Run & copy a DVD

Similar Questions

• Satellite A40 - cannot run on my DVD-Rom data DVDs

  My DVD-Rom works CD leave good but I tried running Linux Fedora copied on DVD the DVD - Rom works forever unanswered and this problem remains before starting windows. I checked the DVD on other laptops, but it worked fine.
  Is this a problem in my DVD lens? I'll try to clean it using cleaning CD.
  Does anyone have any info on this problem?

  Hello

  What type of DVD you are using?
  There are different models of Satellite A40, but I guess that all use the same drive.
  I checked the properties of the DVD player and according to this information, the Player supports these media:
  (Read/write) CD - R, CD - RW (read/re-write), CD-ROM, DVD - ROM, DVD-R (read only), DVD - RW (read only), DVD - RAM (read-only)

  If you use the+ DVD so there could be a problem with reading.

• Is A satellite - possible to copy a DVD on my PC?

  Is it possible to copy a dvd on my pc since the dvd watching on Windows Media Player.

  Hello

  I guess you want to watch a DVD movie on your laptop?
  Right?
  Well, you need a software DVD player to watch a DVD movie.

  I use VLC Player it s small and freeware software that allows to read almost all file formats.

• How to copy a DVD with a DVD-R/W laptop?

  I have a laptop with a DVD-R/W. How to copy a DVD? I am puzzled, if I FIRST have to 'Save' DVD-content somewhere and then REMOVE the DVD and insert a blank DVD to burn. Please give directions to the not so computer expert. Thank you

  You must save a temporary copy of the disk on a hard disk of the computer.  Burning software more it will do it automatically for you.  As the same disk drive, select the source and the destination.

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• COPY A DVD USING WINDOWS 7

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  I COPIED THE OLD TAPES VHS VIDEO TO DVD USING ROXIO 10.  THEY WORK VERY WELL.  NOW, I WANT TO MAKE A COPY OF THE DVD TO GIVE TO MY CHILDREN AND NOTHING ORIGINAL I TRY SIMPLY ALLOWS ME TO COPY THE DVD.   WHAT GIVES?

  ==================================
  If you have the full version of Roxio I guess
  It has an option to copy a non-commercial DVD.
  If it's not... see the following information:

  The following freeware can create an ISO Image
  that allows to burn copies.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (During the installation there will be an option to install
  the "Ask Toolbar"... you can uncheck only)

  The following tutorials may be worth a visit:
  (basically you use ImgBurn to create an ISO Image...
  then you use ImgBurn to burn the ISO Image on a
  new blank DVD)

  Check out the following tutorials...

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• How to copy a DVD to a blank DVD

  How to copy a DVD to a blank DVD

  Hello

  Download and install the free software ImgBurn.

  The best way to then copy a DVD to a blank DVD is as follows.

  1. create a disc Image of the DVD file you want to copy on your PC - a guide for doing this is here.

  2 write this in your blank DVD Disk Image - a guide to it's here.

  Kind regards

  DP - K

• How to copy a DVD on HP TouchSmart 300 desktop

  I have a HP TouchSmart300 desktop computer. Is there a program that comes with the computer that allows you to copy a DVD. Do not try to copy a protected DVD.  I'm allows using Roxio and Nero on my old laptop, but have had no success in trying to do it on this new computer. Would appreciate help. cm

  Hello

  Here is a method you could use.

  Download and install the free software ImgBurn.

  The best way to then copy a DVD to a blank DVD is as follows.

  1. create a disc Image of the DVD file you want to copy on your PC - a guide for doing this is here.

  2 write this in your blank DVD Disk Image - a guide to it's here.

  Kind regards

  DP - K

• Cannot run the CD DVD-R games

  Separated from this thread.

  I have not optiarc driver DVD - RW DVD - RW AD - 7201 S 5 ATA but I have Optiarc DVD + R AD - 7700H ATA Device driver fully implemented at level and so I am unable to run the CD DVD-R games. And when I open the driver CD, it's just writtern y drag files to these folders to add to the disc and I drag the files it says please insert a writable disc.

  Looks like you have a bad CD player and need a new.

• How copy a dvd burned on my computer so I can burn it again?

  Ive tried all the ways with media player and media center and to copy files, but it will not transfer any a few clips dvd and no sound... help?

  The workout DVD has been copied to a friend and now I want to copy its copy but cannot figure out how to copy her copy on my computer, it will play so I know that his record is good

  When the copy of a home made copy unprotected
  DVD like the one you describe... the following freeware
  Works for me... maybe it would work for you:

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy...

  The freeware ImgBurn can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Click left on the green circle with the white arrow... it is said
  «Click here to download»

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Copy downloaded DVD menus

  I just bought and installed Adobe Premiere elements 14 a update for my laptop, I also downloaded more than 4 GB of DVD menus, music, titles and text to this program on my laptop, I intend to install this program on my desktop PC in the near future

  I spoke with a product specific technician yesterday concerning the downloaded copy of DVD menus, music, titles and text files of the Adobe Premiere elements 14 on my laptop through to my desktop PC.

  He advised I back up my organizing catalog for separate storage, and then to import into my office once I installed the program. I wanted to verify that this indeed copierait the 4 GB and more downloaded files, because I want to avoid downloading twice that I limited the ability to download on my home network, I have read the procedure described in the following web page:

  https://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#t of the CIPO-1

  But I'm not sure if this indeed copierait the files I want that she, as on the installation, the program asks you to copy in my catalog of my old version of first items 12 and all downloaded menus, titles etc do not appear, can you confirm that it will do what I am asking, please?

  [Transferred to elements Mod forum]

  [title published by Mod]

  I'm not sure what the technical support advised you, but if you want to copy the downloaded models, etc., from one computer to another, first install the program on the second computer by using the disc download or Setup and then copy all of these folders and files from one computer to another:

  C:/ProgramData/Adobe/Premiere Elements/14.0/Online

• First Elements 11. Copy of DVD in AVCHD format

  I don't have a source clips and PREL project is based. I don't have a DVD in AVCHD format.

  I have Windows 8.1. I tried to burn a disc with instructions on how to burn a disc with no additional software. When I did a copy, I wasn't able to play.

  Can you recommend a burning software that will create an exact copy of DVD in AVCHD format and also to make a copy of a Blu - Ray (BD) disc?

  Thank you. Lev.

  I think Imgburn will do what you want... Read http://forums.adobe.com/thread/1322583 for notes on installing Imgburn WITHOUT any add-ons toolbar... ImgBurn to use slow burning speed your drive and use the media... I put my 1 x burn speed and allows dajuster Imgburn for the current minimum

• Problem copying to DVD-R and error... Please insert a disc or NO driver found

  Hello:

  I used 10 Roxio with Sony DVD-R for a copy of a sports game I have,

  In detail as follows:

  When one put an original DVD which contains sports-game, he's fine, but when I put a brand new Sony DVD - R for the copy of this DVD game, he said:... Not found disk or NO driver found, although there is a legitimate new Sony-DVD-R I bought this morning of typical products. I tried another DVD - R, about 5 more to do the job, but it's the same thing.  Does not copy.

  I am using"Roxio 10" and works well with another CD - R, DVD-R, even to copy music and Sport related programs.

  Ask me how to fix this?  Because I need to send it to my friend tomorrow.

  Any help on this would be greatly appreciated.

  Thank you

  Hello Cosmos10,

  I suggest you follow the link below and run the Fix - it who will automatically diagnose and repair problems related to the CD/DVD drive:

  http://support.Microsoft.com/kb/982116

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Download a digital copy of DVD for laptop

  Hello
  I recently bought 2 movies who also have the digital copy so that I can put on the laptop and watch if I don't have to pack around the DVD. The problem I have is when I chose to transfer to Windows Media Player, it sends me to a window that wants me to 'Upgrade' of DRM. I'm not able to access the button "Upgrade". He clicks not on. For this reason, I am not able to download the digital copy. What should I do, or else to whom should I contact?

  Sincerely,
  RubyRedFish

  Hi RubyRedFish,

  Thanks for choosing the Microsoft Answers forum.

  Reregister the dll files and check them off below if it works very well.

  1. open the start menu and type "cmd" in the search box.

  2. place your mouse on the entry "cmd.exe" that appears, right-click.

  3. choose "Run as Administrator".

  4. copy and paste below the dll files and press ENTER.

  regsvr32 wmpband.dll
  regsvr32 c:\windows\system32\wmpns.dll
  regsvr32 wmpvis.dll
  regsvr32 wmp.dll
  regsvr32 wmpasf.dll
  regsvr32 wmpcd.dll
  regsvr32 wmpcore.dll
  regsvr32 wmpdxm.dll
  regsvr32 wmpdxm.dll
  regsvr32 wmploc.dll
  regsvr32 wmpshell.dll
  regsvr32 wmpur.dll
  regsvr32 wmpui.dll
  regsvr32 msxml3.dll

  The latest Windows Media DRM components put the link below:

  http://go.Microsoft.com/fwlink?LinkId=34506

  Restart your computer and download a digital copy of a DVD.

  You can also go through the link below.

  The Player Windows Media DRM: frequently asked questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/7e241b1f-1019-43C1-868d-cafc718d16011033.mspx

  Hope the information is useful.

  Kind regards
  Yama - Microsoft technical support.