How to create HP recovery disks? (HP Pavilion 500-035ed)

Hello

I have a new desktop HP Pavilion 500-035ed.

Now, I want to create a recovery disc for future use (DVD). I can not find any function on the system.

Anyone know how I can create recovery on one or two DVD discs?

Thanks in advance,

SJW

Hello again,

I just discovered the creation of recovery of CyberLink Media.

SJW

Tags: Notebooks

Similar Questions

  • Re: Satellite L355D - how to create a recovery disk?

    I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

    Thank you

    You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

    Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

  • Satellite Pro A300: How to create the recovery disk

    Hello
    I just bought a Satellite Pro A300 with Windows XP.
    I want to know how I can or if I need to create a recovery disk that will reset the machine to its original state.
    The information gives instuctions on how to proceed for the Vista machines, but not for XP.

    I know that I can recover from the hidden partition, but where this is not possible, I wish I could get CD or DVD.
    There is a recovery CD included product that says only: "MS Windows XP" so I guess that it does not include drivers or Toshiba Software?

    Any help appreciated,
    Thank you
    Mick

    Hello

    You have preinstalled software Toshiba TOSHIBA Recovery Disc Creator?

    Please check this box.
    Using the TOSHIBA Recovery Disc Creator you can create the recovery disk.

    But if your laptop was already pre-installed with Windows XP and then a Recovery CD or DVD must be included.

    Have you checked all of the items in the box?

  • How to create the recovery disk

    Hello

    can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

    Windows 7, 64 bit.

    After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

    but it gives the following error:

    The system repair disc could not be created

    The parameter is incorrect. (0 x 80070057)

    I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

    Help, please.

    Concerning

    Maury

    I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

    FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

    Try these steps and see if it works.

    1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

    2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

    3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

    Note:

    Please backup your files before recovering on the laptop that it would result in the loss of data.

  • Satellite L - how to create a recovery disk?

    Hey,.

    I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.

    Sorry, but why did you uninstall the recovery disk creator?

    However, now you can not create the recovery disk because you have uninstalled the program to create the disc.

    The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.

    Normally you get this message if you start your laptop on first use:

    + Important INFORMATION +.
    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • How to create the recovery disk in Windows 8

    Original title: HELP! I need to know how

    I recently got a laptop HP 2000 for Christmas. She has windows 8, which I'm not too used to it. And I can't understand how or where to go to create a recovery disc for it before you put anything else on my new computer laptop.  How can I do this? Any help would be appreciated.

    Hello

    Recovery of the system and the disk recovery options
    http://Windows.Microsoft.com/en-us/Windows-8/system-recovery-disk

    Create a recovery USB disk
    http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

    How to create a system image to refresh your PC in Windows 8
    http://support.Microsoft.com/kb/2748351

    Some manufacturers have integrated recovery methods to verify with the help of HP, their online
    documentation and ask questions in the forums about known problems.

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    =========================

    While on the screen type start - Help

    Or Win Key Q plus Apps search - help

    Or charms - Search - Apps - Help Menu

    After that the foregoing-> on left click-> Help and Support.

    ==================================

    Solution Windows 8 - left Center - learn more
    http://support.Microsoft.com/GP/Windows-8

    Meet Windows - a good start
    http://Windows.Microsoft.com/en-us/Windows-8/meet

    Get to know Windows
    http://Windows.Microsoft.com/en-AU/Windows-8/basics#1TC=T1

    How-to: get acquainted with Windows
    http://Windows.Microsoft.com/en-AU/Windows/how-to#2TC=Windows8

    Contact: call, tap and beyond
    http://Windows.Microsoft.com/en-AU/Windows-8/touch-swipe-tap-beyond

    Is a free and convenient application available on the Store - Top Free
    "Windows 8 Cheat Keys.
    http://apps.Microsoft.com/Windows/en-us/app/Windows-8-cheat-keys/24f62990-98c7-4c26-95cb-cb09267680e8

    ==================================

    There is no start or the Windows 8 Start Menu button.

