Run an application labVIEW under Linux

Similar Questions

• Why a VI vacuum open every time I run the application LabVIEW 2014?

  I recently installed my upgrade to LabVIEW 2014 full Developmet system. Now, every time I run a LabVIEW VI empty appears. I can't find an option that turns off. Can someone help me out here?

  
  

• LabVIEW application developed on windows can be installed under linux?

  Hi all

  I use suite developer LabVIEW 2009 on windows 7 PC. I was wondering if the application created with labview on PC can be deployed on the linux platform? If not, is it possible to develop the LabVIEW application on windows to deploy on linux platform?

  I was also wondering if computers single-board as Beagleboard, Raspberry Pi are loaded with linux, labview application can be deployed on these computers?

  (in simpler words, I wonder, with existing suite of Labview 2009 developer on windows, can I develop a data acquisition application and deploy it on single-board computers that have linux installed on them.)

  Thank you!

  Nilesh-

  To create an exe on a Linux platform, you need LabVIEW for Linux with its application builder. You can open the source on the Linux machine.

• Is it possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Problem - one of my clients recently tested my new LabVIEW application and asked how the arrested LabVIEW application can be restarted without clicking on the "Run" (right arrow) button.

  Is possible solution - possible to connect my Application ' Stop' button with the "Run" button of LabVIEW?

  Thank you!

  Barry

  The big problem is in your Acquistion to stop audio event. You run the LabVIEW stop sign which is the equivalent of hitting the Cancel button in the toolbar.  (See contextual help on that).  You can stop the acquisition, but you don't want to stop your LabVIEW program.  You need this case in the event your computer to transition state in a sleep mode when you do not make any purchase.  Then hit the purchase button to start again transitions the machine state in the acquisition.

  In your case of program output, you want really to leave LabVIEW it.  You want to run and stop commands like closing the com port and one of these activeX references.  Then allow it to stop the while loop.  Turn the LabVIEW out outside the loop so that once everything is cleaned, your application may close.  You probably want to wrap this command in a case structure so that if you are in the execution environment, it leaves your application.  But if you are in the development environment, you don't want to cause your LabVIEW environment stop.  Another thing is that right now, you actually have a race condition in the Exit event.  The com port will close first or LabVIEW will come out.  There is no defined order of execution.

  Alternatively, you can have an event to close panel? in this way, you haven't accidentally short circuit all your program by pressing the X key.  You want to capture this event, discard it.  And if you want to not actually closed, did trigger the Exit Program button so that you can gracefully shutdown.

• How to run under Linux of the CGF 11 g 10 g (AS)

  I'm the developer of oracle 11g on windows forms.
  
  My application server is on Linux (10g) platform
  
  
  How to run the application server of the CGF 11 g to 10g?
  
  Published by: Naeem Akhtar, July 13, 2011 10:43

  You cannot run a form 10g with a length of 6i, and you can't run a form 11g with a length of 10g. If you want to run forms 11g, you have to install an application server in 11g.

  see you soon

• LabVIEW for linux (Ubuntu 64-bit)

  University of Helsinki uses a centralized managed linux installation on all linux workstations.  The distribution is based on Ubuntu 9.10, and it is considering moving to 10.04 LTS.  Almost all of the facilities are 64-bit, only a few old machines (> 5 years of age) are still using 32-bit installation.

  In the Physics Department, there are about 500 machines and about 30% of those who are linux workstations.  We strive to get LabVIEW for Linux installed on our desktop, then run under Ubuntu 64-bit.

  1 problem (not a problem): For some strange reason, the installation media does not CD/DVD use normal files (iso9660) system, but the media is formatted with the file system "Mac OS X HDF +".  It works under linux, of course, but has been a source of mild confusion.  It would be wise to change the normal file system to the next version.

