Run "*.exe" with? (What turns with it).

Similar Questions

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• Black screen - cannot run Explorer.exe with Task Manager

  Hi guys

  I've been Googling the answer to that for the last day and nothing seemed to work.

  Basically, my portable was working fine until this morning, when I restarted. After the home screen, just a rear screen with the mouse. CTRL ALT DEL and everything still works normally. I can run programs with the Task Manager, but can not run explorer.exe. He returned in the process for about 10 seconds then disappears. I think that it is the cause of the black screen. I tried downloading an own explorer.exe and replace the explorer.exe in C:\Windows\. My computer it did not as he said I need the permission of the administrator, but of course, I am the Admin so I don't know what that's all.
  I tried to restart in Mode safe and that works very well, still, I can't replace the explorer.exe in the C:\Windows\ because I do not have the administrative authorization. I tried to change it in the Security tab of the properties, or impossible.
  I also tried to update the driver software graphics cards, checked the Shell in the registry value and made sure it's explorer.exe, used the difficulty of black of Pevx screen, used HitmanPro and Windows Malicious Software Removal Tool to scan and remove malware. I even did a scf/scannow, checked driver C a mistake (which took 3 hours!), let Windows Startup Repair to fix things, tried a system restore but failed. He says that the anti-virus (Sophos) prevented the restoration of the system, so I've temporarily disabled its access scanning on but still unable to restore to a previous (11/01). Program changes that recent such as listed in the system restore is Google + Auto BackUp who came when set Picasa to date there 3 days and a more recent version of Facebook video call I've ever used. I am now running a scan with Sophos, not too promising.
  So yes, I tried everything. I think that now, there are only three options:

  1 somehow replace the explorer.exe in C:\Windows\ with this new cool explorer.exe, which I downloaded, with the permission of the administrator
  2. try another restore of the system, but I'm sure that nothing will happen, already tried three times.
  3 reinstall Windows 7 Edition Home Premium. It will be a real pain.

  So please help me! I have courses of due on Monday and this portable do not let me what that be done. Thank you!!!

  Please ignore the other my long answer. The problem has now been resolved.

  After trying all kind of scans, drinking and sobbing, I came across TDSS Killer from Kaspersky, who managed to catch a 1 latest unique malicious software (that I was too stupid and really looked hopeless and remember the name of), it cures the problem after reboot. Now, the laptop works well like you wouldn't believe. I'm still confused but way too happy now to care. Thanks a lot for your help nevertheless!

• What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages outside the home page.

  What are the original applications for the iPhone 6 s. I had to sync to my iPhone 3g to my new 6s in order to maintain my contacts. Unfortunately, I lost a lot of these new applications. can someone please send screenshots of an iPhone running 6s with applications shown. I need pages other than the home page. Thank you!

  'Stock' apps are part of the installation of iOS and cannot be removed, so there is nothing to verify or prove.

  When you move to a new phone, just need restoring your old backup phone and compatible applications will be synchronized to the new.

• By clicking on any shortcut prompt "what program you want to open (progrem.exe) with? dialog box.

  Hello
  I'm stumped on this one. Whenever you launch any program on the start menu, the command open, run box, the "program would you like to open (progrem.exe) with? appears, example by clicking the shortcut of internet Explorer, invites "which program you would like to open iexplore.exe with? It looks like a file association error but cannot find a list.
  Help

  Hello midryder

  Go here

  12 straight line

  Save the REG file to your hard drive. Double click it and answer Yes to the import prompt.

  .

• When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  When I click on any icon in my control panel, a black window opens and C:WINDOWS\system32\rundll32.exe is what's wrong with the system

  {Assuming the rundll32.exe file is not found}

  See if them can restore the file rundll32.exe:
  http://support.Microsoft.com/kb/812340 Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Why does'nt windows developed defender running automatically with windows 7?

  Why does'nt windows developed defender running automatically with windows 7?

  Hi GRL999,

  Welcome to the Microsoft Answers site.

  You can add, delete, enable, or disable a startup program in windows 7. Follow the steps mentioned below.

  Method 1:

  1. open the settings menu of the program.

  2. Add the program to the startup -

  Select the type option to run at startup of the program.

   

  3. to remove the startup - program

  Deselect the option type to run at startup of the program.

  Method 2:

  1. right click on the exe of the program to run at startup, or opening at startup and click create a shortcut.

  NOTE: This is the shortcut you add to the folder of boot Option one or Option two below. Skip this step if you only remove a shortcut from the startup folder.

  Single user:

  NOTE: The startup of the single (current) user folder is a hidden phone folder to the:
  C:\Users\(user-name) \AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click Open or Explorer or in the line of the Start Menu search box, type : startup of the shell and press enter.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

   

  For all users:

  NOTE: The startup folder all users is a hidden system folder:
  C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup

  2. open the Start Menu.

  3. click on all programs, right-click on the Startup folder and click open all users , or to explore all users.

  4. to add a startup program or file shortcut - drag the shortcut created in step 1 in the startup folder and drop it.

  5. to remove a boot program or file shortcut - right click on the shortcut in the startup folder and click Remove.

  6. close the startup folder when finished.

  Method 3:

  1. open the Start Menu.

  (A) in the search line, type msconfig and press enter.

  or

  (B) open theControl Panel (all items view) and click the Administrative Tools icon, and then click System Configuration. Close the control panel and the windows administrative tools.

  2. If prompted, click on continue for UAC prompt or type the administrator password.

  3. click on the Startup tab.

  4. to disable a startup - program

  (A) select a listed startup program and uncheck the box.

  (B) repeat to disable more listed startup programs.

  5. to allow a startup - program

  (A) select a listed startup program and check it.

  (B) repeat to allow more listed startup programs.

  6. to turn off all startup programs listed -

  (A) click the disable all button.

  (B) proceed to step 9.

  7. to enable all startup programs listed -

  (A) click the enable all button.

  8. click on apply and OK.

  9. click on the button to restart to apply.

  Note: This will restart your computer immediately. Save and close everything you are working on the first.

  For more information about Windows Defender, see the items listed below.

  Enable or disable the Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender real-time protection

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Defender-real-time-protection-on-or-off

  Schedule when Windows Defender scans your computer http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-when-Windows-Defender-scans-your-computer

  Using Windows Defender

  http://Windows.Microsoft.com/en-us/Windows7/using-Windows-Defender

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• bcmwltry.exe with / DLL initialization failed in windows xp

  I write a question on behalf of the client. Here's the problem of the customer:

  Playing Cityville Facebook my laptop crashes every time with the following problem, bcmwltry.exe with / DLL initialization failed. I don't know what it is or how to fix it?

  Hello
   
  ·         How long have you been faced with this problem?
  ·         Did you do changes on the computer before the show?
  ·         The problem happens only when playing Cityville Facebook?
   
  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.
   
  Go to the Task Manager and stop the process, or it will consume memory and can cause your computer down.
  To complete the process in the Task Manager, follow these steps:
   
  a. press the keys Ctrl + Alt + Delete , and then select the Task Manager
  b. end of the process(bcmwltry.exe) running in the background
   
  You can also consult with Broadcom for additional help.
   
  Hope this information helps.

• Executing an .exe with a SWF file. ?

  Hey.

  I was wandering if it is possible to run an .exe with a flash swf file file. When you click on a button?

  If it is then someone would be nice enough to tell me what I have to use the code please?

  I would like to use it with the button symbol.

  Thank you

  ~ Joe

  This should be:

  Stop();

  Btn.addEventListener (MouseEvent.CLICK, f);

  function f(e:Event):void {}

  fscommand ("exec", "psxfin.exe")

  }

  p.s. Please check the useful/correct.

• 6730 b DEATH - only runs connected with no battery

  6730 b DEATH - only runs connected with no battery

  If I insert the battery while it is running connected, the PC will immediately dead.

  Any help on disgnosing what is the problem would be appreciated.

  Logic for me.  Thank you.  I'll post the results once I have buy and install a new battery.

• When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.

  Silverlight.Configuration.exe

  When I click on before sending a message, I get a screen 'Silverlight.Configuration.exe' with an allow / do not allow permission.  I am also warned that it is outside

  My protection.  Recently started to receive emails of some of my address book to stop sending advertisements.  (which I did anyway)

  What is happening and is involved with Silverlight, you have an idea?

  Hello

  . What mail client do you use?

  . When was the last time it was working fine?

  . What antivirus software you use in your system?

  . Did you do recent changes with the hardware or the software before the show?

  Method 1: A clean boot helps eliminate software conflicts. Visit the link to learn how to perform a clean boot: http://support.microsoft.com/kb/929135

  Note: once the troubleshooting is complete, reset the computer to start as usual.

  Method 2: Also uninstall and reinstall Silverlight and check if it helps:

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• Script to run Python with EEM on Nexus 9K

  Hello!

  I am trying to run the example provided in the following link for "Running Scripts with Embedded Event Manager":

  http://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/nexus9000/SW/6-...

  Here is my configuration of the Nexus 9 K switch EEM:

  NX9K-autonomous-Pod-1 # sh run EEM

  ! Command: show running-config EEM
  ! Time: Sat Nov 15 09:54:52 2014

  version 6.1 (2) I3 (1)
  Event Manager applet a1
  cli event corresponds to "display the clock.
  Action 1 cli python bootflash:pydate.py
  2 default event action
  Action 3 syslog msg I like EEM

  And here is an example of work of pydate.py that I grabbed from GitHub:

  GitHub Repo: https://github.com/haya14busa/pydate/blob/master/pydate.py

  NX9K-autonomous-Pod-1 # python bootflash:pydate.py
  DATETIME = 2014-11-15 09:47:03
  TIMESTAMP = 1416044823
  DateTime: 2014-11-15 09:47:03-> TimeStamp: 1416044823
  TimeStamp: 1416044823-> DateTime: 2014-11-15 09:47:03
  NX9K-autonomous-Pod-1 #.

  Finally, here is what happens when I run the command 'See the clock' in an attempt to trigger the EEM applet:

  NX9K-autonomous-Pod-1 # sh clock
  09:54:58.746 UTC Saturday, November 15, 2014
  NX9K-autonomous-Pod-1 # 2014 Nov 15 09:54:58 NX9K-autonomous-Pod-1% VSHD-5-VSHD_SYSLOG_CONFIG_I: configured for the vty by admin on vsh.8883
  2014-15 Nov 09:54:58 NX9K-autonomous-Pod-1% VSHD-5-VSHD_SYSLOG_CONFIG_I: configured for the vty by admin on vsh.8894

  Any help is appreciated!

  The syslog message must come before the 'event' by default.  As for what the Python script prints, it won't happen when she is called to the EEM.  But you may like the Cisco.com article says, look at the log to make sure that the script ran.

• Debug a tuxedo that is running server with dbx

  Hi all
  
  I'm triying to debug a server running Tux with dbx, calling one of its services by using a Java client. I've read (Re: gdb - problem of debugging and Re: Service Tuxedo in C/C++ debugging but I can't solve my problem with them.) These are the steps I followed:
  
  (1) the server normally with tmboot starts:
  
  / Applications/Atos/CRPR_RESI/bin > tmboot s ac_reAdmXaGesNegocioS_ext_V1000
  INFO: Oracle Tuxedo, 10.3.0.0, 64-bit Version, Patch level (none)
  
  The server process starting...
  
  exec ac_reAdmXaGesNegocioS_ext_V1000 - R:
  process ID = 10813652... Has begun.
  1 started process.
  
  (2) copy the sorce file in the binary directory, sort of dbx can associate the lines.
  (3) attach dbx to the PID of the server:
  
  / Applications/Atos/CRPR_RESI/bin > dbx - one 10813652
  Waiting for an attachment to the 10813652 process...
  Attached successfully to ac_reAdmXaGesNegocioS_ext_V1000.
  Help, type 'help '.
  reading symbolic information... attention: ac_reAdmXaGestorNegociosS_ext.cpp is newer than ac_reAdmXaGesNegocioS_ext_V1000
  
  order in msgrcv to 0x9000000001d1a10 ($t1)
  0x9000000001d1a10 (msgrcv + 0xb0) e8410028 ld r2, 0 x 28 (r1)
  (dbx)
  
  (4) I don't know why it automatically stops at "msgrcv"?. Anyway, I put a breakpoint on the line at the start of my service:
  
  (dbx) stop at 13930
  [1] stop at the "ac_reAdmXaGestorNegociosS_ext.cpp": 13930.
  (dbx) list 13919, 13935
  13919 //{{IDL_HEADER(ac_re_ctrlversion_consulta)
  13920 Sub ac_re_ctrlversion_consulta::Implementation)
  13921
  13922 NAMESPACE (ac_resp_st_gestor_negocios_ext2) ac_re_st_ctrol_versiones filtro_entrada
  13923, namespace (ac_resp_st_gestor_negocios_ext2) ac_re_st_ult_ctrol_versiones * estruct_paginado
  13924, RPRInt16 * num_Items
  13925, namespace (ac_resp_st_gestor_negocios_ext2) ac_re_st_ctrol_versiones * lista_regsalida
  13926, RPRUbyte * pcHayMas
  13927)
  }} IDL_HEADER (ac_re_ctrlversion_consulta) 13928
  {13929
  Traza 13930 ("* INICIO DEL SERVICIO OF CONSULTA EN AC_CTRLVERSION *");
  13931 Traza("***DECLARACIONES***");
  13932 RProcRAccess VAC;
  Cursor 13933 & c_consulta = * VAC. GetCursor();
  13934 DateTime date;
  13935
  (dbx)
  
  (5) I call via the Java client, and the client blocks... waiting for the service. I do 'Steps' dbx:
  
  step (dbx)
  
  Signal defined by user 1 to msgrcv to 0x9000000001d1a10 ($t1)
  0x9000000001d1a10 (msgrcv + 0xb0) e8410028 ld r2, 0 x 28 (r1)
  step (dbx)
  order Uintercept to 0x900000007ba2850 ($t1)
  0x900000007ba2850 (Uintercept) fbe1fff8 std r31,-8 (r1)
  step (dbx)
  < in this point frezees dbx, the service and the client Java resumes >
  
  (6) it is truncated the service log:
  
  [24/01/2012 11:48:31] WARNING: no rpr_srv_version specified
  [24/01/2012 11:48:31] Service AC_RE_CONSULVER (IN) - < size = 4096, Version = 627632180, Flags = 0 >.
  [24/01/2012 11:48:31] #1 - RPR_NTVVAR = {.}
  [24/01/2012 11:48:31] #2 - RPR_NTVVAR = {.}
  [24/01/2012 11:48:31] #3 - RPR_SHORT = 1
  ...
  [24/01/2012 11:48:31] Service AC_RE_CONSULVER (FATE) - < size = 1672, Version = 627632180, Flags = 0 >.
  [24/01/2012 11:48:31] #2 - RPR_NTVVAR = {.}
  [24/01/2012 11:48:31] #3 - RPR_SHORT = 0
  [24/01/2012 11:48:31] #4 - RPR_NTVVAR = {.}
  [24/01/2012 11:48:31] #5 - RPR_CHAR = 78
  
  (7) I have to press CTRL + C on dbx:
  
  < CTRL + C >
  Interrupt in msgrcv to 0x9000000001d1a10 ($t1)
  0x9000000001d1a10 (msgrcv + 0xb0) e8410028 ld r2, 0 x 28 (r1)
  (dbx)
  
  (8) it goes back to normal and when I leave, the PID of the server has changed, and the former appears at the end of the command line of servers behind the parameter-R. I don't know what that means:
  
  quit smoking (dbx)
  / Applications/Atos/CRPR_RESI/bin > ps - ef | grep ac_reAdmXaGesNegocioS_ext_V1000
  Atos 6860940 10399980 0 11:53:28 pts/15 0:00 grep ac_reAdmXaGesNegocioS_ext_V1000
  Atos * 7163938 * 1 4 11:53:26 - 0:00 ac_reAdmXaGesNegocioS_ext_V1000-C dom = 5 RESI_DOMAIN_CSTR_EVR g-i 911 u tdea3p02_maclan/applications/atos/CRPR_RESI/release/ULOG_AC_RE - U m 0 10813652 r
  / Applications/Atos/CRPR_RESI/bin >
  
  (9) the internal logic of the service is not performed correctly, when dbx is used, because there is no data on the output. But it works properly without attached dbx.
  
  I think I did wrong to somenthing (or many things wrong :)), but I am lost at this point. Any advice will be appreciated.
  
  Thank you
  Gabriel

  Hi Gabriel,

  don't know if this qualifies as a related smoking question and I'm a little lost in all these lines, but...

  ... When you attach dbx to a process, it will become annexed by dbx (normal behavior) and you start to go through the instructions (machine code) using 'step', but I would (probably) use "cont (inue)" instead giving control to the process rather (based on what you really want to)

  Good luck
  Kristian

• Cannot see/Run JCarousel with FireFox

  Cannot see/run JCarousel with Firefox.

  I am able to see the main image and the images over the primary image line; but the javascript code which changes at each successive image does not work.

  I can't run any JCarousel with FireFox. National Geographic is just one example of the most recent which does not work.

  You have quite a few extensions you installed that can cause problems like that (Adblock Plus, Ghostery).

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  • If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.