ROWID question during the passage of the element with f? rating URL p

Similar Questions

• Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

  Hello

  first of all, thank you for providing tools such as vCenter Converter for free.

  I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

  The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

  Unexpected exception: converter.fault.FileCreationFault

  -ERROR - convert: converter.fault.FileCreationFault

  {(converter.fault.FileCreationFault)

  dynamicType = < unset >

  faultCause = (vmodl. NULL in MethodFault),

  file ="
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

  MSG = ""

  }

  There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

  from reconfiguring the system...

  using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

  ReconfigurationTransaction: cached reviews system volume

  LocalPathToGuestSystemFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

  LocalUndoFolder:
  .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

  Cannot create undo file

  Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

  TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: Task 3

  InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

  Creation of vmx file Analyzer

  BaseParserImpl::Parse Config info is not cached

  F:\VM\wartberg\wartberg.vmx analysis

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  NIC has no info support, unable to determine connectionType

  Registry hive
  . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
  Boot\BCD is responsible under the name mntApi397493888030118019

  Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

  MntApi397493888030118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

  2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

  Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi404763500730118019 hive unloaded

  MntApi398445489630118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

  MntApi406994304730118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

  2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

  2 error reading information SP

  CurrentType key is multiprocessor free

  2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

  2 error reading 64 bits of information, probably not a 64-bit system

  the product name is Windows 7 Home Premium

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

  Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

  Error 2 vmxnet information, assuming that vmxnet is not installed

  MntApi425417937030118019 hive unloaded

  MntApi419224726130118019 hive unloaded

  Registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

  MntApi427773541230118019 hive unloaded

  Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

  VMOUNT library: 1450 error communication error with the pilot while

  Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

  Error 16258 when you open the software hive

  Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

  MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

  OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

  BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

  WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

  bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

  http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

  WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

  http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

  WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

  Task failed:

  Scheduled timer cancelled, succeeds StopKeepAlive

  Completed task: task-1

  bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

  As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

  Any help is appreciated!

  Thank you

  nepper

  OK - I'll upload versions changed in maybe 15 minutes

  muss weg kurz

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Back to zero/recalculate value if the element with dynamic action

  Hi all
  
  What I have is a part of "total amount". When the other elements on the form are filled, these values are subtracted from the total. My problem is that when a few points to say a filled out, but then set to zero, the figure in the total does not reset. If no new figure added, are more excluded.
  
  For example:
  total = 10
  Value of 1 changed to 5. Total = 5.
  Value of item 2 changed to 1. Total = 4.
  Value of 1 changed to 2. Total = 2.
  
  I find it tricky is because the total is derived from an action of current setpoint led other points. Finally, I would like to reset or re - run the calculation for the total, without duplicating the original action of the set value. I tried to use a dynamic action "Refresh" but I don't think that work in this way. Is there another way?

  Why not save the original value to an item hidden page (or even in a global variable set before you run the JS calculation for the first time in javascript).
  During the reset, set the value of the element with the value of the hidden (or variable).

• 12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  12 elements Photoshop on my other Mac having recently had not smashed, new no CD player. How do we install the elements with my product key? Buying an external CD drive is not an option at the moment after the fork on the 2500 for the new Mac...

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.6| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Creating an element indicates the element with the name already exists

  Hello dear,
  
  I'm on R12
  
  We are to modernize a few standard Link elements that weren't before. So I end of all the links in the element and then end the element as 31-dec-2012.
  I am trying to use the same element of 1 January 2013 and set it as a standard binding element, but it is throwing an error indicating that the element with the name already exists
  who is reasonably.
  
  My requirement is that I wanted to use the same element name and set it as a standard link. I can do this.
  
  Your entries are highly appreciated.
  
  Thank you

  You can go the previous day, press Delete again, and select Remove next or all future changes

• How can I configure the element with the script names?

  Could Hello someone give me a hand?

  I created symbols on the stage of this script below.

  ------------------------------------------------------

  for (k = 0; k < 5; k ++) {}

  sym.createChildSymbol ("mySymB", "Stage");

  }

  ------------------------------------------------------

  How can I configure the element with the script names?

  Because, when I try to control a symbol by using the getSymbol("---") command.

  I need to know the name of the item given to each symbol.

  Concerning

  Yes, you're right.

  Using 'Code-Example' If you write sym.getSymbol ("mySymB") that edge returns the undefined value.

  With "Drag-and-drop-Example", you can use sym.getChildSymbols ().

• How can I get the value of the element with the namespace?

  I tried to get an element of value in xml a namespace, but I can't.
  I removed the namespace, I get a value of the element.
  
  How can I get a value of the element with the namespace?
  
  -1. Error ----------- xml ------------------------------
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  * < TaxInvoice xmlns = "" urn: kr: or: kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 "xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xsi: schemaLocation =" urn: kr: or: kec:standard:Tax:ReusableAggregateBusinessInformation:1:0 http://www.kec.or.kr/standard/Tax/TaxInvoiceSchemaModule_1.0.xsd "> *"
  < ExchangedDocument >
  < IssueDateTime > 20110810133213 < / IssueDateTime >
  < ReferencedDocument >
  < ID > 318701 - 0002 / < ID >
  < / ReferencedDocument >
  < / ExchangedDocument >
  < TaxInvoiceDocument >
  < IssueID > 201106294100 < / IssueID >
  < > 0101 TypeCode < / TypeCode >
  < IssueDateTime > 20110810 < / IssueDateTime >
  < PurposeCode > 02 < / PurposeCode >
  < / TaxInvoiceDocument >
  < TaxInvoiceTradeLineItem >
  < SequenceNumeric > 1 < / SequenceNumeric >
  < > 200000000 InvoiceAmount < / InvoiceAmount >
  < TotalTax >
  < CalculatedAmount > 20000000 < / CalculatedAmount >
  < / TotalTax >
  < / TaxInvoiceTradeLineItem >
  < / TaxInvoice >
  
  
  -2. success - xml - remove namespace.
  <? XML version = "1.0" encoding = "UTF-8"? >
  < TaxInvoice >
  < ExchangedDocument >
  < IssueDateTime > 20110810133213 < / IssueDateTime >
  < ReferencedDocument >
  < ID > 318701 - 0002 / < ID >
  < / ReferencedDocument >
  < / ExchangedDocument >
  < TaxInvoiceDocument >
  < IssueID > 201106294100 < / IssueID >
  < > 0101 TypeCode < / TypeCode >
  < IssueDateTime > 20110810 < / IssueDateTime >
  < PurposeCode > 02 < / PurposeCode >
  < / TaxInvoiceDocument >
  < TaxInvoiceTradeLineItem >
  < SequenceNumeric > 1 < / SequenceNumeric >
  < > 200000000 InvoiceAmount < / InvoiceAmount >
  < TotalTax >
  < CalculatedAmount > 20000000 < / CalculatedAmount >
  < / TotalTax >
  < / TaxInvoiceTradeLineItem >
  < / TaxInvoice >
  
  
  
  
  -program-
  procedure insert_table
  (
  l_clob clob,
  OK, Boolean.
  Error out varchar2
  )
  is
  l_parser dbms_xmlparser. Analyzer;
  xmlDoc xmldom.domdocument;
  
  l_doc dbms_xmldom. DOMDocument;
  l_nl dbms_xmldom. DOMNodeList;
  l_n dbms_xmldom. DOMNode;
  l_root DBMS_XMLDOM.domelement;
  l_node DBMS_XMLDOM.domnode;
  l_node2 DBMS_XMLDOM.domnode;
  l_text DBMS_XMLDOM. DOMTEXT;
  
  buf VARCHAR2 (30000);
  
  XMLParseError exception;
  
  TYPE tab_type is Table of xml_upload % ROWTYPE;
  t_tab tab_type: = tab_type();
  pragma exception_init (xmlparseerror,-20100);
  l_node_name varchar2 (300);
  