  2nd problem: The installation under Ubuntu does not work.  Namely:

  First I mount the media with the "mount-t hfsplus/dev/sr0/media/cdrom0" and try running the installation script
  CD/media/cdrom0/Linux/labview-2009
  sudo knew
  . / INSTALL

  Installation is not going smoothly.  According to the error message, the script is not found the library libbz2:

  / Media/cdrom0/Linux/LabVIEW-2009/bin/rpmq: error while loading shared libraries: libbz2.so.1: cannot open shared object file: no such file or directory

  However, the library is in standard place:
  $ ls/lib/libbz2 *.
  /lib/libbz2.so.1 /lib/libbz2.so.1.0 /lib/libbz2.so.1.0.4

  I know, "support of the distribution" list only include Mandriva, RedHat, and SUSE.  The version of LabVIEW is the latest version of the fall of 2009.  Does anyone have any ideas what to try next?

  see you soon,
  Pekko

  
  

• BIAPPS 11.1.8.1 installation hangs at 0% "Copying files stage 5 of 6 ' under Linux

  Hello

  We are trying to install BIAPPS 11.1.1.8.1 on a Linux system, based on the steps on the installation document link

  https://docs.Oracle.com/CD/E38317_01/doc.11117/e35981/install.htm

  , we proceeded to the stage where you want to install the

  3.3.3 Installing Applications of BI to Oracle using the Business Analytics application Suite Installer.

  Problem: While run us the following command under linux

  . / runInstaller - jreLoc < jdk or jrockit location >

  We are able to move to the stage where provide us the path of the middleware for installation, however once that the ' Copying files stage 5 of 6 "starts and the percentage of installation = 0%. The installation does not any more (screenshot attached). We carried out the following checks

  1. check the necessary Variables

  2 DB, Weblogic, the servers are all running

  3. check if there is any folder created as part of this installation = NO

  Please advice as to what could be the problem

  The log file excerpt:

  *****************************************************************************************

  IAppsInstallAction

  [2014-11 - 10T 23: 17:45.543 + 05:30] [as] [WARNING] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] error in renaming/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/ext/jlib in/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/ext/jlib_platform

  [2014-11 - 10T 23: 17:45.543 + 05:30] [as] [WARNING] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] error in renaming/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/prereq in/u01/Oracle1/Middleware/Oracle_BI2/inventory/Scripts/prereq_platform

  [2014-11 - 10T 23: 17:45.596 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biapps in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.609 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsshiphome in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.616 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsinst in the home of oracle: / u01/Oracle1/Middleware/Oracle_BI2 is: null

  [2014-11 - 10T 23: 17:45.672 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 13] [ecid: 0000KaQoJpEFw000jzwkno1KOFcW000004, 0] Version of oracle.bi.biappsshiphome in the shiphome: / u01/software/biapps/biappsshiphome is: 11.1.1.8.1

  *****************************************************************************************

  Hello

  According to the document

  Oracle home directory

  Specify the Oracle Home for BI, for example, Oracle_BI1. Do not specify any other Oracle home or choose to create a new. Oracle home for the BI directory is where the binaries of software for Oracle BI Applications and operational planning Applications must be installed.

  could you please make sure that it is only on Oracle Home

• FMS 4.5 livepkgr application breaks down Linux server using any memory

  We run FMS 4.5.7 associated with the application of the standard livepkgr for direct RTMP and HLS (HDS module disabled streamer). For some reason any after 30 minutes process httpd starts using memory system more and more, and in a minute or two, it blocks the server because it completely empty memory. It doesn't matter how many users are connected to the stream. What I've noticed, is that if there is no user HLS (or HLS is disabled) fine, however it is enough to connect at least one user TLS on the server after 30 minutes and the memory usage begins to increase. If the user connects to 0 - 30 minute window it market.

  I tried to play with the recording options in Event.xml for that stream to flow, but it did not help. I tried to save in a file and in segments.

  Our server has 32 GB of RAM.

  We have modified the file of Apache configuration for workflow Sandbox HLS at the instance level, but it should not be a problem, shouldn't it?

