Need to fix dll errors on start.

Similar Questions

• Fix DLL errors?

  I ran DLL files Fixer and we found 543 errors.  Microsoft offers a similar fixative which is free?  This is the program.

  http://www.dll-files.com/Fixer/

  Don't run no Fixer from third-party dll, "booster" file or any program that claims to fix windows errors. They do more harm than good. If you receive error messages that you pushed to use to file fixer, please post the error messages (exact text) here and we will be happy to take a look and provide assistance to solve problems.

  Good luck.

• Computer store installed XP pro, but does not give me an installation cd and now I need to fix registry errors

  My system started to plant without notice or blue screens. I installed "crashed" and I get the following

  Friday, December 2, 2011 1:51:22 CEST your computer crashed
  crash dump file: C:\WINDOWS\Minidump\Mini120211-02.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A59A)
  Bug check code: 0x1000008E (0xFFFFFFFFC0000005, 0xFFFFFFFF8055159A, 0xFFFFFFFFA990B974, 0x0)
  Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Friday, December 2, 2011 14:46:56 this computer crashed
  crash dump file: C:\WINDOWS\Minidump\Mini120211-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x5A5C)
  Bug check code: 0x1000008E (0xFFFFFFFF804DCA5C, 0xFFFFFFFFA8EC3C30, 0xFFFFFFFF80000004, 0x0)
  Error: KERNEL_MODE_EXCEPTION_NOT_HANDLED_M
  file path: C:\WINDOWS\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Since the shop which has improved my system is in Florida and also is no longer in business, I have no way to get a disc. What can I do to fix this?

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Please provide additional information on your system:

  Learned what was this upgrade and what that they upgrade/do to the system?

  What is your system brand and model?
  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)
  The afflicted system has a CD/DVD drive work?
  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
  Do you see that you think not you should see and when you see it?
  What do not you think that you should see?
  Your system seems to start OK and then crash or didn't he start not at all?
  If your system works fine, what do you think might have changed since the last time it worked correctly?
  Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
  Now provide more information about your system and data against more recent accidents.
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here (WhoCrashed is OK, but I have instructions for ASB).
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

  Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).  You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

  Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

  ==================================================
  Dump file: Mini102911 - 02.dmp
  Crash time: 2011-10-29 04:54:36
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Plant address: ntoskrnl.exe + 22f43
  Stack address 1: i8042prt.sys + 27fb
  Stack address 2: i8042prt.sys + 2033
  Battery 3 address: ntoskrnl.exe + 6e715
  Computer name:
  Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 2600
  Size of the dump file: 94 208
  ==================================================

  Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).

  If you want to load your crash dumps on your SkyDrive, you must also read this:

  Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

  Here is a link that tells you how to:
  http://explore.live.com/Windows-Live-SkyDrive-change-access-permissions-FAQ

  Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

  Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

  What you paste the return will look something like this link on my SkyDrive:

  https://SkyDrive.live.com/redir.aspx?CID=6a7e789cab1d6f39&RESID=6A7E789CAB1D6F39! 311

  While you wait, please follow these steps:
  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  Restart your computer and solve the outstanding issues.

• IMAQ.dll error when starting Windows

  Hello

  I have a little problem with Labview 8.6. After you have installed the driverpack for the dvd, my windows give my error

  Der Prozedureinsprungpunkt wurde in DLL "IMAQ.dll" non found "ProgramFPGAs".

  My tranzlation

  the "ProgramFPGAs" entry point is not found in the Dll "Imaq.dll.

  LabVIEW start racing without problem, only this message at windows start is boring.

  someone has an idea to solve the problem or at least stop that messagebox

  Thank you

  Hi DRhatje.

  Hello and I hope that your well today. Thanks for your post.

  I think it's a pretty good translation, the error message I thought lie in the below knowledge base article.

  The cause suggested for the error is that the IMAQ.exe is defined (by default) to boot at startup. But if you don't have a capture framer installed on the machine card then we could well see this error. The solution is to delete the exe file of the list on your system. The steps to do this is listed in the link below, but in short.

