Remove the entries in the table less resolution to
For example, I have the following table:
[1 k, 2 k, 3 k, 23 k, 24 k, 25 k, 26 k, 51 k, 52 k, 54 k, 56 k, k 76, 78 k]
For example, the resolution is 10 k
I want to process the table in a way so that it returns a table with the frequencies-more-than-resolution deleted while at the more-than-resolution-frequencies only maintain the highest and delete the rest.
In the table above, I've separated the elements to indicate the Group of frequencies forming 'more-than-resolution-frequencies' example 1 k, 2 k, 3 k are more-than-resolution-frequencies
The resulting table should look like.
[3 k, 26 k, 78 k]
In the example above, there are 3 groups of frequencies ilustration purposes, but it could be any number.
Round table and removing duplicates close brings the result but this adds an error equal to the resolution.
I hope this helps.
Tags: NI Software
Similar Questions
-
Remove the Table created in the forms - IOM Designer
Dear all,
Is it possible to remove the Table created in the form designer?
The Recycle Bin icon is disabled in the console of the design.
Thank you for your helpRestore the database.
This is an instance of dev is for. :)
Best regards
/ Martin -
How to remove empty entries in a table and replace them with the values of the instance?
I have a table with values and spaces elements. I want to organize items such as table contains only values eliminating the empty spaces and re-organize the table with the values of cotimuous. I use a bollean table to populate the items, so the bolleans to false fill the empty I don't want spaces. How can I program the above operation?
Thank you
Thank you for your solution, but I just found an easier way. INDEXING CONDITIONAL!. How I miss that. in any case, thanks...
-
Compare the Collection with the help of the Table less
Hey there!
my plan is to transfer an excel file and record in an apex_collection, compare the results with those that already exist in a specific table and write it in another temporary table.
Import excel, in the collection works perfectly, but I fight with the comparation. I select the form of entries collection and using UNMIS to compare lines with those of another SELECTION that gets the lines of the existing table.
DECLARE
BEGIN
INSERT INTO UPLOADED_DID_LIST_COMP (BAC_CODE, UPSC)
(
SELECT BAC_CODE c001
c002 published
From apex_collections ca
WHERE collection_name = "UPLOADED_EXCEL."
LESS
SELECT
BAC_CODE
EDITED
OF UPLOADED_DID_LIST upld, apex_collections c WHERE
collection_name = "UPLOADED_EXCEL."
AND the upld. BAC_CODE = c.C001
AND the upld. LʼUPSC = c.C002
);
End;
This does not work because of this error:
ORA-00933: SQL command not properly ended ORA-06550
PLS-00103: encountered the symbol "end-of-file" when awaits one of the following numbers: (begin case declare exit end exception for goto rise back loop mod null pragma select update while < ID > < a quot double)
If it's a copy/paste of your exact code then you just need to fix it, spaces here and there. And remove the superfluous where clause. Maybe:
BEGIN
INSERT
IN UPLOADED_DID_LIST_COMP
(
BAC_CODE, SCHOOLING
)
(
C001 SELECT BAC_CODE, EDITED C002
FROM APEX_COLLECTIONS CA
WHERE COLLECTION_NAME = "UPLOADED_EXCEL."
LESS
SELECT BAC_CODE, SCHOOLING
OF UPLOADED_DID_LIST UPLD
);
END;
Good luck.
-
Remove the table for a photo table control framework
Hello
I need to create an array of 2D images. Due to the large amount of elements in the array, the width of the image is reduced to a minimum. However there are still a considerable gap between the 2 adjacent elements in the table (see the attached example), which is caused by the picture in the image control.
I tried to affect the color of transparent photo frame, but even if it is invisible, it is still there. I tried to customize the control too, but I couldn't find a way to remove the framework (for classic and modern styles).
(BTW, for the control of classical style, there is an option without color box control framework, but no option for 2D image control.) I need model/photos inside the element of control 2D image, so simple color 1 color box is not enough)
Could someone help to suggest a way to remove the frame and optimize the density of space in the table? Thank you much in advance.
PJI
Hello, PJI,.
You should be able to define the lower field in the area of the image of the control.
-Right click Control and choose "Advanced Properties"-> "Customize.."
-To the editor change order to 'Edit Mode'
-from the menu, click on 'Window'-> 'display the parts.
-In the part window, select the frame
-set new values for top, left, height, and width, so that the image is behind the area of the photo
I hope this helps.
UliB
-
Remove the table if the value not in APEX_APPLICATION. G_f01?
Hello again!
I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.
I can't understand the sql code to do this, could someone give an example?
This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.
EgaSega wrote:
I have an apex_application.g_f01 that contains the values in the boxes, now I want apex to remove rows from the table that contains values that are not present in the G_f01 (what are disabled) on submit.
I can't understand the sql code to do this, could someone give an example?
This can be a simple thing, but I'm getting confused a lot with sql, maybe because I just php and java.
One possibility would be to create a collection of APEX containing key checked values and use that as the source of the lines to be kept in the SQL delete. Something like:
begin apex_collection.create_or_truncate_collection('CHECKED_VALUES'); for i in 1..apex_application.g_f01.count loop apex_collection.add_member( p_collection_name => 'CHECKED_VALUES' , p_c001 => apex_application.g_f01(i)); end loop; delete from t where not exists (select null from apex_collections c where collection_name = 'CHECKED_VALUES' and c.c001 = t.id); end;
-
How to remove the table border
Dear Kings.
I was trying to remove the borders of tables (my coding below).
This encoding does not "result: undefined"? How to remove all borders from the table. Please suggest friends.
var mTables = app.activeDocument.stories.everyItem().tables.everyItem(); with (mTables) { topBorderStrokeWeight = 0; bottomBorderStrokeWeight = 0; leftBorderStrokeWeight = 0; rightBorderStrokeWeight = 0; } alert("Done")
Thank you in advance to all
Try this,
if(app.activeDocument.stories.everyItem().tables.length>0) { app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().bottomEdgeStrokeWeight = 0; app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().topEdgeStrokeWeight = 0; app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().leftEdgeStrokeWeight = 0; app.activeDocument.stories.everyItem().tables.everyItem().cells.everyItem().rightEdgeStrokeWeight = 0; }
-
How to remove the Tables of HFM Application in SQL
Hi gurus
1. how to remove the HFM Application Tables in SQL?
Its manual removal but each application having 120-150 tables? How to do this in one fell swoop?
I deleted some applications using the workspace / shared services, but still its display under HFM under the Tables of SQL Server.
Please help me
concerning
SmileeHi Smilee,
1. If the application opens in the web management interface, go to Taskflows management module and make sure that no taskflows exist yet for this application. Remove any existing taskflows.
2. If demand exists in Shared Services, right-click on the demand for Shared Services and try to remove the application from here
3. stop Hyperion Shared Services and all the Windows of financial management processes and backups of the relational database of the two patterns.
4. check the relational database of Hyperion Shared Services repository, in the "ces_apps" table and make sure that there are no lines containing the appname "EXAMPLE." If the line still exists you should enlist the help of Oracle Global Support software to clean Hyperion Shared Services before proceeding.
5. it is possible to remove all content removed from the relational database of financial management application. Must be very careful when handling manually tables database that permanent damage can be done at the application and other applications if the wrong content is removed.
(a) first remove all tables, indexes, sequences, and the package objects that begin with the name of the application
(b) remove all tables starting HSV_appname_xxxxxx
(c) remove all rows in tables referring to demand HSX_CLUSTER_xxxxx.
(d) delete all the HSV_ACTIVITY_KILL_USERS, HSV_ACTIVITY_NO_ACCESS, HSV_ACTIVITY_SESSIONS and HSV_ACTIVITY_USERS and HSV_USERS_ON_SYSTEM lines that refer to the name of the application.
(d) remove the line containing the name of the application from the HSX_DATASOURCES table.6. the next time that all Hyperion services are restarted, the application must be removed safely from Windows client.
You can contact your DBA to write a query on how to remove it.
Hope this helps,
Thank you
Charles Babu J -
Remove the Table of contents of a Quiz
Hello
Is it possible to remove access to the training when the user passes a test? Looks like there must be a way...
Dan
Action Rod pointing to that is to assign the value 1 to the system variables cpLockTOC. Its default value is 0. It is not even necessary to have a tip action, at least if you're on a later version of Captivate because the system variable is not in the drop-down list of the accordion to Actions in the slide properties. A simple action on enter to the first question slide will do. Don't forget to switch it to 0 when you enter backstage after the quiz to allow access again. And the linear?
It is also possible to hide the table of contents with another variable of system but only if you use the table of contents in overlay mode.
http://blog.lilybiri.com/system-variables-in-Captivate-6
Lilybiri
-
Why can't remove the table?
I find a table under soctt Solaris 11g, named BIN$ dnz9wkbnQZaxdctGcob3RA == $ 0, as follows:
SQL > select * from tab;
TNOM TABTYPE CLUSTERID
BIN$ dnz9wkbnQZaxdctGcob3RA == $0 TABLE
BONUS BOARD
DEPT TABLE
EMP TABLE
SALGRADE TABLE
I do not know when the table created, if I want to delete the table, can I use following command:
SQL > drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0;
drop table BIN$ dnz9wkbnQZaxdctGcob3RA == $0
*
Line 1 error:
ORA-00933: SQL not correctly completed command.
