Runtime error 216 at startup

Similar Questions

• runtime error 216 at 004040da

  In my pc, I use a few so-called Agedres and AnaGrama programs, and still, they cause an error, the "runtime error 216 at 004040DA" and the "runtime error 216 at 004040AE. Who are these errors?

  Hello
  -Do you have the chances of software/hardware on your computer recently?
  -This work was fine before?

  Method 1:

  Step: this error code seems like there's a virus on the computer. See the article below which speaks of 216 error code.
  http://support.Microsoft.com/kb/259279

  Step b: check your computer for viruses and malicious software.
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  Method 2: how to configure Windows XP to start in a "clean boot" State
   
  http://support.Microsoft.com/kb/310353

  Note: When you are finished troubleshooting, follow these steps to configure Windows to use a Normal startup of the article mentioned above State.

  Method 3: If you are unable to run the MSS in normal mode, then you can try to start it in safe mode with network.

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  I hope this information helps!

• Fix runtime error 216 at 03E61872

  starting the computer... when I try to fix runtime error 216 at o3E61872... I select Run type regedit... Count watch Devil Administrator regedit... give me a solution to slove this

  Hello

  1. are you able to boot to the desktop?

  If Yes, then I suggest you to follow these steps and check if that helps.

  Method 1:

  This error occurs if your computer has been infected by a Trojan SubSeven virus. I'll get to make a virus on your computer check to remove the virus.

  You can also try antivirus scan online currently running on the computer:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Method 2:

  You can also try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  If not, then start the computer in safe mode and check if you can start:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  It will be useful.

• RunTime Error 216 at 00405DCA Skype version 7.18

  Hello

  After reinstall W7 pro 32-bit is the installation of Skype 7.18 seems OK, but to run the response system

  RunTime Error 216 at 00405DCA I need to help me

  Thanks in advance for help

  Regarding kinds

  Bernard

  Hi ruwim

  Thanks a lot for your answer

  Concerning

  Bernard

• Runtime Error 216 at 0040418 has

  Sometimes when I download games from a trusted site, I sometimes get the message: "Runtime Error 216 at 0040418 A" I tried to fix this by finding some good scanners that will solve the problem, but simply fail because they are not supported on Vista 64-bit systems. Is there a good way to get rid of this annoying error for my 64-bit system?

  SEGPED,
  You must check with the Publisher of the games for this view to check that they are able to be played on a 64 bit system.  Given that this only happens with games on their site, it may be something that they know and have a resolution for. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix runtime error when you open a folder in windows xp

  I HAVE WINDOWS XP AND IE 8. HAPPENS EVERY TIME I OPEN A FOLDER OR AN IE BROWSER. SOME RUNTIME ERROR CODES ARE: RUNTIME ERROR 216 AT 004AD768, RUNTIME ERROR 216 AT 004ED768, RUNTIME ERROR 216 AT 009BD768. They vary, but they are basically runtime error 216.le does not when I open a program or application, just files and IE browsers.
  PLEASE RSVP AS SOON AS POSSIBLE.

  HOW I SOLVED IT:

  I have gived upward with this problem when I found a solution.
  I uninstalled IE8, restarted the PC,
  Initially, the problem continues, but after about 5 minutes with the PC and opening folders,
  then the Runtime error 216 has DISAPPEARED forever.
  I ve due to the help of Internet Explorer 6.
  However, I Don t know if the problem would be to reinstall Internet Explorer 8.
  THAT S THE WAY I SOLVED IT THIS HORRIBLE MISTAKE!
  Repeat the 3 steps:
  (1) uninstall IE8
  Reboot 2)
  (3) use PC normally, in a 15-minute error will disappear.
  Don't forget: Error 216 doesn´t dissapers inmediatelly.

• In XP, when you try to open a file, getting error 216

  Dear Sir.

  every time I open a file, I find runtime error 216. Please help me to remove this error.
  Best regards

  http://support.Microsoft.com/kb/259279

• How to get rid of Microsoft Visual C++ Runtime error at startup. Sometimes after that I turned on the computer before you open any program.

