delete, the message is * copy * not moved to trash (the message remains open on the screen, while the Trash count rises by 1.) However, if I close Thunderbird, the "deleted" message no longer appears in my Inbox.

  By clicking on the buttons "Write" and "Address book" has no effect. By clicking on 'Options' in the menu 'Tools' doesn't do anything, but clicking on 'Account settings' works very well.

  Reinstall does not help. The data files are likely be corrupted because delete and recreate them solves the problem... but only for a few days. Then I'm right back where I started.

  I have NO add-on (at least, I have not before all the trouble started. I can't confirm now because the ' Add on ' link no longer works) and my PC is virus-free. Thunderbird is the only program behaving oddly.

  I even tried * degradation * Thunderbird to v38.2, but it did not help.

  Any ideas how to solve this problem? THX.

  Quick follow-up.

  It seems that the beta version of v40 corrupt my mail files. After that goes back to v38.2 and recreate my accounts from scratch, the problem has not returned.

• I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  I have an oval window on my desktop (Mac), which sets out everything I do and he's also very strong! Malware? Adware?

  If it looks like something like this, you have probably enabled VoiceOver.

  

• Installation Cloud Control agent 12 c on other blades thru RPM file and answer sets name of the bad cluster

  Hello

  I hope someone can help me with this. We have installed Cloud control 12 c em and its agents on various machines.

  First, we conducted with the target part two nodes of a network Infra cluster (let's call it proclu_1). Operating system is RH6.

  Then, using the same method (1 / y yum install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm then)

  2 / /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we have installed the agent on the other 2

  blades that are part of another cluster (proclu_2). The agent.properties file that precedes contained only the usual key-value lines:

  OMS_HOST = omsmachine.stuff.be

  OMS_PORT = 4889

  AGENT_REGISTRATION_PASSWORD = ametemp

  AGENT_USERNAME = oracle

  AGENT_GROUP = oinstall

  AGENT_PORT = 3873

  ORACLE_HOSTNAME = promachine.stuff.be

  Now, if I change to the/usr/lib/oracle/agent dir and search for the name "proclu *" from there, I found the name of the

  First install (on the first cluster of proclu_1):

  [oracle@bladb0406 officer] $ pwd

  / usr/lib/Oracle

  [oracle@bladb0406 oracle] $ find. -name "proclu_1."

  ./agent/agent_inst/SYSMAN/EMD/State/has/proclu2/cluster/proclu

  ./agent/agent_inst/SYSMAN/EMD/State/configstate/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/EMD/State/statemgmt/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/log/targets/cluster/proclu_1

  My questions:

  1 / the first two nodes (blada0204 & blada0406) in our first group this 'find' send him back

  same directory names with "proclu_1", this is what we expected: where to look for the agt oracle script

  our cluster name?

  2 / why he put the name of 'proclu_1' even - and evil - on our other two nodes (bladb0204 & bladb0406)?

  (us have expected 'proclu_2'...)

  Is there a way to fix this, or should I reinstall the agent (after you set/change something somewhere

  While it contains the name of the correct cluster...) ??

  Thank you very much.

  Kind regards

  SEB

  Unfortunately, this goes back to the RAC install procedures.   Check the name of the cluster for each cluster.   If they are all the same, installed, then you will need to manually discover/change name when you promote so that your clusters are unique in EM.

  To verify the name together for clusterware installation:

  / bin/cemutlo n

• How can I integrate a form on my site and to set up a button "submit" for when people fill out and click Submit, the form will be sent to me in the form of attached pdf file?

  How can I integrate a form on my site and to set up a button "submit" for when people fill out and click Submit, the form will be sent to me in the form of attached pdf file?

  Thank you!

  Salvation;

  This isn't a workflow that is supported by solutions of Adobe forms at this time.

  Thank you

  Josh

• On a 3.0.3 HYPERIC SERVER will attempt to set up an alert for hq agent and controlling -?

  On a 3.0.3 HYPERIC SERVER Im trying to put in place an alert for hq agent and controls the action to restart if I get an alert -?
  I open the page web hyperic and select the hyperic Server customer. I then click on alert
  and create an alert if the availability of the agent hq changes.  When I try and change the CONTROL ACTION with the help of change. It does not list the agent in the resource type.
  So I can not change the name of resource either, so I can't enter restart since I can get the hyperic
  customer as long as the resource. Thi snot is available. What I am doing wrong. I try to test the control
  action in EE and create just a simple test to restart the clien...

  Well, you can NAVIGATE to the AGENT to AC and control A QUESTION
  command?

  If you cannot issue a regular command via the command tab, then you
  won't be able to run a control to an alert action
  definition.