  Section in the screenshot you sent me, you should be able to select the "selective startup", then go to the "Startup" tab and uncheck the IMAQBoot.exe.
  If this restores the default settings on reboot, it's probably an indicator that your administrator rights on this PC are limited.
  I think that a quick way to check is to go to start > run and type "regedit". It is essentially a more advanced method to handle similar settings, but if you do not have Admin on the PC rights then you would most likely be denied access. In all cases, ask one of your colleagues in COMPUTING to use their passwords and change this setting. It will get rid of this warning you are seeing until you start to use our materials of industrial Vision and need to reactivate it.

  Make sure you click on 'Apply' before leaving this utility.

  Why do I get "IMAQBoot.exe - Entry Point not found" error when I restart computer?

  http://digital.NI.com/public.nsf/allkb/AD70B1036D5B950B8625752400578CFE?OpenDocument

  This should at least remove the error message when starting upwards.

  Please let me know how you and I hope this helps!

• How can I fix an error on start up: can not find the resource file?

  After that a false spypro virus was found and deleted I got the above error message when starting upwards.  How can I fix?

  Hello

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I lost my disk of windows xp and cannot get the files that I need to fix the errors I receive

  I, m the files that are needed for the missing dll.  I can't launch search, save .or restore where I can get a free copy of windows xp home

  I, m the files that are needed for the missing dll.  I can't launch search, save .or restore where I can get a free copy of windows xp

  Professional

• Rqonom.dll and ssqqnn.dll errors on start up.

  restore points do not resolve this... Please send suggestions for * address email is removed from the privacy *.

  restore points do not resolve this... Please send suggestions to Email removed for privacy

  This can happen if your anti-virus caught a viral infection and removed, but not delete the pointer/registry entry.

  In addition, is not a windows or software of renowned file so I can tell it is a viral infection on your system.

  Just to make sure that all clean, please run a scan using these applications and also analysis full of your anti-virus software:

  Comodo BOClean: Anti - Malware Version 4.27
  http://www.Comodo.com/BOClean/boclean.html
  Get a free PC safety scan
  http://OneCare.live.com/site/en-us/default.htm

  Autoruns to delete the entry from the start up
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  [-] HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun =

  [-] HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run =
  Look in
  the right pane/window and delete the entry for him ( If you use the registry editor or locate on the entry of execution using Autoruns)

  ' c:\windows\System32\ . rqonom.dll ".

  ' c:\windows\System32\ . ssqqnn.dll ".

  Let us know your progress.

  NASS - http://www.nasstec.co.uk

• I need help, fixed an error of update updated 11.0.14 installation. Fatal error during installation.

  I need help for a mistake that I keep trying to do an update. Update is 11.0.14 and the installation error 1603 Fatal error message

  Error 1603: A fatal error occurred during the installation of Adobe Creative Suite

• need to fix "200 error occurred in a plugin; "bwcheck, no direct to connect host to.

  I'm a very ordinary computer user, but have never had the problems I am having with

  Windows 8.  I watched 2 hours of Amazon Prime video and then you had this message

  and, of course, can not upload more.  I would appreciate help.  Thank you.

  Hello

  It is possible that the plugin that was used to watch the vidoes Amazon is corrupt.

  1. what browser do you use for videos from Amazon?

  2. are you referring to downloading videos from Amazon?

  3 are you facing this problem with videos from Amazon?

  Some sites Web uses plugins like Adobe's Flash, Microsoft Silverlight. or QuickTime to watch the videos.

  If you use Internet Explorer, then I suggest you follow this article and see the section "why videos will not play in Internet Explorer?

  http://Windows.Microsoft.com/en-us/Internet-Explorer/videos-Don ' t work #ie = ie-10

  Update your add-ons to Internet Explorer to the latest version of Flash, Silverlight and Java. You need to maybe uninstall and reinstall the Add-ons to make sure that the latest version works properly.

