RT warning flag target CompactRIO

Similar Questions

• remove the pop up message "Waiting for in time real (target CompactRIO RT) to answer.

  Is there a way to remove the pop-up message "Waiting for in time real (target CompactRIO RT) to answer" what power is removed the cRIO or when the network cable is disconnected?

  Hey Danny,

  How did send you the commands to the Windows PC the cRIO? You use the remote FPGA host Interface?

  I've seen the pop-up dialog box when the LabVIEW project is not present.

  If you create a Windows VI that sends orders via shared variables or other network mechanism to a VI RT, which in turn controls your FPGA VI, then you should not ever see the popup you speak.

  This tutorial walks through creating an example of monitoring on cRIO with three screws as indicated:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11199#toc4

  This tutorial is an example of the use of a shared variable to implement a heartbeat, to determine if the cRIO is connected:

  http://decibel.NI.com/content/docs/doc-11046

  I hope this helps.

• "WARNING: illegal character in the string literal encoding.

  I'm under CVI 2015, v15 (408).

  On some old projects in which I put characters ASCII extended in the chain controls, I now get warnings above.  Any idea where I can calm down some of these warnings?

  Hello

  Clang should tell you its warning flag [- Winvalid - source-encoding] you can activate disabled as described here. (this is the eleventh entry in the list)

• PiPL version mismatch warning and code

  Hey, I was hoping that someone could help me understand the PiPL versions.  I had some problems with a warning flag when I apply my plugin in sequels, getting a warning flag that says:

  "effect a version mismatch.  "The code version is 2.0 and PiPL version 2.0 (108600) (25: 16).

  It is a pretty useless message as 2.0 is 2.0.

  I found that I can get the error to go away if I dutifully replicate the header and versioning pipl found on the adobe sdk examples, but it's kind of annoying and I would like to understand better.

  To load without error, my PiPL resource looks like this:

  AE_PiPL_Version {2, 0},

  AE_Effect_Version {1048577} / * 2.0 * /.

  and my plugin header looks like this:

  MAJOR_VERSION #define 2

  #define MINOR_VERSION 0

  #define BUG_VERSION 0

  #define STAGE_VERSION PF_Stage_DEVELOP

  BUILD_VERSION #define 1

  I guess the version 'code' means the warning is a concatenation of the major and minor versions, and it seems the version "PiPL" says the warning comes from AE_Effect_Version (1048577) and NOT AE_PiPL_Version (2.0).

  If I change THE values in the plugin header (not just major/minor versions), I get the warning.  So I suspect that the number of AE_Effect_Version is a sort of a hash of all the version information (major, minor, bug, scene, build versions), and the warning is a bit misleading.

  Can someone explain more about this number, 1048577?  Is this some sort of hex value?  Thank you!

  When I started to try to understand the versions in the PiPL it was my ass, so here are my notes on how to understand the version number of the of the effect:

  RESOURCE_VERSION =

  MAJOR_VERSION * 524288 +.

  MINOR_VERSION * 32768 +.

  BUG_VERSION * 2048 +.

  STAGE_VERSION * 512 +.

  BUILD_VERSION

  So, for your installation of

  MAJOR_VERSION #define 2

  #define MINOR_VERSION 0

  #define BUG_VERSION 0

  #define STAGE_VERSION PF_Stage_DEVELOP / / this is a 0 to the enum in AE_Effect.h

  BUILD_VERSION #define 1

  It would be:

  RESOURCE_VERSION =

  2 * 524288 +.

  0 * 32768 +.

  0 * 2048 +.

  0 * 512 +.

  1

  That would be yierd you: 1048577

  So, it would be:

  {AE_Effect_Version}

  1048577

  }

  I hope this helps

• Alert target Version does not support

  

  I have a form which should work with Acrobat Adobe Version 8 and higher.  My version of the target is set at 8.0 and later.

  I have two warning messages: target version does not support the validationState event and target version does not support the postSubmit event.

  When I first open the because I get the error message of the screenshot above.  When you look at events with scripts there not a script associated with both of these.  The error is associtaed with the 6 key, but I have a script for when you click to add instances.

  Is there anyway to remove these elements that give the error?  And is there a way to go to the line 9419?

  Thank you

  You can send the form to [email protected] and I'll have a look when I get the chance.

  Paul

• Minimum requirements of the exporter?

  Hello
  I'm trying a compiler plugin (which has been targeted for CS3) to the new interface of exporter of port...

  Previously, I described my plugin development compInfoRec @startup-> compilesVideo and compilesAudio to false (since my plugin product statistics)...

  Now, as a first step of Portage, I want to get an implementation of the exporter ' do-nothing ' and later to implement the setting and effective export.