  < location/hls-live >
  True HLSHttpStreamingEnabled
  HttpStreamingLiveEventPath '... / applications/livepkgr/events/_definst_.
  HttpStreamingURLSandboxLevel 'Inst '.
  HttpStreamingContentPath '... / applications.
  HLSMediaFileDuration 8000
  HLSSlidingWindowLength 6
  HLSFmsDirPath "..".
  HLSM3U8MaxAge 2
  HLSTSSegmentMaxAge - 1
  HLSMaxEventAge 300
  HttpStreamingUnavailableResponseCode 503

  Options - Indexes FollowSymLinks
  < / location >

  P.S. We also run application vod in parallel for RTMP and HLS vod streaming. RTMP of VSD and CTS works very well.

  After two weeks, I finally solved it.

  Anyone faced with the same question, make sure you have the serial number of the license charge AND fully rebooted server. At least under Linux by restarting the server through Flash Media Administrator Console let some zombie processes running that blocks the license from loading correctly. Restart all OS instead.

• Difference in DataInputStream.ReadFully under Linux and Windows

  Hello
  I wrote a client application that needs to run in a Windows and Linux client.
  My client involves communication with the server on socket.
  
  The key code that is involved in this issue is:
  DataInputStream.readFully (byte [])
  
  One of the tests is:
  While the client is connected to the tester pulled server the network cable from the server, so the communication between the client and the server fell.
  
  This gives a Windows client and the same code running on Linux (RHEL 5.5) client throws exceptions.
  I need ge thtis work under Linux.
  
  What should I do? clues as to why the Windows client throws an IOexception and Linux client does not work?
  
  What follows is the exception that is thrown in the Windows client: java .net .SocketException: connection reset
  at java.net.SocketInputStream.read (unknown Source)
  at com.sun.net.ssl.internal.ssl.InputRecord.readFully (unknown Source)
  at com.sun.net.ssl.internal.ssl.InputRecord.read (unknown Source) 13/01/2011 10:49:37:254: AVSP called closeConnection.
  
  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord (unknown Source)
  at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord (unknown Source)
  at com.sun.net.ssl.internal.ssl.AppInputStream.read (unknown Source)
  at java.io.DataInputStream.read (unknown Source)
  at java.io.DataInputStream.readFully (unknown Source)
  at java.io.DataInputStream.readFully (unknown Source)

  Socket.setSoTimeout (), or HttpURLConnection.whatever this is the case, see the Javadoc.

• Foreground of Oracle process to access data under Linux files

  As far as I know, processes user in an Oracle database running the application code, but the processes of database running Oracle database server code (server process analyze and execute the SQL statements issued through the app, read data of data files blocks and return the results to the application.) Background treats the archive logs, update the headers of all the data files to save the details of the control point, written content of the buffers of data files, runs the recovery if necessary, etc.)
  
  However, I could see the oracle user processes to access data files in my Oracle database. When I look for the processes to access data belonging to the tablespace files "recprov", I get the following:
  
  [root@ymir ~] # lsof | grep recprov
  Oracle Oracle 465 11u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 465 13u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 465 15u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 11u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 13u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 964 14u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 13364 14u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 13364 76u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 16445 17u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 16445 18u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 20522 REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659 82uW
  Oracle Oracle 20522 REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658 122uW
  Oracle Oracle 20532 44u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 20532 75u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  Oracle Oracle 20534 17u REG 8.18 4823457792 /ora2/oradata/essepr3/recprov_tb_02.dbf 48496659
  Oracle Oracle 20534 79u REG 8.18 6291464192 /ora2/oradata/essepr3/recprov_tb_01.dbf 48496658
  
  As you can see, there are 7 oracle processes that access data files: 4 processes user and 3 background processes:
  
  [root@ymir ~] # ps - ef
  ...
  Oracle 465 1 Jan27 0? 00:00:23 oracleessepr3 (LOCAL = NO)
  Oracle 964 1 Jan27 0? 00:00:25 oracleessepr3 (LOCAL = NO)
  Oracle 13364 1 0 Jan13? 02:45:02 oracleessepr3 (LOCAL = NO)
  Oracle 16445 1 0 Jan21? 00:00:05 oracleessepr3 (LOCAL = NO)
  20522 1 0 2009 Oracle? 00:09:59 ora_dbw0_essepr3
  20532 1 0 2009 Oracle? 00:04:24 ora_ckpt_essepr3
  20534 1 0 2009 Oracle? 00:04:10 ora_smon_essepr3
  ...
  