Why I can't remove this table? How to do?
Thank youHandle: EdwardKing
Status level: Beginner
Join date: 27 May 2002
Messages total: 61
Total Questions: 24 (24 remaining)
so many questions without answers ANY .
:-(http://forums.Oracle.com/forums/Ann.jspa?annID=718
Why I can't remove this table? How to do?
When a table is dropped, it goes in the TRASH; It may therefore be FLASHBACK.
What you're trying to DELETE a table already in the TRASH; is NOT authorized.
When all else fails, read the Fine
http://download.Oracle.com/docs/CD/B28359_01/server.111/b28310/tables011.htm#ADMIN11682
Published by: sb92075 on February 11, 2011 17:47
-
remove the table filter criteria
I used af:table to display data and used the data in the column filter to filter. After you have specified any search criteria, that he must remove it manually, and then press ENTER. I want to remove the search by program criteria and display the data in the table without any search criteria.
How to remove table filter criteria in backing bean and update the table?
Thanks in advance.Use google and search for "programmatically manipulate filter a table QBE fields" (from steve muench) ;)
-
Removes the table causing a lot of disk reads
Until recently that we hadn't made many deletions on one of our large tables in the comic book. After a recent project has been implemented, system performance has gone downhill a bit. Research in one of the top offenders through v$ sql, we find this:
REMOVE IRQ INSPECTION_REQUEST WHERE WORK_ORDER_SEQ =: B1 AND SEQUENCE_ID IN (SELECT SEQUENCE_ID FROM (SELECT SEQUENCE_ID, CHAR_VALUE FROM INSPECTION_REQUEST_CHAR WHERE WORK_ORDER_SEQ =: B1) X WHERE THE CHAR_VALUE IS NULL).
Here are some stats I see in table v$ sql:
Performances: 4
Analyze the calls: 4
Disk reads: 565457
Gets the buffer: 634626
Time CPU: 69280000
Elapsed time: 290015297
If I read this correctly 100 000 disk reads are performed on average whenever this statement is executed. The situation that I am is that the table we are trying to remove from has not been analyzed in almost 2 years and many of the indexes on the table have not been analysed in more than a year. Is my problem here something to do with the fact that this analysis has not been done or is there something else, I'm missing?
We checked the SQL to use the correct index and it is set to perform at its best. We have also tried to run this in our dev environment, and we have the same problem with the slow delete. We even watched the rowid for a row we try to delete and tried to delete by the rowid and the DB is still thousands of readings of the disk to perform this deletion. Our dev table and all the clues have been analyzed recently (last month or almost).
So maybe it takes away the possibility that the absence of analysis of the tables and indices of production contributing to the issue. At this point, I am at a loss. Here is the statistical information for this table in the production.
Parameter, value
Size in MB, 20464.00
Numbers Extents, 1279
Size in bytes, 21458059264
TABLE_NAME, INSPECTION_REQUEST
NOM_TABLESPACE, DATA_LARGE_2
CLUSTER_NAME,
IOT_NAME,
PCT_FREE, 10
PCT_USED,
INI_TRANS, 1
MAX_TRANS, 255
INITIAL_EXTENT, 1048576000
NEXT_EXTENT, 16777216
MIN_EXTENTS, 1
MAX_EXTENTS, 2147483645
PCT_INCREASE, 0
FREELISTS,
FREELIST_GROUPS,
LOGGING, YES
BACKED_UP, N
NUM_ROWS, 18095357
BLOCKS, 1196456
EMPTY_BLOCKS, 0
AVG_SPACE, 0
CHAIN_CNT, 0
AVG_ROW_LEN, 485
AVG_SPACE_FREELIST_BLOCKS, 0
NUM_FREELIST_BLOCKS, 0
DEGREE, 1
CASE 1
MEMORY CACHE, N
TABLE_LOCK, ENABLED
SAMPLE_SIZE, 18095357
LAST_ANALYZED, 2007-04-01 06:41:24
PARTITIONED, NO.
IOT_TYPE,
TEMPORARY, N
SECONDARY, N
NESTED, DON'T
USER_TABLES, DEFAULT
ROW_MOVEMENT, DISABLED
GLOBAL_STATS, YES
USER_STATS, NO.
DURATION,
SKIP_CORRUPT, DISABLED
SURVEILLANCE, NO.
CLUSTER_OWNER,
ADDICTIONS, DISABILITIES
COMPRESSION DISABLEDuser9539428 wrote:
delete from inspection_request where sequence_id = 9911147198;
SEQUENCE_ID is the primary key on the table INSPECTION_REQUEST. This only delete statement performs 7 000 disk reads. Is this normal? We have this problem even if it is disable triggers that would fire following this statement.
To everyone who looks at the thread, the version of db, on that we are is 9.2.0.8.
If you have verified that all triggers are actually disabled on the table, there are a few potential candidates that could cause this large amount of activity during the removal of a single line:
* Enabled foreign keys referencing this table
* Maintenance of Index, your index finger on the table could be degenerate and could benefit from an operation of "merge".
* Bugs in SAMS if you use a tablespace locally managed with automatic management of the space for indexesYou can follow this thread that might have similar problems:
Ellapsed time too tkprof output
Try to run the simple removal using SQL trace enabled (Event 10046) scopes as described in the above thread. After the release of "tkprof" of the trace file generated here, as described in the following thread: [when your query takes too long | http://forums.oracle.com/forums/thread.jspa?threadID=501834]
Kind regards
RandolfOracle related blog stuff:
http://Oracle-Randolf.blogspot.com/SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676 /.
http://sourceforge.NET/projects/SQLT-pp/ -
Hello
I'm trying to find a way to delete a selected line in a text file. You can find a classic text file that join this message.
I first try to insert the text file in the command using node property value drop-down list box, but I see that the first line. I did the same thing with a command table and it works! Now, I need to select a row and delete it. I try to use the node property of the active cell, but I always get (0,0). Why? Someone knows how to do?
Better idea to do the same task is also welcome.
LabVIEW 8.5 windows XP
Thank you
Francis
Hi Francis,.
You should try using the attribute SelStart to the table rather than the property of the Active cell. Active cell is just used to set the active cell. Here is a quick change that I made to your code that deletes the selected table row when you press the button Delete and resulting out of the table. I hope that you should get pointed in the right direction.
-
convert the table less smaples per second
Have great picture with 9 channels of data by time stamp.
Timestamp shows that there are about 100 samples per second.
I need to generate the table that displays only an average value per channel, per second.
Faced with the 'picture of generation' and 'index' to get the picture right.
Suggestions?
markfranklin wrote:
Faced with the 'picture of generation' and 'index' to get the picture right.
Suggestions?
I bag the building and indexing and discover the screw decimate in the range of Signal Processing. Unless you're stuck with the basic version.
-
want to remove the table in 10g
Hi all;
I was 1 million inserting dummy records in the table.
Unfortunately, closed session without commit or rollback.
> > now, I want to delete the table
SQL > drop table petra.ycx;
drop table petra.ycx
*
ERROR on line 1:
ORA-00054: resource busy and acquire with NOWAIT specified
SQL > select count (*) in the petra.ycx;
COUNT (*)
----------
2
SQL > select a.sid, a.serial # session $ v a, v$ locked_object b, c dba_objects
2 where b.object_id = c.object_id
3 and a.sid = b.session_id and OBJECT_NAME = 'YCX. "
SID, SERIAL #.
---------- ----------
11 159
SQL > alter system kill session 11 159;
alter system kill session 11 159
*
ERROR on line 1:
ORA-00026: missing or not valid session ID
The command is
alter system kill session '159,11';
Justin
Maybe you are looking for
-
On my XP, the option screen 'import' shows IE and Netscape/Mozilla as choice; on this Windows 7 computer, the only option is IE. Back on does not help, and the Firefox installation went well.
-
MSATA is based on satellite A660-1FM?
Hello I'm a happy user of Saltellite A660-1FM. recently I started to look for the upgrade of my HDD to the SSD. I can not find answer to two questions: -did slot for mSATA SSD? -support SATA III via his conector of HARD drive? Thank youM
-
Installation of 8.6 and 8.6.1 8.6.4 VDM
Hello When VDM released 8.6, the Vision Assistant has a bug of not being able to apply the filter particle visually thereon, this has been fixed by a patch 8.6.1. Recetnly, NOR also relaeased 8.6.4 VDM that is about 500 MB. They mentioned that it doe
-
Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception. Heres the log Context where the exception was taken:(No context - the unhandled exception) Size version of Base module-------------------- ---
-
M5777dn: M577 incapable of Duplex
I have a printer color Laserjet M577dn on a 64-bit computer win 10 which is not automatic duplex. I have uninstalled/reinstalled the software with no luck on resume. It worked for a little while, and then stopped. Win 7 machines work fine with automa