  Start
  l_parser: = dbms_xmlparser.newParser;
  l_doc: = DBMS_XMLDOM.newdomdocument;
  dbms_xmlparser.parseClob (l_parser, l_clob);
  l_doc: = dbms_xmlparser.getDocument (l_parser);
  l_n: = dbms_xmldom.makeNode (l_doc);
  
  l_nl: = dbms_xslprocessor.selectNodes (l_n, ' / TaxInvoice/TaxInvoiceDocument ');
  
  FOR cur_tax in 0.dbms_xmldom.getLength (l_nl) - 1 LOOP
  l_n: = dbms_xmldom.item (l_nl, cur_tax);
  
  t_tab.extend;
  
  t_tab (t_tab.last) .ed_id: = '5000000';
  
  dbms_xslprocessor.valueOf (l_n, ' IssueID / text () ', t_tab (t_tab.last) .tid_issue_id);
  dbms_xslprocessor.valueOf (l_n, ' TypeCode / text () ', t_tab (t_tab.last) .tid_type_code);
  
  END LOOP;
  
  FORALL i IN t_tab.first... t_tab. Last
  INSERT INTO xml_upload VALUES t_tab (i);
  
  COMMIT;
  
  dbms_xmldom.freeDocument (l_doc);
  correct: = true;
  
  exception
  When xmlparseerror then
  -xmlparser.freeparser (l_parser);
  correct: = false;
  error: = sqlerrm;
  
  end insert_table;

  l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');
  

  try to change as follows

  l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');
  

  Published by: Alexandr on August 17, 2011 12:36 AM

• Branch to the Page identified by the element with parameters

  A certain page we originally had a 'branch at or the Page URL' that has parameters associated with it (which one who reset the element on the page the branch goes back to the current value of the item page before branching him given that this necessary element to stay with the current value of population but was erased when he branched out) but now I have a new Application process that defines an element of the request for the page that should be branched to.
  
  Since Apex does not recognize the elements of the Application in a "branch of Page or URL", I need to create a "branch of Page identified by Item", the problem is that there is no "Set these elements" "with these values" with this type of branch or the option to include parameters in a URL target. I already tried to use the "branch Page or the URL" with the Application in the URL element, but that no longer works.
  
  Any suggestions on how I might branch to a page based on an element of the Application (if not this way, somehow creates a branch to a page based on a value in an application process) with the settings?
  
  What does not make sense to me, is that you could create a branch to a Page with a value of Page element with parameters defining the elements with certain values, but you can do this when identified by the item or it is not yet Application_Items in a Branch_to_Page/URL.
  
  Thank you in advance,
  -Brian

  Brian,

  Have you tried to use the Type of the branch "Branch to the Page identified by the (name of the use element) element" and put the name of your APP_ITEM like

  APP_ITEM

  ?

  This should work for you.

  Denes Kubicek
  ------------------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  ------------------------------------------------------------------------------

• Ask questions about the elements of access on Blackberry Webwork sample

  Hi all, sorry for such a newbie question, I would like to ask something about the elements of access after im read the sample application blackberry on blackberry html5 webwork site and im find access element script like below

  I would like to ask what is the meaning of this script? IM usually use the site name, and this is the first time that I have, see

  well thank you all answer :-)

  The * character is a wildcard character, which means that your application can access the resources of any URI, not just another specific.

• A few questions during the consideration of the unique and professional license

  Hi all

  I am creating e-brochures for funiture products. But I have some questions when I choose a simple license or professional.
  Can anyone can help and answer to sub questions. Thank you

  1. for a single license, this means that I can download only 1 .folio for the application? Given that I intend to create a monthly e-brochure, if I downloaded a problem for Nov, can I upload another question for Dec? Will be that the application displays two issues?

  2 purchase guides, says Professional license includes free 5000 (annual) or 250 (monthly) .folio with the first year of service. This means that I can only have 5000 questions in the application for a year? or I can download only 5000 TIMES (which means that if I update/overwrite there is a question, I downloaded 2/5000 times)

  3. can I change the name of the app if I bought the single license?

  4. can I download the same application on the android market with a single license?

  5. is at - it offers Adobe upgrade plan? which means that I can use only permits first, if I think it's not enough, I can go from the plan to the Professional license.

  I am very confused with the purchase of guideline comparison. My goal is to create a number monthly e-brochures. Any suggestion to choose the appropriate license? Thank you

  1. with the single license edition DPS, you can create built-single edition app. If you plan to create several Folio app, then you should go with DPS Professional edition.

  2. it means you get complimentry 5000 downloads in DPS annual Pro and 250 per month in the case of DPS Pro monthly. You can have unlimeted number of folios, and you can update your folio number n times. It only means that you get 5000 or 25o parmois downloads in your POS with DPS Professional edition.

  3. Yes, you can change the name of the application.

  4 Currenlty with DPS single edition, you cannot create built-single edition app. DPS Professional edition is required to create an application for Android market.

  5 no.

  According to you need, I suggest you go with DPS Professional edition.

• Good Questions during the interview of s/n

  What is the advantage of the RMAN utility?
  
  How RMAN improves backup times?
  
  Can you take offline with RMAN backups?
  
  How do you see information about the RMAN backups?
  
  What is a catalog of recovery?
  
  You need to place the Recovery Catalog in the same DB?
  
  You can use RMAN without a recovery catalog?
  
  You can take the picture with RMAN backups?
  
  You can use Backupsets created by RMAN with any other utility?
  
  How can you see how many segments of memory are acquired by the Oracle Instances?
  
  How can you see what segment belongs to which instances of database?
  
  This bottleneck you will find by VMSTAT and IOSTAT? What news column is useful?
  
  How do you define the parameters of the kernel in Red Hat Linux, AIX and Solaris?
  
  How to remove the chunks of memory?
  
  What is the difference between the symbolic link and hard link?
  
  What is stored in the oratab file?
  
  How can you see how many processes are running under Unix?
  
  How can you kill a process in Unix?
  
  You can change the priority of a process in Unix?
  
  Default database roles are created when you create a database?
  
  What is a control point?
  
  What process reads the data from the data files?
  
  Which process writes data to the data files?
  
  Can you do a CanGrow Datafile. If so, how?
  
  What is a shared pool?
  
  What is kept in the database buffer Cache?
  
  Maximum how many redo Logfiles may have a database?
  
  What is the difference between PFile and SPFile?
  
  What is the PGA_AGGREGRATE_TARGET parameter?
  
  
  Any other suggestions?
  
  Published by: WhyNotOracle on February 3, 2010 23:09

  John Hallas wrote:
  In fact for a very junior position I don't think they are too bad a series of questions. They test the basic oracle and unix skills.

  However, I prefer to enter into a discussion with a candidate by starting a very simple as question "what is the difference between logical and physical forward. Once it is answered you may ask why do you use logic, when using DG, which is DG broker, how do you build a standby, all according to the depths you want to enter. How the candidate's responses take you different paths.

  Another favorite of mine is "what does 11 GR 1 material (or R2 now) you are interested in must" even if they have not used 11G I expect to have some opinion on what is and to come.

  As I say, simple questions that you can take as deep you want to go based on the strength of the candidate.

  www.jhdba.WordPress.com

  Agree. It's pool question seems more appropriate to JuniorDBA. I guess that WhyNotOracle drawings for their management or simple filtering.

• No speaker sound by activating during the call with 5.1.1 23.4.A.0.546 R6C

  Hello

  I just received my repair z3c (camera problem). When I activate the speaker during the call since there is no sound at all. The diagnostic test on the z3c works correctly.  I guess this sw related so but is this problem known by others?

  Problem solved after the firmware upgrade.

• My computer fills up during the night with 50 GB of additional storage used. Why would he do that?

  I have a 500 GB hard drive. He "filled." 0 bytes left. I bought an extra external hard drive and have installed 250 GB on the new hard drive. I did NOT use the computer during the night. In the morning, the original hard drive was new. Why would he do that?

  I suggest you use a utility like the size of the folder to try to identify where the records are piling up.

  (for example I recently used it to track down a mystery space where it turns out the user contained a diagnostic trace activated accidentally in a safety program that created constant log files in a deeply nested subfolder.)

  Download it here.  With any freeware watch carefully for dishes bug prompts during installation.

  http://www.Mindgems.com/products/folder-size/folder-size-download.htm

  Also, I've seen some hard to find root kits that Norton probably would not find cause this problem. I suggest that you run these additional free tools-

  TDSS Killer
  http://support.Kaspersky.com/5353?El=88446

  By downloading and installing these be sure to get the free version. Say no
  for all offers free trial or the auto update during installation to keep the functional free version.

  Malwarebytes
  http://www.Malwarebytes.org/products/malwarebytes_free/

  SUPERAntiSpyware
  http://www.SUPERAntiSpyware.com/

• How to transfer the text value of the element with the character of new line between pages?

  Hello

  I use the Application Express 4.2.2.00.11 on the 11g XE database. In my application, I use the transfer of certain values deposited between pages on a lot of places in my application. But now I have a specific problem with a textarea element.

  I have the page with the textarea element and I transfer element value to another page using the link button. I use "Set these elements" "with these values" mechanism.

  Everything works fine until I try to add the new line character in the area of the text box to be transferred to another page. I get this error message when I try

  Contact your administrator for the application. The checksum calculated on the basis of the application, clear the cache, names of arguments and argument values (711P711_TEXTabc CRC [A55D4D4B325E23CB83EF28FB7671E8F0]) does not match the checksum passed to the procedure of show (23CC724ADDA630B6F3BDFD2FEE1498E0). Note: users receive a different error message.

  Transfer of value to another implementation of page when I 'abc cde' in the text box.

  Transfer of value to another page do not work when I 'abc [line break] cde' in the text box.

  Value of transfer with the new line character point works when I change "Arguments must have checksum" "Unrestricted" on the landing page. But I want to use the shared services provider and do not want to disable checksum calculation.

  It seems that there is a bug in the function of calculation of sum of internal control...

  You have some tips?

  Cardel wrote:

  I use the Application Express 4.2.2.00.11 on the 11g XE database. In my application, I use the transfer of certain values deposited between pages on a lot of places in my application. But now I have a specific problem with a textarea element.

  I have the page with the textarea element and I transfer element value to another page using the link button. I use "Set these elements" "with these values" mechanism.

  Everything works fine until I try to add the new line character in the area of the text box to be transferred to another page. I get this error message when I try

  Contact your administrator for the application. The checksum calculated on the basis of the application, clear the cache, names of arguments and argument values (711P711_TEXTabc CRC [A55D4D4B325E23CB83EF28FB7671E8F0]) does not match the checksum passed to the procedure of show (23CC724ADDA630B6F3BDFD2FEE1498E0). Note: users receive a different error message.

  Transfer of value to another implementation of page when I 'abc cde' in the text box.

  Transfer of value to another page do not work when I 'abc [line break] cde' in the text box.

  Value of transfer with the new line character point works when I change "Arguments must have checksum" "Unrestricted" on the landing page. But I want to use the shared services provider and do not want to disable checksum calculation.

  It seems that there is a bug in the function of calculation of sum of internal control...

  You have some tips?

  This is one of the many reasons why it is inappropriate pass strings of characters between the pages through the URL. Instead of using a redirect button, change the button to send the page, then use the conditional calculations to set the values on the landing page and finally access the page using a conditional on submit: before Validation: (after calculation and before Validation and treatment) branch. When you press button terms of use on the calculations and the direction.

• xmlObject - value of the element with a particular attribute

  Hello

  In an xmlObject, I try to set the value of the element xml with a special attribute, but it does not work

  //get value of element with a particular attribute
  var myValue = xmlObject.ELEMENTS.ELEMENT.(@category == "myCategory"))// works fine
  //set value of element with a particular attribute
  var myValue = "foo"
  xmlObject.ELEMENTS.ELEMENT.(@category == "myCategory"))= myValue // doesn't work
  

  Thanks for your help

  Concerning

  The E4X (?) XML syntax is powerful, but you can easily get lost with the bad node types. That is why my answer included the .writeln $ nature - 'list' - and used an index for the change; After validation, I found that your assignment would have also worked on the only indexed element. Thanks for sharing your discovery with setChildren() - who apparently works also on the lists.

  Dirk