dll on startup error up to... c:\programData\displaypolicy\notifier.dll

Similar Questions

• Solution for the startup error on siymnctm.dll

  Under Windows XP, Service Pack 3, startup error: error loading C:\WINDOWS\System32\siymnctm.dll.  Any ideas how to fix?  BTW, Microsoft Knowledge Base was unavailable for research today.

  Thanks for any help.

  A Google search for "siymnctm.dll" grew nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Startup error: unable to load file or assemblyl

  I get this error message when you try to open my software:

  Startup error: could not load file or assembly 'System.configuration, Version = 2.0.0.0, culture = neutral, PublicKeyToke = b03f5f7f11d50a3a' or one of its dependencies. The system is unable to remove the specified file.

  I tried to clean .net and re - install, but I still get this error.

  Anyone know why?

  Try a system restore before the problem started:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If it does restore before installing the updates, try to install the updates one at a time to see if there is a conflict and hide the update if necessary.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• TFLN startup error: class 'net.rim.blackberry.api.homescreen.HomeScreen' not found

  I am beta testing my app and it works fine for me in all simulators and a 9530 Storm. But one of my beta testers reported the app doesn't launch and gets the error:

  TFLN startup error: class 'net.rim.blackberry.api.homescreen.HomeScreen' not found

  I can't imagine how that could happen. Any ideas? Thanks in advance.

  DentateGyrus wrote:
  The user's phone is "BOLD" with the OS update for it. He didn't give me a version number, but I guess than 4.6. It was compiled in 4.7, but works perfectly well in the "BOLD" Simulator.

  An application built in version 4.7 is not compatible on the 4.6 version.  Please refer to the following.

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800901/What_Is_-_Appr...

• RMAN-04017: description of the startup error: ORA-32004: obsolete parameters or obsolete er (s) specified for the instance of RDBMS

  Dear all,

  While making the cloning of RMAN using the command duplicate in 11.2.0.3 database with ebs.

  We receive the error below

  connected to the auxiliary database (not started)

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 03/07/2015 15:12:07

  RMAN-06403: could not get a fully authorized session

  RMAN-04006: auxiliary database error: ORA-24327: need explicit attach befor

  e a user authentication

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-04014: failed to start: ORA-03113: end of file on communication channel

  RMAN-04017: description of the startup error: ORA-32004: outdated or obsolete parameters

  ER (s) specified for the instance of RDBMS

  Kind regards

  Villi Kumar

  Dear all,

  We have corrected the problems.

  Solution:

  To the bottom of the database

  Comment this parameter and re try

  =====================================

  oratest@ctsst $ grep-i local initerptest.ora

  #local_listener = erptest_LOCAL

  oratest@ctsst $

  Test the issue again.

  Concerning

  Villi Kumar

• Receiving an error on startup error: C:\Program Data\sytem 32\gameux.dll is not designed to run on Windows or it contains an error

  * Original title: error gameux.dll

  I recently got an error on startup associated gameux.dll.

  "C:\Program Data\...\gameux.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or your system administrator or the software vendor for support on the contracts. »

  Later, I discovered that my Norton 360 had quarantined the gameux.dll file a few weeks ago marked as high risk Trojan horse.  After scanning this file in the folder of Norton 40, it seems, is not a problem and was not actually a virus.  Then I looked in the windows System 32 folder and found that the file gameux.dll is actually still there.  Maybe repeuple Windows there.  Unfortunately, it doesn't seem to work.  Maybe an incompatible version.

  I tried to put the old file in System 32, but ran into problems of owner "TrustedInstaller", which I didn't change without a little guidance.

  Any ideas where I should go from here?

  Thank you!

  Dell Precision T1500

  Windows 7, 64-bit

  I don't know if you saw my post updated, but I'm sure that this question arises from Norton 360 brand gameux.dll file as a virus.  It quarantined the file.  Apparently repeuple Windows the Windows\System32 folder with a new file gameux.dll

  I think that some programs may have been pointing to the old file gameux.dll quarantined.  Norton, he was put in a hidden folder in c:\programdata.

  In any case, I deleted this version put in quarantine to gameux.dll and problem solved.  No more error on startup!

• Startup error message: error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  Nice day

  I sent my computer to be restored and cleaned of the virus. (Computer HP with Windows XP, Service pack 3)

  Error message appeared after about third computer startup.

  Error loading of C:\ WINDOWS\azizoqocefuwejat.dll

  The specified module could not be found.

  Unplugged the computer and set it aside for a fight a year.

  Not dusted him off and in the hope to use again.

  Removed all kinds of programs (IOBIT, etc.)

