RV016 referral of these two networks

Similar Questions

• Two networks

  Hello

  I have two computers connected to a router via LAN who access the Internet through it. Both are active DHCP.

  Now these lots of computers in the movies I want to watch through Asus O! Play Media Player. For this sake I had implemented another local network through another router and wireless LAN adapters in the computer. At present, this is disabled because it is confusing the system to be used for access. How to set up the second network. Should I put static IP addresses that are in the range the second router can detect which media player is connected? Or a best possible solution so that my computers should not plant? They are old enough!

  Thanks in advance. Any help is appreciated.

  Hello

  You need two network cards in the main computer, one connected to the Internet router, and the other connected to aregular port on the second router.

  The second card, second router and the Asus are configured on a different subnet. Second routerDHCP Off andOpen left WAN port.

  Computer main folders with movies etc. has set apart, so that they are accessible with the Asus.

  For example.

  Computers Internet router 192.168.0.1 on this router 192.168.0.x

  Second card of a main computer 192.168.20.1 network

  IP of the second router that is connceted to this basic 192.168.20.2 map

  IP of the Asus 192.168.20.3 gizmo

  Jack, MVP-Networking. EZLAN.NET

• Two network names on Windows 7

  Here, I will deliberately slow to set up a new network.  I have connected my Windows 7 Professional CPU who will act as my 'server '.  I start with a new router, so there is no confusion with the IP settings.

  On the device, I'm calling the server I have set up a network of work called 'Network 3.'  Don't know why Windows 7 chose the name 'Network 3.'

  I have 2 processors connected to the same router running Windows 7 Pro.  These two CPU show that they are connected to "Network 2".

  Should I worry that my "Server" (I don't know what else to call it) name the connection "3 network", but my networked computers call the same wired connection to be 'Network 2?'

  Thank you

  AS

  Hello

  No need to worry as long as you are able to communicate with all three computers on the network.

  
  For your reference:
  Start here to set up a home network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7

• Two NETWORK adapters on the host

  I have a windows xp host and he has two NICs. One is used to connect to the internet, and the other is used to connect to a private network of Novell.

  What is the best way to configure my VM Windowx98SE so that it can use both of these connections?

  If I have a single configuration network adapter on my VM and use NAT, I can connect to the internet, but not of Novell.

  If I have a single configuration network adapter on my VM and use Bridged, I can connect to my Novell network, but not internet.

  If I place two network cards on the VM and the whole NAT and the other to connected by a bridge, I can connect to Novell, but not internet.

  Any ideas?

  Thank you

  Josh

  Well, it turns out that the adapter "set" parameter is Global not by NIC so you must briing the real Publisher virtual network and create a second bridged VMnet, say VMnet2 and then jumpered VMnet0 and VMnet 2 to different network card.  Then caraa change the second NETWORK card in the .vmc configuration file to account for the bridged custom VMnet2.

  ethernet1.connectionType = "custom"
  ethernet1.vnet =  "vmnet2"
  

  To display the real virtual network editor in VMware Player 5 in an administrator command prompt, change the directory for VMware Player and use the following command.

  rundll32.exe vmnetui.dll VMNetUI_ShowStandalone
  

• SOA Suite 10g and SOA Suite 11g? What are the major changes in these two?

  Hi Experts,
  I'd be curious to know about Soa Suite 11 g. SOA Suite 10 g SOA Suite 11 g, BPEL changes? What are the major changes in these two product/tool wise? Is now OSB belongs to Soa Suite 11 g? It would be useful for us to know what are the major changes and updates or changes came to 11g.
  
  Please share this valuable information.
  
  Is it that no matter what version is still running Oracle, which has not yet officially launched with oracle?

  Hello

  I think that the most important changes are:
  1. move on Weblogic Server.
  2. creation of a unified period. Which means that everything plugs into it. SOA, BPM, OSB, B2B...

  Additional features like the NDA: Composites within network-based event. SDO: Service Data Objects to transfer information and from db, adf (if I'm not mistaken)
  Tighter integration with the ADF.

  A few extensions to BPEL. Such as the events of Signal etc. Don't know if it's standard or specific to Oracle extension.

  But you get the idea. A lot of changes, a lot of things improved and move functionality.

  For more information:
  http://www.Oracle.com/technetwork/middleware/soasuite/Overview/index.html
  For 11g PS1: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps1-new-features-096000.html
  For 11g PS2: http://www.oracle.com/technetwork/middleware/soasuite/soa-11gr1-ps2-new-features-097680.html

  I hope this helps.
  Kind regards
  Nils

• What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. Do I have to download these two files in the pictures folder is one duplicate of the other?

  What is the difference (if any) between iPhoto and iPhoto library? I managed to delete my pictures in freeing up space, but have a backup available. I need to restore these two files in the folder images or one is one duplicate of the other?

  I use a MacBook Air 2013 model with a backup on a WD MyBook Duo disc for storage wireless as the Apple Time Machine.

  The Photos and the iPhoto library are totally separated - neither one is connected to the other somehow--you want to restore the library you need

  LN

• I have Macfuse and NTFS - 3G on my new iMac 5K of the retina; OSX 10.11.4... I think I have migrated my old iMac. I need these two applications please.

  I have Macfuse and NTFS - 3G on my new iMac 5K of the retina; OSX 10.11.4... I think I have migrated my old iMac. I need these two applications please.

  Only if you use Windows formatted disks, and if you do, I would check the updates first.

• So, what are these two arrows that appear on some files, such as page files in the Finder?

  So, what are these two arrows that appear on some files, such as page files in the Finder?  I kinda afraid to hit one of them for fear that they're going to mess with the file.

  Could you post a screen so that we know what you're talking about!

• Can someone explain why these two paintings 'look' different even if they are from the same source?

  Hi all!

  I'm just curious, why these two tables are different and are they really different in terms of structure, even if they are from the same source? The left is the exit of tdms get properties and the other is a power of arry auto indexed.

  Nilesh-

  No doubt, you are referring to the visual aspect, since the data are the same. One of them uses a different type of indicator of the chain. You probably click right and choose 'create-> Indicator '. When you perform this LabVIEW will use the same style of indicator as what sub-VI/uses. In case you made directly from the PDM function, but the other was created between the autoindex loop tunnel for, in the second he used everything that was default in your preferences.

• My computer has been slow since last week. Somompany had to issue me a new card. These two things could be connected?

  My computer has been slow since last week. I have tried everything I have Know.My credit card company put a block on my card last Friday because someone stole my crecit card # and charged $1, 900.00.Could these two things be connected? And why my computer is running slowly. Thanks for any help.

  Hi Faye,
  Your computer might be infected with a virus. Try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• problem of installing active sync 6.1 64-bit with active sync. you have a known issue with the compatibility. you have a work around where the way to get these two together?

  problem of installing active sync 6.1 64-bit with active sync.  you have a known issue with the compatibility. you have a work around where the way to get these two together?

  See: http://answers.microsoft.com/en-us/winphone/forum/wp6n-sync/microsoft-windows-mobile-device-center-61-driver/4cd26ba2-9583-47b7-b5e7-32b382cee0b2

• Why these two loops while cannot work at the same time?

  I place two same while loop in the block diagram, and then use highligt and one-step run function to observe their parallel operation.

  But I discovered that this two loop operate alternately and cannot operate simultaneously.

  Can someone help me understand this?

  My software environment:

  OS: Windows XP SP3

  LabVIEW: student editions 2011

  CPU: intel P8400

  Hi, GerdW

  Thanks for the reply

  I post a video to illustrate my question.

  While I press a strong of the run, I find that these two loops does not begin at the same time.

  While the execution of a loop, the border on the other became dark.

  It seems that during an iteration in loop 1 run, the loop2 keep waiting. and then the loop2 iterate while loop1 keep waiting.

  I do not know why this happens

  Sincerely

• I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.

  I have two vista windows oem sctatch disk at home. You can download it for me, these two are with the product key to the House.
  It is upgraded, the other is an integer telling Windows Vista;
  and the little hard up and down, mouse from left to right,.
  or can you please sent a copy of a disc to my address, this is the right path for fixed my windows vista online.
  (try to contact technical support of the direct Vista operating system)
  How about upgrading to windows 7? Give me the vista on 'the base drive OEM' continues for facilities?
  ----------------

  Replacement OEM or software support of system manufacturer in most cases, you must contact the OEM (OEM) manufacturer or the manufacturer of the system directly to replace Microsoft software that was distributed by your computer. However, an exception is made for operating system service pack media *, for which you can contact us directly.

  • Contact information for the manufacturer of the computer, see the Microsoft Web site at the following address:
    http://support.Microsoft.com/default.aspx?pr=oemphone (http://support.microsoft.com/default.aspx?pr=oemphone)
  • If the product has been distributed by an OEM or a system integrator, the product ID contains the letters "OEM". Visit the Microsoft Web site at the following address, select the appropriate product family, and then follow the steps to find the product ID:
    http://support.Microsoft.com/default.aspx?PR=notsureoem (http://support.microsoft.com/default.aspx?pr=notsureoem)
  • For OEM software, the certificate of authenticity (COA) lists the name of the manufacturer of the computer under the software version name. For more information on the certificate of authenticity, see the Microsoft Web site at the following address:
    http://www.Microsoft.com/resources/howtotell/ww/FAQ.mspx#1 (http://www.microsoft.com/resources/howtotell/ww/faq.mspx#1)

    If you have System Builder software, the COA lists "OEM software" or "OEM product" under the software version name.

  * Note Service pack support only includes what is associated with the service pack itself.

  More information: http://support.microsoft.com/kb/326246

  Regarding Windows 7 - frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx TaurArian [MVP] 2005-2010 - Update Services

• Controller PCI Modem & SM Bus these two haveYellow of devices? "s in Device Manager

  PCI Modem & SM Bus controller. These two haveYellow of devices? "s in the Device Manager.

  Just did a clean install of Win XP Pro Service pk 3. Other device driver problems fixed, but am struggeling with two damage previously mentioned.

  Help me please. Thnx Ben

  Hello

  · What is the number and the model of the computer?

  Double-click the device and search for the exact error message or error code in Device Manager.

  You can see the links below and check if it helps: Troubleshooting conflict of devices with Device Manager: http://support.microsoft.com/kb/310126

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

• correct settings for two networks?

  I have a desk that has a building at each end of the city.  I have a wireless bridge that connects the buildings.  Each building is on its own ip configuration and has its own internet connection.  I have a server for A construction program.  I want to be in the B building clients connect to this server, but still use internet and print to printers on their own network.

  Right now the wireless bridge has the same addresses as a. construction I also fooled with assignment of two for each clients network adapter ip addresses.  This works fine, except that I see only computers B building in the Working Group, and I don't know if its using internet of B building or A building.

  Building A uses 192.168.5.x - 255.255.255.0 - 192.168.5.1

  Building B uses 192.168.10.x - 255.255.255.0 - 192.168.10.1

  Any help is appreciated, and I can give you more information if necessary.

  Hello

  I don't know what hardware you are using specifically. Regular Bridging could not do you need a device for routing between two independent

  Networks that are on a different subnet.

  If the two networks are bridge successfully to act as a coherent networks (same subnet), choose which Internet connection would be used by each computer can be made by assigning static IP addresses and gateway entrance to TCP/IP on the computer the IP number of the router as the Internet should be used,

  Passing by the details beyond the scope of the forum of support to end users. If the above do not help, you should get a consultant on-site.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET