Rqonom.dll and ssqqnn.dll errors on start up.

Similar Questions

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• Need to fix dll errors on start.

  I get the error messages like zprsimtb.dll and qt5widgets.dll can not install when I start on Windows 7.

  I was getting errors of memory because the memories made their appearance, causing shut downs of programs and requiring a reboot several times a day.

  I would like any suggestions how to solve this ongoing problem.

  It seems that if your computer is badly infested with malware.

  Start by doing a free scan online at http://www.eset.com/us/online-scanner/

  Then download, install, update and run a full scan with the FREE of MalwareBytes AntiMalware version--> http://www.eset.com/us/online-scanner/

  The malware is preventing you to install MBAM, try to download and install MalwareBytes Chameleon--> https://www.malwarebytes.org/chameleon/

  Restart, then present the State of your system.

  If you still get an error message when you restart, please provide the full text of the message.

• PXE - E61 and PXE - M0F errors when starting on Satellite L40 - 12 K

  I have satellite L40 - 12K, with vista home premium.
  After a while, I saw two in the start screen error messages.
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  After contacting the helpline to a? ¬0, 50 per minute, they advised me to restore the PC hole. !!! @@$$%^^^&^%
  So I google on these errors and found to change the boot order.
  My default setting is:
  1 network (LAN)
  2 HARD DRIVE
  3 CD/DVD

  I changed it to:
  1 HARD DRIVE
  2 network (LAN)
  3 CD/DVD

  Now my error messages disappeared and see my screen to the user directly.

  Google so first of all, before you listen to paid helpdesk.

  Yes, sometimes they really Don t know the troubleshooting more simple that should be done by each call. So I hope someone writes good troubleshooting docs to improve their rate of success with such clients * easy * problems.

  Beautiful week

  Dennis

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I notice on my screen when Windows XP starts, it reads: load the dll error, below him, he reads: Can t Load Res-dll, less than OK

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lok e-mail, etc.then, it disappears. Thanks for your help, as you can see in my writing I'm not veru computer savy.  Mike Sabol

  Hi Mike... When the pop-up window appears at the top of the pop-up window, it should tell you the name of the software that is associated with the dll missing/corrupted. Please look and see if it is listed, and then tell us what software. Make sure that you list the full error message.

  In addition, do you use a Linksys router to connect to the internet? You should also do a scan with Malwarebytesmalware. It doesn't matter what other scanners you used. Scan with Malwarebytes. Thank you.

• I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

  Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

  Thank you.

  * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• MSOE. DLL error and downloads of many old emails

  whenever I get the msoe.dll error, I have to turn off my computer (in order to download email or check the internet), and then it starts the download of 7700 old emails that I deleted over and over again.

  If you use Windows Mail in Vista, then try to repair the database with my Windows Mail utility (www.oehelp.com/WMUtil/) and also check for interference of 3rd party program (seewww.oehelp.com/OETips.aspx#3).
   
  Steve
   
  "rascalthecat" wrote in message News: dec0c687-861e-44ab-9358-f9d25398cd2d...

  whenever I get the msoe.dll error, I have to turn off my computer (in order to download email or check the internet), and then it starts the download of 7700 old emails that I deleted over and over again.

• On the start screen, I get the message: "C:users\acer\AppData\Temp\_ME124042\Python27.dll (error Code 5).

  Original title: Dll error

  At the start I, a screen opens with this message: "C:users\acer\AppData\Temp\_ME124042\Python27.dll (error Code 5).

  I have problems with the game to the top of the files as well. Error number 5 keeps popping and I can not install unless I have run as administrator. I can't understand this. Could I have some clarification on this? How to fix this?
  Help please.

  The bottom worked for me

  1. Open Windows Explorer.
  2. Paste this ( %UserProfile%\AppData\Local\ ) in the address bar.
  3. Right-click on the Temp folder and then Properties - Security tab - Advanced button.
  4. Click the button Change Permissions .
  5. Remove all permissions.
  6. Select the entry for your username, then click on Edit .
     • Include the permissions that can be inherited from the parent of this object.
     • Replace all permissions of child object with permissions inheritable of this object.
  7. Click on OK .

  

• Try to install 2013 professional and get "windows\system32\d2d1.dll error".

  I am trying to install Professional 2013 and make me "windows\system32\d2d1.dll error". I thought it was a mistake to download so bought the dvd but is not no longer works. Ive tried a few fixes suggested by community in regedit and disabling the start up, but nothing works.

  Explorer has stopped working when I tried to switch to Explorer 10 then this first.  Counsel for a non tech person is welcome

  Hello

  Thanks for the reply.

  For Microsoft office related issues, post your question in the following link.

  Office

  http://answers.Microsoft.com/en-us/Office

• How can I fix error FaceHI.dll missing on start up

  How can I fix error FaceHI.dll missing on start up?

  Hello

  If you use a facial recognition software, please reinstall the software and check.

• When Windows starts, get this uncdms.dll error message problem

  Uncdms.dll error appears at the beginning upward. How can I fix it?

  original title: uncdms.dll problem

  If you really want to (I don't think that it is very good and it takes a lot of system resources):

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=55c18cb3-c916-4298-aba3-5b98904f7cda

  MS - MVP - Elephant Boy computers - don't panic!

• We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9 - &#62; data are not valid" a few times in the meantime.

  We monitor windows servers using pdh.dll and we receive "error PDH 0xc0000bc6:9-> the data is invalid" a few times. Need to understand what causes this and how to fix the same.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverManagement/threads

  Hope this information helps.

• WinHTTP.dll error then that he was trying to access Youtube and adobe Flash

  Original title: been trying to get in youtube and adobe flash, error screens keep coming by saying winhttp.dll must be reinstalled, but I don't know where to go or how to reinstall.
  

  How can I reinstall winhttp.dll

  have tried to get into youtube and adobe flash, error screens keep coming by saying winhttp.dll must be reinstalled, but I don't know where to go or how to reinstall.  Can u please help me?

  Hello

  1. what web browser do you use?

  2. If you are using Internet Explorer, version of Internet Explorer is installed on the computer?

  Method 1:

  Run the System File Checker and check if the problem still persists. To do this, please click on the link below:

  http://support.Microsoft.com/kb/310747

  If you are prompted to insert the disc to scan SFC, please visit the link below:

  http://support.Microsoft.com/kb/900910

  Method 2:

  This issue could also be caused by a Virus/Malware infection on the system, I would say that you download and run a full scan of the system using the Microsoft Safety Scanner and check if that helps resolve the issue.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 3:

  New user account

  Create a new user account and see if the problem still occurs in the new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.