Router cannot ping off the grid

Similar Questions

• Want 7640: HP Envy 7640 dropped off the grid and cannot reconnect

  Envy 7640 dropped off the grid and cannot reconnect. I followed the instructions on the previous thread without result - restoring network, cycling settings, router, modem, etc... printer indicates "failure" for the "no filtering". All other wireless devices work fine. Please notify

  Please provide the following information if anyone can help including:

  The printer model - done

  Operating system on the computer (including service pack revision) - done

  Detailed - description of problem including all devices network (extensor, switches)

  Connection method - Direct wireless, wireless, wired LAN, USB? -

  Number of brand and model of router and modem? -

  Error messages - on the screen of the printer or computer, no matter what flashing light patterns? -

  Do you think the printer is going to sleep and can't wake up? -

  If wireless, in the event of problem, what is the status of the blue wireless light on the printer, active, disabled or flashing? –

  Power off the printer and the router.  Power on the router and wait 3 minutes, power on the printer.  It connects to the router now?  What is the IP address of printers?

• ASA 5540 - cannot ping inside the interface

  Hi all. We have recently upgraded PIX to ASA5540 and we saw a strange thing going. In a Word, we can ping the inside interface of the ASA from any beach on our 6500 network (which is connected directly behind the ASA on the inside), but one where our monitoring tools are placed. Inside there is an ACL that allows all of our core networks, but it does not help that the interface is really strange.

  In the ASDM, I see messages like this:

  ID ICMP echo request: 2004 x.x.x.x y.y.y.y on the inside interface to. I don't think that's the problem, but I could be wrong.

  This is also the configuration of the interface VLAN VIRTUAL local area network from which we cannot ping inside the interface we can ping to and since this VLAN and machines without problem. The only problem is ping the inside interface of the ASA.

  interface Vlanx

  IP x.x.x.x 255.255.255.0

  IP broadcast directed to 199

  IP accounting output-packets

  IP pim sparse - dense mode

  route IP cache flow

  load-interval 30

  Has anyone experiences the problem like this before? Thanks in advance for any help.

  Can you post the output of the following on the ASA:-

  display the route

  And the output of your base layer diverter: -.

  show ip route<>

  HTH >

• Help, please! I plugged a new plan "creative cloud membership (one year)", but cannot turn off the "Plan of creative photography of Cloud (one year).

  Help, please! I plugged a new plan "creative cloud membership (one year)", but cannot turn off the "Plan of creative photography of Cloud (one year). What to do?

  Hello

  You can try the steps on the following link to cancel, cancel your membership Adobe Creative Cloud

  If it does not you or if you get an error contact Adobe to contact customer service

• well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  well... try #3... I spend 80% of my life offline... off the grid, as I live in a remote area, the power produced by wind and water. CS5 or 6 is still available? I also hate the Basic applications to... any help here?

  We're just facing some misinformation: creative cloud, CC of Photoshop, Photoshop CC2014 are NO CLOUD. Yes, it is a name quite stupid, because.

  They install and run locally exactly like previous versions. They are different in three ways:

  1. simple integration of cloud services from Adobe to keep the files, which you can ignore.

  2 subscription only.

  3. you will need to regularly connect to the internet to verify your subscription status. Not sure it can be monthly. This could still be unsuitable for you of course.

• Cannot ping via the VPN client host when static NAT translations are used

  Hello, I have a SRI 3825 configured for Cisco VPN client access.

  There are also several hosts on the internal network of the static NAT translations have a services facing outwards.

  Everything works as expected with the exception that I cannot ping hosts on the internal network once connected via VPN client that is internal IP addresses have the static NAT translations in external public addresses, I ping any host that does not have static NAT translation.

  For example, in the example below, I cannot ping 192.168.1.1 and 192.168.1.2, but I can ping to the internal interface of the router, and any other host on the LAN, I can ping all hosts in the router itself.

  Any help would be appreciated.

  Concerning

  !

  session of crypto consignment

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpnclient

  key S3Cu4Ke!

  DNS 192.168.1.1 192.168.1.2

  domain domain.com

  pool dhcppool

  ACL 198

  Save-password

  PFS

  netmask 255.255.255.0

  !

  !

  Crypto ipsec transform-set-SECURE 3DES esp-3des esp-sha-hmac

  !

  Crypto-map dynamic dynmap 10

  86400 seconds, life of security association set

  game of transformation-3DES-SECURE

  market arriere-route

  !

  card crypto client cryptomap of authentication list drauthen

  card crypto isakmp authorization list drauthor cryptomap

  client configuration address card crypto cryptomap answer

  map cryptomap 65535-isakmp ipsec crypto dynamic dynmap

  !

  interface GigabitEthernet0/0

  NAT outside IP

  IP 1.2.3.4 255.255.255.240

  cryptomap card crypto

  !

  interface GigabitEthernet0/1

  IP 192.168.1.254 255.255.255.0

  IP nat inside

  !

  IP local pool dhcppool 192.168.2.50 192.168.2.100

  !

  Note access-list 198 * Split Tunnel encrypted traffic *.
  access-list 198 allow ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255

  !
  Note access-list 199 * NAT0 ACL *.
  access-list 199 deny ip 192.168.0.0 0.0.255.255 192.168.0.0 0.0.255.255
  access-list 199 permit ip 192.168.1.0 0.0.0.255 any

  !

  Sheep allowed 10 route map
  corresponds to the IP 199

  !
  IP nat inside source map route sheep interface GigabitEthernet0/0 overload

  !

  IP nat inside source static 192.168.1.1 1.2.3.5
  IP nat inside source static 192.168.1.2 1.2.3.6

  The problem seems to be that static NAT take your nat exemption.

  The solution would be:

  IP nat inside source static 192.168.1.1 1.2.3.5 sheep map route
  IP nat inside source static 192.168.1.2 1.2.3.6 sheep map route

  HTH

  Herbert

• Cannot ping across the firewall

  I'll put up the asa in GNS3 lab, but I can't do a ping through the firewall to the inside of the interface for the external interface. Here's my running-config... I don't know that miss me some I don't know what. If anyone can find out what it is, that would be nice.

  See the race
  : Saved
  :
  ASA Version 8.4 (2)
  !
  ciscoasa hostname
  activate 8Ry2YjIyt7RRXU24 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface GigabitEthernet0
  nameif inside
  security-level 100
  the IP 10.0.0.2 255.255.255.0
  !
  interface GigabitEthernet1
  nameif outside
  security-level 0
  4.2.2.2 IP address 255.255.255.0
  !
  interface GigabitEthernet2
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  passive FTP mode
  pager lines 24
  Enable logging
  timestamp of the record
  logging buffered information
  logging trap information
  Within 1500 MTU
  Outside 1500 MTU
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Route outside 0.0.0.0 0.0.0.0 10.0.1.2 1
  Route inside 172.16.0.0 255.255.254.0 10.0.0.1 1
  outdoor 172.16.2.0 255.255.254.0 10.0.1.2 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  identity of the user by default-domain LOCAL
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  Review the ip options
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the icmp
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  call-home
  Profile of CiscoTAC-1
  no active account
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group monthly periodic inventory
  monthly periodicals to subscribe to alert-group configuration
  daily periodic subscribe to alert-group telemetry
  crashinfo record disable
  Cryptochecksum:d6838a5cc1c3620ba830e7d745eaf9a1
  : end

  After having thought about it twice, it's clear. I wrote to change because it is a good practice, but with the ASA on the other side, it is necessary.

  If you use the output as the destination of a route interface, the router must be able to arp for the IP of destination (for each that is used) L2 address of next hop. The other side (the ASA in your scenario) must have a proxy-arp enabled for this because demand is not a configured address.

  If you configure an IP address as the next hop, the router must only address L2 a jump next-address IP used in the static route.

• Remote access VPN client to connect but cannot ping inside the host, after that split tunnel is activated (config-joint)

  Hello

  I don't know what could be held, vpn users can ping to the outside and inside of the Cisco ASA interface but can not connect to servers or servers within the LAN ping.

  is hell config please kindly and I would like to know what might happen.

  hostname horse

  domain evergreen.com

  activate 2KFQnbNIdI.2KYOU encrypted password

  2KFQnbNIdI.2KYOU encrypted passwd

  names of

  ins-guard

  !

  interface GigabitEthernet0/0

  LAN description

  nameif inside

  security-level 100

  192.168.200.1 IP address 255.255.255.0

  !

  interface GigabitEthernet0/1

  Description CONNECTION_TO_FREEMAN

  nameif outside

  security-level 0

  IP 196.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/2

  Description CONNECTION_TO_TIGHTMAN

  nameif backup

  security-level 0

  IP 197.1.1.1 255.255.255.248

  !

  interface GigabitEthernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  Shutdown

  No nameif

  no level of security

  no ip address

  management only

  !