  And I confirmed this information from the data base repository:
  
  SQL > select p.SPID, SSE. TYPE, SSE. Username, SSE. MACHINE, SSE. PROGRAM
  session $ v ESS, v$ process p
  where p.SPID (465, 964, 13364, 16445, 20522, 20532, 20534) and SES. PADDR = p.ADDR;
  
  USER NAME OF TYPE SPID MACHINE PROGRAM
  ----- ----------- --------------- --------------- ---------------------------------------------------------
  20522 BACKGROUND dbserver (DBW0) oracle@dbserver
  20532 BACKGROUND dbserver oracle@dbserver (CKPT)
  20534 BACKGROUND dbserver oracle@dbserver (SMON)
  13364 USER DBSNMP dbserver emagent@dbserver (TNS V1 - V3)
  964 RECPROV USER appserver JDBC Thin Client
  16445 USER SYSTEM userPC PlSqlDev.exe
  465 RECPROV USER appserver JDBC Thin Client
  
  * RECPROV is the name of the user of the application database.
  
  My question is, why are there user processes to access data files? I think that it does not match the process architecture defined by Oracle. And most importantly, it does not mean a security leak in the database?
  
  DB version: 10.2.0.3, dedicated
  The Linux Version: Linux 2.6.18 - 53.el5xen #1 SMP Sat Nov 10 19:46:06 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
  
  Thanks in advance

  Hello

  There seems to be some confusion, even in the Oracle documentation, in terms of nomenclature.

  Think of it this way. There is the client program that connects to Oracle, such as SQL * Plus, Toad, custom, etc. written application. This program runs on the client. This may or may not be on the database server.

  Then there's the Oracle database server process. They run always on the database server. These processes are of two types, the USER and the background.

  You can see:

  SQL> select background,count(*) from v$process group by background;
  
  B   COUNT(*)
  - ----------
            65
  1         37
  

  Here are copies of the file binary oracle attach directly to the SGA and interact with database files. The binary oracle works with several different "personalities" based on the different purposes, he is currently serving. The type of background process, are divided into different specific methods for specific purposes.
  Yet once, observe:

  SQL> select pname from v$process where background = 1;
  
  PNAME
  -----
  PMON
  VKTM
  GEN0
  DIAG
  DBRM
  PING
  PSP0
  ACMS
  DIA0
  LMON
  LMD0
  
  PNAME
  -----
  LMS0
  LMS1
  RMS0
  LMHB
  MMAN
  DBW0
  DBW1
  LGWR
  CKPT
  SMON
  RECO
  
  PNAME
  -----
  RBAL
  ASMB
  MMON
  MMNL
  MARK
  LCK0
  RSMN
  GTX0
  SMCO
  W000
  RCBG
  
  PNAME
  -----
  QMNC
  Q001
  CJQ0
  Q005
  
  37 rows selected.
  

  Thus, each background process serves a different purpose. For example. DBW0 concerns only to write data from the buffer cache data files and maintaining all data structures associated with it. Each background process above serves a different purpose, I will not go into all. Generally, the background processes start up time of instance startup, even though some may be started on demand, at a certain time after the start of the proceeding.

  Now, consider a dedicated server model. When you connect to the database by using SQL * Plus, for example, you run the binary "sqlplus". Assume that you are connected via SQL * Net. In this case, sqlplus connects to the listener, the listener creates an oracle server process, type 'USER '. This process always runs on the database server. It runs under the user 'oracle', and it provides your real and direct interface to the database. This user can interact with the database and read the database files directly.

  Mainly, your server processes the USER will read the data from the cache buffers and, in the case of an absence of cache, will read the data in the data files and loading into the buffer cache. In addition, according to the code path, it can directly read or write to the datafiles, bypassing the buffer cache.

  So, the bottom line, all server (USER and BOTTOM) processes, interact with the database and associated files. The code of client program (sqlplus, Toad, etc.) NEVER directly interacts with the database.

  Hope that things cleared up.

  -Mark

• FRM-10043 can not open the file under LINUX

  FRM-10043: could not open the file.
  I created a form correctly in windows. It works very well.
  Now, I have to use it under LINUX. Then I copied the fmb file in Linux
  where the default test.fmx is placed.
  
  Now, I've run the sub query and got the result can not open the file.
  
  
  [orabif@br bin] $ sh frmcmp_batch.sh userid=CNT/CNT@cmt
  compile_all = Yes module_type = form module = logonfile.fmb
  
  
  10.1 forms (form of the compiler) Version 10.1.2.0.2 (Production)
  
  10.1 forms (form compiler): Release-Production
  Copyright (c) 1982, 2005, Oracle.
  All rights reserved.
  
  Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  
  PL/SQL Version 10.1.0.4.2 (Production)
  Oracle V10.1.2.0.2 - Production procedure generator
  Oracle 10.1.2.0.0 graphic virtual system Version (Production)
  Oracle Multimedia Version 10.1.2.0.2 (Production)
  Oracle tools integration Version 10.1.2.0.2 (Production)
  Common tools Oracle area Version 10.1.2.0.2
  Oracle 10.1.0.4.0 Production CORE
  
  FRM-10043: could not open the file.
  
  Form not created
  
  
  Please help me solve this problem.
  
  * I know that there is no need to compile OLB files. but my forms display error that
  FRM-18108 has no dependent objects.
  
  When I use Frmcmp.sh GUI is the compiled form succesffully if there is no OLB attached with it.
  It gives Fr-18108 when OLB is attached with the form that he
  
  Timely help is needed...
  
  Thanks in advance...
  
  with cheers
  Sprity...

  spirty,
  This sounds like it could also be a permissions problem. I'm guessing that when you copy-n-Paste the form on the LINUX Server, you did what Windows Explorer. When they are copied to the server LINUX file will be created with the default privileges defined on the file. I recommend that you connect to the LINUX Server and check the permissions on the file. If your file permissions do not match the permissions of the text.fmb (or other files .fmb you have there) I suggest that you change the permissions so that they match.

  I hope this helps.
  Craig...

  If my response or response from another person was helpful, please mark accordingly

• Satellite A300 - 1 5 ACPI is not supported under Linux

  I have laptop Toshiba A300 - 1 5. When I run Windows absolutely everything works fine.
  But when I boot Linux (I tested the two 8.10 of Ubuntu and Fedora 10), Fn keys does not work.
  Neither is bluetooth, which is a USB hidden and disabled by default.

  I noticed that pilots * toshiba.ko* and * toshiba_acpi.ko* cannot be loaded.
  I tried to load them, but both * dmesg * and said */var/log.messages*: * {color: #000080} not a cell phone supported. {color} *.
  I also tried to use * toshset, toshutil, fnfx *, but they all need * / dev/toshiba * and * / proc/acpi/toshiba * or * / proc/toshiba * exist.
  And it is impossible to load them, because the cell phone is not supported.

  I have two questions:

  1 Toshiba plans to cooperate with suppliers of Linux in order to fix this bug.
  I have visited many Linux forums and many people's complaint they have keys functional unfunctioning under Linux.
  So, I think that if the product is thrown on the market, it must be supported, is it not?

  2. How can I temporarily fix this bug to get the missing functionality before the next version of Ubuntu or Fedora? Can someone advice any solution.
  (Well, please don't say: leave Linux and use Windows.) I want to use Linux, not Windows. "And I want a job in the same way).

  If you want additional information about a bug, I will provide.
  Thank you very much.

  Hello!

  I have a Toshiba Satellite A300 - 1 M 1 PSAGCE under Ubuntu Intrepid (kernel 2.6.27.11).

  _I realized that only Ricoh SD/xD Card does not work (it worked on VIsta). _

  Anything else is OK.

  I think that our laptops are related, take a look at my ACPI and journal modules.

  Bq. + $ lsmod | grep acpi +------+ 16400 1 acpi_cpufreq +------+ freq_table 13568 3 acpi_cpufreq, cpufreq_stats, cpufreq_ondemand +------+ 4 47800 acpi_cpufreq processor, thermal +.

  Bq. + $ ls/proc/acpi / +------+ battery dsdt event fadt fan info power_resource processor embedded_controller ac_adapter sleep thermal_zone wakeup video +.

  Bq. + $ dmesg | grep-i acpi +.
  Bq + BIOS-e820: 00000000bfe86000 - 00000000bfebf000 (ACPI NVS) +------+ BIOS-e820: 00000000bfeee000 - 00000000bfeff000 (ACPI data) +------+ ACPI: USE 000FE020, 0024 (TOSINV r2) +------+ ACPI: XSDT BFEFE120, 0064 (r1 TOSINV TOSINV00 1 1000013) +------+ ACPI: FACP BFEFD000, 00F4 (TOSINV TOSINV00 1 MSFT 1000013 r4) +------+ ACPI: DSDT BFEF1000, 7745 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: FACS BFE93000, 0040 +------+ ACPI: HPET BFEFC000, 0038 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI : APIC BFEFB000, C 006 (TOSINV TOSINV00 1 MSFT 1000013 r2) +------+ ACPI: MCFG BFEFA000, 003 c (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: ASF! BFEF9000, 00A 5 (r32 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: SLIC BFEF0000, 0176 (r1 TOSINV TOSINV00 1 MSFT 1000013) +------+ ACPI: BOOT BFEEF000, 0028 (TOSINV TOSINV00 1 MSFT 1000013 r1) +------+ ACPI: SSDT BFEEE000, 0655 (r1 PmRef CpuPm 3000 20051117 INTL) +------+ ACPI: DMI detected: Toshiba +------+ ACPI: PM - timer IO Port: 0 x 408 +------+ ACPI: address Local APIC 0xfee00000 +------+ ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x00] activated) +------+ ACPI : LAPIC (acpi_id [0x02] lapic_id [0x01] activated) +------+ ACPI: LAPIC (acpi_id [0x03] lapic_id [0x00] disabled) +------+ ACPI: LAPIC (acpi_id [0x04] lapic_id [0x00] disabled) +------+ ACPI: IOAPIC (id [0x04] address [0xfec00000] gsi_base [0]) +------+ ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) +------+ ACPI : INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 level) +------+ ACPI: IRQ0 used by substitution. +------+ ACPI: IRQ2 used by substitution. +------+ ACPI: IRQ9 is used by substitution. +------+ ACPI: HPET id: 0x8086a201 base: 0xfed00000 +------+ Using ACPI (EMAC) for SMP configuration information +------+ ACPI: Core review 20080609 +------+ ACPI: looking for initramfs Custom DSDT +------+ ACPI: bus type pci registered +------+ ACPI: EC: pick up at CBS in the DSDT +------+ ACPI: _OSI (Linux) ignored by DMI BIOS query +------+ ACPI: active interpreter +------+ ACPI: (supports the S0, S3 S4 S5) +------+ ACPI: IOAPIC using for interrupt routing +------+ ACPI : EC: non-query interrupt received, switch to stop mode +------+ ACPI: EC: Storm detected GPE, transactions will use polling mode +------+ ACPI: EC: GPE = 0x16, I/O: / order = status 0 x 66, data = 0 x 62 +------+ ACPI: EC: pilot started in interrupt mode +------+ ACPI: PCI [PCI0] root bridge (0000:00) +------+ ACPI: PCI Interrupt Routing Table [\_SB_. PCI0._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. P32_._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP1._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP2._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. EXP5._PRT] +------+ ACPI: PCI interrupt Routing Table [\_SB_. PCI0. PEGP._PRT] +------+ ACPI: PCI interrupt link [INKA] (IRQ 3 4 * 5 7 9 10 11 12) +------+ ACPI: PCI Interrupt Link [LNKB] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKC] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI Interrupt Link [LNKD] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI : PCI Interrupt Link [LNKE] (IRQ 3 4 5 7 9 10 11 12) * 0, disabled. +------+ ACPI: PCI Interrupt Link [LNKF] (IRQ 3 4 5 7 9 * 10 11 12) +------+ ACPI: PCI interrupt link [LNKG] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: PCI interrupt link [LNKH] (IRQ 3 4 5 7 9 10 * 11 12) +------+ ACPI: power resource [FN00] (on) +------+ pnp: ACPI PnP init +------+ ACPI: type pnp registered bus +------+ pnp: ACPI PnP: found 8 devices +------+ ACPI : Type of non ACPI pnp bus +------+ PCI: use ACPI to IRQ routing +------+ ACPI: RTC may wake from S4 +------+ ACPI: [fan] (on) +------+ ACPI: SSDT BFD77C18, 026 (r1 PmRef Cpu0Ist 3000 INTL 20051117) B +------+ ACPI: SSDT BFD75598, 0537 (r1 PmRef Cpu0Cst 3001 20051117 INTL) +------+ ACPI: CPU0 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:00: registered as cooling_device1 +------+ ACPI : processor [CPU0] (supports 8 throttling States) +------+ ACPI: SSDT BFD76E18, 01CF (r1 PmRef ApIst 3000 20051117 INTL) +------+ ACPI: SSDT BFD77F18, D 008 (r1 PmRef ApCst 3000 20051117 INTL) +------+ ACPI: CPU1 (power States: C1 C2 [C1] [C2] C3 [C3]) +------+ processor ACPI0007:01: registered under cooling_device2 +------+ ACPI: processor [CPU1] (supports 8 throttling States) +------+ ACPI : transition device [FAN] to D3 +------+ ACPI: thermal Zone [THRM] (44 c) +------+ ACPI: Power Button (FF) [PWRF] +------+ ACPI: Power Button (CM) [PWRB] +------+ ACPI: lid switch [LID0] +------+ ACPI: battery [BAT0] (battery present) +------+ ACPI: AC adapter / CC [ADP0] (online) +------+ peripheral acpi: 1B: registered under cooling_device3 +------+ ACPI: Video Device [VGA] (multiple heads: Yes Rome: no message: no) +------+ iwlagn 0000:03:00.0 : state changes by ACPI to D0 + power------+ ACPI: WMI: responsible Mapper +------+ iwlagn 0000:03:00.0: state changes by ACPI to D0 + power------+ ACPI: EC: lack of confirmation, cut the interrupt mode. +

• HP Probook s 4440: the update of the BIOS under Linux

  Hello

  My laptop (HP Probook 4440 s) is in the list of laptops with BIOS updates related to security issues [1].

  But I'm on Linux, for which no updates seems to be available [2], although there is an update of the BIOS available for Windows [3]?

  Could someone tell me how to get and apply this update via Linux...

  THX,

  Abdellatif

  [1]: https://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04393276

  [2]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_107629_1 & swEnvOid = 202...

  [3]: http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229488 & swItemId = ob_135974_1 & swEnvOid = 413...

  I did recently on my HP ProBook 450 G2 Kubuntu Linux 15.10 running.

  A new version of the BIOS (01.16 Rev.A 1 December 2015) was available, but for Windows only.

