Running Win7, McAfee firewall from Verizon, impossible to print on HP 8610. Will print if the firewall disabled

Similar Questions

• If my iphone 6 door - from verizon to sprint, can use a sprint sim card in the same phone or only verizon?

  I have an iphone 6 that the carrier was verizon, I took out the sim card and it says no carrier, insert the sim card. So I wondering if I switched carriers, could I just put this carrier sim card in my phone or I would need a new phone?

  Compatible with Verizon LTE phones are unlocked GSM. If you have a SIM card from another carrier, you can use it only in the Verizon phone.

• When l try to print a PDF from adobe a message says its impossible to print, because the pages have not been selected. the pages are selected, but still does not print.

  l ran a diagnostic diagnosis and the printer works fine, did a test print, no problem.

  l am trying to print a PDF from adobe and it don't print, said did not select pages to print. l selected pages and still nothing.

  Hi Mary,

  Thanks for posting your query in Microsoft Community.

  I understand from the information you have provided to us, you are facing problems when printing PDF documents. I will certainly help you in this matter.

  1. What is the operating system installed on your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  Resolve PDF printing problems. Acrobat, Reader

  http://helpx.Adobe.com/Acrobat/KB/troubleshoot-PDF-printing-Acrobat-Reader.html

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• downloading video from my nikon coolpix camera, windows media player will not play the video why?

  Downloads of video but when I try to play windows media player flashes a message saying that he met with a problem and wont play video. If I try to record video on Windows live movie maker it used and it tells me error 0 x 80004005. What I am doing wrong?

  Because its a codec? Try the K-Lite codec package.

  See you soon,.
  Jerry

• Impossible to print on the printer hp deskjet 3420 for windows 7 driver

  I have an HP deskjet 3420 printer I am trying to set up as a local printer to my PC. HP site doesn't have any driver for this printer and says to use deskjet 3600. When I look at my available printer drivers I can't find a 3600 printer driver. Also, went into windows update as the support instructions say and update could not find a driver. Tried to download a driver windows 7 for a deskjet 3600 and it say instructions to use windows update, which had not worked for me. I tried several other print drivers and have no luck with one of those I chose. any help appreciated

  thought about it not need to go far thanks

• McAfee Firewall will stay not on; Cannot turn on the firewall of Windows 7; Computer keeps restarting; and I can't access a file because my computer says I don't have permission

  I use McAfee Firewall as my firewall.  Now when I try to turn it on, it continues for less than a second, then turns off.  Firewall Windows also not be.

  My computer rebooting in itself guard so I can't complete a virus scan.  In one place, he suggested I have try in Safe Mode, but it didn't work (and he told me that it did not work because I couldn't connect to the internet).  I tried "Safe Mode with networking" and he would not even let me scan.

  Another thing, the last time that I tried to scan it got stuck on "Internet C:\Windows\SysWOW64A\config\systemprofile\AppData\Local\Microsoft\Windows\Temporary / / Desktop.ini.  This makes me think that this could be the problem, so I tried to get him to put the file in "VirusTotal.  I was able to get to him before that I got the idea to put it in "VirusTotal" but now it won't let me and he says:

  "You don't have currently not allowed to access this folder."

  "Click Conitnue to have permanent access to this folder."

  When I try to click on "Continue", it only ever through.

  I tried to change the 'Owner' under 'Security' tab but it still doesn't work, so I can't check to see if the file is a virus.

  Should I try to download a new antivirus program to scan my computer?

  Sorry if this is in the wrong category.  I have so many problems, it is not easy to categorize.

  Uninstalling McAfee completely.

  Do not use any product that claims to make your computer run better.  Almost all of them are either false, themselves, an infection, or put your computer at risk. Delete everything that claims to be there to prevent the infections or pretends to make your computer work better, except for the singular than an antivirus product.

  It is a controversial topic, but your choice of AV software may be something you want to take a 2nd look.  I suggest you visit this website to get an idea of what AV software made the best work, depending on what type of user you are: http://www.av-comparatives.org/ is a non-profit that has been around for a long time and I hope that their results.

  When you interpret these results, remember the difference between a product that detects 95% and the other 99% of infections, it is actually 5 times more likely to allow an infection.

  I pick up after about 150 Windows PCs and I have more than 13 years.  Until last September, the only AV software that I would allow my clients to use was Norton Antivirus.  Note that this is not the same as any other product, Norton 360 or Internet Security.  My clients rarely know infections.

  Last September, Symantec (Norton owner) decided to no longer sell such a product.  After much research, I decided on Bitdefender Antivirus 2015 +.  I installed it on most of these PCs to date and has never been a problem, and it has been on a course of about 11 months now...  It is a better product than Norton.  It is also cheap. One of the things I love the most about it, is the silence and discretion.  Especially if silenced you its function "portfolio".

