Run the project to the power vi upward

Similar Questions

• Satellite M35-S456: no right to run the Power Saver & FN keys does not work

  Hello

  I've had this laptop for a few years now, and just recently the comp crashed and required a complete reformat. I lost my recovery CD (let a friend borrow it and he got lost somewhere) and had to use just reformat using my Windows XP pro CD

  After that, I went to the toshibas website and downloaded many utilities that came with my laptop originally, but I'm having a few problems of.

  1. I can't use Power Saver. Whenever I try to open it, it says: "Cannot open because you don't have access rights to open"toshiba Power Saver""
  2 - function keys do not work. The light comes on, but nothing happens when I press a button

  And without people, I cannot adjust the brightness (among others) and we tried everything that I can find

  Someone has ideas how solve these two problems, or know where I can get a copy of the recovery CD

  Thank you

  Hello

  Form where you download the Toshiba tools and utilities?
  It seems that your laptop has been delivered only to the United States and you must use the tools and the American pilots.

  You know the page?

  Visit this link:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  I think you used the wrong drivers and tools or if you have not installed the applications in the right order.

  PS; Remember that you are logged on as administrator or if you have an administrator rights before you try to run the installation

• is it safe to run my compaq presario cq62 without the battery and the power cord attached?

  My laptop told me that my battery should replace... I have to keep my power cord in now all the time coz my battery poer only changed as 5 minutes... is it safe out of my battery and run the laptop the power cord?

  Hello:

  Yes, you can do it.

  Is it a matter of having a lighter weight?

  You can also run the power cord with the battery installed.

  Sometimes the battery is so bad that you have to remove and the laptop will not work with the battery removed and plugged power cord.

• There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  Hi, I m a bit new in LabVIEW and I'd like to ask a few questions...

  -There is a possibility to run Labview projects or to set them off from a batch file or if the exist and the ability to control labview or run it from an external application?

  -One API PI or raspberry beaglebone exists for LabVIEW?

  -Power supply Wich can recommend you control with LabVIEW? (some chip solution witn 0 - 30v / 0 - 3A DC)

  Thank you very much for your advice!

  Best regards

  Elena

  Elena,

  I know raspberry, so no comment on that.

  For the rest:

  -Do you want to create tools for developers? If so, we must look in the API of project VI and VI server. If this isn't the case, please compile your application LV as executable and call this one using a batch file.

  -LV prefer specific supplies. LV is a programming language. There are several power supply providers (including OR) which provide directly the LV API for their power supplies. So, essentially, the approach is:

  1. choose food that serves your needs.

  2. check if the power supply has a standard interface for programming (such as Ethernet, GPIB, or if the power supply is PXI, is already providing a programming interface!)

  3. check if the LV API (so-called "instrument driver") is available for the device. In the case of a PXI system, get you a device driver (for example NI DCPower).

  4. check if the LV samples are available (for example in the Finder for example LV once you have installed the driver).

  Norbert

• My ipod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my ipod. Help, please!

  My iPod 5th generation is stuck by resetting the settings and I tried holding the power and the "home" button but has just the same. Also, I tried to sync it upward, so I tunes but it has not been recognized and I can't answer on my iPod. Help, please!

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• Deploy and run the part of the project in real time RT

  I am developing a project, LabVIEW-RT, with a User Interface on the PC and evanescent code that runs on a PXI system.  I read a few posts discussing the possibility (or lack thereof) to start the RT of the project by program part.  Here's what I mean: my project has a first level VI on the host PC, call 'Host UI.vi', and a first level VI on the RT target, call it "target RT.vi".  There is the usual assortment of other features of the RT, such as flow, LAN and network Variables shared, etc.

  During development, I open the project, find the code RT target, select the target RT.vi and click Run.  I can do the same with the host UI.vi.  My code works (or not, depending on whether I have introduced new bugs).

  What I would like do is to run the host user interface and run the code to mimic an RT target selection in my project and perform a right-click.  I partly managed, but a small step escapes me.

  Can I programmatically deploy my RT code and make it pop a window front so I can click on the Start button.  I even managed to start running programmatically using VI server.  However, when I start it programmatically (rather than clicking Run), my shared network Variables are not available.

  I studied it a bit by using Distributed System Manager.  With her, I can 'see' my shared Variables of network on the target of the RT, but its status is offline.  I put online by clicking on the button 'Start process' in DSM, however, when I then try programmatically start my vi target RT using VI Server, Shared Ntwork variables goes Offline (accordint DSM).

  Question - is there a way to do a program equivalent to locate my network shared Variable in DSM and clicking on start processes?

  [I had a great idea while writing this post.]  I have noticed that if I deployed my VI and also expanded my network shared Variable, DSM has shown to be online, but the target RT start VI VI Server, the NSV went offline.  What happens if I have deployed it after from the remote?  Good idea, too bad that it didn't work...].

  All the best ideas?

  BS

  Well, I just did!  I wrote a demo project RT with the following characteristics: RT side consists of a single VI that affect False in a Boolean Variable (NSV) shared network, goes in a while loop until there is true, goes into an another wait loop to make it False, then ends.  The NSV is hosted in a library on the remote target.

  The host does the following:

  1. Determine the IP address of the target of the project.
  2. The first name of the VI RT to run, to return a reference to it.
  3. Use the reference to deploy the RT VI on the remote target.
  4. Use the IP address and the name of the RT VI for a VI Server reference.
  5. Use the reference to start the code that runs on the target of RT.
  6. Go in a loop looking at the NSV and wait for the status of the error not be 8BBB0006 (uninitialized NSV).
  7. With the value returned by the NSV (must be set to False, defined by the code of RT), deny it, set it and wait that it will change.
  8. Do this one more time to return the NSV to its original value (as defined by the code of RT).

  Before running the code, right-click on the target of RT in the project and turn on "disable AutoDeploy Variables.  J of Zach, an Applications Engineer of NOR, suggested that this step, which can be the key step in the resolution of this dilemma.

  To test this, I restarted my PC and the aim of RT.  Once both had restarted, I opened the project on the PC, and without interaction with the section the project somehow RT (including not not clicking 'Connect'), I ran the host code.  He started the remote code and was told that the round trip time for set and reset my NSV was about 29 msec.

  I intend to make a full text of this and submit the entire project, with documentation and all the screws under utility, I used, to community page OR.  I'll try to get this done this weekend...

  Bob Schor

• Running Windows XP - SP3. Power light flashes and the fan motor is running but no video to monitor input

  Original title: MY PC has CRASHED or?  Windows XP - SP3

  Running Windows XP - SP3.  Power light is flashing and the fan motor is running but no video input for monitor and no power to the keyboard.  I tried another monitor, but still no video input.  I wonder if the motherboard went wrong or what happened.  Thanks for any help.  Pat J

  Hello

  Since there is no power for the keyboard and monitor, the issue seems to be with the material. I suggest that get you in touch with the hardware manufacturer for further assistance on the issue.

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• Run the same synchronization project at a stage of DPRProjection using different workflows

  Hi all

  In the synchronization Editor, I have a project with 2 workflow.

  I run the synchronization in a stage of the process, and then I change with a step of sql query the workflow attached to it to run the synchronization even with a different workflow.

  request to change the workflow:

  Value = "update DPRProjectionStartInfo set UID_DPRProjectionConfig = (select UID_DPRProjectionConfig from the DPRProjectionConfig where DisplayName = 'Workflow 2') where DisplayName ="SynchProject"

  but when I run the second sync I get this error:

  Error messages [2134003] = error executing a screening complete!
  [1777018] error running workflow (ITS Application Portfolio import) of the project of synchronization (synchronization Costa).
  Invalid revision store [1777263]. The store belongs to a different configuration of the synchronization and can not be used!

  I missed something. Should I update another table with the workflow to use?

  Is not possible to programmatically determine what workflow performed in a stage of the process?

  Forget the attempt to update the startup configuration when you deal with enforcement.

  Create a second configuration of starting with your second workflow instead which is not an affected grid.

  In your process chain, have two step run the FullProjection. One runs the startup configuration 1, the other a startup configuration 2.

• warning when you run the wizard generated project stunts on camera

  bbndk 10.

  (1) new-> project-> project Tabbed Pane BlackBerry-> Cascases

  (2) build and run the application on the device

  (3) some warnings in console printe

  MsgNak received - reference
  Remote server is little endian

  WARNING: .dynamic section "/ home/robin/bbndk/target_10_0_9_1673/qnx6/armle-v7/usr/lib/libcertmgr_client.so.1" is not to address expected (evil of library or version incompatibility?)

  WARNING: don't load shared library for the libusc.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the libsrv_um.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the libpvr2d.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the libIMGegl.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: do not load symbols of shared library for wsegl - screen.so.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the libImgGLESv2.so symbol.
  You need 'set solib-search-path' or 'set sysroot?

  WARNING: don't load shared library for the img_codec_png.so symbol.
  You need 'set solib-search-path' or 'set sysroot?
  WARNING: don't load shared library for the libglslcompiler.so symbol.
  You need 'set solib-search-path' or 'set sysroot?

  How to fix the warnings?

  Device offers to install a driver when it is plugged? Could also contribute to install Blackberry Desktop Software.

• Tried to build and run the "QXmlStreamReader" project, but the display of the device debugging errors] error 2, no rule to make target "main.cpp", need to "debug/main.o.

  I have tried to build and run the project "QXmlStreamReader" with momentics

  but display as errors

  The path location type Resource Description
  make: * [Device-Debug] problem error 2 QXSRExample C/C++
  make [2]: * no rule to make target "main.cpp", need to "debug/main.o.  Stop.    QXSRExample C/C++ problem
  make [1]: * [debug] problem error 2 QXSRExample C/C++

  My project is to

  CBC

  main.cpp

  qxsrexample.cpp

  Inc.

  qxsrexample.h

  assets

  hand. QML etc.

  Reference: http://qt-project.org/doc/qt-4.8/qxmlstreamreader.html

  And

  http://developer.Nokia.com/community/wiki/QXmlStreamReader_to_parse_XML_in_Qt

  I posted a few snippets on the forum some time ago, maybe they are useful:

  https://supportforums.BlackBerry.com/T5/native-development/how-to-parse-XML-data-coming-from-server-...

• can a pavilion dv7 run on just the power plug

  Cannot run my Pavilion dv7 3173 it without the battery even if the power supply cable light is on. The system starts in about a second, then turns off. My battery needs to be replaced, but FDI like to run the laptop without it.

  Hello:

  The battery is sometimes so dead that the only way to run Notepad is to remove the battery and run from the power of a/c only.

  So, if your question relates to "Is it possible to do", then the answer is Yes.

• The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed.

  Hello world

  The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed"?

  OR

  Is there a way to convert my panels that works perfectly in CC2015 up to the CC2015.5version?

  I hope someone can give a solution, because everything that I could find were unanswered questions.

  Thank you all for your generous contribution

  Stone

  You have set the indicator of debugging for 2015.5 CC: HTML Panel advice #21: Photoshop CC 2015.5 survival guide | Photoshop, etc ?

• Cannot run the application module in a project of (Model) generic in BPM application

  I use jDeveloper 11.1.1.6 and I want to add a generic or a model for a BPM application project, in order to develop the custom user interface.
  but when I created an application module with associated and then java class do a right click on it to run, I saw the following error message:
  
  (oracle.jbo.ConfigException) Houston-33001: tester.xcfg Configuration file is not found in the classpath.
  
  more when I use a merger Web application instead of BPM application, with the projects of model and view controller, there is no problem and I am able to run the module of the application.
  
  Thank you very much for your contribution.

  Comment the mds-config section in your adf - config.xml temporarily and try. It will work

• When you run the script via VMware tools when power changed, some commands in script (as a copy) has failed.

  I came across a very strange question. I tried to create some custom vmware scripting tools, such as a new .bat file. This file contains a large number of orders, mostly as copy command "copy file://\\192.168.172.5\abc.exe c:\. ». I set this file as a custom script for Script event - power on guest operating system. Everything goes well with the bat file when I tested it. But after that I changed the State of power to power on, all other commands work fine except the copy commands in the bat file. Why? How can I make it work? Of course the problem of network. And that makes me very confused.

  Hello

  First copy the files on local disk was OK.

  If this works for local disk, but not to a network drive, then hit you indeed a permissions issue any.

  But if I run the script with tools VMware service script, the commands of copy (of the remote shared folder) failed while other controls worked well. I'm quite confused.

  In fact, it is easily explained. The VMware tools service (Yes, it's a service) runs under the account Local system and by default, the local system account has no access to the network for security reasons. You can change the user of the service runs under and see if that solves your problem (very likely)

  To do this, go to computer management (right-click icon desktop, select 'Manage') and open Services and Applications, service page, locate the VMware Tools service in the list. Select properties, log on to the page tabs and change account at your own Local System account. Restart the service and it should work.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki