110 HP CPU Office works 100% all the time

Similar Questions

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Since the update to 3.1 (Windows XP virtual) CPU resources at 100% all the time

  I had the latest version works perfectly, and since I have updated to version 3.1 my Windows XP SP3 is too slow with 100% of CPU resources during the first 3-5 minutes. After this time, there is a 'system' of the process of the SYSTEM user that starts in almost 40% of resources.

  In summary, the worse performance than the previous version...

  Hello

  It is not quite normal.

  Your description makes me think that there is something wrong with your vmware-tools Setup program.

  I suggest you completely remove the VMware tools, reboot and then re-install vmware tools.

  You can take a snapshot of your VM current before that (and he commit after you complete the procedure)

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• Button to navigate to another page does not not work properly all the time.

  Hello

  I'm just starting to explore the ADF, I use Jdeveloper 12.1.3.0.0 and integrated weblogic server that comes with the IDE.

  I just created a simple application with a welcome page called Main.jsf and then 2 task bounded, streams called SearchStudentsFlow and Studenloansflow, each workflow has a jsf page. The home page has a single button that sends me to the first task flow, SearchStudentsFlow and I can see is the page in that workflow, AwardsSearch.jsf. Also in the AwardsSearch.jsf page I have a button that takes back me to the home page.

  The first problem I have is that when I run the application starting at the home page button in the works of the great homepage the first time, the button send me to the AwardsSearch.jsf , but once I decide to go back to the homepage and then click on the button to go to the first task flow the button does nothing. This happens whenever I decide to return to the home page of any page in my project.

  Also, I copied the entire previous project into a new project and I decided to use the ADF security infrastructure in this new project to create a log in page create users and give them different roles and levels of access.

  I created some users who have access to all pages and all the streams, but when I run the application starts the login page and I login successfully and go to the home page, the button on the home page does not work.

  
  

  I don't know why the button sometimes works, but not of others and also I do not know why when I use the login page, the button doesn't work. I don't know if these 2 problems are related or not.

  
  

  This is my code in the homepage:

  <?xml version='1.0' encoding='UTF-8'?>
  <!DOCTYPE html>
  <f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
      <af:document title="Main.jsf" id="d1" binding="#{backingBeanScope.backing_Main.d1}">
          <af:form id="f1" binding="#{backingBeanScope.backing_Main.f1}">
              <af:panelGridLayout id="pgl1" binding="#{backingBeanScope.backing_Main.pgl1}">
                  <af:gridRow marginTop="5px" height="20%" id="gr1" binding="#{backingBeanScope.backing_Main.gr1}">
                      <af:gridCell marginStart="5px" width="34%" marginEnd="5px" id="gc1"
                                   binding="#{backingBeanScope.backing_Main.gc1}">
                          <af:image source="/images/NU_Logo_purple.jpg" shortDesc="Northwester University" id="i1"
                                    binding="#{backingBeanScope.backing_Main.i1}"
                                    inlineStyle="width:293px; height:197px;"/>
                      </af:gridCell>
                      <af:gridCell id="gc3" binding="#{backingBeanScope.backing_Main.gc3}" width="33%"/>
                      <af:gridCell id="gc4" binding="#{backingBeanScope.backing_Main.gc4}" width="33%"/>
                  </af:gridRow>
                  <af:gridRow id="gr3" binding="#{backingBeanScope.backing_Main.gr3}" height="10%">
                      <af:gridCell id="gc5" binding="#{backingBeanScope.backing_Main.gc5}"/>
                      <af:gridCell id="gc6" binding="#{backingBeanScope.backing_Main.gc6}">
                          <af:button text="Search Awards" id="b1" binding="#{backingBeanScope.backing_Main.b1}"
                                     action="goSearchAwards"/>
                      </af:gridCell>
                      <af:gridCell id="gc7" binding="#{backingBeanScope.backing_Main.gc7}"/>
                  </af:gridRow>
                  <af:gridRow marginTop="5px" height="70%" marginBottom="5px" id="gr2"
                              binding="#{backingBeanScope.backing_Main.gr2}">
                      <af:gridCell marginStart="5px" width="100%" marginEnd="5px" id="gc2"
                                   binding="#{backingBeanScope.backing_Main.gc2}"/>
                  </af:gridRow>
              </af:panelGridLayout>
          </af:form>
      </af:document>
      <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_Main-->
  </f:view>
  