  Because the computer was restored, began upgrading computer from Windows Update Update Manager

  then installed the Norton 360, 30 trial days

  analyses complete completed camps, who has not identified problems

  Disk Cleanup

  Registry cleaning

  Googled the dll and nothing at all is listed

  What is this error message?

  How can I get rid of this error message?

  I have several computers and my cell phones set up shared radio router, do I need to worry about cross-contamination?

  Thanks in advance for your time and your consideration.

  Additional thoughts:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you actually solve the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update, and make at least an analysis full (not at the same time) with these free malware detection programs:
  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there is more to 1, 122, 311 and the new threats are detected every day.  Always update your virus definitions before running a scan.

  Restart your computer and solve the outstanding issues.

• blue screen every startup: error (0xc0000005, 0xF7c2815E, 0xf7C66864, 0xF7C66560) kdcom.dll - address F7C2815E base at F7c27000 Datestamp 4ed8a0bd

  ORIGINAL TITLE: help... Blue error screen?

  Help I get this blue screen error whenever I start up my dell computer... A problem has been detected and windows has shut down to prevent damage to your computer.  If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: make sure that you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try which video cards.  Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.  Technical information: (0xc0000005, 0xF7c2815E, 0xf7C66864, 0xF7C66560 kdcom.dll - address F7C2815E base at F7c27000 Datestamp 4ed8a0bd

  Thank you, I actually set myself a few hours after the announcement by starting in safe mode and scan with norton :) But thank you very much for the reply!

• Startup error: C:\Windows\system32\imagxra.dll is not valid

  Original title: C:\Windows\system32\imagxra.dll is not valid

  It appears when I click on anything and while the pc is CONSTANTLY boot on & it will be visible!
  WHAT CAN I DO?

  Hi LumierRodriguez,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• @ Startup error: < root Windows > \system32\hal.dll.

  A "highly recommended" malware free program apparently deleted a file system.

  After the reboot, I received this message at startup:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll.
  Please reinstall a copy of the above file
  So the question is... How do I re - install the hal.dll file when I can't start the computer... Download USB?
  Hi thomasm.
   
  Follow the steps listed in this article to resolve the problem:
  Error message: Windows has not start because the following file is missing or damaged

• startup error: unable to find: gmsapns.dll c:\windows\

  Original title: start-up to receive a message that windows can not find: gmsapns.dll c:\windows\

  Need to recover these files

  You might think differently after reading this:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

  A Google search generates no good reputation hits making the file name even more suspicious.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
  .  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error at startup: error loading c: | windows | izameweb.dll the specified module could not be found

  RUNDLL error

  The following message started appearing when starting my pc, please can help you, I tried the fix of this site without success.

  Error loading c: | windows | izameweb.dll the specified module could not be found

  Kind regards

  Anne-Marie

  Its probably part of some malicious software. Download ccleaner, run it and then go to tools / startup. Remove the entry. Then scan your system with a virus scanner

• Startup error: RUNDLL error loading C:WINDOWS\melpre.dll AND Windows Explorer error - must close

  RUNDLL says "the specified module could not be found.  This error occurs only on the most operational of our user accounts (we have 4)

  Windows Explorer needs to close happens on each user:

  AppName: explorer.exe AppVer: 6.0.2900.5512 ModName: akagocelozu.dll ModVer: 1.4.0.0 Offset: 00002903

  I am running XP SP3 and I'm trying to recover from multiple virus & malware removed by AVG Free, MBAM, SAS & Spybot. I also used Advanced System Care and AVG PC TuneUp and both of them seem to help.

  I have read other discussions here and tried to run the System File Checker - all that happens is a black window opens for a millisecond and closed.

  I have a lot of questions, but these are my point I suppose to jump.  Thanks in advance :)

  
  

  Your system is currently or has been infected by malware.

  I suggest read you this procedure and do the 2 scans of malware down first, then start at the beginning.

  I read you already ran MBAM and SAS, but make sure that you have run the MBAM and SAS with updated definitions.

  The System File Checker will not help you.  If you want the run later for smile and a good feeling, we can work on that later.

  It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
  I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
  !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
  .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• My PC startup error message: c:\Users\Administrator\AppDate\Local\TBHostSupport\TBHostsupport_0.dll

  How can I fix the error message I get when I start my PC

  'error loading '.

  c:\Users\Administrator\AppDate\Local\TBHostSupport\TBHostsupport_0.dll

  The specific module could not be found.

  We should perhaps consider the possibility of Malware, see:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/error-message-after-startup/98b75892-96ab-4DC4-8920-79c328fd615a