Rules under 3.10 are accompanied by measures incentive comments banned?

Similar Questions

• on my desktop, the icon, (text under the icon) are highlighted, is anyway to have just the text under the icon? Thank you

  on my desktop, the icon, (text under the icon) are highlighted, is anyway to have just the text under the icon? Thank you

  This is probably caused by your background color of your screen.  You can confirm this by:

  If you have a Web page on your screen, then you will need set the color manually by:

  (1) right click on your desktop and select "Properties".
  (2) this should bring up your "Display properties" dialog box  (You can also get it by going to your control panel and double-clicking on 'Display'.)
  3) click on the tab "Office".
  (4) on the bottom right of the dialog box, there is a 'Color' option and below which shows the colors of the office - this must match what you see on the screen.
  (5) simply change the color to whatever color you want and then click on the 'OK' button to close the "display properties".

  If you do not have any web content on your desktop, you can set the transparent icon labels by:

  (1) right-click on 'My Computer' then click 'properties '.
  2) click on the "Advanced" tab
  (3) in the 'Performance' section, click on the button "settings".
  (4) make sure that "shadows fall to use the desktop icon labels" is checked
  5) click on the 'OK' button to get out of the "Performance Options".
  "6) click on the 'OK' button to get out of" System Properties "
  (7) right click on desktop
  (8) mouse on "arrange icons by".
  (9) be sure that "Lock Web items on desktop" is unchecked.  (If it is, just click once.)

• ¿Possible to place the paragraph "rule" under blank spaces?

  Is it possible to place the paragraph "rule" under the blank spaces?

  FYI, I have write equations using tables and a horizontally split cell to hold the numerator (top) and the denominator (bottom). If the numberator has fewer characters than the denominator, the division (in my case, the "rule") bar is too narrow.  I would like to add spaces before and after the numberator to the rule to match with the denominator, giving the equation looks nice. Spaces before the text of numberator carry a rule, but not spaces AFTER the text of numberator - hard spaces, or em-spaces, nor space en dash, or any other I can find. (Using the line of background cells as the dividing line does not work for my project.)  Thanks in advance.

  You should be able to underline one space, but why not use a real rule below? You can set on the desired width of column to any withdrawal, regardless of the characters in the line.

• In our site web the kind of product order under our categories are random with Firefox, but IE, Chrome is fine, any ideas?

  The sort order of products under our categories on our website is random with Firefox, but the categories of products are in the correct order with IE, Chrome, etc.. This incorrect order occurs on different computers, e.g. Firefox, Windows 7, XP, etc. and not is not compliant. To make matters worse, sometimes it is random with Firefox and return then to be sorted correctly, but IE, Chrome, etc. are always in the correct order.

  I get the blue beauty first when I specify 'Default' sort order and blue Gigantea first when I specify 'Low price' sort order. This seems to be implemented using a cookie so that if I reload the page, the order is not reset to the default value.

  Edit: However, if I close the tab and open the link again, it reverts to the default.

• NOR-DAQmx run options under additional installers are not displayed

  At halfway in this FAQ (http://zone.ni.com/devzone/cda/tut/p/id/3021) talks about the various Runtime options available when you include the NOR-DAQmx driver in a LabVIEW Installer - they are full and 5 different options of operation. I have 2011 LabVIEW and NOR-DAQmx 9.3.5; the only installation type I see is complete. No idea what I may have missed to install or configure correctly?

  Thank you

  Jorge

  Hi Jorge -.

  You make an excellent point raise this question.  The reality is that the documentation is a bit a type-o.  The latest version of DAQmx which allowed this ability multiple-install type was 8.7.1 that allowed full, TERM 3 and 5.  Version 8.6.1 allowed all full of Runtime and RT 2-5 selectable options.

  This was changed in the development of the installer because features such as Measurement & Automation explore (MAX) by omitting makes it much more difficult to program source files that use the DAQmx driver.  Limited choice DAQmx Installer problems in future development. SignalExpress is also omitted in some versions.   This change was made in order to avoid questions that were considered to be a problem when the installers have been created with these minimalist installs.  So I'll make this change to the Developer Zone confusion invites future readers.

  I really appreciate your message and bring it to our attention.

• Are there special measures that I must follow before a reinstall of Windows 7 on SSD?

  I read a lot about safe deletion and quick formatting and partitions with regard to SSDS, so I would like to know if I should do something special before reinstalling my OS to an SSD.

  If you do a new install of Windows 7 to a new SSD no special steps required during installation. Some readers SSD require manual 'too provisioning"which is basically leaving on the last 10% of the SSD not allocated.

  Once the installation is complete if the SSD manufacturing is a utility for the management and maintenance of the SSD install and read the guide the user on what the utility includes in the way of features, some of which are for post Windows installation to optimize and maintain the best performance of your SSD.

  If you re - install Windows 7 on an already used SSD then remove 'all' the partitions and perform a "Secure Erase" which will reset the SSD back at his own expense out of the box ("RAW"). And then install Windows.

  J W Stuart: http://www.pagestart.com

• In the project manager, records under HTML files are duplicated in the Images, multimedia, records of luggage and Style sheets. -What happened? Duplicate folders and subfolders are empty, but cannot be deleted.

  I am using HR 11.0.4.291. Everyone knows that before (see screen capture)? I want to solve this problem, if I leave it for the writers of the future tech. Any suggestions are appreciated.

  

  Oh, and it occurs to me that article I have driven you is old enough (but still relevant).

  The "fix" for it is click on the icon below to toggle the display of the project manager.

  

  See you soon... Rick

• Objects of the Virtual Machine under health Badges are unknown.

  Hi all

  VCOPs, execution 5.8 build 1537842 licensed as advanced fairly new.  I've been running for about a month now and learn what I can in the time.  I noticed that my health is linked badges are a great unknown subset of virtual machines.  I have not found too much more precisely related made in me in the right direction so far.  I've attached a screen as well.  I didn't know if it was a global problem vCOPs or if it was related to the individual virtual machine, or even my setup.  This does not affect the heat in other badges just health cards and its minor insignia.

  Thank you!

  Hi all - I wanted to give you guys an update that we tried something that seemed to work.  If I didn't initially spot checked the permissions in the view hosts and clusters that I had not checked in the computers view virtual and models.  I know that in the past for other permission problems we saw where subsets of VMS in the computers view virtual and models would lose some of their permissions, and I think that's the case here.

  I re applied permissions of vcops at the level of the vCenter virtual machine and view of models for the 1 vCenter which affected VM resided and as soon as the authorization has been applied the unknown servers became again.

  Things seem to be back to normal now.  I end by restarting the VAPP or having to draw cards.

• Add rules under the menu text in the Panel of the accordion?

  Hello

  The customer asked rules provided for in the text, to show the entire width of the Accordion Panel. I can't understand how .
  
  For example, I need to add a sharing probably rule in a lighter tan/gold color across the width of the Panel accordion, between the HOME and HOW IT WORKS:

  

  Select a submenu entry (top left of the Muse' menu item 'window must be stated.)

  The value 'coup' to '0 '. Then click the orange word "stroke". Here you can set separately to all edges.

  

• Error ERR - 10768 current Application ID and security group ID are not the measures

  Dear all,
  
  I had the default below code in my login page and it was running fine.
  
  (wwv_flow_custom_auth_std). Login
  P_UNAME = >: P101_USERNAME,.
  P_PASSWORD = >: P101_PASSWORD,.
  P_SESSION_ID = > v ('APP_SESSION').
  P_FLOW_PAGE = >: APP_ID | » : 1'
  );
  
  Then I replaced the code above with the code below, and now he's in error "error ERR - 10768 Application ID and current security group ID are not constant".
  I can't understand what is wrong with the code. Please correct me where I am wrong.
  
  declare
  vpage_no number 4;
  Start
  
  If: P101_USERNAME = "DEMO" then
  vpage_no: = 2;
  on the other
  vpage_no: = 1;
  end if;
  
  (wwv_flow_custom_auth_std). Login
  P_UNAME = >: P101_USERNAME,.
  P_PASSWORD = >: P101_PASSWORD,.
  P_SESSION_ID = > v ('APP_SESSION').
  P_FLOW_PAGE = >: APP_ID | vpage_no
  );
  end;

  Yousuf,

  You did not follow the convention used in the original, try:

  P_FLOW_PAGE =>: APP_ID |': ' | vpage_no
  );

  Scott

• If we have an image and someone photoshoped it and black lines painted on some information can see us under the painted area?

  Please help me:)

  Hi dizars,

  Greetings!

  If someone hid information by painting that black, unfortunately there is no way to keep this information.

  Like paint that black crushed these pixels.

  Concerning

  Jitendra

• rejected mac addresses are not placed in vlan comments

  Hi all

  I'm kind of new to the switches and learned a lot by reading the documentation sites. My job is to activate authentication aaa on our Cisco switches, we have a 3750stack, a few 3560 s and some 3550 s. I test on one of the 3560, a WS-C3560G-48PS 12.2 (53) SE1-IP-BASE running. Next week I'll update of firmware for 12.2 (55), but with this version, everything should already work.

  Basically, the only thing I asked to do at the moment is Mac-Auth Bypass configuration. If the Mac address is accepted, RADIUS returns the VLAN, the device should be placed in, for the most part VLAN 4.

  If the radius (freeradius v 2.1.10) server sends a rejection (see below), the port is not set to the vlan comments, because I expected.

  1. 19

     12/21/10 4:23:19.000 PM

     Dec 21 16:23:19 10.1.1.207 37473: 2204830: .Dec 21 16:20:31.950 CET: %AUTHMGR-5-FAIL: Authorization failed for client (f0de.f119.9870) on Interface Gi0/29 AuditSessionID 0A0101CF0000086CF832980B Host=10.1.1.207 SourceType=syslog source=udp:514 client_mac=((f0de.f119.9870)) client_action=FAIL LINEPROTO_LINK=AUTHMGR-5

  2. 20

     12/21/10 4:23:19.000 PM

     Dec 21 16:23:19 10.1.1.207 37472: 2204808: .Dec 21 16:20:31.950 CET: %MAB-5-FAIL: Authentication failed for client (f0de.f119.9870) on Interface Gi0/29 AuditSessionID 0A0101CF0000086CF832980B Host=10.1.1.207   http://olsplunk:8000/en-US/app/search/flashtimeline?auto_pause=true&q=search%20host%3D%2210.1.1.207%22# SourceType=syslog source=udp:514 client_mac=((f0de.f119.9870)) client_action=NOT   http://olsplunk:8000/en-US/app/search/flashtimeline?auto_pause=true&q=search%20host%3D%2210.1.1.207%22# LINEPROTO_LINK=MAB-5

  3. 21

     12/21/10 4:23:18.000 PM

     Dec 21 16:23:18 10.1.1.207 37471: 2204776: .Dec 21 16:20:30.935 CET: %AUTHMGR-5-START: Starting 'mab' for client (f0de.f119.9870) on Interface Gi0/29 AuditSessionID 0A0101CF0000086CF832980B Host=10.1.1.207 SourceType=syslog source=udp:514   http://olsplunk:8000/en-US/app/search/flashtimeline?auto_pause=true&q=search%20host%3D%2210.1.1.207%22# client_mac=(f0de.f119.9870)   http://olsplunk:8000/en-US/app/search/flashtimeline?auto_pause=true&q=search%20host%3D%2210.1.1.207%22# client_action=START LINEPROTO_LINK=AUTHMGR-5

  Can someone tell me where I'm wrong?

  Thank you

  Chris

  Relevant parts of the running-config:
  AAA new-model
  !
  Group AAA dot1x default authentication RADIUS
  Group AAA authorization network default RADIUS
  AAA accounting delay start
  start-stop radius group AAA accounting dot1x default
  start-stop radius group AAA accounting network default
  !
  AAA - the id of the joint session

  !
  control-dot1x system-auth
  !
  interface GigabitEthernet0/29
  235 a description
  switchport mode access
  switchport voice vlan 2
  load-interval 30
  bandwidth share SRR-queue 10 10 60 20
  queue-series 2
  priority queue
  authentication event failure action allow vlan 7
  action of death event authentication server allow vlan 4
  living action of the server reset the authentication event
  multi-domain of host-mode authentication
  Auto control of the port of authentication
  MAB
  MLS qos trust device cisco-phone
  MLS qos trust cos
  Auto qos voip cisco-phone
  spanning tree portfast
  service-policy input AutoQoS-Police-CiscoPhone
  !
  interface Vlan1
  IP 10.1.1.207 255.255.255.0
  !
  interface Vlan2
  IP 10.1.10.207 255.255.255.0
  !
  default IP gateway - 10.1.1.201
  IP classless
  !
  activate the IP sla response alerts
  RADIUS-server host 10.1.1.24 auth-port 1812 acct-port 1813
  RADIUS timeout 10 Server
  Server RADIUS # 7 button wouldn't you know
  RADIUS vsa server send accounting
  RADIUS vsa server send authentication
  !
  end

  Information of VLAN:

  Ports of status for the name of VLAN
  ---- -------------------------------- --------- ------------------------------
  1 default active Gi0/6, Gi0/8, Gi0/14, Gi0/15
  Gi0/18, Gi0/21, Gi0/29, Gi0/30
  Gi0/34, Gi0/36, Gi0/37, Gi0/49
  Gi0/50, Gi0/51
  2 voice active Gi0/1, Gi0/2, Gi0/3, Gi0/4
  Gi0/5, Gi0/6, Gi0/7, Gi0/8
  Gi0/9, Gi0/10, Gi0/11, Gi0/12
  Gi0/13, Gi0/14, Gi0/15, Gi0/16
  Gi0/17, Gi0/18, Gi0/19, Gi0/20
  Gi0/21, Gi0/22, Gi0/23, Gi0/24
  Gi0/25, Gi0/26, Gi0/27, Gi0/28
  Gi0/29, Gi0/30, Gi0/31, Gi0/32
  Gi0/33, Gi0/34, Gi0/35, Gi0/36
  Gi0/37, Gi0/38, Gi0/39, Gi0/40
  Gi0/42, Gi0/43, Gi0/44, Gi0/45
  Gi0/46, Gi0/47, Gi0/49
  3 active video
  4 active DHCP Gi0/1 and Gi0/2, Gi0/3, Gi0/4
  Gi0/5, Gi0/7, Gi0/9, Gi0/10
  Gi0/11, Gi0/12, Gi0/13, Gi0/16
  Gi0/17, Gi0/19, Gi0/20, Gi0/22
  Gi0/23, Gi0/24, Gi0/25, Gi0/26
  Gi0/27, Gi0/28, Gi0/31, Gi0/32
  Gi0/33, Gi0/35, Gi0/38, Gi0/39
  Gi0/40, Gi0/41, Gi0/42, Gi0/43
  Gi0/44, Gi0/45, Gi0/46, Gi0/48
  5 active transfer
  6 active Test ESX
  7 COMMENTS-VLAN active
  999 native active
  1002 fddi-default law/unsup
  default trcrf 1003 act/unsup
  1004 default fddinet law/unsup
  1005 trbrf default law/unsup

  Network type VLAN SAID MTU Parent RingNo BridgeNo Men BrdgMode Trans1 Trans2
  ---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
  1 100001 1500 enet - 0 0
  2 enet 100002 1500 - 0 0
  3 100003 1500 enet - 0 0
  4 100004 1500 enet - 0 0
  5 enet 100005 1500 - 0 0
  6 100006 1500 enet - 0 0
  7 100007 1500 enet - 0 0
  999 100999 1500 enet - 0 0
  1002 101002 1500 fddi - 0 0
  1003 trcrf 101003 4472 1005 3276 - srb 0 0
  1004 etnbdf 101004 1500 - ieee - 0 0
  1005 trbrf 101005 4472 - 15 ibm - 0 0

  VLAN AREHops STEHops backup RTC
  ---- ------- ------- ----------
  1003 7 7 off

  VLAN SPAN remote
  ------------------------------------------------------------------------------

  Ports of secondary primary Type
  ------- --------- ----------------- ------------------------------------------

  Hello

  Just to the user the correct names, what you want is a vlan auth failure (that you configured correctly). VLAN comments is for PCs that do not have capacity dot1x (do not respond to dot1x packages) but for the avoidance of the mac, the event of "no-response" will never happen.

  Now that we have explained, your config seems therefore quite ok actually. I'd go with debugs to check what the problem is.

  Debug RADIUS

  debug all EMP

  debugging authentication feature mab all
  debugging authentication feature mda all

  Nicolas

  ===

  Remember responses of the rate that you find useful

• quiz to measure your comments

  Hello

  Is it possible to add a smiley face image to correct feedback to a question of the quiz, 9 Captivate?

  To be exact: I have a character that I imported my quiz slide and when the user clicks on the button submit, if they get it is correct, I want to be able to replace the image of the character with a version where he is smiling. Is this possible?

  Thank you!

  Just tried this out, but I don't know if it will fit you. It can be done on the master slide, it's a shame:

  • Select the legend of feedback that you want to add a smiley
  • Open the status display
  • Add a text caption
  • replace the Wingdings font
  • Insert a smiley (J, K, L) and position

  The second part of your question is different. If you want to replace the character, you will need to use custom comments, get rid of the default feedback. The idea is to immediately start the second stage of the submission process, which means that you run actions on success immediately. However, if you allow multiple attempts at the level of the question, this is not the case for the last attempt action that will happen only after the last attempt. More info on this kind of tweaking:

  Question Question slides in Captivate - Captivate blog

• In XP Documents and Settings, are files under Admin, default user, all users, and duplicate files etc?

  I see in Windows XP under Documents and Settings administrator, all users, default user and owner records. This is a duplication of files? I'm trying to clean up my hard drive and I would like to have just a structure, such as the owner or the administrator. Can I get rid of all the others and save a workspace of dick? How do I do that?

  * original title - more disk space? *

  N ° don't get rid of one of these data structures, or later, you'll be sorry.

  For everyday use, you should use the profile of 'owner '.  All your documents, music, images and other data must be different subdirectories to the title of owner.

  The administrator is a built-in account for emergency use administrator privileges (for example, if your daily profile becomes corrupted).  Probably, you don't see administrator on the Welcome screen.

  Every user is an account that is used to share data between different users.  If there is only a single user defined on your computer, there should be very little in every user account in the "My Documents" of this profile part, but some applications that you have installed may have placed hidden files in different folders in the profile all users.

  Default user is a model that is used to create new user profiles.

  If you are interested in which is placed on your hard drive, download and run JDiskReport.

  If you fear that you progress low hard drive space, there are a few things you can do, but all of them are essentially temporary measures.  If you're really under out of space on your hard drive, you can buy a bigger hard drive.

  Run Disk Cleanup (start > run > cleanmgr.exe > OK)
  Adjust system restore space
  Disable the Indexing Service
  Uninstall the applications that you use is no longer

• AGGREGATION TO CHANGE THE RULE IN RESPONSE TO A MEASURE

  Hello Experts,
  
  I have a degree in my fact table, which is a 'price' and I don't want to set up an aggregation by default (sum, avg, min, max... etc) in my Business Model (Administrator). I want the user to be able to establish a 'rule of aggregation' in response to this measure.
  
  So, I'm in response, select my measure of my model, and then click Edit formula and change rule of aggregation "Avg" sounds do not work.
  
  According to me, Miss me something, a setting or option.
  
  I'll appreciate if you guys can help me with this... Thank you.

  With the new system currently in place, if your call is answered, please mark completed so that others will know of completed threads.