Satellite A40 - cannot run on my DVD-Rom data DVDs

My DVD-Rom works CD leave good but I tried running Linux Fedora copied on DVD the DVD - Rom works forever unanswered and this problem remains before starting windows. I checked the DVD on other laptops, but it worked fine.
Is this a problem in my DVD lens? I'll try to clean it using cleaning CD.
Does anyone have any info on this problem?

Hello

What type of DVD you are using?
There are different models of Satellite A40, but I guess that all use the same drive.
I checked the properties of the DVD player and according to this information, the Player supports these media:
(Read/write) CD - R, CD - RW (read/re-write), CD-ROM, DVD - ROM, DVD-R (read only), DVD - RW (read only), DVD - RAM (read-only)

If you use the+ DVD so there could be a problem with reading.

Tags: Toshiba

Similar Questions

  • Cannot run the CD DVD-R games

    Separated from this thread.

    I have not optiarc driver DVD - RW DVD - RW AD - 7201 S 5 ATA but I have Optiarc DVD + R AD - 7700H ATA Device driver fully implemented at level and so I am unable to run the CD DVD-R games. And when I open the driver CD, it's just writtern y drag files to these folders to add to the disc and I drag the files it says please insert a writable disc.

    Looks like you have a bad CD player and need a new.

  • Satellite L500 - cannot run the DVD-ROM games

    I am currently having problems with my Toshiba Satellite L500 series. The problem is, I can run purchased audio CD, as well as DVDs of the films, but I can't run games DVDrom. Music CD will automatically start Media Player very well, as well as films in their corresponding players... Games (like Dragon Age Origins and Left 4 Dead) DVD - ROM cannot read, or be recognized. When I go to "Computer" and try to access the game, it says "no available disk. Please insert disc into drive D: ". So from what I understand, the CD/DVD-rom may not be completely broken if he reads all types, except for games to DVDrom.

    Can someone help me with this please! It is quite frustrating because my computer is just now to a year! I wouldn't think that all computer companies sell computers that fall apart after a year... I was hoping that it was different with Toshiba.

    Once more, the CD/DVD-ROM can read CD and DVD of the film, but NOT the games to DVDrom. Help, please! Thanks in advance!

    Hi adecker,.

    Maybe it s caused due the upper and lower filters in the registry. You should try to remove as you can read in this article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/kb/314060

    I had a similar problem that some discs can't be read more. And I went thorugh based forum to clean the CD/DVD drive lens with a microfibre cloth. Be careful if you do this and don't scratch the lens.
    Check this box!

  • Satellite L - cannot access a Toshiba DVD player

    My laptop Satellite Pro L-series came with windows and upgrade to Win 7, which I am now running. I tried to read a disc that I burned on a comptuer spent, but tells me it's the wrong region (huh?) - my region is set to 4. So I gave up on it for the Nuncio and switched to the Toshiba DVD player.
    When I try to open it, I get a message that module (s) is / are missing. If the restart does not work, re - install the application.

    How can I do this?
    TIA

    Hi billym,.

    Normally, you can download a newer version from the official website of Toshiba DVD player if search you for downloads available for your laptop model:
    http://EU.computers.Toshiba-Europe.com

    But if you have a DVD with a different region code, you need to change the region code of your CD/DVD drive (Device Manager > properties of the CD/DVD drive).

    But don t forget that region code can be changed 4 times

  • Satellite P100 - cannot get the CD/DVD writer to work under WXP Pro

    Hello

    I recently updated my Satellite P100 - 188 (PSPA3E) to run Windows XP Pro SP2.

    I can't have the CD/DVD writer to work well. I looked on the downloads page, but there seems to be nothing. It reads the CD/dvd, but allow me to write to them. If I put a blank CD in nothing happens.

    Someone has ideas how to get this working again?

    Thanks in advance...

    Kind regards

    Matt

    Hi Matt

    Maybe you should install like Nero burning software. Original Toshiba image (WXP MCE) it was an engraving Sonic RecordNow software pre-installed.

  • Satellite P300D - cannot read CD or DVD

    I had a problem.

    "TSSTcorp CDDVDW TS-L633A ATA Device" driver get lost, so I can not read the CD or DVD and do not respond

    I hope that this community gives me the link to this driver * please *.

    PS: Sorry for my bad English

    MY laptop: Toshiba Satellite P300D

    null

    Hello

    For a CD/DVD player, you need a special driver. It s a part of the operating system.
    Is the CD/DVD drive listed in Device Manager correctly or you have yellow exclamation points?

    Try to remove the CD/DVD drive in Device Manager. Choose the drive > right click > uninstall. After that, restart the laptop.

    If it doesn't work you should try to remove the upper and lower filters. Follow this workaround solution Microsoft how to proceed:
    http://support.Microsoft.com/kb/314060

    Good bye

  • Satellite A300 - cannot use the CD/DVD drive

    Hello

    I have Satellite A300 and my DVD drive is not seen by Windows 7.

    I do not see in the Device Manager, and when I use the updates provided by TEMPRO, and on the site, it just won't update.
    When I opened the Toshiba Disc Creator, it gives me an error saying that it does not have any drive connected.

    See you soon.

    Hello

    You should try to remove the upper and lower filters in the Windows registry. So just follow this work around:
    http://support.Microsoft.com/kb/314060

    Another question: can boot you from this drive?

  • Satellite M45: Cannot boot from the CD-ROM or HARD drive

    I get the following messages...

    WHEN BOOTING FROM HDD: "Invalid partition table".

    At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
    By so, even though I have the recovery CD and the computer can not read them.

    I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
    I'm out on this one.

    Thank you

    Hello

    I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
    In this case, the HARD drive must be formatted completely and then you could try to install the OS.

    It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
    Well, it really stupid s :_| situation really stupid!

    However, did you try to boot from another CD? For example Microsoft Windows original CD?
    If not I recommend you to do and eventually the reader will be able to read the CD.
    If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.

  • Satellite A40-151: reader of CD/DVD IDE error #1

    Hi I have a laptop Toshiba SA40-151 model no PSA40E-OCQ1E-EN.
    Two problems really... at startup, it takes forever to the toshiba screen and then briefly displays ' IDE #1 error #, then seems to start... but the performance is slow.

    Next problem, Cann access CD/DVD drive, wont even open the drawer and the drive does not show in my computer. The light is permanently on the drawer, but it works and works. Sometimes at startup until you can get the drawer to open it, but once closed and fully initialized you can not open it and it won't work. Any ideas?

    Hello Paul

    If you use option of advanced search on this forum, you will find many discussions about the IDE #1 error.

    In any case, this error indicates that the drive of your laptop is not compatible and cannot be used. Because of this, she is not in Windows Explorer.

    Good bye

  • Satellite L510 - cannot run system restore

    I want to restore my factory setting series L510

    I have already tried:

    1. hold "0" and press the power button and to hear some noise beep blabla, it brings me to his recovery assistant everything as before,.

    but now, after hearing the noise, it just take me to the STARTING WINDOWS then the Welcome screen

    2 F12-boot manager, nothing happens once again takes me all the way to the Welcome screen

    is this what can I do to restore my laptop to factory setting?

    I this something odd after I restore factory my month of laptop there is, my 1st time seen

    [Pic1 | http://s1274.beta.photobucket.com/user/jasperrenz/media/1111_zpsafbbb5e9.png.html?sort=3&o=1]

    and I get this whenever I try to open the recovery media creator

    [Pic2 | http://s1274.beta.photobucket.com/user/jasperrenz/media/111111111111111111111_zps0e68f598.png.html?sort=3& o = 0]

    PS: I didn't change or remove anyfiles my laptop, please help me thanks.

    Hello

    I think that Satellite L510 is not the European series so I m not quite sure of the HDD recovery procedure.
    But for EU Toshiba HARD drive recovery worked as follows:
    -power up the unit
    -Press F8
    -Choose fix my computer
    -Choose Toshiba Recovery
    -Follow the instructions on the screen.

    It works for you?

  • Satellite A660 - cannot run chkdsk

    I have a satellite a660 laptop...
    My first question is about the win7 disk scan

    I chose to do a check disk... and win7 tells me the next time he will perform.
    When the computer restarts, it shows the countdown chkdsk (if I want to cancel) but when the contdown ends... its stuck and don't scan...
    I need to restart once again...
    Any help?

    My next question:
    As far as I know; the mouse pad is multi touch... (enlarge the pictures and rotate images)
    Well, only the function enlarge works.

    I can't return all images... I try to use the picasa software and also tried to rotate the image in bed in the viewer in win 7...

    Any help?

    Thanks :)

    > I chose to do a check disk... and win7 tells me the next time he will perform.
    > When the computer restarts, it shows the countdown chkdsk (if I want to cancel) but when the contdown ends... its stuck and don't scan...
    > I need to restart once again...
    > Any help?

    Try to scan the laptop using the CCleaner. Tool that allows to clean the registry and HARD drive for free.

    > As far as I know; the mouse pad is multi touch... (enlarge the pictures and rotate images)
    > Well, only the function enlarge works.
    > I can't return all images... I try to use the picasa software and also tried to rotate the image in bed in the viewer in win 7...

    I m not very well on the touchpad features because there are different A660 with different hardware and different properties.
    If the mentioned touchpad function supports then you should check if it should already be enabled on the system.
    This, to go to the control panel-> mouse-> device-> settings settings tab (maybe the properties).

    In any case, you should find all the options that are supported by the touchpad software.

  • After dismantling Satellite A60 cannot detect the CD/DVD drive

    Hello

    I opened my laptop to clean-up and it was the first time that I never opened a laptop. Messed up at the opening of the cd/dvd drive.
    Instead of just pulling out, I started its opening screw but quickly realized that this is not the right way. So I took it out. Rest of the disassembly procedure went well and I assembled it back but he little silver r 2 bands and a small source, which I'm sure that belongs to the CD player and I couldn't adapt it.
    And I don't know how it fits.
    The computer does not detect the drive. Although I can open it by clicking on the Open button, then he hang out by sharp object. (The light will blink showing the power exists in)

    The second thing is the microphone. I've never used until last week, but my voice is going through. The system does not detect any microphone.

    Help appreciated

    Hello

    On this path, it is not easy to say what is the problem with CD/DVD player. Are there signs of the CD/DVD drive in Device Manager or the drive is not displayed in Windows Explorer?

    How did you test mic? Try it with the tape recorder for windows. So you can test the functionality of the mic on the easiest way.

  • Satellite L - cannot boot from CD/DVD

    Hello

    I have the following problem u.z. I can't boot from CD if I laptop. Restart, and then press F12 I only at the option of the hard disk and lan, cd player, it doesn't don't show me.
    In the bios if I go to the Starter Strip, it shows me first second hdd 3rd disc lan, but before the name of the drive, it has an exclamation point because I can't change anything.

    Currently using toshiba windows 7 which I had with the laptop and I now want to install another windows 7 because I share with Windows Toshiba it can't erase me the whole plate.

    Help, please

    Hey Buddy,

    Your ad is a little hard to understand, but if t can boot from CD/DVD and the drive does not appear in the BIOS, it seems to be faulty and needs replacing I think
    Usually, there is nothing of what you can do to get rid of this.

