RV110W wireless AP

Similar Questions

• Problem comments RV110W wireless network access

  Hi all!

  I am facing a problem that was not represent earlier, and I can't solve this...

  We have a small business running an apartment as a business next door. To provide access for guests - separated from the SME network, that we have created a wireless network of comments on our CISCO RV110W router which worked well for months. But for more 2 weeks now on the network of comments simply do not accept the password set in the router management console - I tried to change it, but without any proogress, also restarted the router several times - no effect...

  Anyone have a suggestion, what happens?

  Details:

  Updated firmware to update to the most recent available on CISCO's Web site. (1.2.0.10)

  Screencapture of the basic Panel Wireless of the management console:

  

  ( http://i40.tinypic.com/2lm6x53.png )

  Screencapture of the parameters of the management console Net comments:

  

  ( http://i41.tinypic.com/2lxilbc.png )

  Password complexity checking is disabled, it cannot be the root of the problem.

  And the error message we receive when you try to access internet from comments:

  

  ( http://i40.tinypic.com/ek21kx.png )

  I don't know what to do, but hit my head against the wall...

  Thanks in advance for your help.

  Hi Pal, another thought perhaps to factory default from the router then see how it behaves. I see no reason why it work for so long, and then stops working unless perhaps something is damaged in the software.

  Were there any configuration changes from when it works and now does not work? Add or remove of anything?

  You can try to factory reset the router and see if it works then?

  -Tom
  Please mark replied messages useful

• AnyConnect licenses for Cisco RV110W

  Hi all

  Thank you in advance for taking the time to respond - I tried for the last hour and seek more information on the AnyConnect client for an entry level firewall - CiscoRV110W, but I'm still confused.

  To say simple things, my questions are:

  If I buy this firewall of entry-level VPN connections supports 5 + 5, can users download the AnyConnect client and connect to the VPN for free (once it is set up), or do I have to pay extra for the AnyConnect licenses? How much would that cost?

  My experience with AnyConnect has been so far limited to the end user, use it to connect to the network through the VPN at work, but now I take into account set up something similar for a small office with a few teleworkers.

  Connection of the device:

  http://www.Cisco.com/c/en/us/products/collateral/routers/RV110W-wireless...

  I already read the FAQ for AnyConnect, but it is still is not clear.

  Thank you for your time!

  Hi mmihai.toma,

  As far as I know, is not supported on devices RV Anyconnect.  If you want to use Anyconnect you must have a Firewall ASA or IOS, router IO - XE.

  According to the documentation it looks like the only VPN options for the device of RV are: quick VPN, Site to Site, and PPTP.

  It may be useful

  -Randy-

• Question about the RV130W compared to RV110 & RV215W

  Hey,.

  I decided between the following routers; the RV130W ($220 ~), RV215W ($140 ~), & RV110W ($110 ~)

  Then my agent support call referred to as Gigabit RV130W, being the best and fastest according to him. He also told me that the RV110W of RV215W & are Fast Ethernet. My questions are, what is the difference between Gigabit and Fast Ethernet? Is it worth paying the extra $80 - $ 110! ~ to the RV130W and why.

  Edit: My office building has a few different rooms with between the two walls, we to a maximum of 10 people connected at once and as far, it should go is about 50 ft.

  Thank you

  Matthew

  Hello

  Concert speed is 1000 Mbps (megabits per second) and Fast Ethernet 100 Mbps.

  Thus, the concert is 10 times faster.  Yes, the fastest speed is recommended for performance.

  The RV130W will give you the best performance at all levels.

  -Better throughput on the Internet

  -Best speed in the network internal

  -Stronger antenna with a dBi gain 2 verses 1.8 on the 110 and the 215W

  -Several advanced features with more options VPN

  Here is the link to the technical data sheets:

  RV110W:

  http://www.Cisco.com/c/en/us/products/collateral/routers/RV110W-wireless...

  RV215W:

  http://www.Cisco.com/c/en/us/products/collateral/routers/rv215w-wireless...

  RV130W:

  http://www.Cisco.com/c/en/us/products/collateral/routers/small-business-...

  Best regards

  Mike

• RV110W and WDS

  I have a RV110, and I am interested to extend the reach of the WiFi using WDS function.

  Simply indicates the data sheet RV110W... "can wireless be repeated signals by up to 3 compatible devices,"

  Where can I find these "devices", and has anyone had success using WDS with any APs of the range of SMB products?

  Thank you

  Hello Chris,

  All Small Business support WDS Access Points.  You can take a look at the different models of AP here:

  http://www.Cisco.com/Cisco/Web/solutions/Small_Business/products/wireless/index.HTML-tab-AccessPoints

  I have install WDS for several clients successfully.

  The only thing to keep in mind is that, for each position (or access point) that you repeat until the line speed on the remote will be reduced by half.

  Also several of thewireless routers support WDS, so you can use another RV110W for example.

  Let me know if you have any other questions.

  Christopher Ebert

  Network support - Cisco Small Business Support Center Engineer

  * Please note the useful messages *.

• RV110W access point / bridge mode?

  Hi guys,.

  I have a few questions on RV110W.

  I would like to install wifi on my local network access, I have gateway with wan, web filtering etc. etc.. I just want a good wifi access point.

  So why I want to equip with a RV110W and not a normal access point? It's just my boss want mandatory limitation of the internet access of planning by hours, days ~ ~ and guest access. Another detail, my local network have not all dhcp.

  So, in the first place. Can I plug my lan rj45 on switch of RV110W port for internet by my current gateway?

  If I set the limitation of the internet, has done this job of feature on switch port wireless access?

  If I put the dhcp on RV110W (for example 192.X.X.5 to 192.X.X.10) and I identify the ip address on my other gateway for internet access (filtering fortigate), can I put the dhcp on RV110W only on wifi or it will assign ip on other devices on my LAN?

  Thank you very much!

  Hi Ash, you can connect the RV110W by a switch port to another router.

  Dhcp RV110W is not customizable to the point where you can specific to your other router IP of the gateway.

  If active RV110W dhcp would provide DHCP what accept DHCP.

  You may want to look into WAP121 or WAP321.

  -Tom
  Please mark replied messages useful

• RV110W DHCP issue?

  Rv110w, I have 4 VLANS.

  vlan3 feeds a mute switch and a wireless access point. Looking at the router DHCP leases, it shows connected and non-connected devices. A little as it does not refresh the list. The 50 value leases. Questions: Is this normal? How often to refresh? -What time DHCP set like minutes?

  Thanks a lot for the provision of related information.

  Well, if you have 50 IP pool and 50 users connect and disconnect in the day, I would expect that you can escape. I put the DHCP lease for 1 to 2 hours, so you can keep a constant "Refresh" of this and this problem should disappear.

  -Tom
  Please mark replied messages useful

• After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

  Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

  Batteries.

• New Magic Mouse (wireless) works erratically

  New Magic Mouse (wireless) said low battery but it does not use a battery? How to charge it?

  The Apple article below should help.

  Recharge the battery in your Apple - Apple Support accessory

• Can I use the Time Capsule wireless for multiple computers without using it as a router?

  I am looking for an external backup for 2 computers drive.  I have a desktop iMac and MacBook Air.  I like the idea of being able to back up my MacBook Air wireless, but I need to make sure that it will work the way I need to.

  I already have a wireless router that works well for me, I don't need the time Capsule to act as a router. I'm just needing a wireless backup drive.  So, the question is, can I use the only time Capsule as a storage device for backup of wifi or do I also have to use it as a wifi router?  My fear is that the router service is not as good as the router, I currently have.  I live in a big House of 2 floors, making it very difficult to receive a strong signal throughout the House.

  can I use time Capsule only as a backup wireless storage device or do I also have to use it as a wifi router?

  Time Capsule need to connect to your router/modem existing using wired Ethernet wired, permanent.

  If you plan to use the time Capsule to back up your Mac with the help of the application Time Machine on every Mac, the Mac will have to save on the wireless signal Time Capsule for the process to be officially supported by Apple.

  While it is possible to turn off wireless on the Time Capsule and try to save it to your existing wireless network... and it pourrait work... but there will be no Apple support backup problems... so it would be a good idea to plan to use Time Capsule wireless backup purposes.

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• Bridge of Airport Extreme wireless

  Hi all

  I have an airport extreme and I wanted to install a wireless bridge.

  IM on the 2nd floor and my router is on the 3rd floor

  my wireless signal is weak on the 2nd floor, so I wanted to bridge so that I get full signal wireless 2nd floor also

  I do not want to use cable (from the router to the most extreme airport)

  can someone explain to me how to do this

  Thank you

  Hi irfan_mu,

  Check this help page: AirPort base stations: install and configure a wireless network extended (802.11n) - Apple Support

• Add a preferred wireless network

  I want to configure the wireless preferred networks on a pool of 25 computers at once while no users of the console/GUI/admin is entered, that is to say the computers are provisioned waiting on the registration screen. All computers are properly configured for access "remote management".

  I'm looking for something in Apple Remote Desktop to add some favorite wireless networks with the terminal command "networksetup" to these remote computers

  I got the terminal command:

  sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password

  Any help?

  Hi basil,

  -Something that should work can use the ARD from the Mac Admin officer, to run ssh sessions by officials of the ARD on clients, and then run the Terminal command.

  -J' used a script like this before restart locked ARD Agents on clients via ssh.  No GUI sessions running on the clients.

  The script Unix in ARD would be similar to:

  for N in 'client1.local' 'client2.local' 'clientn.local '.

  do

  {

  SSH '$N' 'sudo networksetup - addpreferredwirelessnetworkatindex en0 ssid 0 wpa2 password.

  }

  fact

  -The script is run using an adminuser which is available on each client with ssh keys setup (no password) and an entry in/etc/sudoers so the sudo command prompts nor a password.

  -L'adminuser can be activated for this task in a separate script:

  Disable: chsh s operation adminuser

  Administer enable: chsh-s/bin/bash

  hope this helps, dwbrecovery

• IPad mini is not connect to Wifi wireless

  Mini Wireless iPad (iOS 9.3.5) does not connect to the wifi at home but for printer and android phone will be. Have you all on iPad and mydlink router resets.

  Action taken:

  WiFi connected in Apple store - Rep suggested that make a backup and then restore iPad at home.

  Results:

  Can not stop to find my iPad / "check failed: there was an error connecting to server Apple ID.

  Several attempts, the problem persists.

  Looking for suggestions.

  Hi RubyBlu,

  I see you're posting here because your iPad mini Apple Support communities is having problems to connect to your home Wi - Fi network. You talked about since someone at the Apple Store that you said to try to restore your device using iTunes, but you can't not to disable find my iPad to be able to do. I know it's important to be able to connect to the Wi - Fi at home, and I'm happy to help with this.

  As a first step, I recommend take a look on this website and perform these steps in the order, if you have not tried them already:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  If you are still looking to restore your device to factory settings, I'd recommend double-checking to make sure that you have a current backup of first. This is a resource for that if you need a refresher on how to create a back up:
  The backup of your iPhone, iPad and iPod touch - Apple Support

  Before you can restore your iPad, you need to follow the instructions here to disable find it my function for your iPad:

  Delete a Mac or iOS device on which you can not disable Find My iPhone

  If you can't disable find my iPhone on the device, turn off the unit so it will Disconnect, then remove of Find My iPhone on iCloud.com.

  Note: You can also delete your iOS device by clearing the first - just follow the instructions below to remove an iOS device, you do not have. You can later restore the device of an iCloud or iTunes backup.

  1. Turn off the device you want to remove.

  2. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  3. Click on all devices, select the device offline, then click on delete account.

     

     If you don't see a delete account, click again on all devices, and then click the Delete button next to the device.

     If the device comes online again, it reappears in find my iPhone. If your device again, turn off find my iPhone on the device (follow the instructions above to remove a device by disabling Find My iPhone), or if it is an iOS device and you no longer, follow the instructions below to remove an iOS device, you no longer have.

  iCloud: remove your device, Find My iPhone

  When you have selected "Delete account", you should be able to restore the device normally using iTunes.

  Take care!

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.