  Once I turn on the computer and before I opened a folder/file/program.

  The box says;

  "Runtime error!"

  Program: C... »

  So I have no idea what program it is. As I know there has been no new program loaded, but it's my wifes computer, so I can't be sure.

  Hello

  Try these methods and see if it helps.

  Method 1:

  Step 1: Start in safe mode and check if you get the error.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Clean boot

  Perform a clean boot to verify if a third-party program or service is the cause of the problem.

  Refer to this article for more information:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:

  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Method 2

  I suggest that you try to run the System File Checker and see if it finds all of the corrupted system files.

  (a) click Start

  (b) type: CMD, according to the results, right-click CMD

  (c) click 'run as administrator '.

  (d) at the command prompt, type: sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows script error home at startup "microsoft JScript runtime error '.

  script: C:\users\AppData\roaming\

  Online: 15

  Char: 1

  error: internal error

  Code: 800A 0033

  Source: microsoft JScript runtime error

  How can I fix?
  Thanks in advance.

  Hello

  You can put your system to boot in order to check the issue.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista or Windows 7 by performing a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 3 of the above article.

  I hope this helps.

• Microsoft Visual c ++ runtime library error at startup. Runtime error! Program: C:\Windows\Explorer.exe

  Original title: Microsoft Visual c ++ runtime library error to star up

  Microsoft Visual c ++ runtime library error at startup

  Runtime error!
  Program: C:\Windows\Explorer.exe
  I can't solve this problem.
  I tried these solutions:
  I deleted all versions of Microsoft Visual c ++ s old and re-installed Microsoft Visual c ++ 2010 and all other microsoft automatic updates
  AutoFix used to define Internet Explore to the initial state (deleted programs side)
  Clean boot startup: error always happens after I uncheched all stars including Microsoft services services
  Start in safe mode: error persists
  Done a full virus scans (avira and f-secure online)
  I tried to restore Windows but there is error and can't do.

  Hello

  This error message or when you tried to restore Windows?

  I suggest you try to create a new user account and check if it helps.

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, here is fix a corrupted user account:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Microsoft Visual C++ Runtime Library Runtime Error at startup of Windows

  Runtime library

  When I turn on the computer and when it is actually loading information, I get this massage in a box. Microsoft Visual C++ Runtime Library Runtime Error!

  Program: Program Files \VERITAS Software\Update Manager\ sgtray.exe it\. How can I solve this problem?

  Hi patsyyanez,

  ·         You did changes to the computer before the show?

  These errors can be caused mainly by two factors:

  ·         The Visual C++ library runtime components are missing.

  ·         Software problem.

  You may I install the latest Microsoft Visual C++ redistributable package and look for the question. First of all, you can see this.

  For 32 bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 86)

  For 64-bit: Download Details: Package redistributable Microsoft Visual C++ 2010 (x 64)

• Runtime error - program: C:\\windows\system32\nvvsvc.exe at startup of Windows XP & shutdown.

  Original title: program: C:\\windows\system32\nvvsvc.exe.

  The States 'system had to terminate in an unusual way.  'Runtime error' this happens when I reboot or try to shut down my system.  How can I fix this error.

  I had the same problem, but for some reason, my screen is black, has nothing about it except for the cursor. I can't go into the Device Manager to uninstall and reinstall.

• BlackBerry Smartphones SmartView startup: Runtime Error!

  Whenever I start SmartView, as soon as I connect my 8330, a C++ Runtime window telling me that there was a runtime error and program "end abnormally."

  Someone else has had this problem and know what would be the cause? I tried to uninstall and reinstall...

  Help!

  Simon

  Solved!

  A time back I had uninstalled Desktop Manager as I found it annoyingly unnecessary. By reinstalling, SmartView now works correctly with my Curve 8330.

  Simon

• Startup error: Microsoft Visual C++ Runtime Libray - runtime error

  Original title: Microsoft Visual C++ Runtime Libray - runtime error

  Lately, once my computer is completely loaded up (and I haven't done yet), I get the error message: "Microsoft Visual C++ Runtime Libray ‑‑ runtime error." And it does not have a specific program that is the cause, it simply says "program C: /...» "How can I solve this problem? I use Windows 7.

  Hello

   
  Thanks for the reply.
   
  You must uninstall all versions of Visual C++ redistributable Package installed in the computer and reinstall the latest version of the 64-bit version of the redistributable Visual C++ from my previous post.
   
  Let us know if you need additional assistance.

• Adobe Acrobat 9.0 Pro hangs at startup: runtime error - please help

  I have CS4 from Adobe installed on my Windows 7 PC. In addition, I have Adobe Reader XI and InDesign installed 6. If I remember correctly, after that I installed Adobe Reader XI, I uninstalled the version of the player that came with CS4.

  So here's my problem: when I try to download a PDF file that was sent to me in an email or open one that already exists on my computer, in this case:

  Runtime error!

  Program: C...

  The application requested execution to terminate in an unusual way.

  When I click OK, I get this:

  Adobe Acrobat 9.0 has stopped working.

  If I try Adobe Acrobat 9.0 Pro in my Start menu, the same thing happens.

  It makes no sense for me because

  1. I don't have the knowledge to understand this. I don't know what is the duration.
  2. Before a computer collapse a few months ago and a complete reinstallation of everything that these programs all works beautifully.
  3. I do not understand why, when I try to open a PDF file by e-mail, they open automatically in Adobe Reader XI rather than Adobe Acrobat. The general idea that people is not being in a position open and view PDFs sent, of which they were sent, which is what the reader is for and generally do not change them, that's what Adobe Acrobat is for?
  4. If, instead of trying to open the PDF files by e-mail, I save them on my computer, I can launch Adobe Reader XI and open within the program without any problem. It's OK, if I just need to view the PDF file, but I have to be able to edit a PDF file also, so I need to get Adobe Acrobat 9.0 to work.

  Relocation of Adobe Acrobat 9.0 Pro help? Is it possible to reinstall only from the program installation diskettes or have to reinstall CS4 entirely?

  I can't open Adobe Acrobat 9.0 at all, for all the solutions that must be made when the program is opened are not possible.

  I would really appreciate the help.

  SOLVED!

  Reset Internet Explorer did not work, reinstall Acrobat 9.0 Pro didn't work, but change a fact registry key.

  Here is where I found the solution:

  Error Microsoft Visual C++ Runtime Library, opening files PDF - Microsoft Community

  Here is the message in question, but until you try it, read my post below:

  Hello

  This is known problem with Acrobat for several versions now, current fix from Adobe is just to update their software: http://kb2.adobe.com/cps/404/kb404597.html

  The problem is with the data of application given erroneous instructions.

  "The affected user has a folder Application Data redirected and so the path to the network that contains the Application data uses a UNC path that begins with \. "This UNC path causes Acrobat 9.0 and Adobe Reader 9.0 incorrectly analyzes the Application data path and give the error message.

  A possible Solution would be to go into the registry. Left click type 'regedit' and right-click and run the program with "run as Administrator". Go to Hkey_Current_User\Software\Microsoft\Windows\Current Version\Explorer\User Shell Folders and make sure see where pointing "AppData". If it is oriented towards 'data %UserProfile%/Application' change it to point to '% UserProfile%/AppData/Roaming '.

  BUT, be careful of one thing: this poster seems to have used accidentally oblique when he should have used backslashes. Look at the last line of his post where he advises ' if it points to "%UserProfile%/Application Data" change to point to '% UserProfile%/AppData/Roaming'. '. You can find, or at least I did, that this key has a backslash, not a slash, so change what I found: "%UserProfile%\Application Data" "% UserProfile%\AppData\Roaming" worked and now Acrobat 9.0 works very well.