RPC error string

Similar Questions

• Express dialogue VI file modifies the error string

  Hello

  today I got a strange error message form the express VI of the file dialog box (with the name of the new folder dialog box):

  1055 error has occurred in the new folder dialog box-> check if the directory exists.vi-> configure the directory path.vi-> load PS config-> program.vi Triax file.vi

  Possible reasons:

  LabVIEW: Object Reference is not valid.

  After some research, I discovered, that VI is not the source of the error, it has just changed the information received from the error in terminal.

  Is this a known problem in Labview 2011? I have not found anything.

  The expressway screws work is that they generate a real VI that will be executed whenever you change the configuration and that VI is saved as part of the VI call. You can watch the VI generated by VI right-clicking and selecting Open the front panel, which will be asked if you want to convert. If you do this and look inside the real VI she calls, you will see that it performs an unconditional call for a VI that modifies the error string. I would say this call should probably not do if it the error was true, then I would call it a bug.

  In practice, I'd say the best option is to call the primitive file of dialogue yourself or call errors to merge and put the initial mistake of wire on top or wrap all express VI into a case of error structure.

• Adding new SCSI controller: "error string: invalid operation for the '0' device.»

  Hello

  I have a problem when I try to add a SCSI controller to a virtual machine.

  I have this error:

  Error string: invalid operation for the device '0'.

  Lack of details: InvalidDeviceOperation

  Here is my code:

  my $info = Description-> new (label = > summary of "" SCSI controller 2 ' = > 'LSI Logic parallel' ");

  my $controller = VirtualLsiLogicController-> new)

  deviceInfo = > $info,

  scsiCtlrUnitNumber = > '7'.

  sharedBus = > VirtualSCSISharing-> new ('noSharing'),

  busNumber = >-1,

  key = >-1,

  backup = > $backing_info,

  controllerKey = > 100,

  );

  My $devspec = VirtualDeviceConfigSpec-> new (operation = > VirtualDeviceConfigSpecOperation-> new ('add'),)

  device = > $controller,

  fileOperation = > VirtualDeviceConfigSpecFileOperation-> new ('create').

  );

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange = > [$devspec]);

  {eval

  $vm_view-> ReconfigVM (spec = > $vmspec);

  Util::trace (0, "Controller has been created. \n") ;

  };

  I don't know how to handle, or even how to solve problems.

  Any ideas would be greatly appreciated.

  Kind regards

  Jeremy

  I finally found a solution.

  It seems that it fails if you give a marked as mandatory parameter (scsiCtlrUnitNumber, hotAddRemove)... Theses parameters seem to be set automatically, a dump of the device which will show.

  Here's the code used:

  My = $controller_spec

  VirtualDeviceConfigSpec-> new (device-online VirtualLsiLogicController-> new (key-online 0

  device-online [0],

  busNumber => $scsi_controller.

  sharedBus => VirtualSCSISharing-> new ('noSharing')),

  operation => VirtualDeviceConfigSpecOperation-> new ('Add'));

  My $vmspec = VirtualMachineConfigSpec-> new (deviceChange-online [$controller_spec]);

  {eval

  $vm_view-> ReconfigVM (spec-online $vmspec);

  };

• trying to deform stabilize 4 k images and then reduce to 1080 p before exporting it but error "string stabilizer requires clip dimensions to match sequence settings try nesting.

  I have a 8 min long 4 k sequence where all the video clips are the same size k 4. I can warp stabilize just fun but when I go on change settings for the sequence to 1080 p and then right click on each clip to scale to the framework I get error "string stabilizer requires clip dimensions to match sequence settings try nesting" the reason why I want to warp stabilize the 4 k images rather than 1080 p images is because with 4 k I have a budget of high culture, I can get away with before I got to the bottom of the scale, string stabilizer settings I use are in the jpg I have attached. I tried visualization of nesting videos online and I can't find what I need. As the now the only viable option I must deform stabilize 4 k and export under 4 k and then open a new project and import the stabilized 4 k images exported and reduce the sequence to 1080 p. I'll do that if I have to, but it will take a lot of time coding without a doubt. Any help is greatly appreciated.

