RV180w - CPU at 100% all the time

Similar Questions

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Quad processor running at 100% all the time

  An old friend has processor quad with 8 GB of ram, but its computer is almost unusable because the processors operate at 100% all the time.   She has more than 20 processes running (no application running. other than the Task Manager  System Idle is not one of the processes.  I ran Malware Bytes - did not help.  A process that takes 8-23% is ' ddazpfwlqwv.exe.  I can stop it, but it is immediately and I can't find anything about it.  I went into msconfig and disabled everything I felt comfortable making; but then again, no help.  In addition, she continues to pop-up windows ' security alert - your level of security does not allow this download unfold. "  These popups (up to 5 simultaneously) even appear when a download is in progress.  I fear that she has been affected by something that is trying to take over his computer.  Looking for suggestions.

  Cleve

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• 110 HP CPU Office works 100% all the time

  HP 110 Desktop PC AMD E1-1500 accelerated processor CPU runs at 100% at all times, win 8

  Hello grtgtrplyr,

  I understand your processor is constantly working to 100% and you are looking to fix. I'm you provide a HP support document: using Microsoft System Configuration (Windows 8), which will guide you through to disable startup items and Services in your system that may be causing the problem. I would recommend that once you have disabled any of this case the question constantly you then start reactivating the Services items and commissioning until you determine which is causing the problem. You can re-enable one at a time or in groups to refine more quickly. Once you know what Service or startup item is causing the problem, you can search a solution for it.

  If you wish to help with this is you please re-post with the Service or startup item and I'll be happy to help you. Thanks for posting on the HP Forums. Have a great day!

• Since the update to 3.1 (Windows XP virtual) CPU resources at 100% all the time

  I had the latest version works perfectly, and since I have updated to version 3.1 my Windows XP SP3 is too slow with 100% of CPU resources during the first 3-5 minutes. After this time, there is a 'system' of the process of the SYSTEM user that starts in almost 40% of resources.

  In summary, the worse performance than the previous version...

  Hello

  It is not quite normal.

  Your description makes me think that there is something wrong with your vmware-tools Setup program.

  I suggest you completely remove the VMware tools, reboot and then re-install vmware tools.

  You can take a snapshot of your VM current before that (and he commit after you complete the procedure)

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• After a virus infection, the App Data/Roaming/swcltb.dll is missing from my computer and the fan use 100% all the time

  Here's the problem:

  My computer was happening slowly, so I did a virus scan and it turned out that my firewall has been closed and wouldn't load up. So it took me some time to solve the problem by following these steps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-firewall-cant-change-some-of-your-settings/2679690e-c375-4232-ae45-404374386635?page=6 naernxp post, it solved the problem.
  Naernxp suggested from virus scan so I Redid the scan for malware and all then it deleted the file swcltb.dll. I thought it was the virus so I ignored it, but after restart pc my firewall has been set, but the computer showed that the swcltb.dll file is missing and CPU usage was 100% nonstop.
  Before that virus scanning, my CPU usage was normal.
  RAM: 2 GB
  Processor: Intel (R) Core (TM) 2 CPU 6420 @ 2.13 GHz

  This file is not a base file MS Win, I suspect it is a residue of the infection

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• Tecra A11 speed on the fan at 100% all the time

  Hi, one of my colleagues has a new notebook Tecra A11. I've recently updated the bios to version 2.60 and since then the fan is constantly at full speed. Before the update it would be noticeable when the laptop has been widely used, but would slow down when idle. Anyone else seen/had this problem? I wouldn't mind flashing back to the old bios but can not see available on the web site of tosh.

  Thank you

  Hello

  In your case, I recommend setting the BIOS to the default value.
  You can do it in the BIOS. Insofar as I'm sure you could get press F9 default.
  But the option is mentioned in BIOS to verify this.

  In addition, I recommend changing the CPU and cooling module in Windows Power Options.

  This should help to reduce the speed of the cooling fan.

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• W7 100% CPU all the time - what can I do about it?

  Hi and thanks in advance for the help. My computer has very little memory, so I keep it really clean. Do just about everything with him, it is browse the web and stream media. Recently, it has been very slow, and Firefox (49.2) has suspended all the time. At first, I thought it was Firefox, and I followed all of their instructions to identify the high resource using plugins, etc. I deleted the history, ran CCleaner, etc.. Then I realized that even if I close FF I always see spikes frequent (approximately five seconds) to 100% CPU usage, and it often extends by 50% even if I don't do anything. I ran Avast and Malwarebytes and MSE - full scan with each of them and none of them found nothing. Is it possible that my computer resources is hacked and used by someone else?  As for mining bitcoin or something else?  How I understand this and stop it?  If it is little likely, what can I do to improve performance. It seems kind of ridiculous that open a document or a web page to "forever".  Even to write this post, I type, and then look at the screen, while the letters slowly appear...

  Not sure what is relevant for the problem, but I have 4MB of RAM, but the single 80 GB hard drive (hope I said that right), which only 29GB is free. Right now I am 1480 Cached, available from 1725 and ~ 320 is free, there are 69 total running processes. The only applications that are running are FF and two documents LibreOffice.  I checked a few days ago, and the system says that I don't have to defragment.

  I don't even know if all this has nothing to do with the peaks of the processor, so it's how little I know!

  Any help is very appreciated!

  Try running task Mgr, looking for running applications, locate the (s) using all the resources, R.click on this subject,

  Properties, see what/why use that much... In addition, 69 process is quite a bit, will try to run or cmd,.

  type: services.msc scroll through, double click on one, properties, clear the value or manual start. Manual start

  Are available on request. Also, open the event viewer, get the details of the operating system, looking for event/warning,.

  R.Click, Properties. Also streaming video uses a lot of pc resources.

• Satellite L500-1XL - high CPU usage all the time

  Hi all

  I've owned the L500-1XL for over a year now and I recently encountered a new problem: for the last few weeks, the laptop everything can become very, very slowly. Everything I do, the laptop freezes and may stop responding for a few minutes at a time. Regardless of the application I see is to do so in the process manager, stop it, but then another application steals all CPU - this isn't a particular application...

  -I'm crazy about security and make quick analyses and complete analyses frequently, including spyware and rootkits scans startup
  -I update drivers all the time, but have already re-installed all the drivers that came with the laptop and no change.
  -J' recently added more RAM and a new hard drive internal, but this problem existed before the new facilities
  -J' tried SP1 installation integrated in a Windows 7 disc and installed, and I noticed the problem of CPU for the first time then. If after that when I put in new hard drive I used the Windows Installer disc which is come with the laptop instead and in no time the problem comes back.
  -J' have uninstall the applications that I don't use and there is not a lot of new applications on my laptop that I am not familiar
  -J' tried it a bit on the internet and it is a very common problem, but I still don't know what to do

  This happened to someone? Someone at - it ideas? I would be very grateful, it starts to drive crazy me! My laptop is not my laptop when it wastes my time...!

  Hmm hard to say what's wrong here
  In the Task Manager, you can check the process that locks the CPU and use the whole performance of the CPU.
  You can google for this .exe to know what software or application uses this process.

  Theoretically, it could also be a virus

• CPU fan runs at 100% of the time

  Hi all

  I have a B570E Lenov and I noticed for the last few days that the fan on the processor works all the time, I loaded and checked the CPU temperature. and it's at 45 Deg C How can that I solve this problem?

  Thanks in advance.

  Hi Quintin_cloud,

  It is the only option to remove dust aprt to open the case. If you comfortable opeinig the case, then you can consult the hardware manual and check.

  Click here to see the manual.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin. S

• Jet Pro 100 MFP M175nw, is the Green standby light supposed to flash all the time

  Jet Pro 100 MFP M175nw, is the Green standby light supposed to flash all the time standby

  When the Green led is flashing, the printer is telling is in stand by mode. It should turn solid when a print job is sent to the printer. Your printer works as expected

• CPU Ussage on 99% all the time

  After installing SP3 everything works too slowly. I have to wait about 3-5 minutes after startup

  word or excel te...

  In the task/process Manager shows all the time CPU ussage on 99%.

  Image - system, the name user - name SYSTEM, 99% CPU

  I tried to put an end to this process, everything has worked more quickly.

  I couldn't stop this process permanently. What should I do?

  Where is the problem?

  Thank you.

  R61, Core 2 Duo - T7250, 2 GHz, 778 MHz, 1 GB RAM, XP Pro

  Antivirus: NOD32 ESET

  Firewall: base windows

  I denied automatic back-up, as I removed all accept sofware by Lenovo with fingerprint sensor. It looks like all this work more quickly.

• SVCHOST is keep my 30% CPU all the time!

  My CPU is housed at 30% all the time because of SVCHOST constantly running. There are multiple instances (usually 2 or 3) to operate and my CPU usuage never less than 30%. I watched until it SVCHOST is intended and have decided that I should not stop anything that has to do with it.

  Is there any fix out there to keep it from eating my system resources, or is it just a natural part of Windows now?
  (currently under Vista, even though I have this same problem on my laptop, which is running XP)

  Hi wildgamer,

  We have collected some imformation from the Microsoft Help and how article from the link below which will help you to know which services are used by various instances of SVCHOST.exe are running on your computer.  From there, you can decide if it would be a good idea to stop these services or not.

  Of the atricle:
   
  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.

  To view the services that are running under svchost.exe

  1. Open the Task Manager by right-clicking the taskbar and then click Task Manager. 2. Click the processes tab. 3. Click on Show processes from all users. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. 4. Right-click a svchost.exe instance and then click on reach or services. Services associated with the process are highlighted on the Services tab.

  What is SVCHOST.exe?

  This is probably a good idea to leave things as they are, if you are not noticed problems of performance for this reason, but it will tell you what services are used by svchost.exe.  Please let us know if you have any other questions.  Thank you. Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.