  Last download Flash
  Last download Silverlight
  Last download of Java

  Follow these steps and let us know if it helps. If the problem persists, then please answer, we would be happy to help you.

• Run DLL error Windows 8 on laptops HP 2000

  When starting the laptop of HP 2000 using Windows 8, I get DLL error run there was a problem starting c:\\users\judy\appdata\local\conduit\backgroundcontainer\backgroundcontainer.dll the specified module could not be found.  I installed Norton Security software. I don't know what is this error or how to fix it! Any help would be appreciated! Thank you!

  DLL errors appear when the DLL is damaged, and it gets damaged due to the registry database. When the registry keys concerned is corrupt then it affects the DLL file and so that the error message appears. So to fix this error, you must set the registry key corruption. Apply any registry repair tool and fix DLL errors directly.

• How can I change need to correct some errors

  How can I change my file adobe need to fix some errors

  With a PDF open in Acrobat XI:

  Tools - Editing - Select tool "edit text and Images.

  Keep in mind that the PDF is not a file format of word processing; therefore PDF is intolerant of processing like "change".

  However the retouching characters and strings is possible (which is judaciously).
  Acrobat (especially the Pro version) provides strong tools to retouch.

  Be well...

• How can I fix error FaceHI.dll missing on start up

  How can I fix error FaceHI.dll missing on start up?

  Hello

  If you use a facial recognition software, please reinstall the software and check.

• How can I fix this error - Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  When I click on Windows live Photo Gallery to satart - I get the follwing messge.

  Windows Live Photo Gallery encountered an error loading WLXPhotoLibraryMain.dll and cannot start - error Ox800736b1

  How should I do?

  Hello

  The question you have posted is related to Windows Live Photo gallery and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=20

• Receiver error message: "" Ultra driver would need UM_EMDL. "» "DLL", printer installation.

  Original title: Ultra driver would need UM_EMDL. DLL

  I have a badge printer (ID Pro) and it allows to install the printer whenever I plugged into my computer. Now, I get an error message indicating
  «"Ultra driver would need UM_EMDL."» DLL", I searched all files on my C drive and cannot locate this file.  Don't know why it is missing.

  All the advertised 'free' pilot of fixation and the registry fixing software so far has not proven to be free. Any suggestions?

  Hi LucindaGreene,

  1. What is the exact brand and model of the printer number?

  2 Windows operating system you are using?

  You can try the following steps and check if it helps:

  Method 1:

  Uninstall the printer and reinstall it again.

  Step 1:

  If you use Windows 7, to remove the printer, follow these steps.

  a. open devices and printers, click the Start button, and then click the Start menu, click devices and printers.

  b. right-click on the printer you want to remove, click remove the deviceand then click Yes.

  c. If you cannot delete the printer, right-click again, click Run as administrator, click Remove device, and then click Yes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If you use Windows XP, you can delete the printer from the Device Manager drivers or Add / Remove programs.

  Step 2:

  Follow this link to install the printer.

  Install a printer

  You can also visit the printer manufacturer to download and install the latest version of the printer drivers.

  For Windows Vista, refer to the article:

  Add or remove a printer

  Method 2:

  You can also try running the fix it and check if this may help:

  Printer in Windows problems

• Error trying to copy "system missing or incorrect. Need original Windows DLL WNASPI32. DLL.

  Original title: Bad or missing file

  I get an "incorrect or missing system. DLL

  Need original Windows WNASPI32. DLL

  When I want to copy something. How can I fix it

  Hello

  1. what operating system is installed on the computer?

  2 have you made any changes to the computer before the show?

   

   

  There are several different ways that wnaspi32.dll errors may appear on your computer.

  Wnaspi32.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation. The context of the wnaspi32.dll error is a key piece of information that will be useful while solving the problem. As such, please post the exact error message.

  Run the System File Checker command to replace the copy of the file wnaspi32.dll missing or damaged.

  Reference:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

   

  http://support.Microsoft.com/kb/929833