  In this case, the agent does not control, is not
  something you can do.  As I said, you can try the program control
  orders to different resources (other than the agent)

  -Jon

  On 2 May 2007, at 16:08, mike monczynski says:

  > I do not understand, can't, I have a client command to shutdown or reboot with the
  > The alert CONTROL.
  > Control has start stop restart but I can't get the hyperic
  > customer as the resource. I'm using the EA version.  I know that I can
  > maually shut down and boot a client. isn't this control will do the
  > same thing? Since he in the hyperic customer alert?  I have on
  > ocassion corrected problem by restarting the hyperic customer.
  >

• PS Edit CS6 controls grayed out for copy / cut items and diapers?

  Why my editing commands (copy and cut) dimmed out / unavailable? When you try to copy a selected layer or an object, all my editing commands are grayed out and unavailable. No idea why. Even if I have something to convert it to a smart object, no joy. The only thing I seem to be able to select and copy/cut/paste is the text in the text editing mode. makes no sense and is rendered unusable PS. How can I fix it?

  Thank you.

  Yes, it worked. I thought that by selecting the object itself was sufficient. Thanks for the help!

• Capabilities with the right Protection and control of license

  Hi people,

  Just check that I understand the limits of a capabilities of clients with the power of fire with only the Protection/control.

  They will be

  1 / receive updates of poorly known ip addresses

  2 / receive updates for pre-treatment Snort rules - VDB files

  3 / be able to create manual URLS to perform a kind of Url rules in function

  4 / geolocation?

  They will not

  1 / have any possibility to send / receive file layout information

  2 / have any possibility to use Url categories

  3 / are free to set up rules to file based Malware

  Hi Evan,

  With a minimum of Protection and control, you can start the management of firepower. If the customer requires awareness of users according to a user with the license agent host Firesight will do as well as the Protection and control. You can create reports user based with the latter.

  Here's the URL and ports must be opened for the Firesight get necessary updates.

  SRU/VDB/Patch/all updates
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Here is the detailed information of the download server:

  Domain: support.sourcefire.com
  URL: https://support.sourcefire.com
  Port: 443/tcp (bidirectional)
  IP address: 50.19.123.95, 50.16.210.129

  Additional IP addresses that are also used by the support.sourcefire.com (in the method of Robin) are:

  54.221.210.248
  54.221.211.1
  54.221.212.60
  54.221.212.170
  54.221.212.241
  54.221.213.96
  54.221.213.209
  54.221.214.25
  54.221.214.81

  For amp
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...
  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/sourcefire-amp-applia...
  Using port 443 (bidirectional)
  Or Legacy port 32137 (out)

  For the URL filtering
  Access to the 'database.brightcloud.com' and 'service2.brightcloud.com '.
  the IP address is dynamic
  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  For downloads of feed security intelligence:
  Access to intelligence.sourcefire.com
  The server uses the round robin scheme of IP address for the NLB, availability and fault tolerance. Therefore, IP addresses can change, and it is recommended that the firewall is configured with CNAME instead of an IP address.

  Ref 1 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Ref 2 > http://www.cisco.com/c/en/us/support/docs/security/firesight-management-...

  Using port 443 (bidirectional)
  Using port 80 (incoming)

  Kindly correct brand and rate if this helps.

  Concerning

  Jetsy

• I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  I have the time to default iPhone 4 iOS 7.1.2 iPhone App not updated since the last 3 days and also checked all the settings for location and also set as new iPhone always present problem... Please try to fix... Thanx

  Turn off your device and turn it on again. If this does not help, sign out of your account and reconnect.

  In addition, you can try to reset your settings.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

• My front/back buttons do not work - have done so "reset bars, tools and controls", but they don't always work

  When I downloaded the latest version, I got a new screen with the orange Firefox tab at the top. Which was very good, I found what I wanted, but the previous/next buttons didn't work. I checked the help section and went through suggestions to "toolbars and controls to reset" - this reset and I lost the orange box - which is not serious, but the previous/next buttons still do not work.

  Do you have more than one tab open? If you don't go to a different site in one tab, then Yes, the buttons will be grayed out. If you went somewhere in another tab, then these sites should be accessible by clicking on buttons.

• Can I install video driver AMD and Control Panel on HP ProBook 4540 s?

  Hello

  I want to install driver video AMD and control panel alongside Intel video driverand Control Panel.

  Here's my computer laptop Information System:

  Name of the Microsoft Windows 8.1 operating system company

  Version 6.3.9600 Build 9600

  Another Description of the OS is not available

  Manufacturer of operating system Microsoft Corporation

  ROGUE system name

  System manufacturer Hewlett-Packard

  HP ProBook s 4540 model system

  System Type x 64-based PC

  SKU C1B74PA #UUF system

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  BIOS Version/Date Hewlett-Packard 68IRR worm. F.50, 04/08/2014

  SMBIOS Version 2.7

  Embedded Controller Version 88.33

  BIOS Legacy Mode

  Baseboard manufacturer Hewlett-Packard

  Model baseboard is not available

  Name of plinth base

  Role Mobile platform

  State of secure boot not supported

  PCR7 Configuration binding is not Possible

  Windows directory C:\Windows

  System directory C:\Windows\system32

  Boot Device \Device\HarddiskVolume1

  The local United States

  Hardware Abstraction Layer Version = "6.3.9600.17196".

  User name TuHiN\T u H i N

  Bangladesh time zone standard time

  Physical memory (RAM) installed 4.00 GB

  3.88 GB total physical memory

  Available physical memory 1.95 GB

  7.88 GB total virtual memory

  5.59 GB available virtual memory

  Page file space 4.00 GB

  Paging file C:\pagefile.sys

  Hyper-V - VM monitor Mode Extensions Yes

  Hyper-V - second level address translation Extensions Yes

  Hyper-V - virtualization enabled in Firmware No.

  Hyper-V - data execution Protection Yes

  Hello:

  From what I can find on the product number you posted, it only comes with the integrated graphics Intel HD 4000 which means that you can not install the AMD software because it won't do a thing.

  That only works for laptops with AMD/Intel switchable graphics.

  HP Probook s 4540 C1B74PA Core i5 - 3210M Ram 4 GB HDD 750 GB 15.6 inch

  * ProcesseurIntel Core i5 - 3210M (2.50 Ghz, 3 MB L3 Cache)
  * RAM 4 GB DDR3 BUSS 1333 Mhz
  * 750 GB HARD drive -5400 RPM (SATA)
  * Display 15.6 "LED
  * Graphics Graphics Intel HD 4000
  * Wireless 802.11 b/g/n
  * External ports3.0/VGA/HDMI/RJ-45/ Headphone Out/Lan10/100/1000/bluetooth usb...
  * Pin 6-cell
  * Camera 1.3Mpx
  * Weight 2.5 Kg
  * OPERATING SYSTEM PC BACK

• My volume icon and control is missing

  My volume icon and control is missing and I also think that the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to make it work better and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading other posts, that it is said to right click on Start/Properties/Notification...but, I don't have the option "notification" under properties.  What should I do?

  My volume icon and control is missing and I think also the program is now defunct.  A spokesman for AOL of sees has accessed our computer to 'clean up' to run the best and I think that he has removed my volume and its program.  When I tried to add the volume on my computer icon, he told me I do not have the program and install it.  When I went to add the program by following the instructions, it took me to Microsoft, but there is no program called "volume and noise."  In reading the other messages he said right-click on Start/Properties/Notification... .but I don't have the option "notification" under properties.  What should I do?

  Hello

  Notification options are only available for Windows Vista and higher. The Control of the Volume icon may appear from the Control Panel.

  You said that the Spokesman of AOL could have removed the Control of Volume, please make sure that the following files exist on your system to see if the Setting of the Volume has been either deleted or not
  %SystemRoot%\system32\sndvol32.exe
  
  
  If you do not want to enable the display of the Control of the Volume icon, please try the following
  [1] method: Using the control panel to change the settings for sounds and Audio devices
  • On the start menu, select Control Panel.
  • Double-click sounds and Audio devices.
  • On the general tab, check Place volume icon in the taskbar
  • Click OK

  Thank you
  Have a nice day :)

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Req to send my audio drivers and Control Panel

  Hello, my audio drivers and control panel have been lost due to the attack of Trojan horses. I am unable to choose my required drivers and Control Panel, as an error report occurs and is closing is the open window.so you, please please send me the suitable audio drivers and control computer panel.my laptop presario c555nr model.please send them as soon as posible.

  http://h20180.www2.HP.com/apps/lookup?h_lang=en&h_cc=us&cc=us&h_page=hpcom&lang=en&h_client=S-A-R163-1&h_pagetype=s-002&h_query=c555n&submit=go+%BB

  These are yours?

  Alternatively, you can try to restore your computer to a point before the attack of Trojan with the Microsoft System Restore.

  Go start > all programs > Accessories > system tool > system restore.

  If the Trojan damaged your system to the point where you can't fix it, you may need to reload your OS using your HP Recovery Manager. Save all of your personal information. prior to this, as it will be deleted.