  My customers know that if they install any product of 'Internet Security', I won't work on their computers until it is deleted.  Very well, I learned the hard way that other components of these products (other than the AV itself) IS causing more problems than any profit that they bring and work mainly by stopping the Windows component that does a very good job of this particular task still.  The problem is that when I started to work on a computer with an IS on it, I could spend hours trying to diagnose the problem, only to find out that by taking the product of the IS, the problems have become much clearer and easier to solve.  I think that the product of the IS actually hides the problem.

  As I said, this is a controversial topic and you will find many different very strong opinions.  I know that mine is based on a fairly large sample over a long period, and are consumers of consumer type Windows.

  Please note.  You should never have more than one protection software installed.  Always make sure that you completely remove the firmware all protection before installing a new one.  That contains software that may have come preinstalled on your computer when it's new

  Totally impossible to delete most of all AV software simply by using the standard uninstallation tool Windows 7.  Most of the majors also publishes a "removal tool" that gets the rest.  If you do not completely remove it, it will cause very hard to understand and diagnose problems.

• Problems of DirectX running Win7 via Bootcamp on Macbook Pro

  Hello world.

  So I installed Win7 64-bit on my Macbook Pro (Intel Dup 2.66 GHz, 4 GB DDR3, NVidia GT 9400 M) using bootcamp eager to play games. I kind of want to go pick up Starcraft 2, but I don't want to buy a mac version of a game as much as I could get a PC of office within the next year some time.

  Anyway, so when I run the games, usually they are simply launching without saying anything or it will give me some message about Direct3D. Then, when I go in the DirectX diagnostic tool, it lists acceleration DirectDraw, Direct3D and TGP of texture as 'not available '. I checked and made sure the hardware acceleration has been at the highest level, who he was.

  Then, I went online to see what others were doing, and I found in a few places where people were installing DirectX 9.0 with DirectX 11 coming with Win7. I tried to install it and I get the following error message:

  "Internal error System. Please refer to DXerror.log and DirectX.log in your Windows folder. »

  From there I wanted to just post a few places and see if someone else has fallen on these issues running Win7 on a mac, or something like that. I know that these laptops are supposed to run games on bootcamp pretty well, but I can't seem to overcome this problem. Looking for a next step.

  Thanks for reading.

  I would check to make sure you have your video drivers properly installed also.

  On the note of StarCraft 2, there is no separate versions.  As more cross-platform games nowadays they are delivered with the binary Windows and Macintosh on the same disk.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net anddasmirnov.net. Please post back to let us know what works and what does not. :) And if a response is useful mark it as such. :)

• McAfee Firewall and anti-virus

  I am currently using Comodo Firewall and Shield Deluxe 2009 anti-virus on Windows XP Home Edition software.  My information SIW and Belarc system) tells me that I do work with McAfee Firewall and antivirus as well.  I have not used McAfee for 4 or 5 years and used the removal of McAfee at the time tool.  I did C drive and registry research and came up with nothing.  Disabling the firewall in the Security Center windows, gives a message that McAfee it does not and I'm not protected.  Where McAfee?

  Refresh Security Center information:

  Start > run > cmd [Enter]
  net stop winmgmt [Enter]
  CD /d %windir%\system32\wbem [Enter]
  repository.old repository ren [Enter]
  net start winmgmt [Enter]

  It may take a minute or two to complete while WMI rebuilt the database or restart the computer.

  MS - MVP - Elephant Boy computers - don't panic!

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.

• Can I run win7 on a compac presario re468aa

  Can I run win7 on a compac presario re468aa computer

  According to the following specifications:

  COMPAQ Presario SR2013WM (RE468AS) Desktop PC Athlon 3800 + 512 MB DDR2 160 GB HDD capacity NVIDIA GeForce 6150 LE Windows XP

  You need to update to a minimum 2 GB RAM to comfortably run Windows 7.

  System requirements:

  * 1 gigahertz (GHz) or faster 32-bit (x 86) or 64-bit (x 64) processor

  * 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  * 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  * Peripheral figure DirectX 9 with WDDM 1.0 or higher driver

  ---------------------

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Running Win7/64, WinXP Pro/32 and Ubuntu 9/64 in VMWare

  I have a scanner Canon Canoscan 3200f requiring drivers for it to run. Win7/64 will not work with 32-bit drivers and when I tried to use the Microsoft Virtual PC and XP mode, it still leaves not the drivers install. What I've read, Canon, Epson and HP not fix ALL the 32-bit drivers on 64-bit (and how long it has been since XP Pro/64 came out?).

  My PC is based on a mobo Gigabyte running an AMD Athlon 64 X 2 5400 + Black Edition CPU and 4 GB of RAM.