  By providing a
  -exExporterInfoRec-> canExportVideo and canExportAudio false @startup,

  -making fun of the strings on the enlargement of the scope and the summaries of the query

  -simulated on request to output bitrate

  The plugin simply blocks the Media Encoder for no apparent reason

  By also providing "parameters" (by copy - paste of some parts of the onGenerateDefaultParams and onPostProcessParams of the sample file SDK) I'm able to reach the encoder definition dialogue
  (withou preview, because the video is turned off and with these unnecessary params)
  but when I run the queue that the Media Encoder does not immediately by scoring the task with the yellow warning flag.
  and the debugger never reached the onExport Manager

  So my question is:
  -is allowed to have an exporter who exports not of video and audio, or?

  -Are there any other requirement that all exporting must meet?

  Thank you very mutch for your attention

  It seems that you need to set at least one of the two indicators (canExportVideo or canExportAudio) to true.  You can set canExportVideo to true, but still that expose the settings you need and switch to using the sequence of rendering Suite to remind to video images.  You export markers?

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• can not access my 2 phones from verizon on PC by uploading photo.

  I have a 2 year, HP pavilion slimline computer desk, model # is S5-1224. I improved our Verizon phones recently and told me that the USB cord for the charger could also enter the PC to d/l images. Cool I thought, but it does not work. I'm working my way to my list of USB, and there is a yellow warning triangle with! mark in it. When checking more, it says "device is not available, code 10." I did a google on it and found that the USB driver is likely bad. I've updated until I'm blue in the face and it still shows the driver in 2006! but the construction date is 9-2012! How this can be.

  Anyway, I went to HP and they linked to some "test site" that said, I had 16 drivers 'old or ancient' and of course wanted $29.95 to "solve" the problem. Can't believe that HP has no updated driver but outsources for money. Anyway, when I pull the usb cord, the yellow triangle disappears. I plug my phone 2 days years wifes, Panel yellow returns! Be very sick of this problem. All I want to do is d/l my pictures from my camera to my pc. Does anyone know of a difficulty which only costs $29.95? Just don't have it right now.

  Thank you.

  Mark in Phoenix

  Well, another day has come and gone and I could write for another hour, but won't. Really wish I knew I talked on the phone yesterday at HP. What I ended up doing was moving the USB cable to the BACK of my HP POS computer and guess what? Yep, the USB in my device manager warning flag came out and the LG CDMA USB Modem icon presented in the section "other devices." I finished then setting all the other stuff then got a popup from Verizon saying that LG had an update available for the phone, so I jumped on it. So even if pillar 2 USB front still does not recognize my phone, those back do. Sorry, I mean no one tech on the phone could at least tell people to give it a try when they know that no one is broken, like just about everyone out there the pinhead is perhaps.

  In any case, support of HP, nice work, trying to sell your plan of $227 'service', but rather all do you this, we have P * sing off the coast of what was a loyal user of HP. No more HP for me. Products are so-so at best, and the "customer service" lives up to its name.

  BTW, I'll add this to my Moose to Meg Whitman email I sent yesterday, and which included a copy full of my post above. I hope that you have a good day well!

  Mark in Phoenix

• Bluetooth is not working properly on Tecra M9

  I have a problem, try to use my Bluetooth on Toshiba Tecra
  Laptop of M9.
  When I go into the Panel "Bluetooth devices" does not appear on the list. The only reference to Bluetooth is "Bluetooth Com".

  If I double click on the Bluetooth in the Systray icon, I can't open a Bluetooth device. I get a warning flag saying "Bluetooth is not ready."

  The problem is that I can not turn 'on' bluetooth on your laptop (even after you enable the wireless switch on the front of the laptop).

  The "Bluetooth devices" icon in the control panel is missing.

  All ideas
  Thanks in advance...

  Install the battery last Bluetooth and start "Bluetooth settings" of the folder program "Toshiba-> Bluetooth.

• Compilation of CVI2013

  Hello

  I'm still discovering all these exciting features of CVI2013, so here I am with two issues related to the compilation:

  (1) on the compilation Options / Configuration Options Panel, the check box 'Show indicators of warning in the window output to build' doesn't seem to have an effect: in both cases, I get the warning messages (warning level set to Custom). What is a warning flag?

  (2) the announcement of the new Albums of CVI2013 claims to build faster. My impression is that now, with the help of CVI2013 in debug mode, take it same code about 5 times longer to compile. Unfortunately I did not measure the compile time before the upgrade, so it's an indicative value only. Is there a setting I have forgotten?

  Thank you!

  Hi Wolfgang,.

  Thank you for the project. I confirm that we must, as you said, about 5 times more time to compile with CVI 2013. I don't have a reason for you at the moment, but I created a bug (#422103) report to study soon.

  Luis

• Lack of Service SM BIOS driver?

  You seem to be missing the driver of service SM BIOS...

  I thought it was part of the driver chipset but installing it didn't solve it. I have run the utility was updated and that does ' t get the driver to make it.

  Any ideas guys?

  Link to photo

  The warning flag does not mean that it is not installed it is. But it does not properly. I might be a missing service or not started but generally its share of the chipset driver for the model.

  I'm guessing it's from a media installation not OEM.

• Speech recognition Profile Import Export problem

  I have problems to import a profile that I put in place.  I'm upgrading my hard drives often, so I'm always import and export of different profiles.  I have run the little program "Speech Profile Manager" and I export my profile (by default and only one), but when I go on the new computer, same version of vista and everything, I get huge errors and it does not matter.  This is how it goes down:

  I have not a single program open, just after a clean boot:

  1. I run the speech profile manager

  2. I click on "Import", I find the file to import and say OPEN.

  3. it is said so "do you wish the profile imported by default?"  I click Yes

  Image here: http://tagr.org/images/Default_Profile.jpg

  4. He said to them 'the microphone settings must be granted before use... You want to now? "I click Yes.

  Speech at startup and then switch to sleep mode and that this error pops up:

  WARNING: Engine target () of the profile is not available.

  Profile data has been imported, but won't work for the missing engine.  If you install the engine at a later date, please fun the microphone Wizard.

  And then 1 million errors is the first:

  "ERROR: cannot create (Files\1033\L1033.tpc) key in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/Yes_To_Mic_Wizard.jpg

  If I say no the Microphone Wizard, I get an another huge list of errors, but a different number:

  "ERROR: cannot create the key (Files\TrainingAudio-0409-10C902C1-A71A1D60) in the registry." Please make sure that the speech is installed and that no programs that use speech (for example) are open, and then try again.

  Image here: http://tagr.org/images/No_To_Mic_Wizard.jpg

  I don't even have office on this computer.  Profile is certainly not the profile, I spent months tweaking. It's a blank profile.

  I tried Yes and no on each option, micro USB plugged out, jack mic 1/8 '' plugged in, I tired it work on 3 different Installations of Vista. I tried to re - export profile several times. I get a similar set of mistakes every time.

  Help!

  The software that you are using was built in fact older versions of Windows and is not listed as compatible with Windows Vista. I apologize because I was under the impression that you imported files to an old Windows XP system running the Tablet PC edition or Office 2003 because the error indicating "target engine () of the profile is not available." and the use of the older tool. Resource: speech recognition Profile Manager tool

  Speech recognition Profile Manager tool is now obsolete, because vocal training files can now be migrated using the Easy Transfer Wizard. The wizard is available for Windows XP via download and integrated in all Installations of Windows Vista.

  To transfer voice (including the training files) user profile settings, please perform the following steps:

  -Click on the ORB start and type EASY in the search bar, click Windows Easy Transfer icon that appears - this will launch the wizard:

  

  -Click Next - select start a new transfer
  -Choose my old computer
  -Choose to use a CD, DVD, or other removable media (even to memorize the settings on the local hard disk)
  -Select the external hard drive or to a network location (even memorize settings on the local hard disk)

  

  -Under Choose a network location, you can use the parameter to copy the files to your local hard drive by default:

  

  -Choose any user account or my user account
  -If you make a transfer from one account to another on the same computer or on a single account on another computer, then you choose the my account of yser option

  -Choose advanced options will give you the choice to transfer only specific items in your account
  -You can use this for example to transfer only files sounds and speech recognition and clear all other check boxes
  -Once your choice, click on the wizard checks to see what items are able to transfer
  -At this point, you will notice that all the items that are selected to be transferred, by default all data application, Documents, items of office and preferences, Internet Explorer, and Windows settings are selected whose sounds and speech recognition:

  
   
  -Here you can choose again customize to select specific items you would like to be transferred after clicking on the transfer of your objects will be stored at the selected location

  -To import all items to another profile on the same computer or on another computer, you will need to re-run the wizard and select a current transfer and a new computer, and then point to the location of the files previously exported.

• External hard drive Western Digital

  I have a Western Digital external hard drive, WD CAviar WD1200BB... it worked great except every now and then Windows would not recognize it.  This is easily fixed by unplugging the USB cable, wait a few seconds and then it reconnect.  Recently, my computer got stop without going through the process to good close.  Since then, Windows does not recognize the hard drive.  I went into Device Manager and there was a warning attached hard disk.  I uninstalled the drive and then installed again, however, now Windows indicates that the drivers are corrupt and it is impossible to install.  Western Digital said they use common drivers normally installed in Windows and I'm contact Windows to solve the problem.  What should I do because there is no update that my computer is telling me that I can install?