  If the images do not match the sequence settings and you want to use the chain, you'll nest.

• literal error string not ending whenever firefox opens a page.

  Every time firefox opens a new page, the error appears. He said: error Javascript at the top of the window for error - and the error is 'incomplete string literal. It is very annoying, some pages have several instances of the error window popping up above the other. I rebooted, no change program. I'm ready to give up and go to the Chrome (which has no error)

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.

  If it works in Mode safe mode and normal mode with all extensions (Firefox/tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit)

  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Subset of the Serial error string

  Hello world

  I have a simple program. I used arduino to transfer a string to labview.

  And in Labview, I want to chain of subset. But she works only first string and the strings later be not subset.

  Can you help me find my error?

  Thanks for reading

  Here is my code and my mistake

  

  Here is my video: https://www.youtube.com/watch?v=Gm5nOrZ3iyo

  Here's my arduino code:

  #include
  #include
  int i = 0;
  LiquidCrystal_I2C lcd (0 x 27, 20, 4);  set address 0 x 20 for a 2 line display and 16 characters LCD

  void setup()
  {
  LCD.init ();    initialize the LCD
  Serial.begin(9600) (9600);
  attachInterrupt(0,irt1,CHANGE);
  attachInterrupt(1,irt2,FALLING);
  Print a message on the LCD screen.
  LCD.backlight ();
  LCD. Print ("Hello, world!");
  Serial.Print ("Hello, everyone");
  Delay (1000);
  LCD. Clear();
  }

  void loop()
  {

  While (Serial.available ())
  {
  tank r = (char) Serial.read ();
  if(r=='t')
  {
  lcd.setCursor (0,0);
  LCD. Print ("you're a robot");
  Serial.Print ("you robot\n");
  }
  ElseIf (r = ' a')
  {
  lcd.setCursor (0,0);
  LCD. Print ("you're human");
  Serial.Print ("you human\n");
  }
  }
  }

  Sub irt2()
  {
  Delay (1500);
  i ++ ;
  If (i %2)
  {Serial.print ("ngaysinh010071992\n") ;}
  on the other
  {Serial.print ("ngaysinh123455\n") ;}
  }

  I advanced and did a cleansing of your diagram.  See if that makes sense.

  

• Display error string indicator messages

  Hello world

  This time, my dilemma is as follows:

  I work in a machine control application where I provide a display of error messages to show the machine Operteur some text links to the fault. I intend to use an array of strings and a logic to select the message to be displayed as a result of the fault using index string array to display the message in an indicator of the chain. Now, one of the requirements is that if by any reason the machine has a fault, all the defects that are displayed in the GUI at the same time, here is where my problems start. I show you a message by line, so I intend to use the end of the constant line with a string concatenation. I did a few tests with my idea, but the messaes fault shows a fixed line according to the position of entry her concatenate, I need the error messages to be displayed in the order that they appear.

  If someone did something like that before, or has an idea how do or if there is a better way to do that I have in mind (as explained above), I'd appreciate the help. Thank you!

  See if it works.

• Error 200010 not generating error string

  Hello

  I have therefore a situation where I use a task redeclenchables DAQ to acquire data, and just recently, I had a problem came. I have the diagram following error-capture. On the appropriate line, I have:

  if(ev = DAQmxStopTask(ce.cTask)) { goto error; }
  

  Who goes to the 'error' of the program area (where I do garbage collection operation, error popups, etc., basically emulating the try-catch statements):

     error:
  
      if(ce_locked) {
          CmtReleaseLock(lock_ce);
      }
  
      SetCtrlVal(mc.mainstatus[1], mc.mainstatus[0], 0);  // Experiment is done!
      SetCtrlAttribute(mc.mainstatus[1], mc.mainstatus[0], ATTR_LABEL_TEXT, "Stopped");
      SetRunning(0);
  
      if(data != NULL)  { free(data); }
      if(avg_data != NULL) { free(avg_data); }
  
      if(ev)  {
          if((ev < -247 && ev >= -250) || (ev < -6201 && ev >= -6224)) {
              display_ddc_error(ev);
          } else {
              uInt32 es_size = DAQmxGetExtendedErrorInfo(NULL, 0);
  
              char *es = malloc((es_size > 0)?(es_size+1):100);
  
              if(es_size > 0) {
                  DAQmxGetExtendedErrorInfo(es, es_size);
              } else {
                  sprintf(es, "Unknown DAQmx Error, code was %d", ev);
              }
  
              MessagePopup("DAQmx Error", es);
              free(es);
          }
      }
  

  I use a USB-6229 M Series DAQ, ce.cTask is a task of counter, which is built (without raising errors) to be triggered by an external channel, and then trigger a square wave that triggers each point in the acquisition by another task, ce.aTask. He has done this way so that I can do things like acquiring 2 seconds, wait a varied amount of time, then acquire for another 2 seconds. Currently, what I do is simpler than ce.cTask is on/Dev1/ctr0 and ce.aTask is triggered by Ctr0InternalOutput. It has always worked in the past.

  I've been through with breakpoints and it certainly seems like triggers of ce.cTask very well, all data are read in by aTask and everything's going peachy keen without error until the line where I try to stop ce.cTask. This throws me error 200010, but DAQmxGetExtendedErrorInfo (NULL, 0) returns 0, and if I just encode in hard es_size to something like 10, I had an empty string. I see no error description 200010 everywhere online, other than a few forum posts related to read buffer overruns, I highly doubt the question to stop a meter spot. No idea how to solve this problem?

  Edit:

  I changed the audit for this errors:

  if(ev = DAQmxStopTask(ce.cTask)) { if(ev != 200010) { goto error; } }
  

  Things are working as they did before, and I've seen no consequence. I'm still a little worried that I hardcode in a mechanism to ignore a specific error code, however.

  Hello, passing this error code to the DAQmxGetErrorString function returns the text "over acquisition or generation has been stopped until the required number of samples have been acquired or generated": it seems that if you stopped the task early, then you can check your code for such a condition. Using the function DAQmxIsTaskDone can help you avoid this condition.

  I'm not sure about this, but the reason why the DAQmxGetExtendedErrorInfo does not return a any description can reside in a function any DaqMx which is performed without error after that you get the original error (maybe in your function SetRunning?): DAQmxGetExtendedErrorInfo returns meaningful information after a service error, so you must use DAQmxGetErrorString instead if you need perform certain other functions DaqMx before developing the error code to give information the operator. Alternatively, you can store extended information and error code before you clean up your environment and warn the operator after this moment with the information in memory.

• NI-VISA error string

  Hello:

  Is it support in the library of NI-VISA (4.6 and more) to get the string describing an error message returned by a function? NOR-DAQmx has this kind of facility, for example.

  Thank you

  -Ilya.

  I found this:

  ViStatus viStatusDesc (ViObject vi, ViStatus State, Bruno [desc])

  The viStatusDesc() operation is used to retrieve a readable string user that describes this status code. If the string cannot be interpreted, the operation returns the warning VI_WARN_UNKNOWN_STATUS code. However, the output desc string is valid regardless of the return value of status.

  -Ilya.

• Create object of type integer error String

  Hi all

  I use JDev 12.1.2.0.0

  I created a selectManyChoice based on a data control that I did a view with a single column (which is a string).

  I set the properties of the component to be immediate = true and autosubmit = true and I have a method that I have already tried with other components like that and I know it works, but the method runs. It gives the following error:

  < 21 February 2014 10:04:41 AM GMT > < error > < oracle.adfinternal.controller.application.AdfcExceptionHandler > < ADFC-50016 > < ADFc: when Manager application exception exception handling threw a new exception.

  oracle.jbo.domain.DataCreationException: Houston-25009: failed to create an object of type: java.lang.Integer type: java.lang.String with value: General BI seller

  ....

  Caused by: java.lang.NumberFormatException: for input string: "General BI vendor.

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:65)

  at java.lang.Integer.parseInt(Integer.java:492)

  at java.lang.Integer.valueOf(Integer.java:582)

  .....

  I think that his is a normal behavior of the component, it tries to convert the full text but I've not specified for this component and I have other elements (selectManyChoices) that return string values where this doesn't happen.

  How can I fix?

  Here is the code for my component:

  < af:selectManyChoice value = "#{bindings." TypeSellerList1.inputValue}.

  label = "#{bindings." TypeSellerList1.label}"id ="smc3.

  autoSubmit = 'true' immediate = "true".

  valueChangeListener = "#{OBIEE_managed_bean.» TypeSellerListSelection} ">"

  < f: selectItems value = "#{bindings." TypeSellerList1.items}"id ="si6"/ >

  < f: validator binding = "#{bindings." TypeSellerList1.validator} "/ >"

  < / af:selectManyChoice >

  Any idea on how to solve this problem?

  Respect and thanks for the help,

  Frederico.

  I'm very well thank you Frederico. Hope you are fine as well.

  I just saw that you have a validators on your component. Try commenting on this line and test again.

  Thank you for your congratulations

  Antonis

• RPC error module on the second charge

  I have a module that calls a remote object to a cfc. the cfc is a CRUD of base built with the CF Wizard in Flex Builder 3. I have data variables that can be linked in the main application that I use in this module by using the 'parentApplication.myVariable '. now my app saves the form first, it is responsible and it will save as many times as you want, but if you close the unit and charge it. It gives me this error
  
  [Error CPP faultString = "Unable to invoke CFC - OBJ Variable is not defined." faultCode = "Server.Processing" faultDetail ="'"]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal:faultHandler () [C:\autobuild\3.2.0\frameworks\p rojects\rpc\src\mx\rpc\AbstractInvoker.as:220 ]
  at mx.rpc::Responder/fault() [C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responder .as:53]
  at mx.rpc::AsyncRequest/fault() [C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:103]
  to NetConnectionMessageResponder / statusHandler ([C:\autobuild\3.2.0\frameworks\projects\rpc\ src\mx\messaging\channels\NetConnectionChannel.as:569])
  at mx.messaging::MessageResponder/status() [C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx \messaging\MessageResponder.as:222]
  
  
  Now I've debugged to the point that she sends the obj I create, and it IS there.
  
  Is it something that I guess that to as flip a switch like creationPolicy = "all" or something.
  
  Thanks guys,.
  
  Link
  

  For anyone who has this problem. It is not your fault of CFC CRUD. If you switch to the modules of data, you must use the 'ready' property on the ModuleLoader to call a function. This function will be called and you can transmit your data in this persistent feature.

  I wrote about this on my blog here

  http://blog.tygate.com/?p=274

• PL/SQL: digital or value error: string buffer too small characters - LOV?

  Environment:
  
  APEX 3.1.1.00.09 under AIX 5.3 10.2.0.2 in
  
  Problem sample on apex.oracle.com:
  
  Workspace: GALWAY
  ID: GWICKE
  Password: GWICKE
  
  Application ID: 43172 (BUILDERPL) NOTE: there are three 3 applications with the same name, but this one is currently broken
  
  I get the dreaded "" ORA-06502: PL/SQL: digital or value error: character string buffer too small "when you try to create a new line."
  
  To reproduce the error:
  
  1 run page 3
  2 - Select any agency
  3 - Click on the button "create a new contract.
  4 - Select the start and end dates in the DATE picker
  5 - Click on the button "Add contract".
  
  If the line is added successfully if please go to Indianapolis and run the app for me since you obviously have the 'touch '! ;-) >
  
  But seriously folks,
  
  I've read many threads about this error and for the most part, they seem to point to large LOV. I have three 3 LOV on the page but only a 1 is dynamic and display and back elements are the same, a description in this case. There are 400 lines in the LOV table and the description is defined as VARCHAR2 (75), so we're not talking a huge amount of data.
  
  To further complicate the issue, this application was working just a couple of days. What changes I've made since a few days, you might ask?
  
  The only thing that comes to mind is I did go through the definitions of element and change the values of maximum size equal to the size of the columns in the target table, using a value of 22 for the NUMBER of columns.
  
  Since then I went back and changed at a much greater value than their corresponding column definitions, but nothing helped.
  
  Another interesting fact is that if an existing contract is selected on the page (Page 3 in my case) by selecting an agency that produces values in the second select list (selection of contract) and then clicking on "change this contract." After you change any value or fill in one of the missing values, click "Apply Changes" and he should have success.
  
