run the dll on startup error

Similar Questions

• You try to run the backup under Vista, error 800704 3

  My computer uses windows vista Home premium. When I try to run a backup I get error code 800704 3. I don't know what is this error, anyone know and how to fix it.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• c:\windows\system32\nvcpl.dll at startup error.

  I get a c:\windows\system32\nvcpl.dll on Win 7 start up. How can I remove it please?

  Please advise?
   
  Original title: c:\windows\system32\nvcpl.dll error

  Hello Clive,.

  Thanks for choosing Microsoft Community.

  What is the complete error message you get?

  C:\windows\system32\nvcpl.dll corresponds to the NVIDIA drivers or any NVIDIA product. While the research with the Dll file that I fell that this could occur when drivers are not updated or if they are damaged.

  You can try the following methods and check if it works:

  Method 1: turn on the computer in start state clean and check to start the giving questions.
  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135     
  Note: See "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  Method 2:
  You can uninstall the card readers NVIDIA graphics and the software of the system and then download the driver and see if the problem is resolved.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

   
  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Run the fix it tool error center "Troubleshooting cannot continue because an error has occurred."

  Original title: run fix it tool center

  When I download a Microsoft fix it center tools I get following error message when I try to run the program after downloading

  TROUBLESHOOTING CANNOT CONTINUE BECAUSE AN ERROR OCCURRED SAID WERE SORRY, BUT THE PROGRAM HAS ENCOUNTERED AN ERROR TRYING TO CONNECT TO THE SEREVER 8007273DJ CODE

  Hi Dave,.

  Please send this query to Microsoft Fix it Center Forums. The forum is used to post those on the Microsoft Fix it Center automated troubleshooting tool.

  http://social.Microsoft.com/forums/is/fixitcenter/threads

• Install HRCS9.0 with Linux question: run the script hrcs90ora.dms error

  People,

  Hello. I install HCM and Campus Solution 9.0 with Internet Architecture PT8.53/WebLogic11g/Tuxedo11g/OracleDataBase11g.

  My macine server is Oracle Linux 5.10 and Windows XP-based Client computer.

  In the Oracle database Linux 5.10 Server machine, what instance HRCS90 configuration, select Demo or system, the next step "select PeopleSoft Applications" has only a single element:

  (1) PeopleSoft HRCS Demo Database - US English.

  I select this option to run the Wizard "setup.sh" that alters the scripts 'createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql. Then I executed 7 SQL scripts > one by one in Linux. Then need to load Windows XP data in the Oracle Linux 5.10 DB HRCS90 instance.

  
  After you have installed the Windows of HCM and Campus Solution 9.0 version in Windows XP with PT8.53 and log in Data Mover, I create the hrcs90ora.dms script, there's a step like below:

  Select the PeopleSoft Application
  (1) PeopleSoft HRCS Database - US English
  (2) PeopleTools System Database - US English

  I select "PeopleSoft HRCS Database - English American". When run the hrcs90ora.dms script, the error message as below:

  
  Release of Data Mover: 8,53
  Database: HRCS90 (ENG)
  Input file: C:\PT8.53\data\hcengs.db (ENG)
  Import AAP_ETHNIC_PMPT
  Import AAP_ETHNIC_PMPT 0
  Update statistics for AAP_ETHNIC_PMPT
  The remaining records: 21003
  Import AAP_TBL
  Create Table AAP_TBL
  Import AAP_TBL 0
  Indices of real estate required for AAP_TBL
  -SQL error. Position of the error: return 66: 959 - ORA-00959: tablespace "PSINDEX" does not exist
  
  UNIQUE INDEX CREATE PS_AAP_TBL WE PS_AAP_TBL (ESTABID) TABLESPACE PSINDEX STORAGE (40000 INITIAL FOLLOWING 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PARALLEL NOLOGGING
  Error: Unable to process create for AAP_TBL statement
  Spaces SQL: 0 tables: triggers 1: index 0: 0 views: 0

  Unsuccessful end

  
  But when again, run the hrcs90ora.dms script, the error is a party for the current record and goes to the next record. I ran the scripts 10 times and get the following result:

  
  Release of Data Mover: 8,53
  Database: HRCS90 (ENG)
  Input file: C:\PT8.53\data\hcengs.db (ENG)
  Import AAP_ETHNIC_PMPT
  Import AAP_ETHNIC_PMPT 0
  Update statistics for AAP_ETHNIC_PMPT
  The remaining records: 21003
  Import AAP_TBL
  Import AAP_TBL 0
  Update statistics for AAP_TBL
  The remaining records: 21002
  Import AAP_TBL_LNG
  Import AAP_TBL_LNG 0
  Update statistics for AAP_TBL_LNG
  The remaining records: 21001
  Import AAP_YEAR
  Import AAP_YEAR 0
  Update statistics for AAP_YEAR
  The remaining records: 21000
  Import AAP_YEAR_GOALS
  Import AAP_YEAR_GOALS 0
  Update statistics for AAP_YEAR_GOALS
  The remaining records: 20999
  Import AAP_YEAR_JG_GLS
  Import AAP_YEAR_JG_GLS 0
  Update statistics for AAP_YEAR_JG_GLS
  The remaining records: 20998
  Import AAP_YEAR_JOBGRP
  Import AAP_YEAR_JOBGRP 0
  Update statistics for AAP_YEAR_JOBGRP
  The remaining records: 20997
  Import AA_COMPARE_JPN
  Import AA_COMPARE_JPN 0
  Update statistics for AA_COMPARE_JPN
  The remaining records: 20996
  Import AA_CONV_JPN_AET
  Import AA_CONV_JPN_AET 0
  Update statistics for AA_CONV_JPN_AET
  The remaining records: 20995
  Import AA_COST_RT_JPN
  Import AA_COST_RT_JPN 0
  Update statistics for AA_COST_RT_JPN
  The remaining records: 20994
  Import AA_CR_EFFDT_JPN
  Create Table AA_CR_EFFDT_JPN
  Import AA_CR_EFFDT_JPN 0
  Indices of real estate required for AA_CR_EFFDT_JPN
  -SQL error. Position of the error: return 103: 959 - ORA-00959: tablespace "PSINDEX" does not exist
  
  UNIQUE INDEX CREATE PS_AA_CR_EFFDT_JPN WE PS_AA_CR_EFFDT_JPN (EMPLID, EMPL_RCD, EFFDT DESC) TABLESPACE PSINDEX STORAGE (40000 INITIAL FOLLOWING 100000 MAXEXTENTS UNLIMITED PCTINCREASE 0) PCTFREE 10 PARALLEL NOLOGGING
  Error: Unable to process create for AA_CR_EFFDT_JPN statement
  Spaces SQL: 0 tables: triggers 1: index 0: 0 views: 0

  Unsuccessful end

  My questions are:

  First of all, means "PeopleSoft HRCS Demo Database" in Linux and "PeopleSoft HRCS database" in Windows causes the error above? How to solve the error above?

  Secondly, when I created PeopleTools 8,53 Database Instance PT853, I'm not running the 'ptddl.sql' script, which creates many storage areas. It causes the error above? I need to run "ptddl.sql" for example PT853?

  
  Thank you.

  Probably, you set the init parameter db_files too low. As I remember, it is recommended and default to 1024 1021 on the Peoplesoft database. This is a static setting, change the value and it will restart the database.

  Nicolas.

  Post edited by: Nicolas.Gasparotto

• the DAC server startup error message

  Hi all
  
  I'm trying to start the server on my linux machine. I saw the following message. Can someone help me understabd what that error message...
  
  ./StartServer.sh
  Detected OS: Linux
  December 6, 2009 01:13:17 com.siebel.etl.engine.core.ETLUtils logException
  SEVERE:
  FAULT INFO:
  An exception has occurred. Stop the server...
  EXCEPTION CLASS: java.lang.ExceptionInInitializerError
  
  com.siebel.etl.net.QServer.setSpill(QServer.java:159)
  com.siebel.etl.net.QServer. < init > (QServer.java:84)
  com.siebel.etl.net.QServer.main(QServer.java:420)
  
  : CAUSE:
  No MESSAGE: Application Manager initialization
  EXCEPTION CLASS: com.siebel.etl.bootup.ApplicationManagerInitializationException
  
  com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:157)
  com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
  com.siebel.etl.bootup.ApplicationManager. < clinit > (ApplicationManager.java:62)
  com.siebel.etl.net.QServer.setSpill(QServer.java:159)
  com.siebel.etl.net.QServer. < init > (QServer.java:84)
  com.siebel.etl.net.QServer.main(QServer.java:420)
  
  : CAUSE:
  MESSAGE:::/ad62/DAC/conf/server.properties (no such file or directory)
  EXCEPTION CLASS: java.io.FileNotFoundException
  
  java.io.FileInputStream.open (Native Method)
  java.io.FileInputStream. < init > (FileInputStream.java:106)
  java.io.FileInputStream. < init > (FileInputStream.java:66)
  com.siebel.etl.bootup.ApplicationManager.initFileSource(ApplicationManager.java:151)
  com.siebel.etl.bootup.ApplicationManager.initSysProps(ApplicationManager.java:79)
  com.siebel.etl.bootup.ApplicationManager. < clinit > (ApplicationManager.java:62)
  com.siebel.etl.net.QServer.setSpill(QServer.java:159)
  com.siebel.etl.net.QServer. < init > (QServer.java:84)
  com.siebel.etl.net.QServer.main(QServer.java:420)
  December 6, 2009 01:13:17 com.siebel.etl.net.QServer < init >
  SEVERE:
  Stop the server...

  Just in case someone is looking to this post and hoping for the right answer, the solution is the following:

  1 make sure that your sweat Informatica can correctly run the pmrep or the pmcmd since the base directory, etc. If the Informatica user cannot then chances are that the DAC user will not be able to either. Anyway for the DAC or Informatica user check the following two points.

  2. make sure that the full path to the directory server/bin/INFA_HOME is placed in the PATH variable.
  3. make sure that the full path to the directory server/bin/INFA_HOME is placed in the LD_LIBRARY_PATH variable.

  Modify the bash_profile, profile etc. file and then run the profile file after you save the file by running,
  . ~/.bash_profile
  or similar to the command line.

  Re-attempted execution of pmrep or pmcmd and you should have no more problem.

  In addition, if the DAC user is having this problem, the user profile file or the files dac_env.sh profile var parameters above so mayrequire correctly to connect to pmrep and pmcmd. Check that this file looks consistent as well. If you change the profile file, you will need to re-run the it. If you change the file dac_env.sh, you must restart the server DAC.

  I hope this helps.

  See you soon,.
  Christian
  http://www.artofbi.com

• Cannot run the file due to error message 'D3dx9_38.dll' is missing or damaged.

  Hello

  I need help...  I am currently using a third party games emulator and I couldn't run my ROM because of this message "D3dx9_38.dll is missing or damaged.

  It's something that happened to me a few months ago and I was able to solve this problem with a fix it... But I could not find this fixit no matter how or where I searched the Internet...

  The problem is not with the emulator games but rather with the 'Fix It' in question...  Can you help me to solve it?   I used it only, 2 months ago but I don't no the bookmark...

  All I know is that it is a real "Microsoft Fix It', that will repair/replace the point on the error message and that, once downloaded the fix, it has a" Green, stylized X "on it and it will fix all your dll Articles

  (I think...)

  Sorry I can't be of more help... I'm not looking for the fix it here o community and I couldn't find it.

  I would like to know,

  Thank you.

  Hello

  This file is part of the DirectX Runtime June 2010, which is an optional update that needs a lot of games.

  Even my Lexmark printer requires...   I'll include a link to the full installer...

  This is a package to free extraction. It will extract after double-clicking it so be sure to note the location where extracted you\it.

  Open the folder, and then double-click DXSETUP.

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

• Cannot run the Windows backup utility, error: "a file already exists (0X800700B7)."

  I have a Lenovo Think Pad with Windows Vista.  When I try to back up the computer, I choose backup and the location of tools accessory system configuration.  Then I run a backup to start and identify a DVD RW as the location of the backup files.  I click to start and a screen pops up saying

  A file exists already (0X800700B7), and at this time it cannot be saved.

  OX800700B7 is not a file name. It is an error code.

  What follows is a response to the same problem. The person who had the problem was using 64-bit. But that makes no difference in this case. Follow th step by step posted by ABC_george and see if that fixes the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-backup-cannot-create-a-file-when-that-file/d91d7785-9a00-4b26-9ae3-ae35b0d9317b

• Cannot run the Advisor to upgrade error: 0x900700a4

  Original title: Error code: 0x900700a4

  Try to get Upgrade Advisor to run.  in tempting the recommended fix, I got the following error:

  Error:

  Code = 0x900700a4

  Description = either of threads that can be created in the system.

  Installation = Win32

  Hello

  1. where exactly are you trying to install?

  Unfortunately, the Adviser to update for Windows Vista is so more available.

• Illegal state Exception when running the code at startup

  Here's my main method:

      public static void main(String[] args)
      {
          if (args.length == 1 && args[0].equals("startup"))
          {
              Criteria locationCriteria = new Criteria();
              locationCriteria.setCostAllowed(false);
              LocationProvider mlocationProvider;
              Location mLocation = null;
              try
              {
                  mlocationProvider = LocationProvider
                          .getInstance(locationCriteria);
                  mLocation = mlocationProvider.getLocation(-1);
              }
              catch (LocationException e) {
              }
              catch (InterruptedException e) {
              }
              QualifiedCoordinates mQC = mLocation.getQualifiedCoordinates();
          }
          else
          {
              MyApp theApp = new MyApp();
              theApp.enterEventDispatcher();
          }
      }
  

  The method

   mlocationProvider = LocationProvider.getInstance(locationCriteria); 
  

  throws the illegal state exception

  When I check the debug information, I found this exception are thrown to the line when he calls Application.getApplication ();

  When I move this code to run in a normal life to screen it works fine. !

  Any help?

  There may be a number of issues here:

  (1) until your Application is actually running, you can't really do any processing.  Your Application does not start running until you

  'enterEventDispatcher() '.

  Hand, all you should do is instantiate your Application.  Manufacturer of your Application should not do anything complicated either, since it works as part of main().

  You can do some activities, for example to add listeners, in main() code that is, in some respects, unfortunate because it lulls people into thinking they can do anything.  ,

  (2) get the location as you do, is a blocking call.  If you need to do it on a background Thread.  You c a get away with that on the Simulator because GPS simulated returns immediately with a location.  So it does not actually block.  But on a real device, code as you can force your application to break.

  (3) you seem to try to do something in the commissioning.  You must be aware, this start-up up is called as part of the start-up of the device and before the unit is fully active.  In fact, I think on a real device that this code will fail because the device is not ready to provide a location in the beginning upward.

  You will find find article, informative and useful for (1) and (3).

  http://supportforums.BlackBerry.com/T5/Java-development/write-safe-initialization-code/Ta-p/444795

  I suspect you want to start and get a location at first upward, in which case you might find this useful:

  http://supportforums.BlackBerry.com/T5/Java-development/create-a-background-application/Ta-p/445226

• The MDS Server startup error

  I cannot from the MDS Server. I have the following error:

  Could not find the main class: net.rim.application.ipproxyservice.IPProxyserviceApplication. Program will exit.
  

  I'm running Windows 7 x 64 with Java 1.6.0. Any suggestions are greatly appreciated.

  Where do you have the MDS Server installed?

  I recommend you to install somewhere where there is no protection of UAC files... a good target would be C:\BlackBerrry

• "Error message when you run the action through droplets ' error: no item of this type.

  Whenever I run an action via a droplet, I receive the error message after the image has been processed "error: no element of this type" on average, it appears 3 times by image and I have to continue to press the return key to get rid of the message.

  The action that the drop is based on works fine within photoshop.

  This drop was working fine until the last update and I have used it for years. I reinstalled Photoshop (CC 2015.1.2) and re-created the action and droplets but still having the same problem.

  The action is very simple change RGB to CMYK, change dpi to 300 DPI and save as a file .psd format

  The original file that I am conversion types .jpg, .png and .tif

  Gout is saved to the desktop and light the processed files in a folder on the desktop.

  You can try to reset Photoshop back to default preferences.

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  If the step above have not, then uninstall the application, restart your machine and reinstall from creative cloud desktop application.

  Kind regards

  Mohit

• Run the file LoadXML_XACM.sh error

  Hello friends:
  I have a query:
  Currently, I have installed Oracle Identity Manager 9.1.01 and I do the upgrade to version 9.1.0.2.
  When you load the LoadXML_XACM file, I got the following error: how I can solve this problem.
  
  $ Sh LoadXML_XACM.sh jdbc: oracle: thin: @ idm10: 1521: IDM
  / opt/jdk1.6.0/bin/java-cp / opt/oim/xellerate/ext/ojdbc14.jar: / opt / IOM / xellerate / lib / Oracle com.thortech.xl.util.LoadXML xlUtils.jar oracle.jdbc. pilot. OracleDriver jdbc: oracle: thin: @ idm10: 1521: idm REP REP_CODE UserAccessHistory REP_XML_META... / metadata / UserAccessHistory.xml
  Exception in thread "main" java.lang.NoClassDefFoundError: com / thortech / xl / util / LoadXML
  Caused by: java.lang.ClassNotFoundException: com.thortech.xl.util.LoadXML
  in java.net.URLClassLoader $1. run (URLClassLoader.java: 202)
  at java.security.AccessController.doPrivileged (Native Method)
  to java.net.URLClassLoader.findClass (URLClassLoader.java: 190)
  at java.lang.ClassLoader.loadClass (ClassLoader.java: 307)
  to Sun.misc.Launcher$appclassloader $ AppClassLoader.loadClass (Launcher.java: 301)
  at java.lang.ClassLoader.loadClass (ClassLoader.java: 248)
  
  
  Thank you

  Set your classpath appropriately.

  -Kevin

• dll on startup error up to... c:\programData\displaypolicy\notifier.dll

  I get this error at the beginning upward.  How can I fix the problem?

  Hello

  1. you did it before the issue of any material changes or software?
  2. What is the exact error message?

  Step 1: Start your system in safe mode. Check if you are facing the similar question in safe mode.
  To start your computer in safe mode through the article mentioned below.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If safe mode works fine, start your system in clean boot mode. Check if you are facing the similar question in this mode as well.
  Try now to the KB article to perform the clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

• Error when running the report EN

  I created a financial report for the HFM application, but when I try to run the same it gives error dirver ADM.
  
  I even restart all services. But the same error.
  
  Any help will be appreciated

  This error is not related to the Services. Is that you installed the HFM client on server EN? Customer HFM automatically installs the driver required for the EN to connect to HFM.

  Varun