    Where is the start menu?
    http://Windows.Microsoft.com/en-us/Windows-8/where-is-start-menu

    Customize the splash screen
    http://Windows.Microsoft.com/en-us/Windows-8/start-screen#1TC=T1

    Windows 8 is not available classic appearance.

    3 third party programs can help:

    StarDock - Debut8 - costs 4.99 $US
    http://www.stardock.com/products/Start8/

    Free

    Classic interface
    http://www.classicshell.NET/

    Pokki
    https://www.pokki.com/Windows-8-Start-menu

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to create the recovery disk from image on another laptop?

    Hi guys,.

    I have a laptop where the recovery partition was reformatted somehow.
    Although I used partition recovery software to recover the original partition, the original system partition containing the Creator program of recovery was also missing.

    I was wondering if just, is it possible to create a recovery disc install creator on another computer Toshiba Recovery disk, extract the image from recovery partition and then create image recovery disc?

    See you soon

    Hello

    Unfortunately, I have to disappoint you. It is not possible.

    I had the same situation after partitioning my hard disk, he disappeared and did not make a recovery disk.
    You can order the new silver recovery disk:
    https://backupmedia.Toshiba.EU/landing.aspx

    or get a copy of Windows and install it. Then, download all the required drivers and enjoy.

  • How to create a recovery disk using external hard drive?

    Is it possible to create the recovery media on an external hard drive instead of using a USB flash drive or an optical medium?

    I was making mistakes when creating the recovery on optical disc media.

    Thank you!

    Hello

    As far as I know it of impossible to create a Toshiba image on HARD drive
    You need burn the image to disk (DVD).

    Welcome them

  • How to create the recovery disk in laptop t430 running Windows 8

    Hi friends,

    I have a laptop preloaded with windows8 T430. I want to create recovery media, but I don't have the application create recovery media must be installed and I can not find available in the downloadable Web site.

    Please suggest me a procedure to create a recovery media for windows 8.

    concerning

    Vinod

    Got the answer.

    http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?AliasID=SF12-D0247

  • HP Pavilion 17 - I was sick, created my recovery disks and a BIG thank you

    After being sick for about 7 days, I was finally able to create my recovery disks on Friday, 1/24.  Everything seems fine except for a couple of pop-ups in the process.  The two pop-up windows had to do with DVD RW drive E one say a word on the listen to what is happening with removable disks and another on plays to see what is happening with the blank discs.  These 2 messages appeared after having burned the first disc, discs later and disappeared before I could answer.  But, I think that the creative process was not serious, because each disk burned correctly, each disc has been verified and message saying something on start-up line was made.

    I also read in my sense that you delete the recovery partition on the hard disk to reclaim space for additional storage.  Is this something rreally what should be done?

    Also my Revovery (D reader says it was modifed 01 24, 2014 at 10:38, file type.)  Why we say that, when I created only the recovery discs?

    In addition, on my HP Support Assistant it said still to creat in 2 sections recovery discs, one in "Updated and developed them, HP messages" in the section «Battery and performance»  I used the printed instructions from HP to create consumer support of discs.  This is - why it still makes its appearance in the HP Support Assistant and I can remove them from there?

    Thanks-Yous of thanks go out to those who have helped me on this site, especially CherylG.

    CherylG, you've been very patient with me for answering all my questions.  I know that I have brought you crazy with some of them!  And I can certainly understand that, but you show no frustration with me in the comments to my questions.  You know, be patient with us, the elderly (laughing while typing this comment).  I know for a fact that I will have that other qustions happen if I can't easily find the answers in the online documents.  I hope that you will help me once again (LOL, laughint outloud here).

    Oh, I noticed the length of time you've been helping people on this forum and the number of responses you have accumulated in this time.  I am very sure that there are many people who have used and still use this forum appreciate your expert help... I know I do.

    Thank you, once again.

    A little encouragement?  I would say that you have provided a lot of encouragement I really needed.  Thank you for your answers to my questions in the post above.  Oh, the information on the HP Wizard program in the manufacture of recovery disks that disappeared.

    Thanks again for your expert advice.

    Take care.

  • Re: Satellite M100-164 - how to get the recovery disk?

    Hi, I have a used Satellite M100-164. (short only model no psma0e)

    Its a M100 changed for the Middle East market as well far as I can tell its basically the same as the European models of M100, except with a smaller hard drive.

    I bought it in a store of play (Computer Exchange in London), but it did not come with a recovery disk.

    Also, I was a little too active pro removing unwanted software of the machine, so I have not installed the Toshiba tools that would be able to create a recovery disk.

    Now I need one because I want to install a bigger hard drive and then re - build the operating system (which is XP)

    * So my question is, where and how do I get a recovery for this notebook drive? *

    I tried to use https://backupmedia.toshiba.eu, but it did not work because the serial number was not recognized (probably because it is a region of the Middle East series no)

    is there another way to get the Toshiba recovery disks? I'm happy to pay a little for one.

    Hello

    In most cases it is possible to get the EPA recovery disc in your country.
    But this is not always possible if the laptop model is too old or abandoned.

    Therefore, get in touch with the ASP guy and ask for more details.
    Maybe you are a lucky man and could get this disc.

    If you will not get this disc, you will need to install the OS by using the MS XP disk.
    Pilots must be placed on the page of Toshiba Europe!

    See you soon

  • Satellite A300D - create a recovery disk

    Hello
    I have a Toshiba A300D. Recently, I installed the version BETA of Windows 7, wiping my installation of Windows Vista on my laptop, now I don't want Windows 7 more and wants to return to Vista. I still have the recovery partition in drive D, but I don't know how to be: create a recovery from this disk or restore using this straight from the trunk. I tried pressing F11 at the Toshiba flash at startup screen, and who just go to a screen that says "Windows could not start...". "etc, I also tried to go to the Multiboot menu and selecting HDD2, and who does not work either.

    So can someone tell me how I can restore back to Windows Vista, I'm not taken worth losing data as I alll backed up on an external hard drive.
    Where can I get the Toshiva Recovery Disc Creator software anywhere?

    Hello

    He's a bad friend... usually it is not possible to restore the laptop on the factory (in the image of Toshiba) settings if you have removed the Vista HARD drive and not create the recovery disk...

    The recovery disk is THIS essential disk and must be created at the beginning!

    But maybe you're a lucky guy...
    I found this thread with a nice tutorial posted by forum user.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=164927&

    I didn't test it and I don't know if it will work, but I think you're last option... otherwise, you will need to order the Toshiba recovery disc.

  • Satellite U400 - failed to create the recovery disk - bad DVD player?

    Hi all

    I have a 13 inch Satellite U400.
    Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

    The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

    My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
    I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

    What can I do? Change something in the registry?
    I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

    So, if someone nows how to work at least one of the problems, please give me advice.

    Thanks in advance,

    wiglip

    Hello

    Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

    And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

    Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
    (1) run Regedit (start-> Run-> Regedit)
    2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
    (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
    (4) restart.

    Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

    Good luck! :)

  • How to create a recovery for TPT 2 disc

    Hello

    I really don't like the idea that my only restore options re' is on the same drive. So, if my drive goes down, I have no recovery option. I tried to create a recovery disk using the tools integrated in Windows, but it error. Other forums say that it can happen with OEMs. So, how can I create a recovery for my TPT2 disc? I have a USB DVD burner

    Hello

    Yep, those are the steps I've tried. Then it gives me an error code 80070057 #. I tried with two different CD/DVD burners to ensure it wasn't a burner problem.

    Now, since the announcement, I found another recovery option that seems to work:

    1. tap search in the bar of charms.

    2. Type "Recovery" and then press on to find settings

    3. click on 'create a disc of Recvovery '.

    4. follow the steps in this wizard.

    This creates a recovery USB disk. I still prefer to have a CD through the utility to backup WIndows 7 and recovery screen, but I hope this recovery USB will work as well.

  • Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

    Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

    Original title: windows xp absence of 3.5 diskettes and Backup Assistant

    Hello JohnAdams2461,

    You're right, that Windows XP requires a floppy drive to create the recovery disk.
    Most newer systems do not have a floppy drive.

    View information in a previous thread with the same question.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

    Best regards, k

    Marilyn

Maybe you are looking for