Running the Remote OS command

Similar Questions

• I'm trying to run the sfc/scannow command. but the computer won't let me

  How to make a console session
  I'm trying to run the sfc/scannow command. but the computer won't let me. He tells me that I need to be an administrator (which I am) and I have to run a session of consul?

  Go to start | Programs | Accessories and right click on the command prompt, and then select run as administrator.  It's a console session.

  Steve

• How can I run the remote registry service in Windows Server 2003?

  original title: How do I run the remotley remote registry service? I'm unable to open a session

  I'm on windows 2003 R2 server, when I connect automatically to this topic still disconnects once, I'm remotley to change the registry, but the remote registry service does not work, how to run from a computer on the network, because I can not connect?

  Why you ask a question of Server Windows in a Windows XP forum?

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Allow non-root Admin user run the vim - cmd commands

  Hi all

  I created a new user who belongs to the root group and appears in the roles of Admin when I run vim - cmd vimsvc/auth/role_permissions admin.

  However when I ssh to the server as the new user and trying to run vim - cmd, the following error is generated:

  The version check error: could not get the version vmkernel: operation not permitted (running as non-root?)
  

  Anyone knows how I can allow a user nonroot administrator run the commands in vim - cmd via ssh?

  TIA,

  
  Kind regards

  Vlad

  It is the nature of ESXi - kb.vmware.com/kb/2005299.  You can use managed to move to the root connection. 

  You can configure it with ESX sudo, but is not available with ESXi (at least not yet - http://communities.vmware.com/thread/344466).

• You run the remote Manager

  Friends,
  as I prove the Manager remotely to run successfully.
  I followed the installation documentation and start the remote remotemanager.bat Manager, then when I can prove that it is running, it loads a console and designer
  
  Thank you.

  Remote Manager allows you to run code on a remote box. You can create a jar file that performs a task. Copy it to the JavaTasks folder on the server of the IOM and the Manager remote server. When you perform your connection by using a resource, you select a remote control for the type of task, then it shall provide the values of Manager remotely as well as the resource.

  An example of what it does: Let's say a 3rd party host your servers, but they can not just open all the ports you need. Instead, you install remote manager and then they have to open 2 ports Manager remotely (if you are using SSL) and all information will be sent through this port.

  You can test that it is running by accessing the console design and open distance element manager to make sure it contains running.

  -Kevin
  Give points where points are earned

• How the REMOTE HTBasic command?

  I'm trying to understand what actually do exactly orders remotely and CLEAR in HTBasic GPIB communication.

  I think remote sets the REN line and CLEAR running a selected device clear (SDC).

  Does anyone know if this is correct or if these functions also include other actions such as the IFC etc. ?

  Any help much appreciated.

  I don't think realize you that National Instruments is not the seller of HT Basic. A company called TransEra is. I guess that the similarity between the two names is confusing.

• Cannot run the remote procedure

  Hello
  
  I have a procedure in the schema on the database A system.
  I am trying to run this database stopred B procedure.
  I have DBLINK from B to A.
  
  I get the following error:

  SYS> begin
    2    system.get_ehcc_cr(2)@a;
    3  end;
    4  /
    system.get_ehcc_cr(2)@a;
                         *
  ERROR at line 2:
  ORA-06550: line 2, column 24:
  PLS-00103: Encountered the symbol "@" when expecting one of the following:
  := . ( % ;

  Please advice.
  Thank you

  and once you follow the suggestion of Hoek, try this...

  begin
    some_other_user_schema.get_ehcc_cr@a_your_remote_database_sid(2);
  end;
  /
  

• How to run the command sfc runs on Vista

  My dept here reimagee IT my computer today and I'm unable to access my WD external drive. WD has suggested to get help with the sfc command before possibly spoil my data. Anyone have any ideas?

  Thank you

  Hello

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  you have a newly imaged drive today while there should be no problem with the operating system

  SFC is only to solve minor problems

  for the major problems you will need to do a repair installation

  but this does not apply to you in your case that your IT Dept use not reimage repair

  I suggest that you go and talk to your IT Department

  ask them about the last vista hardware drivers for your hardware of computers

  and your IT Department is responsible for your safe running of computers

• Upgrade Horizon 1.5 - where to run the command of?

  May be a stupid question but I was reading in the 1.5 upgrade guide and it says the following:

  Procedure

  1. go to the command line to start the upgrade.

  2. run the updatemgr.hzn command.

  Update/usr/local/horizon/lib/menu/updatemgr. HZN

  Where is this supposed to be run from? A particular virtual machine?

  The Configurator WILL.

• had a problem with the remote office, locking of the time-out and the remote host

  I have two computers that both are connected to the network of my company.  Both computers have Windows XP Professional Version 2002 Service Pack 2 installed.  Both computers were set up for remote desktop connection.

  Computer A is a desktop unit and computer B is a portable device.

  Computer A, I can run the remote desktop to computer B without any problem.

  When I run the desktop remotely from computer B to computer A:
  -I see the typical login screen
  -After I typed the user name and password, and then after about 30 seconds, I got the message delay: "the remote connection has expired.  Please connect to the remote computer again. »
  -at this point, the computer A's lock-up, does not have a mouse or a keyboard. the only way out is turning the device off.

  I spent hours on the website of microsoft looking for possible solutions, but can't find.

  According to some suggestions, I have disabled "Symantec Endpoint protection" and "Microsoft Office Communicator", but it did not help.

  Any help is appreciated.

  Check out this thread

  http://en.community.Dell.com/forums/t/19271963.aspx

• Run Microsoft remote applications (RemoteApp service) through WebVPN

  Hello

  Having been troubled by the following thing:

  I've got Cisco ASA 8.2 configured to use WebVPN. And it seems that everything is working properly.

  But, when I try to run the remote application via Microsoft TS (RemoteApp service web pages), it returns me error: host is unreachable.

  The application correct running inside the local network and the run profile includes the IP address of the host. The application installed on the same host running the service Microsoft RemoteApp. So, if I can not access the server, I should have access to the application as well...

  So, did anyone knows where the hook?

  ! ACL

  access-list acl_vpn_clients note * VPN access for clients to resources *.
  access extensive list ip 172.16.13.0 acl_vpn_clients allow 255.255.255.0 host 172.16.3.101

  ! Web - acl

  access-list acl_web_clients webtype allow url http://172.16.3.101/ * default journal

  access-list acl_web_clients webtype allow url rdp://172.16.3.101/ * default journal

  ! default policy

  dynamic-access-policy-registration ClientsAccessPolicy

  Description "Access policy by default for users of WebVPN/Anyconnect customers"

  network-acl acl_vpn_clients

  WebVPN

  Appl-acl acl_web_clients

  value of the Corporative URL-list

  ...

  ...

  WBR,

  SERG

  SERG,

  can you say try adding:

  Iexplore.exe

  mstsc.exe

  TSWbPrxy.exe
  
  This is the process involved as far as I understand which app you're using.
  The processes were "reverse engineered" by looking at process monitor duing execution ;-)
  Marcin

• CFEXECUTE to run the process of C:D - running get permissions error in C:D possible side

  I'm running a statement of CFEXECUTE in CFScheduler work that is supposed to C:D a file from one Windows Server to another Windows Server.

  I have successfully built the C:D batch processing and can run it successfully from the CMD prompt (by double clicking on the name of .bat file).

  Here's my response:

  "< name="C:\Windows\system32\cmd.exe cfexecute "arguments =" / E:\inetpub\WWWROOT\Tips\ScheduledJobs\tips_to_tws.bat "c

  The job completes without error, but I get an error C:D - LAPP010I - submit a file open failure. CCODE = 8 INSTANCES = 0

  So my thought process is the following: when I go and run the command C:D by double clicking on it alone - it takes my id/password as the presenter.  This is evident by looking at the logs C:D.

