Run DLL Error Message

Similar Questions

• I get a run dll error message and its saying that something is not found

  When I restart my computer, an error message appears and it says this: C:\users\appdata\local\iboromazizofero.dll

  In addition, the computer has bad to restart

  Hello

  Cannot find this file on Google so you probably dodged some software malware and you should do a
  very thorough control. Message on how to remove the error message if still it y
  After the audits of malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
  Use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• OfficeJet pro 8100: run dll error message

  used to have officejet pro 8100. It has developed a problem. has been told by hp don't have service location so that it sets, had to buy a new printer. did you uninstall to remove the system of 8100. everything seems to be ok. did the installation for the new printer, officejet pro 6830, and it seems to work well.  now the problem... whenever I restart my computer, I get this error message. How to stop?   "Error loading C:\folder\folder\HP OFFICEJET PRO 8100\bin\HPStatusBL.dll" HOW DO I GET THIS TO STOP?

  Hi @bigkahuna404,

  Welcome to the HP Forums!

  I see that you get a runtime error message with your old printer HP Officejet 8100, after uninstalling the software. I'm happy to help you!

  First of all, I would suggest trying the fix it MS, program by Microsoft. If this does not work, you will need to manually remove/disable the item from your startup programs. How to disable Vista and in Windows 7 startup programs.

  Hope this information helps and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Can not use msconfig to Windows 7, download 2 dll error messages run at startup. C:\Progra~3\7ber.dat.

  I get 2 dll error messages run at startup. C:\Progra~3\7ber.dat. I'm going to the Start button to run msconfig & get the same message. Thank you.

  I could not use msconfig in Start button so I opened the window run and used there. Are went to msconfig tab and disabled startup. Now it's working.

• BTTray.exebssdk.dll error message appears at startup

  btray.exebssdk.dll error message appears on starup. I think I know what program is missing. I just want to stop the message to come.

  Verify the path of the dll file... If she is in a place such as \appdata\local\diagnostics\apn\, this is not a system file...
  May be that a third party/malware software falsified some startup items... Most of the time this can be due to malware/adware software removal by an antivirus but do not remove the startup entry...

  Malwarebyte s scanning is a good idea http://www.malwarebytes.org/free/

  But you may need to remove by start up

  (1) if there is everything about the .dll u you described here, to the start system tray turn off...
  http://www.pcandtablet.com/Windows-7-tutorials/1343/how-to-disable-a-startup-entry-in-system-tray-task-bar-in-Windows-7-a.html
  http://www.pcandtablet.com/Windows-8-tutorials/1340/how-to-disable-startup-items-from-Windows-system-tray-in-Windows-8-a.html
  or

  try to use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  If you look at it, it should be under the present

  In case if you can't find using the above methods, it might be under

  taskschedule ===>Scheduler task library. If found delete the entry about the Task Scheduler Library ftphost.dll

  

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key... RESET
  more this could be due to this... If you still get that you can move forward with this...

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll__The specified module could not be found.

  I get the next message after starting my machine.

  RUN DLL error loading C:\Users\Rahul\AppData\Roaming\zljirpe.dll

  The specified module could not be found.

  PL. help me to remove this

  Rahul

  Hello

  Don't forget there is no program can detect or remove all malicious software, so you need to be thorough. Added easy
  to detect and remove malicious software is often accompanied by a much harder to detect and remove the payload. Do
  redundant and thorough work and then use the cleaning methods even if nothing was found. Better to be
  very careful now than to pay a high price later.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• audioeng.dll error message check out iTunes or any program that uses sound

  audioeng.dll error message on Windows Vista 64

  Here is the still unresolved audioeng.dll error message during the startup of iTunes or any other program that uses sound:
  "C:/windows/system32/audioeng.dll is not designed to run on Windows or it contains an error.
  Updates to Vista 64, probably after one of the windows

  have not found a solution yet.
  Please answer if you know the answer to that.
  Thank you.
  -i.

  Yay!
  I fixed it!

  Here's how:
  I looked at the advice of Robert (thanks Robert!) and thinking that it is must be a typo - 64-bit should be Wow, not sys32, just hypothetically.
  So, I checked my Wow folder and found 0 bytes audioeng.dll there as well - I didn't replace yesterday with snached dll, I only replaced front sys32. The same dll is used twice by the system.
  I decided to take the risk to replace with the same dll snached.

  Here are my steps:

  1. Tear off the healthy donor machine DLL
  2. Start the bulb--> cmd with admin permissions
  3. in the command prompt writing
  • takeown /f C:\Windows\SysWOW64\AudioEng.dll
  • ICACLS C:\Windows\SysWOW64\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\SysWOW64\AudioEng.dll
  • takeown /f C:\Windows\System32\AudioEng.dll
  • ICACLS C:\Windows\System32\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\System32\AudioEng.dl

  Make sure you did it in both places.
  Enjoy!

  Thanks a lot for all help.
  I really appreciate it.
  -Irena.

• c:\windows\system32\rasadhlp.dll error message

  c:\windows\system32\rasadhlp.dll error message. Help, please

  Hi stangman95,

  1. when exactly you get the error message?
  2. don't you make changes before the show?

  We recommend that you run system file checker (sfc) scan and check the result. To do this, follow these steps:
  a. visit http://support.microsoft.com/kb/929833
  b. run the scan successfully.
  c. restart the computer so that the changes take effect and check the result.

  If the problem persists, then please provide us with more details, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Run DLL error...

  For a reason unknown to me, I get the following error:

  Run DLL error loading C:user\owner\AppData\Local\Temp\MigAnet.dll

  is not found

  What is happening and what to do?

  Run DLL error loading cannot be found.

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]

• Run dll error: c:\windows\system32\werconcpl.dll

  My computer took a long time to start now, after I entered my password to log on, the screen goes dark forever and finally he said something about a Run dll error: error c:\windows\system32\werconcpl.dll conducting a paging operation and it still doesn't let me start the computer. What is the problem here and how can I solve this problem? Thank you!

  Your PC from a manufacturer of large surfaces, for example Dell/HP and if yes to the first startup, in the first screen before winning, is there an option to run this diagnostic to the?

• Satellite M500 - Missing TosHdpAPI.dll error message

  I recently installed Quicken 2011 and after installation, an error message appeared when the laptop starts:
  Cannot start the application... Missing ToshdpAPI.dll.

  I'm running Windows 7 Pro on a Satellite M500

  I have here a way to get a new copy of this dll?

  Hello

  I searched a bit using Google and it seems that TosHdpAPI.dll belongs to Toshiba Bluetooth software stack but he s strange why it is important for your Quicken program

  In your case I would try to reinstall the Bluetooth software which can be downloaded here:
  http://APS2.toshiba-tro.de/Bluetooth/

  If it doesn t help you should contact the manufacture of the Quicken program. Usually, they should know how you can get rid of this error message. They probably have a patch (update) for this problem.

• Run DLL error Windows 8 on laptops HP 2000

  When starting the laptop of HP 2000 using Windows 8, I get DLL error run there was a problem starting c:\\users\judy\appdata\local\conduit\backgroundcontainer\backgroundcontainer.dll the specified module could not be found.  I installed Norton Security software. I don't know what is this error or how to fix it! Any help would be appreciated! Thank you!

  DLL errors appear when the DLL is damaged, and it gets damaged due to the registry database. When the registry keys concerned is corrupt then it affects the DLL file and so that the error message appears. So to fix this error, you must set the registry key corruption. Apply any registry repair tool and fix DLL errors directly.

• run dll errors

  IM Alfred, not so good to solve computer problems, but I'll give a try.  Im getting this error on startup

  c\user\alfred\appdata\roaming\precp.dll

  module is not found.

  I need to know how to stop this error message, thanks

  IM Alfred, not so good to solve computer problems, but I'll give a try.  Im getting this error on startup

  c\user\alfred\appdata\roaming\precp.dll

  module is not found.

  I need to know how to stop this error message, thanks

  This cannot be a system file or it is not a system path...
  may be that a third party/malware software falsified some startup items

  Here's how to get rid of...

  If there is anything that touches on precp.dll to system tray boot disable it...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths... and keys associated to precp.dll delete

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]