  Disconnect the hard drive and then go back into Device Manager. See if there's a warning flag in the list of universal Bus controllers. If so, remove the driver. Reboot and it re-charge the driver. Then reconnect the hard drive.

• Bitmap image does not appear

  I am new to thisand I'm not sure what I did wrong, I filled the front below and picture appeared in the Simulator now, it will not... There are no errors of ar showing warning flag

  public

  Image bitmap logoBitmap = Bitmap.getBitmapResource ("res/bitmap bottles_logo.png");

  bitmapField = new BitmapField (logoBitmap, Field.FIELD_HCENTER);

  Add (bitmapField);

  Can someone tell me what I did

  Thanks in advance

  Hey

  I think that you don't need to specify your folder name in which your image is that you can directly type the name of your image.

  Try this Bitmap logoBitmap = Bitmap.getBitmapResource ("bitmap bottles_logo.png");

• The MRP process automatically standby DB

  Hi DBAs,

  During an audit, I discovered that one of the preproduction that DB has diminished. After checking the logs could not find something that made the DB down.

  So I started the DB primary and after who wanted to recover the day before DB.

  Here's what I did:

  Following error occurs in file preprodDB alerts log and process MRP0 stops automatically and the recovery does not:

  After starting the day before DB as a result of orders:

  SQL > bootable media.

  ORACLE instance started.

  System Global area 1.0689E + 11 bytes

  Bytes of size 2240984 fixed

  Size variable 1.0657E + 11 bytes

  268435456 buffers of data bytes

  Redo buffers 55267328 bytes

  Mounted database.

  SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE to the CURRENT HELP LOGFILE DISCONNECT FROM the SESSION.

  Database altered.

  After that, I saw the alert logs and found DB automatically cancels the recovery with the rest of the error logs:

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CURRENT LOGFILE USING DISCONNECT FROM THE SESSION

  Try to start the standby recovery process thoroughly managed (preprodDB)

  Sea 12 Nov 11:38:52 2014

  MRP0 started with pid = 33, OS id = 124345

  MRP0: Background managed intelligence process started (preprodDB)

  has started the process of logmerger

  Sea 12 Nov 11:38:57 2014

  Managed Standby recovery to apply in real time

  WARNING: Recovery target destination is in a branch of the siblings

  the controlfile checkpoint. Recovery will recover only

  changes to the data files.

  1 data file (ckpscn 12017964846227) is an orphan on incarnation #= 2

  MRP0: Found orphaned data files!

  Recovery will be retried after the flashback possibly...

  Errors in the /u01/app/oracle/diag/rdbms/preprodDB/preprodDB/trace/preprodDB_pr00_124347.trc file:

  ORA-19909: datafile 1 belongs to an orphan incarnation

  ORA-01110: data file 1: ' / u02/app/oracle/DATA/preprodDRDB/preprodDB/system01.dbf'

  Managed Standby recovery not using real time applies

  Slave dating exception ORA-19909

  Errors in the /u01/app/oracle/diag/rdbms/preprodDB/preprodDB/trace/preprodDB_pr00_124347.trc file:

  ORA-19909: datafile 1 belongs to an orphan incarnation

  ORA-01110: data file 1: ' / u02/app/oracle/DATA/preprodDRDB/preprodDB/system01.dbf'

  Recovery slave PR00 previously dated exception 19909

  Completed: ALTER DATABASE base_de_donnees RECOVER MANAGED STANDBY using the JOURNAL CURRENT DISCONNECT FROM the SESSION file

  Wed Nov 12 11:39:17 2014

  MRP0: Stopping the process background Media Recovery (preprodDB)

  Sea 12 Nov 11:42:05 2014

  Using the default for the STANDBY_ARCHIVE_DEST as USE_DB_RECOVERY_FILE_DEST parameter value

  ALTER SYSTEM SET log_archive_dest_state_2 = "DEFER" SCOPE = MΘMOIRE;

  Sea 12 Nov 11:42:30 2014

  ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL

  ORA-16136 marked during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL...

  Please help synchronize with primary DB.

  Kind regards

  Ritz

  Hello

  One of the causes of incompatibility of the incarnation may be the activation of the day before. Please make sure you that your database pending is in mode ensures to some database_role of V$ database;

  Second, the incarnation reset dose not require the archives to apply. However, you must ensure that there is no space archive doesn't exist. Since transport archives of primary db then all archives must come from incarnation 2 in standby mode.

  Kind regards