  What I had to do to install the BIOS under Linux:

  * Download the exe file (for example: sp74048.exe): this is an archive

  * unpack with 7zip

  * go to my laptop configuration: restart, press [ESC] >

  Configuration of the BIOS F10 > MAIN > system update BIOS > BIOS update using local media

  * read the instructions:

  "Place the system on a FAT32 partition no BIOS BIN file more

  on the system or on a removable USB hard drive

  under the folder "Hewlett-Packard\BIOS\New.

  Then, add or verify that the HP Bios update utility (HpBiosUpdate.efi)

  and the signature file (HpBiosUpdate.s12) are

  on the same partition FAT32 under

  the path to the following folder: "Hewlett-Packard\BIOSUpdate. »

  * Take a flash drive, create the folder ""Hewlett-Packard\BIOS\ " "

  copy the whole folder "BIOSUpdate" since the original installation file for her

  create the "New" folder and copy the bin on it (in my case "M74_0116.bin")

  * If at the end, the flash drive looks like this:

  \---Hewlett-Packard

  + - BIOS

  | \---New

  |      Mxx_xxxx. bin

  |

  \---BIOSUpdate

  all files here

  * place the flash drive in the laptop and "BIOS update using local media" hit the button [I accept] below "the system BIOS will be updated immediately.'." "

  Then update the BIOS HP appears saying: the system BIOS is updated day. > writing new BIOS Image. > Veryfying new BIOS Image. > restart.

  Fact.

  It is really beyond me why HP does not provide a simple archive with the appropriate directory structure and a readme file so that anyone could update the BIOS regardless of operating system.

  Warning: I'm just an average Linux user. This procedure worked for me, but before use, you must consider the risks for yourself. You SHOULD know what you're doing.

• Portege Z930 - slow Wi - Fi on battery under Linux

  Hello

  I just bought a Z930 and I run Linux Mint and Windows 7.
  I have a problem under Linux that I have on Windows.
  When I put my computer on battery, there is a significant signal drop.
  Do someone why there is such a problem? We can solve this problem by setting up my network device?

  Thanks for your help!

  Badmaul

  Wifi pilot would need updating, looks like maybe try a Ubuntu Live CD v12 and see how it goes. Ubuntu is very friendly Toshiba.

• No material listed in Labview 2010 Linux DAQ

  Hello

  I have a problem with DAQmx Base 3.4.0 under Linux:

  mxbaseconfig shows my NOR-6009 device to the USB port. I can also create tasks corresponding to the nor-6009 in there. When I try to create a task in Labview 2010, one of the constant I/O are always empty. Dropdown menu arrow is grayed out. If I get the name of the device directly in the constant, he through me an error :-( Do not know Semms like Labview, which DAQmx Base instruments are connected...

  With devices VISA, I don't have this problem. All VISA devices are displayed in the dropdown of the constant and work correctly.

  lsdaq gives me:

  --------------------------------
  Detect of National Instruments DAQ devices
  Find the following materials:
  NEITHER 6220: "Dev1" (PXI1::4:INSTR)
  OR USB-6009: "Dev2' (USB0::0x3923:0x717B:0119B3BD: RAW)
  --------------------------------

  I use

  RedHat Enterprise Linux 5.5

  NI - 488.2 - beta - 2.51 b 1

  NI-VISA - 5.0.0

  NOR-DAQmx Base 3.4.0

  LabVIEW 2010

  All installers worked well...

  No idea how to access my OR-6009?

  Felix1234 wrote:

  It the device port ID is connected by a string variable to the Vi DAQmx Base... also works perfectly for me. But I do not know why the variable I/O noit work...

  DAQmx Base does not have controls that LabVIEW as DAQmx done [1]. Because the driver does not use background services, it cannot be said LabVIEW what devices and channels are available on the system.

  [1] NEITHER-DAQmx Base tasks and physical channels are not listed in the task of LabVIEW and string constants and controls
  http://digital.NI.com/public.nsf/allkb/57393FEDF313E99B86256F0B0010AD2D