  boot system Disk0: / asa844-1 - k8.bin

  boot system Disk0: / asa707 - k8.bin

  passive FTP mode

  clock timezone WAT 1

  DNS server-group DefaultDNS

  domain green.com

  network of the NETWORK_OBJ_192.168.2.0_25 object

  Subnet 192.168.2.0 255.255.255.128

  network of the NETWORK_OBJ_192.168.202.0_24 object

  192.168.202.0 subnet 255.255.255.0

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  the DM_INLINE_NETWORK_2 object-group network

  object-network 192.168.200.0 255.255.255.0

  object-network 192.168.202.0 255.255.255.0

  access-list extended INSIDE_OUT allow ip 192.168.202.0 255.255.255.0 any

  access-list extended INSIDE_OUT allow ip 192.168.200.0 255.255.255.0 any

  Access extensive list permits all ip a OUTSIDE_IN

  gbnlvpntunnel_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnel_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  gbnlvpntunnell_splitTunnelAcl standard access list allow 192.168.200.0 255.255.255.0

  standard access list gbnlvpntunnell_splitTunnelAcl allow 192.168.202.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  backup of MTU 1500

  mask of local pool VPNPOOL 192.168.2.0 - 192.168.2.100 IP 255.255.255.0

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm-645 - 206.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.202.0_24 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  NAT (inside, backup) static source DM_INLINE_NETWORK_2 DM_INLINE_NETWORK_2 NETWORK_OBJ_192.168.2.0_25 NETWORK_OBJ_192.168.2.0_25 non-proxy-arp-search of route static destination

  !

  network obj_any object

  dynamic NAT interface (inside, backup)

  Access-group interface inside INSIDE_OUT

  Access-group OUTSIDE_IN in interface outside

  Route outside 0.0.0.0 0.0.0.0 196.1.1.2 1 track 10

  Route outside 0.0.0.0 0.0.0.0 197.1.1.2 254

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.200.0 255.255.255.0 inside

  http 192.168.202.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  monitor SLA 100

  type echo protocol ipIcmpEcho 212.58.244.71 interface outside

  Timeout 3000

  frequency 5

  monitor als 100 calendar life never start-time now

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  backup_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  backup of crypto backup_map interface card

  Crypto ikev1 allow outside

  Crypto ikev1 enable backup

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  !

  track 10 rtr 100 accessibility

  Telnet 192.168.200.0 255.255.255.0 inside

  Telnet 192.168.202.0 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.202.0 255.255.255.0 inside

  SSH 192.168.200.0 255.255.255.0 inside

  SSH 0.0.0.0 0.0.0.0 outdoors

  SSH timeout 15

  SSH group dh-Group1-sha1 key exchange

  Console timeout 0

  management-access inside

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal group vpntunnel strategy

  Group vpntunnel policy attributes

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list vpntunnel_splitTunnelAcl

  field default value green.com

  internal vpntunnell group policy

  attributes of the strategy of group vpntunnell

  Ikev1 VPN-tunnel-Protocol

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list gbnlvpntunnell_splitTunnelAcl

  field default value green.com

  Green user name encrypted BoEFKkDtbnX5Uy1Q privilege 15 password

  attributes of user name THE

  VPN-group-policy gbnlvpn

  tunnel-group vpntunnel type remote access

  tunnel-group vpntunnel General attributes

  address VPNPOOL pool

  strategy-group-by default vpntunnel

  tunnel-group vpntunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  type tunnel-group vpntunnell remote access

  tunnel-group vpntunnell General-attributes

  address VPNPOOL2 pool

  Group Policy - by default-vpntunnell

  vpntunnell group of tunnel ipsec-attributes

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns migrated_dns_map_1

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the migrated_dns_map_1 dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  call-home

  Profile of CiscoTAC-1

  no active account

  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address

  email address of destination [email protected] / * /

  destination-mode http transport

  Subscribe to alert-group diagnosis

  Subscribe to alert-group environment

  Subscribe to alert-group monthly periodic inventory

  monthly periodicals to subscribe to alert-group configuration

  daily periodic subscribe to alert-group telemetry

  Cryptochecksum:7c1b1373bf2e2c56289b51b8dccaa565

  Hello

  1 - Please run these commands:

  "crypto isakmp nat-traversal 30.

  "crypto than dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 Road opposite value.

  The main issue here is that you have two roads floating and outside it has a better than backup metric, that's why I added the command 'reverse-road '.

  Please let me know.

  Thank you.

• Cannot turn off the location Services on the new iPhone

  For some reason, there is no way to disable the location Services on new iPhone 6 s daughter. We have switched/updated sound from an old iPhone 5, but were sure disable settings find my phone/Find My Friends. In addition, iPhone 5 has been wiped clean. However, location Services are unable to be activated off the coast on the new iPhone... the toggle switch is "grayed out". Even in circles iCloud, even in the General settings.