    I put t know which model of laptop you have, but I would like to contact an authorized service provider and explain the situation. Guys can you help to swap the drive. :)

  • Satellite A40-231: cannot burn CDs or DVDs

    Hello

    I can play CDs without problem, but I can't write them and DVD. I tried with Windows XP default recorder (by Roxio as he said), Nero and Infra Recorder but still had the same problem. Combustion process begins and finishes without errors with all of this software, but when I check the contents of the CD later, I see that nothing is written there, the CD is just considered as empty, or sometimes seen with 0 MB of available space, 0 MB total space.

    I tried with the CD - r, CD - RW and the DVD but I got the same problem. I have 2 389 MB free in my disk space hard as he is seen by Nero for the ability of the temporary folder that it uses.

    My DVD-R /-RW is recognized by Windows XP without problem and also, I installed the latest firmware from the site Web of Toshiba.

    Here are my specifications:

    Toshiba Satellite A40-231
    Toshiba DVD - ROM SD-R6112 DVD-R /-RW DRIVE Firmware Version: 1333 (latest news on the site Web of Toshiba Driver)
    System dual boot: Windows XP SP2 and Linux Debian Sarge

    Hello

    In the manual of Toshiba, you compatible o is a list and supported the CDs and DVDs.
    You must use these mediums as they are tested and should work correctly.

    Another tip:
    Go to start > run > and start recording with a command regedit

    Delete values
    upperFilter and UpperFilter of this key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    I've done on my laptop and noticed some improvements

  • Satellite A40: Question about upgrade from the DVD UJ-850

    Hello

    I have a satellite A40, I recently installed a new motherboard to. Everything now works perfectly, and I plan to change the CDRW/DVD drive to a dvd burner.

    The current player is a panasonic-UJDA750. I intend to replace it with a UJ-850 for the dvd burner. Could someone please advise whether it is a good drive to go to any other suggestion and if I need different drivers for the drive to work or is it just a straight swap out.

    See you soon,.

    Hello

    Before you buy a slim drive you must be sure that this drive is compatible with the Satellite A40.
    There is a big difference between external drives for desktop PCs and laptops.
    The master/slave/c-salt settings on slim drives are fixed and cannot be changed.

    If you buy a slim with wrong settings drive, the BIOS does not recognize the drive and you'll get an error IDE #1.

    I recommend that you contact the service provider allowed in your country and ask guys for compatible DVD burner for you A40.

    As a reader of DVD-R/RW compatible, you can use the Toshiba SD-R6112 or drive Pioneer G8CC0001L810 drive.
    I also found some readers of DVD-Multi (CD-R/RW DVD-RAM/R/RW) compatible:
    Panasonic G8CC00019810
    TEAC G8CC00013810

    Sorry for the strange number, but I guess these are the numbers of Toshiba.
    Try google. You may find a full name.

Maybe you are looking for

  • My motorcycle G keeps beeping during a call

    My motorcycle G makes a sound when I am on call. I can not hear it but can be heard on the other side which is very annoying. How to solve this problem? Here are the apps that I have installed which I think you need to know: (1) Intelligent voice rec

  • Do I need with an isolated junction thermocouples?

    I have an application where I need to measure the temperature of the surface at various locations (about 20 to 30 points). I use a cDAQ with several modules of NI9211 chassis. The surface to be measured is copper.  I fear that there may be some spuri

  • Green flashing on HpPhotosmart 5520 when turned off.

    I recently installed the above printer and everything works fine. However when I turn off (on the computer) to the night is a little green light blinks constantly. is this normal or is something of not properly connected? As far as I can see th is st

  • E250 crashing and restarting while 'refreshing' database'

    Hello I have a problem with my e250 (I think as its v1). When I try to turn it on, it goes down during the updating of the database, and then it restarts and continues to repeat again and again the same problem.  The connection to the PC is not possi

  • median stack mode

    I have cs6... not cloud subscriptionI want to stack Smart layers to reduce the noise... the battery option is grayed outI converted my files in Adobe RGB and 8-bit, but did not solve the problemIt was suggested that my version of photoshop is the pro