  The new contract page and the page of modification of the contract are the same (Page 2) just with different buttons.
  
  Thanks a lot for any assistance. Indeed, it is greatly appreciated.
  
  -gary
  
  PS I also tried to change the LOV both given a popup and a standard text box I typed in, both received the same message.

  Gary - I deleted then recreated your DML process and it seems to have solved the problem. Export page reveals something odd in the process definition:

  declare  p varchar2(32767) := null;  l_clob clob;  l_length number := 1;beginp:=p||'F|#OWNER#:BUILDERPL_CONTRACT:P2_CONTRACT_SEQ:CONTRACT_SEQ|I';
  
  wwv_flow_api.create_page_process( ...
  

  That the assignment statement must not have ' F | "as the first two characters. There must be a bug in one of the wizards who created the process. Have you used a wizard to create the page?

  Scott

• search model error string

  Hello

  I encountered a problem using the model string search in labview.

  I use xbee modules pro digi to establish a network with 8 + knots (mode API). Each node has a microcontroller behind her who, when asked by the lv program, sends a package in the form of 01-08-07-04-00-00-00-00-00-00-40-64;

  This I would like to extract the received frame.

  This works for all units except one. When configuring the copy and placing another module (another address), the problem goes away, but I will not experience this problem when you are working in the field of risk

  There are 2 api has received the first one is a status of transmission and the 2nd is the received frame containing the data I want.

  To do this I put together the identifier of the received frame (0 x 90) the address of the module (8 bytes long), and network address (2 bytes), frame number for correspondence.

  I've included the vi, you can see and choose between working and not working data by using the command.

  Also I have included this screenshot of the xbee datasheet for information on the format of the received image.

  Can you see the mistake I do or has similar experiences?

  Kind regards

  Rob

  

  Hi kokodiem

  The problem you are experiencing is actually linked to the used regular expression. If you see the model match function help, you will see that there is a list for the "special characters". In this list, you will see that a + is interpreted as a regular expression rather than the sign '+' itself. In hexagonal presentation, the + sign is represented by the value 0x2B. As this value is used in the address of the string is not formatted, this means that your channel you actually have the sign '+', which means the function pattern he will perform as a regular expression.

  If you do not want Labview to find the special character itself, rather than interpretting it as a regular expression, you need to escape with one-(or hexagonal 0x5C). In the case of the unformatted string, so the original regex used was:

  \90\00\13\A2\00@V+\E5\FF\FE\01 or hex: 9000 13A 2 0040 and 562 b E5FF FE01

  Given that the + sign must be "escaped", the regular expression to use should be in this case:

  \90\00\13\A2\00@V\\+\E5\FF\FE\01 or hex: 13A 2 9000 0040 565 2BE5 DATA 01

  If you try the last of them, you will see that the string will be formatted correctly.

  You can find more information in the following forum post. It might be quite interesting to have a look because it contains an example of VI to escape special characters automatically.

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=51850&requireLogin=false

• analysis of the error string

  I try to extract a very large file of coordinates xyz.  However, every so often, there is a coordinate z with no. DATA expression rather than a value as follows:

  

  Is it possible to filter these?

  Any help would be appreciated.  Here's a preview of my VI, it seems to work for files without errors.

  

  
  

• Remote Desktop works Win 7, but local printer receives a RPC error

  I have several laptops with Windows 7, which connects to 2 computers, using Windows 7 via Remote Desktop. Except for 1 computer, all the Remote Desktop connections work fine.

  A laptop will connect with Remote Desktop very well and allow the user all privileges, except printing on the client computer. The printer is shared in the same way for other laptops, the printer appears as an option and is selected, BUT when a print job is requested, this laptop computer receives a CPP print server error message.

  I also tried to disable the firewall on this laptop and continue to receive a the same printer error, so I don't think that it is a firewall issue. I also replaced it with one of the other phones using the same material and the printer works fine. One last note, I checked that the dirvers impression is correct on the laptop problem. When you are working on the local client computer, the printer works fine, the printing problem occurs only with a remote desktop connection.

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps.