RV042 Port forwarding stops working when the firewall is turned on

Similar Questions

• based on the redirection port has stopped working after the upgrade of Capitan 10.11.3

  I have a web service running on a VM (virtualbox VM), which I can access on my mac via 192.168.99.100:8000. The mac itself is tuned to 192.168.1.2. To port 8000, I set up a redirect on the server (Server version 5.0.15 OSX) Web sites pointing to 192.168.99.100:8000. It works, as long as the conscripts of the Mac (even when called from another virtual machine on this mac).

  However, redirection fails when you try to access from other computers within the 192.168.x.y space, or when it is called from the internet.

  ... I add a few comments on what has been checked so far:

  -port 8000 is open to the router

  -OSX El Capitan (10.11.3) firewall application is disabled in system preferences

  -OSX Firewall adaptive server is disabled (using sudo /Applications/Server.app/Contents/ServerRoot/usr/libexec/afctl - X)

  -by checking port 8000 canyouseeme.org it is recognized as open

  ... still, the request never machine made...

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• USB ports have stopped working on the Satellite C

  Hello. Just turned on my laptop and found that the USB ports hafe has stopped working. No mouse and no external storage. Any ideas?

  What USB port status is visible in Device Manager?
  Are no yellow exclamation point visible?

  Expanded the USB hubs and region of controller and remove all the listed USB ports / controllers from the list of devices.
  After that, restart the device.

  The system should reboot and the USB ports should be recognized and installed automatically.

  Try this workaround short and report results.

• In Vista, you receive the error message "Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working" when the windows sartup

  I get this error message when starting windows - the message is:

  Vandenberg Clyde Punjab Scottsdale Columbia Watertown Hebrides has stopped working and I'm not that mean?

  and since i ' v got this message I can't use internet explore properly and when I lick the icon to lunch the internet explore I have a blank page, but if I do a right click on the internet icon one select run as administrator, it works without any problem can someone help me?

  Ahmed atta

  Egypt

  Hello

  Please let us know if you are facing problems when you use Internet explorer on the computer and is the fixed startup error number.

  Use the method to send the snapshot to the question below.

  Use capture tool to capture screenshots

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

  Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

  Hi cdk14031

  
  You have set display up-to-date drivers installed?

   

  Step 1 :
  To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

   

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  You can also check the support link and check if these help - below

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  I hope this helps.

• Flash Player stops working when the computer is restarted. Why? It is always enabled.

  Why is Flash Player stops after restarting the computer to work? I have download Flash Player several times a day. Norton is the cause? When I re - download, I get a message that I have not sufficient user privileges, but it solves the problem, anyway!

  Unlocker is my go - to for fixing the files in this State.  It is probably easier to do it manually: Unlocker - free download and software reviews - CNET Download.com

  That said, the permissions being stripped on files is a symptom, not a cause.  You might get away with the lock and blowing these files and things will work normally after that.

  The point I want to drive home, it is that it would be smart to take advantage of the opportunity to save something essential.  You could just as easily be the first signs of catastrophic disk failure.  Having lost my share of data that has not been backed up, I always count these early warnings as gifts and take seriously at this point.  There are many good solutions free/good market online (especially if you don't have a lot of data that you really care), as well as traditional approaches to removable disk.

• Stops working when the 'commissioning of the signs... ". »

  You just bought Adobe Creative Suite 5.5 Design Standard.  InDesign won't load.  I get the error message:

  Adobe InDesign CS5.5 has stopped working.

  A problem caused the blocking of the program works correctly.

  Windows will close the program and notify you if a solution is available.

  Illustrator and Photoshop, load and seem to work very well.  (Does not go beyond loading program.)

  I've uninstalled and reinstalled the suite but still can load only Photoshop and Illustrator.

  InDesign will stop loading when it gets to the "marketing of the signs...". »

  I change the resolution, so that my monitor displays correctly.

  Any suggestions?

  Thanks John - I tried the Ctrl/Alt/Shift thing, but he did not respond at all and went straight to the error message.  So, I decided to see if I could save the InDesign defaults from my old hard drive, because he had no one in the new facility to rename.  It was recoverable from the old installation, so I put it in place where it should have been on the new computer, and voila, InDesign launched correctly.  I guess for some reason any, it was not installed with the program in the first place.

• SimplePass scanner stops working when the laptop sleeps

  Hi, I have a Pavilion m61045dx notebook for Windows 7 64-bit.  I managed to get any installation Simplepass chose Google Chrome as a browser, because it seems that Firefox does not support this version of Simplepass 5.4, and then the fingerprint reader has stopped working.  I found a suggestion on this forum or another, can't remember now that said to go to the Device Manager and choose the validity and under power management sensor, uncheck the box "allow the computer to turn off this device to save power".  Rebooted as directed and Voila! validity sensor works again. But now every time that the computer will sleep the validity sensor does not power back upward with the rest of the computer.  Whenever this happens, I was able to make it back by going to Device Manager and the deactivation and reactivation of the validity sensor and then restart.  But seriously, what a pain.  Any suggestions?  I'd be happy to find that it is just a matter of setting, but failing that maybe an update to the latest version for my machine.  Unfortunately, the software Simplepass has no option ' check for updates ', or device driver updates either.  Any suggestions?

  Please disable power saving mode for USB in Device Manager.

  · Click on Start Orb > typeDevice Manager in the search box

  · Click Device Manager in the search results

  · Expand USB root huhb > right click on your mouse > clickProperties

  · Click the power management tab

  · Uncheck allow the computer to turn off this device to save power

  · Click OK

  that you change the power supply for the USB options.

  Here are the steps to do so.

  http://www.SevenForums.com/tutorials/147369-USB-selective-suspend-turn-off.html

  disable the mode of suspension from there...

  Hope this helps, good luck!

• Photoshop "Stops Working" when the text tool is used.

  Whenever I try to use the tool to type in photoshop, I get a window indicating that Photoshop has stopped working.

  I have not yet installed the new fonts, this is a new laptop.

  What I do do ti fix this problem?

  I have Photoshop CS5.1 64 bit and I'm running on Windows 7

  A corrupt police?  This happens. I just found this old thread:

  http://forums.Adobe.com/message/2845553

• E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

  I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

  Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

  So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

  smammy,

  Click on the link below for a possible resolution following on problem of your computer network settings.

  How do I enable Wake on Lan on Windows 10

• Menu stops working when the course is over

  Captivate 6, never send resume data are not checked, published for AICC. Course titles and restarts correctly until I get to the last slide. At that time, when I raise, I go to the last slide (which is expected) but I can't use the menu to return to an earlier point in the course. The menu opens, the slides are links, etc, but when I click, nothing happens. The project is implemented to stop the project at the end.

  Has anyone seen this?

  OK, so my next suggestion is to check if the Skin Editor is defined for the table of contents allow navigation only to slides that are visited.  Maybe when get you the course module and the LMS bookmarking shunts you have too to a later slide, the fact that you have already visited the previous slides is not in the content.  This means you are stuck on this later slide and the table of contents do not allow you to click on the items.

  If this isn't the case, it's maybe a problem with your LMS.  Publish the same SCORM Cloud modules and test to see if the same problem arises here.  Try to use SCORM AICC intstead to see if the bookmark is handled differently.

• WMC 7 stops audio when the TV is turned off

  I have a Win7 Media Center installation on my Plasma screen, no other monitor. I want to play music through my stereo, not the TV. After I start playing my music, so I want to turn off the display - its 300 Watts. But a few seconds after that the screen is off, the music goes silent. As soon as I turn it back on, the music will resume.

  How can I me Media Center to ignore the screen and goes to sleep?
   
  Continuous thread:
   
  WMC in Windows 7 will not play audio without monitor

  I want to choose a playlist, and then play the music with the monitor (plasma screen) is off. But a few seconds after I physically turn off monitor, WMC goes to sleep. He wakes up and starts to play again if I re - turn on the monitor.

  Is there a way to configure WMC to stay awake and continue to play music even if there is no attached monitor, i.e. headless workstation?

  NOTE: I do NOT use a distance of WMC to disable anything.

  m.

  This is because device is selected by default. Go into the mixer and select another output device (speakers, for example).

  See you soon,.
  Jerry

• Moto G4 - push notifications to stop functioning when the phone is idle / inactive

  Hello!

  I have a very annoying problem with my G4 bike purchased in the UK.

  Problem:

  My push notification comes to app and gmail to stop working when the phone is idle / inactive.

  When I use any application or when I put just the phone side push notifications work fine. They appear on the lock screen and beep.

  After a few minutes of not using the phone, the message to stop the spread. The sender indicates that a tick and the Moto G4 does not show notifications of type push until the phone is activated and unlocked. It is very annoying, because I already missed several attempts to call. This problem occurs with the Wifi or data plan. It is not a What'sApp of settings as it works very well for a while.

  Text messages and phone calls work well, just a data plan seems to go off when idling and never come back until unlocked (even then it takes a while). WiFi seems somehow to maintain a connection.

  I tried:

  • change What settings the sApp
  • disconnection/connection gmail account
  • remove the operating system of the device cache
  • disable the whats of ap battery saving options and all services appear to be relevant
  • WiFi seems somehow to keep the phone, but only data stops immediately, sending fn when idle
  • Restart in safe mode-> the same problem with meeting places. WiFi seems to work, data plan do not when idling

  Is this a known issue? Everyone knows the problem? To me, it seems that the camera seems to move from the internet and do not reactivate until this that unlocked.

  Any suggestion would be appreciated,

  Thank you!

  It seems to work now after clicking: 'Reset the settings App' in the top menu right in "parameters - apps-> gear-> battery optimization"!

  I haven't seen this solution anywhere else. I did the reset done only because I tried to disable optimization for almost all applications gradually. Without success, I clicked on 'Reset the settings App' and suddenly push notification for all work! Yes!

• Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

  Dear Sir/Mam...

  I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

  Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

  You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

  I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

  To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

  When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

  Colin Barnhorst