  And when I run the CFScheduler work, executed the command CFEXECUTE, he uses the XXXXXX id to run the C:D command.  So my question is what is the XXXXXX id?  I don't have a ColdCusion running on a special service account, so I'm not familiar with what id he would be associated.  So, any help would be appreicated.

  Here is a description of the problem, as well as of a workaround.

• Run the bat with cfexecute

  Hello
  This is a newbie question, but I'm stuck. I have a .bat that works very well through the command prompt, but doesn't work with < cfexecute >, it seems simply to read the .bat but not run. The .bat reads as follows:
  
  Java - classpath ".;" C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar' AnnieAPI
  
  "When I run < cfexecute name="C:\CFusionMX7\wwwroot\i-recall\javaClasses\GateClasspathRun.bat ' variable = "myVar" timeout = "100" >
  < / cfexecute >
  
  The output looks like this:
  C:\CFusionMX7\runtime\bin > java - classpath "C:\CFusionMX7\wwwroot\i-recall\javaClasses\GATE-3.1\bin\gate.jar" AnnieAPI
  
  Simply, he reads and does not run the AnnieAPI java command. I didn't write so maybe I need to add something to run this .bat file. Any help is appreciated.
  
  Kalen - G

  I thought about it. Even if the bat file and the java class are in the same folder, I did specify the location by adding the following lines at the beginning of the .bat file:

  EDI
  CD cfusionmx7/wwwroot/i-reminder/javaClasses

  Now it works perfectly. Thanks for all the help, I appreciate it.
  -Kalen

• Running the command in the remote nodes scandisks

  Version of grid infrastructure: 11.2.0.4

  Platform: Oracle Linux 6.4

  We have a cluster of CARS in production at 3 knots. We have created a group RAC 3 - node test for cloning for purposes

  We are the automation level of SAN cloning of production test.  After that the guys from Hitachi, take a snapshot of diskgroup production LUNS they present LUNS to the RAC cluster test. When testing the cluster, please proceed as follows to make cloning

  Step 1. In node 1, run

  /etc/init.d/oracleasm scandisks

  Step 2. In Node2 run

  /etc/init.d/oracleasm scandisks

  Step 3. In Node3, run

  /etc/init.d/oracleasm scandisks

  Step 4.

  srvctl start diskgroup g < Name_DG > - n Node1

  srvctl start diskgroup g < Name_DG > - n Node2

  srvctl start diskgroup g < Name_DG > - n Node3

  Step 5. Finally, start the beginning of the database the database test by using clustering

  srvctl start database-d MANHPRD

  Since a shell script, I would like to run the above1step,2 and 3 of Node1 in sequential order as shown above. How can I do this? I'm not worried about step 4 and 5, as it can be run from all nodes.

  Page Hello,

  Why not use ssh? very simple

  node 1:

  SSH root@node2 /etc/init.d/oracleasm scandisks

  take note of the guy! Comment

  edited: take a look at Tobi & #39; s Oracle DBA & amp; Blog of UNIX: Cloning ASM Diskgroup to create the database Clone

• "Messenger Service, or the Net send command not working only not on the service remote computerhe.

  Messenger Service, or the Net send command not working only not on the remote computer, despite the messenger service is started "it works only if I restart the service.
  operating system is windows xp
  service pack 3

  Hi Charbel,

  Have you done a recent software or hardware changes to the system?

  This problem occurs because the Messenger service is disabled. The Messenger service must run on the destination computer to activate the NET SEND command.

  Because the service is already started, and you must restart the service, you can try to stop the service, change the startup type to automatic and start the service. Check if it helps.

  Please refer to the article to define the service as automatic:

  Programs or services that use the alerts service or the Messenger service do not work as expected after you install Windows XP Service Pack 2

  For more information, see the article:

  The NET SEND command may not work correctly on a computer that is running Windows XP Service Pack 2

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.