Bluetooth not available after update of Windows 10

Similar Questions

• HP envy 15 notebook PC: Beats audio not available after update of windows 10

  Hi, I would like to know the characteristic audio Beats that isn't on my laptop anymore, after I've updated for Windows 10 he disappeared and now the audio on the laptop is not the same of course. The quality is worse.

  How can I get it back?

  Thank you

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63408.exe

  When the reinstallation of Chipset has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  When he finished, restart the computer again and let windows to load completely for a few minutes before checking it in.

  Kind regards

  DP - K

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

  Hello

  My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

  I hope you can help.

  Thank you

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• G570 bluetooth not recognized after update to 8.1 windows

  This is a very unusual problem, and I have not found one post on this anywhere!

  First of all my specifications specifications

  Lenovo G570 (reference number: 43345JU)

  i5 - 2410M

  8 GB RAM

  Qualcomm-Atheros AR9285 WLAN

  do not know the brand of bluetooth (for most broadcomm)

  Provided with Win7 Home premium x 64

  The Win7 it came with also had lenovo energy management through which I could toggle the WIFI and bluetooth on and outside. Given that I've never used the bluetooth, I turned it off via Power Mgmt.

  Interestingly, when I was running Win7 I also had this dual boot with Ubuntu. And if my Bluetooth has been disabled through the win7... EM bluetooth wouldn't be recognized in ubuntu and there was no way to turn it back on... I had to start again under win7 and turn it on via EM and start in ubuntu.

  Recently, I updated to Win8.1 but had not put on the bluetooth before doing so. In Win8.1 bluetooth device is not recognized everywhere... no PC settings (metro UI), not even in Device Manager. I tried to install the energy management to 8.1 from the support site, but he was extremely buggy and found no option to activate bluetooth. The old EM has not installed correctly in comaptibilty mode.

  In ubuntu now (dual boot with win8.1) its still the same. Bluetooth not regonised just like before.

  I can't go back to win7 now. There is no correct EM to win8.1. There is no option in the BIOS about bluetooth.

  How can I activate the bluetooth adapter? ANY help is appreciated...

  Hi neokenchi,

  Please help out me. Yes, I had tried to install win7 EM but trotted in compatibility problems. But now started digging through the forums and found a link to EM that works on win 8 and 8.1 of victory. It has even installed the power controller driver virtual lenovo APCI.

  http://driverdl.Lenovo.com.CN/Lenovo/DriverFilesUploadFloder/36900/WIN8_14.EnergyManagement.exe

• Satellite S50T-B950 - touchpad does not work after update of Windows 10

  Hello "Toshiba."

  After the update for Windows 10 I have a problem with the touchpad does not work and became come boiling Forum and found that the solution is to uninstall "MOMENTUM Input Device" to "Device Manager", finally worked the touchpad, but alas multi touch properties such as: "zoom/minimize gestures of scrolling and two-finger" no longer work

  Please help me solve this company of Toshiba problem

  The same theme has been already discussed and resolved in this thread:
  https://Forum.Toshiba.EU/showthread.php?83885

  Then please follow the proceedings in the other thread to avoid misunderstandings

  by the way: here is the link to pilot site Toshiba win 10:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• J9L60PA: No Audio beats available after update of WINDOWS 10

  No handler found when audio beats or app I've upgraded to Windows 10... rather have download realtek hd audio that offers bad sound... my laptop comes with beats audio speakers... where should I get my beats back audio Panel... Please help

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP laptop and your Beats Audio does not work properly after upgrading to Windows 10. Here is a link to help solve the speakers and sound does not work correctly.

  The link by using the Windows troubleshooting tool is the best for this situation.

  You can also try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on the speakers.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default Format menu drop-down of the highest quality 192000 Hz.
  7. click on apply. Reboot the laptop.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  If that's not enough to uninstall the Realtek HD Audio and other that are listed in Device Manager, click the arrow next to its video and controller to expand this category games
  Click on it Audio IDT high definition (HD), and then select Update driver software.
  Select search automatically for updated driver software.

  The laptop must find and automatically install the updated driver.
  Once the installation is complete, restart your laptop.

  I hope this helps.

  Thank you.

• Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

  Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

  However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

  How can I reactivate fingerprint logon?

  Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

  The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)

• ScanJet 4890: Scanjet 4890 software does not work after update of Windows 10

  After a few updates for Windows 10 Solutions Center software starts to open and close. It was working fine the week of December 13, 2015 with windows 10. Tried to reinstall and HP according to procedure but no luck. Is there a solution?

  ELP

  Hello

  Thank you for using the forum.

  Try this solution:

  > Enter "View installed updates" in the search bar of Windows. It will show you an option in Control Panel.

  > Click on the indicated option.

  > Select the "Security Update for Microsoft Windows (KB3132372)" and an uninstall option will appear next to the drop-down list to organize.

  > Click on Uninstall and work through all prompts.

  > Once uninstalled, I hope your problem will be solved.

  Take note of this notice from Microsoft:

  Summary

  Microsoft has published a notice of security for it professionals about vulnerabilities in Adobe Flash Player in the following web browsers:

  • Internet Explorer in Windows 8, Windows Server 2012, 8.1 to Windows, Windows Server R2 2012, 10 Windows and Windows 10 version 1511
  • Edge Microsoft Windows 10 and Windows 10 version 1511

  https://support.Microsoft.com/en-us/KB/3132372

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Multifunction LaserJet 1536dnf printers: HP Toolbox does not work after update of Windows 10

  My HP Toolbox worked very well and I was getting a fax to my computer until about a week ago. After the last update of Windows 10, HP Toolbox does not start little matter what I do. I tried to run as an administrator and tried to start through the command prompt, but nothing helped. I want to be able to receive faxes on my computer, but I don't know how I can do without the work of the box HP Toolbox. I uninstalled and reinstalled several times using the latest version of the software on the HP site and tried to install it with the original disc supplied with the printer but nothing seems to work. Toolbox HP will install, however, it won't work. I tried the diagnostic tools and I tried to run it in compatibility mode, but nothing seems to work. Someone please help.

  Hi @Alphas,

  Thanks for getting back to me.

  There is corruption on the computer.

  Try the following steps:

  • Cleaning disc in Windows 10
  • Perform the clean boot in Windows 10 / 8 / 7
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  If the problem persists: please create a new administrator account and reinstall the software.

  • Load the HP utility?

  NOTE: Windows 10 user accounts:  

  standard user (Users) - the standard account is a limited user unelevated account which can be a local account or a Microsoft account. It can help protect your computer by preventing users from making changes to the system that affects everyone who uses the computer. When you are connected to Windows with a standard account, you can do almost everything you can do with an administrator account, but if a standard user tries to do something that requires high rights (ex: run as administrator), Windows will display a UAC prompt for the standard user to enter the password to an account administrator for approval and confirmation before allowing the action.

  administrator user - is an administrator account unelevated which is created by default during installation of Windows, or is already set up for you on an OEM (ex: Dell) computer. This account can be a local account or a Microsoft account. An administrator account has full access to the computer and can make changes. If a user administrator is trying to do something that requires high rights (ex: run as administrator), Windows will display aUACprompt for the user administrator approval before authorizing the action.

  Built-in 'Administrator' - the hidden built-in high "Administrator account" is a local account that has unlimited access to the PC. By default, the 'Administrator' account is not invited by the UAC. Everything that's running while it is connected to the 'Administrator' account also will have full unrestricted access to the computer, so it is not recommended to use the built-in for daily use "Administrator" account. It is recommended to use only the account 'Administrator' integrated as necessary instead.

  Otherwise I would be 'restore from a system restore point' to the help of this guide, options recovery in Windows 10 or contact the HP support by phone.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the results. I can't wait to hear strings attached good luck!

• OfficeJet 4500 G510g: software HP does not work after update recent Windows 8.1

  It is one of the three HP OfficeJet printers, which essentially has the same problem.

  This printer has been in service under window 8 and 8.1 of Windows (and before that, with Windows 7 and Windows XP) and fully functional (even if I only used print and scan with this printer), it is connected by Ethernet to my local network.

  After the recent updates of my system (I've enabled Windows update to automatically install all Important and recommended updates) the HP Solution Center are more recognized this printer.  My first action was to remove the device (using the control panel:connected and printers) and then attempted to add a printer.  Windows adds that a printer has failed.

  My second attempt was trying to add a device.  While that * fact * seem to succeed, the specific printer icon has been replaced by a generic printer icon and control panel:Director something did * not * show the printer in the list of devices!  She has shown a print to the printer queue, however.  HP Solution Center did not always recognize the printer.

  For my third attempt, I went to the HP support site and downloaded all of the following: OJ_AIO_4500_G510g-m_Full_Win_WW_140_408, printing HP and doctor Scan, the diagnosis of HP network and user HP printer Installation Wizard.  Using the full installation package, I uninstalled just the specific printer software first (leaving the solutions, digital imaging and other software in place - they are all used by my other printers as well) then tried to reinstall all the software installation package specific printer could not conclude, as he could not find the printer on my local network!

  Then I ran the Diagnostics of network user and found the 4500 (and a 6000, but not my 6300!  I had not yet done any changes to the installation of the 6300!)  The recommended action is to download the full installation package and run it.  Even if I had downloaded manually, I leave Network Diagnostics continue - download failed before finishing.

  Then I tried printing and Scan Doctor, who took nearly three minutes to tell me that the 4500 was not connected to my network.

  I then used the web server integrated for the printer by opening a browser directly session by its IP address.  The printer is online and processed as expected, but Windows still does bllind to it.

  I then tried installing printer Assistant, but she missed like printing and Scan of the doctor.

  Frustrated, I have re-directed the full installer, but this time after selecting the uninstall, I let him remove all HP software, knowing that I would then need to reinstall all three printers.  I downloaded the full package for my OfficeJet 6310xi and my OfficeJet 6000 - E609a (after checking that all three were supported by HP for use under Windows 8 and 8.1)

  Then I started the resettlement for all three printers procedure, starting with the 6300.  This facility has failed after leaving an Add-a-device shortcut on the desktop.  I tried to use the shortcut to add the printer, but he did not better than my first attempt

  Then I tried with the 4500 and 6000.  Even failure for each of them.

  I uninstalled all three printers, but became suspicious of something else than an obsolete installation package (even if I had downloaded the latest versions on the HP support site!)

  I made one more attempt to install the 4500 - after uninstalling just - and this time he only gave me the option of installing additional software!  Something had clearly been left (probably in the registry) the installation program takes to mean the printer was already installed!  So I canceled the installation attempt and decided to look a little deeper for the remains of pieces of attempts and prinior facilities.

  A search with the found registry editor a few each printer detritus left behind in the registry and search for foud Program Files, a large number of files related to the printers.  I was quite impressed by for each printer uninstall programs!

  In particular, in the SYSTEM ROOT and sections registry have been entered for the Olympic GAMES of 4500 and 6000 JO under the subsections MULTIFUNCTION.  Even administrators system to a Windows system cannot usually change permissions to delete these entries, I left those alone, but I wonder if this is what prevents the installation program to install the printing software.

  It is not only the installation and HP software support which is defective after the recent updates of Windows.  Such widely used and stable programs like Firefox, Thunderbird, and even Windows Explorer has been updated unexplainable in their behavior.

  I am desperate to get my printers fully functional again!  I strongly suspect a compatibility issue, but I really need advice here!

  -Barr

  Thanks again for this detailed information. If you feel my post has solved your problem, could you mark accept as a solution, because it will help others find the solution. Thank you.

• My headset does not work after update of Windows 8

  His problems-Windows 8

  I just brought a new laptop running windows 7 with the free update of windows 8. I've now updated to windows 8, but my headset does not work, any help?

  Hello
  I have another effective solution

  For laptop plug in the battery and the power, then press power 5 times.
  After the plugin power only and test the plug with headset

  For Pc connect power and then press power 5 times.
  After this plugin power and taking test headphones

• Envy 15: Airplane Mode button does not work after update of Windows 10

  My airplane on my HP envy mode button will not work after the upgrade to Windows 8.1 for Windows 10. I can turn on and off airplane Mode but not the button. Grateful for the help

  Hello:

  The only suggestion I can offer would be to see if installing the W10 wireless button driver solves the problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_150986_1&swEnvOid=4192

• Pavilion dv6: fingerprint reader not working after update to Windows 10

  Hello

  Recently, after the update to Windows 10 fingerprint reader works just on my Pavilion dv6. I tried other methods I found on the forum, and I'm looking for a driver get the fingerprinter reader to work. I tried to download HP SimplePass (which has been removed from my PC by updating the operating system) in the hope he would get my fingerprint reader to work, but no luck.  I also looked in the settings (in Device Manager) for biomeric devices, and I found a driver with an exclamation point, indicating it wouldn't work. So, right now, I need a solution to get my to work on a fingerprint reader.

  Thank you

  Nathalie

  Hello @Nikil1503,

  I don't know that if you follow exactly the documents there will be no problems. It will be a good learning experience!

  After the return to let me and the community to know how it goes.

  You're welcome, have a great day!

• HP Pavilion p6780uk: my hp Photosmart C4180 all-in-one will not scan after update to Windows 10

  Not sure if Windows (32-bit or 64-bit) 10

  Welcome to the community of HP, @DavidJ70

  I came across your post about how you are unable to analyze after upgrade to Windows 10 and wanted to answer with my suggestions.

  First run Installation Wizard printer here: use of diagnosis HP for printers HP Windows tools

  After that, the feature complete driver and software must be installed for your printer on your computer. Try to scan the image. If there are problems, let me know all the details, errors, etc., and I'll do my best to help!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Best wishes