Run apps on Eve adcfgclone db

Similar Questions

• How do you run apps on creative cloud? I can't seem to execute or to see them on my desk

  How do you run apps on creative cloud? I can't seem to execute or to see them on my desk

  Hi JasonLuong,

  You will need to go to www.creative.adobe.com and log in with your Adobe on which you bought the subscription ID.

  You can go to the Download Center and then start to download all the available cc applications. It will first download and install the desktop creative cloud tool in your computer. This creative cloud office will show you the possibility to download all programs CC, updates, etc.

  Thank you

  Kapil Rupani

• Profile - incompatibility of the subject of the E-mail E-mail Content from mail mail Native company running app

  I have a 6 s iPhone running iOS 9.3.1 and I use the app native mail to access my corporate email. What I live now is a recurring problem that can occur over a period of a month repeatively. Whenever I click on a thread individual email to read more in detail, I can observe is not about e-mail and the content of the e-mail. It's especially hard when I try to reply to the email, I can not with certainty what the email trail join the contents of the correct email.

  This problem is when I leave the Mall and re - enter the mail application again.

  Is there anyone who face the same problem, like I do and know it as the bug that causes this misrepresentation contained?

  Hope that I am able to have members to exchange the data in the present.

  Thank you!

  Settings - Mail, Contacts - organize by thread - Toggle off (white)

• Cannot debug/run app in the Simulator from IDE update

  I did the error has earlier to upgrade my momentics IDE to 2.1, and since I'm unable to successfully launch my app to the market or debugging in a simulator. The application loaded on the Simulator and I can run from the home screen by pressing on it, but while the splash screen is displayed, the application stops immediately when launched from the IDE. There is no error message displayed in the console, the application stops just immediately after the splash screen is displayed.

  I tried with five simulators which worked very well all the way from 1.0.x to 10.3.x. I am lucky to have an old copy of the 10.1.0 IDE still on my system and I can run and debug my app very well using this one, but I would really be able to use the IDE to 2.1 again. It worked fine on the 2.0 IDE too, these problems just started to happen after the 2.1 IDE update.

  Has anyone else seen this, and if so, have you found a solution?

  OK, never mind. I accidentally upgraded my old working version of the IDE too all by improving the SDK (I forgot that it updates too the IDE) and panicked because then it would be not too run or debug from the IDE. I solved it but by uninstalling the TWO versions of the IDE, then put it back up from scratch. After the clean install, everything is fine and I can run and debug fine with 2.1 IDE.

  I guess it's something messed up with the upgrade process. A fixed.

• Impossible to determine return PID of launch AND can not run app due to the 8 error

  Hello

  I'm new on NDK BB as well as waterfalls and the C. M AI cannot run a sample application of cascade on BB Dev Alpha Simulator.

  When I try to run the app I get pop 'impossible to determine PID returned to launch '.
  The icon of the application on the Simulator, but when I click on the icon to launch the application, I get the pop up 'Impossible to launch my App name in the error 8'

  Please, can someone guide me what mssing 'em here.

  Concerning

  Hello

  I don't know how but my problem is now solved, today I just started the system. Clean, build and run the application and the error is no longer there (I tried several times yesterday, do not know why he has not worked at the time)

  @borceg build configuration is set to Simulator-debug

  Thank you all for your help.

  Concerning

• BlackBerry Smartphones Running & Apps Whats meters...

  Ok.. Curve 8530 Marvin here...
  I got the works about installed in my machine which tells u how and what applications are running or waiting in the unit... Kind of neat and a bit useful...
  Meters which is a purchased app. I also had... Counters tells u what takes place in each division of memory in your device with impressive graphics and photo illustrations problem is that it has a garbage collector (memory recall) that u can not disable and stimulates every 40 seconds and you can not set the time intervals above... Wouldn t 40 second boost severely drain my battery? Confused here because I already have booster memory 4.1.4 and really think that developers should inform me of things like garbage collector which runs automatically until I pay for a * beep * app... I'm a bit upset...

  Hi, Marvin.

  I have never much cared for applications that will tell you what other apps you have running or how they consume a lot of memory.  Pressing on and now that will display your menu for a second or two common apps button and go to your Applications list is not too much effort, in my opinion.

  As to the application which increases the memory every 40 seconds, which would certainly impact the battery.  Of course, the memory gets cleaned but the battery died at the end of each day.

  When you say you want the app developers would disclose something like that from the start, I hear ya!

  Thanks for your post.

• Running apps as official version CC

  I have recently subscribed to CC. I downloaded the app CC and have connected to run download other apps of CS of CC. When I open an application that was downloaded I invited to connect. When I click the sign in button I am taken to a screen that asks me if I want to run the application as a trial or sign up to the app. When I click on register, I am asked to enter a serial number, which is not provided as part of my membership of the CC. How can I get the apps to function as official versions and not the trial?

  I received e-mails from confirmation of CC on the activation of my membership.

  Connect you or activation errors

  Mylenium

• How can I disable the screen saver when you run apps fullscreen.

  Using vista 64 bit and I cannot figure out how to disable the screensaver for the apps full screen.   I don't know how to WMP, but when you watch a video fullscreen online he goes to the standby.   Used to be able to do it with xp.

  Hello deadeyea09,
   
  Welcome and thank you for viewing on Microsoft Answers - Vista Community Forums!

  We need more information to be able to help on this issue.

  1. what applications are fullscreen you use?

  2. which site we use to play video online?

  Options to disable the screen saver need to have within this player in particular, watching movies online, if there is no option to turn it off, then we need to turn off the screen saver manually. Please follow the instructions below to turn off manually:

  1) click Start and then click Control Panel

  2) click on Customize

  3) click on screen saver

  (4) select NONE under screen saver

  5) click apply and close the window

  Please let us know if it helps.

  Thank you and best regards,
  Diana D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• issues running app with Flash builder 4

  Hi all

  I recently started having issues running in Flash builder.  Projects that had no problem running are now sent me errors as follows:

  1046: type was not found or is not a constant of compilation: Array.

  1046: type was not found or is not a constant of compilation: Boolean.

  1046: type was not found or is not a constant of compilation: function.

  1046: type was not found or is not a compilation constant: int.

  etc...

  If I close Flash builder and re - open, I am able to run the project again, but the problem will come back later.  Even the FullRSSReader sample project has this problem.

  Any suggestions?

  Zymatic

  Hey,.

  This type of problem has bought about a month ago or not. Basically, if you use the QNXStageWebView class in your application it cause all these mistakes, you said. they are not real mistakes just flash builder think there are errors - a bit like a false positive. We propped it up like a bug related to the QNXStageWebView, because it is undocumented and has already been mentioned as really bug.

  Here is a link to the previous thread:

  http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/possible-bug-repeate-re-building-...

  Also of note, if you go to project > Clean it will clear up all the mistakes albit temporarily. I hope this helps. Good luck!

• screenshot of my Simulator with my running app

  How to take a screenshot of my Simulator with my application running on it.

  Reason, I need to screen shot of my application, but don't want to recreate and resize everything on photoshop just for a screenshot. Any help would be thank you very much.

  If you are on Windows, press print screen on the keyboard, start MSPaint and paste the image into Paint... You can crop then just to the Simulator window = should be pixel-to-pixel because simulator is not resizable. I hope this helps.

• How do I kill a running app in my code? is this possible?

  I can get the list of applications running in memory in the tracking code:

  _appDes = _appManager.getVisibleApplications ();

  including the pid, icon, modulehandle, modulename and etc.

  How can I kill the application?  There the blackberry api?

  If the request of the victim does not support the message or not coorprates, I can't do this?

  Yes, you're right.

  When the blackberry turned off the power, it should close all applications, how does?

  When the unit is completely extinguish it closes off the Virtual Machine Java, than does a stop at low altitude for all running processes.

• Simulator works; Cannot run app (BB10 10.0.9.386)

  [My apologies if there is another thread that treats this exactly, but I can not find one - outside it with a subject not descriptive.]

  I have recently implemented the dev environment 3 beta on my Mac (after you have uninstalled the previous, I had not had the chance to really use it). The similator seems to work well. The works of browser and I can't telnet in (although I get 'permission denied' for ssh).

  However, when I try to configure the development environment, it fails to connect. What I'm running is a project of Cascades base the "hello world" by default that is created when you create a new project.

  • NETWORK card in NAT mode Simulator:
  • • Can telnet to the IP address at the bottom left; The fine Simulator browser works
    • Auto-Discovery detects the Simulator, but the connection fails
    • Not got an error when downloading Simulator debug token, but the status remained to something like ' not installed or date in the future. "
  • NETWORK card in bridged mode Simulator
  • • Can telnet to the IP address at the bottom left; The fine Simulator browser works
    • Auto-discovery does not detect the Simulator, but manually enter the IP address works
    • Downloading the debugging token worked
    • You try to run that program, first gives me the error "a network error occurred all. by communicating with the target  Perhaps as a result 10 second backoff period of the device since the last login, please try again. »
    • Try again gives me: "unable to connect.  Make sure USB cable or Wi - Fi is connected, the IP address is correct, and the mode of development. »
    • After forcing a reboot (where is the reset option in the Simulator?), the debugging token is not found in the config of the target, but the download even once, it seems to work.
    • The target always has "(non connecté)" beside her in the run Configuration dialog box. "

  I use VMware Fusion 5 on OS X 10.8.2.

  I tried to activate the option in VMware allow the virtual machine to use profiling hooks, but the Simulator embarks, then I disabled again.

  On the Simulator, developer mode is on, but shows the IP "169.254.0.1". Troubleshooting doc said if this is the case, try disabling and re-enabling the adapter. Which does nothing (and restarting does nothing) and this address seems to be configurable in 169.254.0.0/16--il doesn't seem to be the execution status info. "Subject > network" shows the good IPv4 address.

  I put a password for the device. The access settings to the "storage &" have effect? (I changed to match what I use on my PlayBook, and I can copy files on via the Finder).

  I am at a loss. Really local wish that Jam BB was not while I was away on vacation.

  OK, how to delete this question?

  Somehow through the stages of "create your first project", I missed the instructions on the selection of the target generation and had left at the default value, which obviously does not work on the Simulator.

• Cannot run app in the Simulator!

  Hello

  So I did the project using Flash Builder and since the SDK is buggy and can't be packaged and signed using Flash Builder, I have updated the content property of the XML to "App.as" and packed using the command line. I also did the 2 step of signing process.

  Now I have installed the signed bar file using the command line, and when I open the app, I see a gray screen!

  I think that 'App.as' is an action script file which I use in the tag content. On the other hand, Flash Builder creates a SWF file using this and which uses as content. My question would be, how can I do?

  In addition, no one knows about the next SDK release? This SDK is really buggy!

  Hey Foundation.

  you mix two steps into one. Please do the following:

  1. Change your content of the tags in the - app.xml back to the original value. so, something like this:

                             [This value will be overwritten by Flash Builder in the output app.xml]
     

  2. Then, you need to compile your application. After resetting the - app.xml under your src directory, you can do this part in flash builder. to do this and after measurements, please carefully follow the instructions in this thread:

     http://supportforums.BlackBerry.com/T5/Tablet-OS-SDK-for-Adobe-Air/useful-tip-package-images-via-com...

  After that, you should be able to package and sign your App. Good luck!

• Cannot run app available or restricted access to modes of developers.

  Hello
  
  We want to run the application in available or restricted access to modes of developers. so that we can move our QA changes to production and test. We try to log in as an ADMIN user (access Workspace Administrators) but the application cannot run. get access to this application is for application developers, please try again later. and the access to this application is limited, please try again later errors.
  
  Our apex version: 3.0.1.00.08
  
  Change the def attributes request for restricted access
  
  status = restricted
  Build status = exΘcution and build the application
  Limit to list of users separated by commas (status must be equal with restricted access): ADMIN
  
  Change the attributes of def in demand for available to developers
  
  status = available to developers
  Build status = exΘcution and build the application
  Limit to list of users separated by commas (status must be equal with restricted access): (leave empty)
  
  using sso authentication (don't know if this has an impact on) for our application.
  
  Thanks for the help in advance.
  
  RAM

  RAM,

  using sso authentication (don't know if this has an impact on) for our application.

  And one of your users SSO is named ADMIN?

  You have apex accounts that match exactly the SSO user names for developers?

  Scott

• Cannot debug/run app in the Simulator

  Hello.

  I have a project of cascades using target_10_0_9_2318 and host_10_0_9_529.  The project brings together and connects properly.  I'm testing this point on the Simular because I don't have a camera BB10 and PlayBook is still 2.1 OS.  The version of the Simulator is 2318.

  This is the error message I get Momentics when trying to debug the application (note that this message is displayed after I provided my debugging password):

  Error in the final launch sequence
  Impossible to prepare and upload the binary file
  Package failed: 1
  Error: Path access valid asset 'libfonts.so '.

   

  I also had this message on a previous NDK and have updated it and my project, thinking that it was a bug that has been fixed.

  I understand what the message says, but I don't know how to correct it and why he can't find this font library.  I can't link the library using lfonts - because the library cannot be found.

  I work under Linux.

  Thank you

  Colin

  Hi all.

  I don't know why libfonts.so is not found, but I decided to try just remove my file of bar - descriptor.xml.

  This allowed the program to start. I should point out that I have added these libraries using the function "Add library" of Momentics. I therefore believe that there is a bug in this feature.

  Thank you
  Colin