  The idea was to find it on my friends for the new phone, but this is not possible, since it states that this service is managed by the iPhone 5... is no longer active. No matter what I try (reboot, reset location/privacy settings, turn off all network connections), I am unable to adapt localization Services (On / Off) and subsequently, the share location parameter.

  3 other phones that we have obtained (6s as well) do not present the issues and working properly, including the activation of location Services button.

  Hi, pairof9s.

  Please visit Apple support communities.

  I understand that you can't change the setting of location Services on iPhone again your daughter 6 s.  It looks like may have restored the old iPhone backup and restrictions are activate that prevent changes to certain characteristics.  You can check by going to settings > general > Restrictions and see if they are enabled.  You can then temporarily disable restrictions you can change this setting.  Take a look at the article below for more information.

  On Restrictions (parental control) on your iPhone, iPad and iPod touch

  In regards not being not able to find my friends, you need to maybe just remove the iPhone 5 find it my iPhone via iCloud.com service.  Take a look at the article below for instructions on how to remove the device.

  iCloud: remove your device, Find My iPhone

  See you soon

• X 230-cannot turn off the Adaptive function contrast or backlight?

  X 230, have tunred off the coast of the brightness and adaptive contrast in Intel and power settings, but the screen becomes even darker on the dark pages and then lit upward on whites.

  All the hidden settings should I Explorer?

  
  

• Cannot turn off the issue of jam and paper cartridge (both at the same time)

  I have a HP Officejet 8600, running on a wireless home network.  The printer will not work.  We get two messages. 1. Introduction to jam, and I'm going through all the steps to clear paper, including the search for pieces of paper, as well as any leaves.  I found no paper, whole or in part anywhere in the printer.  2. at this point, I get a message that I have a problem with a printer (of ink, installed correctly, etc.) cartridge.  Simply replace us all cartridges, so I know that we are not out of ink.  However, when I opened the door to the area of printer cartridge, the cartridge does not move where I can check it out.  There's just right.  So I'm "stuck".  I don't know how to get the cartridge door to roll over so I can check!  I turned off the computer several times and tried to reset things, but nothing seems to work.  Any suggestions?

  Followed - I turned off the printer.  Then opened the cartridge and reaches into the printer access door.  Without moving the cartridge door, I pressed each cartridge to make sure it was placed correctly.  Then, shut the door and back running the printer.  The printer seems to start correctly.  I then opened the door, the door-cartridge moved where I could access them normally.  I double checked that each cartridge is installed and closed the door.

  At this point, everything seems to work properly.

• Cannot turn off the LEDS on Cisco Aironet 1141

  I am trying to turn off the LED on a Cisco Aironet 1141 p/n AIR-AP1141N-A-K9.  It is a standalone AP and the CLI I publish this command:

  turn off the display of #led AP (config)

  The light does not go out after you type this command.  If I "run" it appears in the config so that the order has been accepted.  Is there another way to turn off the LED?  I'm under JA1 IOS Version 12.4 (21a).

  If you have the AP 1141 under warranty, you can send an email to [email protected] / * / PA serial number and they can post you the picture ask you.

  You want to say "Thank you"?
  Ne. Just note the useful responses,
  It is more useful than 'thank you'.

• Cannot ping inside the ASA from the inside interface

  Don't know what I did wrong... appreciate any help

  Here is the page layout

  laptop--> cisco 3750 switch--> ASA5505 firewall--> future VPN tunnel

  Laptop, switch interface VLAN and inside the ASA are all in the same subnet

  Switch and ASA have all interfaces local network VIRTUAL 52 (the subnet in question), except for the external interface

  -----------------

  This is the problem

  laptop getting ip addressing and def GW via DHCP from the firewall

  switch and FW can ping each other without problem

  FW can't ping, still gets the DHCP scope.

  Thank you

  Dave

  Hello

  How did you setup?

  The laptop is connected to a port of the 3750 (VLAN 52).

  The connection between the 3750 and the SAA is a chest or a link L3?

  If the 3750 has a SVI belonging to VLAN52, you can ping from the correct PC? As well as the ASA?

  Federico.

• Turn off the grid

  Is there a way to disable the grid on Photoshop elements 14? It's wasting my art projects. Thank you.

  Since you have the unchecked, try to go to view > snap to > guides. I hope that helps!

• Cannot turn off the keyboard

  After pressing the power button on my PalmZ22 and the disabled keyboard appears and I type to disable the keyboard this screen disappears.  Tapping to turn off the screen to put my password does not work. I tried to reset my Palm with Soft and Hard Reset function, and always with let me not disable the keyboard.

  ecwmoore2106, please do not double - post.