Tecra A11 - 1EJ - a more detailed help specifications

Similar Questions

• Tecra A11-125 - technical specification on the integrated chip

  Hello

  Where can I find more info for the Tecra A11-125? Specifically, I need to know the SATA standard for the chip: is Sata150 and Sata300?

  Thank you

  Oliver

  Hello

  I found an article on this laptop:

  http://www.notebookcheck.com/test-Toshiba-Tecra-A11-125-notebook.28130.0.html

  According to her, it is equipped with motherboard Intel HM55

  http://www.Intel.com/products/Notebook/chipsets/HM55/HM55-overview.htm

• FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  FaceTime will not open on my Macbook pro (el capitan).  Message: "FaceTime close unexpectedly.  Click Reopen to reopen the application. Click report to display more detailed information and send a report to Apple. "Please help me.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Had sent the message about the Blue error screen. Has been asked for more details. I hope this helps.

  Had sent the message about the Blue error screen.

  Has been asked for more details.

  I hope this helps.

  BCCode: 10000050 BCP1: FFFDF6F4 BCP2: 00000001

  BCP3: BF90DB41 BCP4: 00000000

  OSVer: 5_1_2600 SP: 3_0 product: 768_1

  Hi VASANTHFERNANDES,

  ·         You did changes to the computer before the show?

  ·         When exactly you receive the blue screen error?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Disconnect all external devices and check if the problem persists.

  Method 2: Start the computer in last known good configuration and check.

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  Method 3: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 4: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  Demystifying the 'Blue Screen of Death'

  http://TechNet.Microsoft.com/en-us/library/cc750081.aspx

• Tecra A11 - problems of the more recent/video BIOS

  Hi all

  I just got a Toshiba Tecra A11 the other day which is out of warranty (Refurb). When I got the laptop there is a problem where the photo was displayed at 1024 x 768 and biased (in BIOS). Image 1-2cm off the screen to the left, with over the space of 5-6 cm black to the right of the picture, the low 2-3 cm of the image were also the bottom of the screen.

  I installed Ubuntu Studio initially and attempted to force the display to a wide screen resolution. I didn't have a chance, I also installed Win7, but still with the latest drivers, I had no chance.

  It was strange because the BIOS was displayed in the same way, so, naturally, I decided to upgrade to the latest version of the BIOS. The BIOS of the laptop is quite old (end of 2009).
  I downloaded the update to the BIOS of Toshiba web site and ran the update.

  The new BIOS has been installed and rebooted the machine.
  However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  My question is: what can I do to fix this? Is a tool of recovery or down to BIOS available? Is it possible to reflash the bios? What is recommended?

  Thank you.

  > The new BIOS has been installed and rebooted the machine.
  > However there was no image displayed on the LCD screen, windows startup has done successfully, if I connect to an external monitor to the laptop I brush. When starting the laptop backlight LCD lights.

  This means that everything is ok with the external monitor?
  You can access the BIOS by pressing F2 and you can set it to the default settings?

  Usually, you can switch between the external and internal view using the FN + F5 key combination. It work?

• Tecra A11 - LED backlight problem

  I have great pain in my eyes after a day of working with Tecra A11 BIOS V1.7 = BIOS update. Wenn I bought it there was 1.4 BIOS the same problem with the eyes, LED backlight killing my eyes, a lot of pain after a day's work. V1.5 and 1.6 are much better (no pain) but new BIOS 1.7 is the same eye-killer than 1.4.

  Who will help me? Users of this forum?

  I want the people of Toshiba to help me, they sell the product ready 1/2, absolutely bad work! No contacts to Toshiba just this forum. Toshiba is interested in my problem with its Tecra A11 laptop bad and stupid BIOS updates? I'm really angry, never had such problems with laptop so much. So excuse my emoutions that I'm starting to hate Toshiba for the very bad experience with this Tecra A11. Why some users of this forum should help me? I paid a lot of money to Toshiba, so I want that people of the Toshiba to tell me what they do in their BIOS updates, silly kill my eyes with LCD backlighting. How many BIOS updates will be needed to make the Tecra A11 work correctly for 800 EUROS? I'll never buy anything from Toshiba.

  Hi dusanpov,

  First of all: cool! Nobody is perfect and that these things can happen that something does not work correctly.

  I put t know what problems you have with LED backlight, but a more detailed description would be nice. A friend of me also uses the Tecra A11 but it didn t tell me questions so I think this laptop works very well.

  And I think that it of normal that there is no contact with Toshiba and you won't get any help from Toshiba because you will need to contact a * authorized service provider *. If you have a problem with your laptop, connect with these guys here. They can repair the laptop and it's free if your laptop is under warranty. On the Toshiba site, you can find a list of them.
  Check this box!

  Finally, and especially if you have noticed that with an older version of BIOS, that everything works correctly, you can get this older version of a service as well. As you can see, it might be useful to communicate with these guys here.

  If you have any other questions, just after again! :)

• Tecra A11 - 11: BSOD when plugging in USB devices

  Help. We have several laptop Tecra A11 - 11 to different schools * ALL * with the same problems.

  When the laptop is up and running if a USB device is plugged into one of the USB ports the laptop flashes a very quick BSOD and dies. What is more remarkable with interactive whiteboard USB connection. If that is connected when the laptop is turned on the swift BSOD happens 9 out of 10 times.

  Laptops are downgraded to XP Pro using the Toshiba DVD downgrade. They run on a Server 2003 domain.

  I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request. No difference. I was told last week she was refitted and I would soon hear. I called today a week later and wsa said she had not yet been raised.

  We bought these thinking they were large laptops with a lot of future proofing not much good if they are not fit for purpose. Children are missing out on an education smoothly through these problems that Toshiba do not treat.

  In addition to this when a non admin user screen resolution of trhe grave at 800 x 600. With the help of a utility shortcut Toshiba Zoom view (Fn + SPACEBAR) you can switch this back as an interim solution, but it is still pending as a flaw.

  Any help is greatly appreciated. Many teachers and many children you will be grateful too.

  Hello

  It's a little difficult to say what are the causes of BSOD.

  > I have updated the BIOS twice now on each of them for the latest BIOS. Also updated the graphics driver supporting the Toshiba last request.

  Have you tried a utility chipset?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Find your model and install

• Tecra A11 - 005 00K for SCCM OSD mass storage driver

  I need to know the Tecra A11 mass storage driver so that I can laydown XP WIM of images using the SCCM task sequence. Well, any help would be appeciated.

  I tried the driver Intel ESB2 SATA AHCI Controller but need the correct model in the pilot. (IE. Intel ICH7R/DH SATA AHCI Controller)

  Thank you

  You can get the provider and the device for me id?

  You can get this by going to your device manager, the device in question, right-click, select Properties, click details and select the hardware ID from the drop-down...

  copy beyond what is inside of her and post here and I'll see what I can do...

• Re: Memory video Tecra A11 - 10 d

  Hi all

  I have a Tecra A11 - 10 d and in windows it show that my graphics card uses the 1200 MB of RAM as shared video memory. I didn't need as much memory for my graphics card, I think 256 MB is enough tacking into account that the onboard card has 64 MB of memory dedicated video.

  Now, on all computers, I know that in the bios, there is an option to set the RAM to the video card, but I don't see this option in the BIOS of my computer. I think / hope that an updated bios gives me this option. On the drivers download section I see a new BIOS, but I don't want to flash until I see the BIOS updated specifications.

  Can someone point me to such a document?
  Has anyone had this problem and resolved?

  Thank you
  Dan.

  Hello

  as I know, the video card will automatically if capture the amount allocated portable RAM. I doubt that you can make adjustments yourself. In the Bios of the Pc desktop, you can do as there is an option for the allocation of memory video card. Reflash the bios will not help you.

• Tecra A11 for PA3508E-PRP1 (Express Port Replicator)?

  The Express Port Replicator PA3508E PRP1 can be used with Tecra A11? Given all that I have read the answer would be no, or Advanced Port Replicator or Express Port Replicator II would be necessary. But the port replicators are very similar on the upper side (connectors). Perhaps it is an old item that no one it lists as compatible more precisely?

  is that you must use compatible devices only with laptop Tecra yout and according to specification for your Tecra A11, you can use Express Port Replicator II with PA3680E-1PRP part number.

  This port replicator is designed for latest Tecra and Portege laptop models.

• Need recovery disk or recovery for my Tecra A11 image

  I have a Toshiba Tecra A11 and had a problem with the operating system, so a friend offered to fix it for me, when he said fix what it meant try and install completely wrong Windows 7, but at the same time destroy the removal of the partition, all built in Windows 7 pro installation.

  So now I need a file or a CD specific boot to a USB key. Anyone know where I can get one or download one without having to pay 35 quid for a new Toshiba?

  Thank you
  Tom

  Recovery file cannot be downloaded. Toshiba offer as only recovery disk. Download an iso file won't help you much because you will not be able to start the recovery image installation.

  Either you find someone who has the same Tecra and use its disk or you must order one on https://backupmedia.toshiba.eu/landing.aspx

• My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32bits

  My Tecra A11 - 11K new comes with w7-64 bit, but I need w7 32-bit because of an old program that I use for professional use.

  I bougth a w7 32 and 64 b license.

  My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  But I want to preserve utilities Toshiba, other programs that come with the w7-64 pre-installed. Where can I get them? The Toshiba Download Center?
  And which one I need? All the?

  Thank you for your help.

  > My question is how to install w7-32 more than 64. I think that it is as easy as plug-and - go CD. Yes?

  Do you mean that you have a Toshiba Recovery disk?

  If Yes, then it's like you said; put the recovery disk in the CD/DVD drive to start this disc and during the procedure, you will be asked which version you want to choose.
  Then choose 32-bit that s it ;)

• Tecra A11 - 11N - after that the BIOS update programs not loading now

  My model is Tecra A11 - 11N. I ran the BIOS update and now some of my programs, including ITunes, Nokia Ovisuite, payer VLC etc. are not running. I tried to uninstall and reinstall them, but same problems.

  In any case to come back before upgrade?

  Hi evangny,

  I also Tecra A11 in front of me and have installed latest version of BIOS but this didn't affect all installed programs. BIOS and installed programs are different.
  What you can do is load the default settings in the BIOS after the update.

  Can you be a bit more detailed?
  What exactly happens if you try to start these programs? You get an error message?

  You use the version preinstalled Windows from Toshiba?

• Tecra A11 - possible disk HARD 12.7 mm thick?

  How can I check if a hard drive 1 TB 2.5 "12.7 mm thick will fit in my Tecra A11 without having to buy one to try?

  Good question. Call the nearest service Toshiba and ask? I mean who can offer more help with what Toshiba service.
  In any case, I'm sure you can use it.

  What you can do is to remove the HARD drive cover placed at the bottom. And check the installation of the HARD disk. Check the HARD drive carrier. As far as I know, 4 screws HARD drive are on the same place for two hard disks and these 3 mm should not be problematic.

• Tecra A11 - less than 10 ips in Skyrim on

  Hello
  I have a Tecra A11 i7 which came with a wiped HARD drive
  I installed win 7 pro and the drivers from the Toshiba site, including the pilot Intel Turbo Boost Technology.

  Even with all the settings set to low temperatures, vid Skyrim runs only less than 10 frames per second.
  I upgraded 4-8gig ram, but this did not help.
  The GPU is Intel, so I can't use Geforce experience.

  I have a Dell Vostro V131 i5 which takes place to better Skyrim.
  But the screen is smaller and i/o ports are 90% of dead, so I'd rather use the Toshiba.

  There are 4 "unknown devices" in Device Manager, but none of them look relevant.

  Does anyone have any ideas?

  Thank you

  To be honest, I have no reasonable explanation because I don't have this video game and can not test it on my Tecra A11 - 19M.
  In my opinion this Tecra is typical business very bad for the games and the machine for office work.
  It does not offer good graphics performance and it is not the best for gaming.

  I use it for daily activities and games use different model Satellite P with nvidia GPU.