  VMWare will allow material that requires and has only 32-bit drivers to install and operate? I want to run Win7 Pro, XP Pro and Ubuntu 9, the last so I can try to support my daughter recently built PC Ubuntu. Right now I'm trying to decide between VMWare Server, Virtual Box and 3 partitions on a 500 GB SATA drive.

  Thank you.

  Since the host operating system that is running Server 2.x has no need for drivers, you should be able to have a 64-bit OS host (note that no office of operating systems are officially supported as guest operating systems and he attended problems reported with guests from Vista x 64 stuck at 95% at the start and it was not a version 2.x Server since Win7 is around) and then a 32 bits comments which, as long as it has a USB inside virtual adapter, should access the device to USB host ok. I use the word "should", because not all USB devices work - those who fail are usually those whose data rates are too fast for VMware to manage. Worth a search around to see if there are any reports of good or bad for specific devices.

  Good luck!

  Guy Leech

  VMware vExpert 2009

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• FRM-40208: train running in query mode only. Impossible to edit database fields.

  HelloW everyone
  
  I get the following error
  FRM-40208: train running in query mode only. Impossible to edit database fields.
  I have not any trigger on this form.
  Database 11g Release1
  form 10 Release 2.
  How to solve the problem of abve?

  Hello

  Check the URL parameters and see if you have query_only parameter with the value 'Yes' (http://.../forms/frmservlet?...&query_only=yes). Try to run the form by deleting (or the definition of query_only = no).

  If you are running from form designer, you can just uncheck this option in Edit-> preferences-> tab Runtime.

  Arun-

• Unable to get email from Verizon using TB

  I don't know that he has made the point before...

  I am on Windows 7

  I just download Thunderbird 31.4.0. Had used Eudora, TB imported everything from there. The reason why I stopped using Eudora was I couldn't is more no mail from Verizon, and the 'aid' was not helpful.

  Now I'm on tuberculosis. I can't send to Verizon. I tried using the port 995, 990, and 465 in addition to the default for the server 110 pop.
  Nothing.

  Verizon use SSL Version 3. It is a broken Protocol which has been withdrawn from Thunderbird.

  Ask Verizon when they offer accounts with or without encryption using TLS.

• TB refuses my password - pswd is good because I can access e-mail on the web page of Yahoo from Verizon

  I use Yahoo from Verizon. Everything has worked when suddenly Thunderbird does not accept my password to give me the following error message: "sending the password failed. "Mail server incoming.yahoo.verizon.net replied: (#AUTH012) Incorrect username or password".

  However, the password is good because I can log on and get my email from the web page of Yahoo from Verizon.

  The problem is solved. Verizon-Yahoo never was informed to change the user ID in the settings of my account xxxxxx in [email protected], that is, simply add the @verizon.net to your user name on the server settings page.

• can not access my 2 phones from verizon on PC by uploading photo.

  I have a 2 year, HP pavilion slimline computer desk, model # is S5-1224. I improved our Verizon phones recently and told me that the USB cord for the charger could also enter the PC to d/l images. Cool I thought, but it does not work. I'm working my way to my list of USB, and there is a yellow warning triangle with! mark in it. When checking more, it says "device is not available, code 10." I did a google on it and found that the USB driver is likely bad. I've updated until I'm blue in the face and it still shows the driver in 2006! but the construction date is 9-2012! How this can be.

  Anyway, I went to HP and they linked to some "test site" that said, I had 16 drivers 'old or ancient' and of course wanted $29.95 to "solve" the problem. Can't believe that HP has no updated driver but outsources for money. Anyway, when I pull the usb cord, the yellow triangle disappears. I plug my phone 2 days years wifes, Panel yellow returns! Be very sick of this problem. All I want to do is d/l my pictures from my camera to my pc. Does anyone know of a difficulty which only costs $29.95? Just don't have it right now.

  Thank you.

  Mark in Phoenix

  Well, another day has come and gone and I could write for another hour, but won't. Really wish I knew I talked on the phone yesterday at HP. What I ended up doing was moving the USB cable to the BACK of my HP POS computer and guess what? Yep, the USB in my device manager warning flag came out and the LG CDMA USB Modem icon presented in the section "other devices." I finished then setting all the other stuff then got a popup from Verizon saying that LG had an update available for the phone, so I jumped on it. So even if pillar 2 USB front still does not recognize my phone, those back do. Sorry, I mean no one tech on the phone could at least tell people to give it a try when they know that no one is broken, like just about everyone out there the pinhead is perhaps.

  In any case, support of HP, nice work, trying to sell your plan of $227 'service', but rather all do you this, we have P * sing off the coast of what was a loyal user of HP. No more HP for me. Products are so-so at best, and the "customer service" lives up to its name.

  BTW, I'll add this to my Moose to Meg Whitman email I sent yesterday, and which included a copy full of my post above. I hope that you have a good day well!

  Mark in Phoenix