  And this is my code in the adfc-config. XML

  <?xml version="1.0" encoding="windows-1252" ?>
  <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
    <view id="Main">
      <page>/Main.jsf</page>
    </view>
    <task-flow-call id="SearchStudentsFlow">
      <task-flow-reference>
        <document>/WEB-INF/SearchStudentsFlow.xml</document>
        <id>SearchStudentsFlow</id>
      </task-flow-reference>
    </task-flow-call>
    <control-flow-rule id="__3">
      <from-activity-id>Main</from-activity-id>
      <control-flow-case id="__5">
        <from-outcome>goSearchAwards</from-outcome>
        <to-activity-id>SearchStudentsFlow</to-activity-id>
      </control-flow-case>
    </control-flow-rule>
    <managed-bean id="__4">
      <managed-bean-name>backing_AwardsSearch</managed-bean-name>
      <managed-bean-class>view.backing.AwardsSearch</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1AwardsSearch.jsf-->
    </managed-bean>
    <managed-bean id="__2">
      <managed-bean-name>backing_Main</managed-bean-name>
      <managed-bean-class>view.backing.Main</managed-bean-class>
      <managed-bean-scope>backingBean</managed-bean-scope>
      <!--oracle-jdev-comment:managed-bean-jsp-link:1Main.jsf-->
    </managed-bean>
  </adfc-config>
  

  No idea why the button does not work correctly all the time?

  Thanks in advance

  Play well!

  Now, we understand the problem and can help you solve it.

  The problem is that you dropped the home page in the flow of student loan and place you thinking that you must return to the point of departure, the unlimited workflow. Actually, you don't the sheet flow loan student but simply see the homepage as part of the loan flow. The navigation rules remain those defined in the flow of student loan. Now, when you click on a button to jump to the stream of research, the target is undefined zed you simply stay on the same page, the home page.

  To make your work use case, you set a return action in the flow of student loan that return to the caller, the flow of research which, in turn, will return to his name the workflow without terminals that hold the homepage. Remove the homepage of flow of charge to students. The case of navigation allows to navigate between the button and the new return action.

  In the adf of flow research a wild-card rule that accesses the return operation sends the return flow to the home page. You must remove the sailing time pointing to research prices for the return operation because it can use the same rule of navigation of wild-card then. Then, you add a Bach student load flow navigation rule to the scholarship search page. This navigation is used for the return actionto_searchStudents.

  Timo

• Quad processor running at 100% all the time

  An old friend has processor quad with 8 GB of ram, but its computer is almost unusable because the processors operate at 100% all the time.   She has more than 20 processes running (no application running. other than the Task Manager  System Idle is not one of the processes.  I ran Malware Bytes - did not help.  A process that takes 8-23% is ' ddazpfwlqwv.exe.  I can stop it, but it is immediately and I can't find anything about it.  I went into msconfig and disabled everything I felt comfortable making; but then again, no help.  In addition, she continues to pop-up windows ' security alert - your level of security does not allow this download unfold. "  These popups (up to 5 simultaneously) even appear when a download is in progress.  I fear that she has been affected by something that is trying to take over his computer.  Looking for suggestions.

  Cleve

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

  
  

  Please run the trace when you encounter the problem

• CPU Ussage on 99% all the time

  After installing SP3 everything works too slowly. I have to wait about 3-5 minutes after startup

  word or excel te...

  In the task/process Manager shows all the time CPU ussage on 99%.

  Image - system, the name user - name SYSTEM, 99% CPU

  I tried to put an end to this process, everything has worked more quickly.

  I couldn't stop this process permanently. What should I do?

  Where is the problem?

  Thank you.

  R61, Core 2 Duo - T7250, 2 GHz, 778 MHz, 1 GB RAM, XP Pro

  Antivirus: NOD32 ESET

  Firewall: base windows

  I denied automatic back-up, as I removed all accept sofware by Lenovo with fingerprint sensor. It looks like all this work more quickly.

• After a virus infection, the App Data/Roaming/swcltb.dll is missing from my computer and the fan use 100% all the time

  Here's the problem:

  My computer was happening slowly, so I did a virus scan and it turned out that my firewall has been closed and wouldn't load up. So it took me some time to solve the problem by following these steps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-firewall-cant-change-some-of-your-settings/2679690e-c375-4232-ae45-404374386635?page=6 naernxp post, it solved the problem.
  Naernxp suggested from virus scan so I Redid the scan for malware and all then it deleted the file swcltb.dll. I thought it was the virus so I ignored it, but after restart pc my firewall has been set, but the computer showed that the swcltb.dll file is missing and CPU usage was 100% nonstop.
  Before that virus scanning, my CPU usage was normal.
  RAM: 2 GB
  Processor: Intel (R) Core (TM) 2 CPU 6420 @ 2.13 GHz

  This file is not a base file MS Win, I suspect it is a residue of the infection

• reports on the problems and solutions has stopped working message all the time

  I can't access the control panel reports of problems and solutions and constantly get one - problem reports and solutions has stopped working, message on the screen.

  How can I disable or fix this problem.

  Hi NickMeyer,

  1. have you made a recent software or hardware changes to the system?

  You can check if there is information in Event Viewer which may help us to solve the problem:

  What are the information contained in the logs of the event (Event Viewer)?

  You can also temporarily disable the security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• RV180w - CPU at 100% all the time

  The dashboard of the RV180w shows, among other things, the CPU Resorce Uitlitzation. On our device is always at 100%, that seems good value / price :-) max out.

  However, I don't know if this is indicative of a problem in the RV180. We rebooted and reflashed the RV180 with much the same results.

  The Unitlization of CPU resources is correct?

  Johannes,

  Looks like he reports the wrong CPU usage since you place a light load to this topic. I hope the next firmware will fix this.

  -Marty

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• Tecra A11 speed on the fan at 100% all the time

  Hi, one of my colleagues has a new notebook Tecra A11. I've recently updated the bios to version 2.60 and since then the fan is constantly at full speed. Before the update it would be noticeable when the laptop has been widely used, but would slow down when idle. Anyone else seen/had this problem? I wouldn't mind flashing back to the old bios but can not see available on the web site of tosh.

  Thank you

  Hello

  In your case, I recommend setting the BIOS to the default value.
  You can do it in the BIOS. Insofar as I'm sure you could get press F9 default.
  But the option is mentioned in BIOS to verify this.

  In addition, I recommend changing the CPU and cooling module in Windows Power Options.

  This should help to reduce the speed of the cooling fan.

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• Performance of the hard drive, runs at 30% all the time; slow response

  Pavilion Slimline works 30% all the time, slow at times, all the time. Run the Task Manager, identified all of the questions.

  Defragmentation, historical, navigation can be run. Registry cleaner also run.

  Still slow responses,

  Suspect still running games, must stop them, as well as other unnecessary programs.

  Any suggestions, useful, believe, this will solve the problem and improve poor performance.

  Thank you for the comprehensive answer. If the speed is the main problem now, theoretically, upgrading the hard drive would be able to increase the speed up to a point. Of course, this would impact speed of normal programs, programs on the web, etc. I also carefully read the document provided Red Rose, and although it is informative, I don't know about most in this paper has been tried.

  Regarding the age of the laptop, age obviously decreases the computer's full performance, and you have little control over this, unless you buy another computer.

  I have an idea of how research and troubleshooting have achieved you, but it is only an idea. I'll link some documents with information that you may or may not be useful:

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  http://itzkumar.WordPress.com/2010/07/03/10-ways-to-increase-hard-disk-life-and-performance/

  Let me know if you have any other questions, and I'll do my best to help you.

  Mario

• The Explorer Microsoft touch limited edition mouse lag all the time and everywhere

  Original title: mouse late

  I just bought a mouse yesterday, (explore touch limited edition). That is fine, but my problem with this one is the answer developed. from time to time when I try to move, it lags behind which is very irritating.

  It happens in games, at the office, everywhere and all the time...

  My windows 7 (64-bit) and I have already downloaded and installed the driver recommended but not luck.

  any ideas?

  Hello

  You can perform the following methods and check if it helps.

  Method 1: troubleshoot failures in the response to the mouse or wireless keyboard:

  http://support.Microsoft.com/kb/838398

  Method 2: solve a wireless mouse that does not correctly http://support.Microsoft.com/kb/321122

  I suggest you to contact the Microsoft Hardware support for assistance. http://www.Microsoft.com/hardware/en-us/support/contact-us

  How to replace Microsoft or hardware, packs software service to order and replace product manuals: http://support.Microsoft.com/kb/326246

• W7 100% CPU all the time - what can I do about it?

  Hi and thanks in advance for the help. My computer has very little memory, so I keep it really clean. Do just about everything with him, it is browse the web and stream media. Recently, it has been very slow, and Firefox (49.2) has suspended all the time. At first, I thought it was Firefox, and I followed all of their instructions to identify the high resource using plugins, etc. I deleted the history, ran CCleaner, etc.. Then I realized that even if I close FF I always see spikes frequent (approximately five seconds) to 100% CPU usage, and it often extends by 50% even if I don't do anything. I ran Avast and Malwarebytes and MSE - full scan with each of them and none of them found nothing. Is it possible that my computer resources is hacked and used by someone else?  As for mining bitcoin or something else?  How I understand this and stop it?  If it is little likely, what can I do to improve performance. It seems kind of ridiculous that open a document or a web page to "forever".  Even to write this post, I type, and then look at the screen, while the letters slowly appear...

  Not sure what is relevant for the problem, but I have 4MB of RAM, but the single 80 GB hard drive (hope I said that right), which only 29GB is free. Right now I am 1480 Cached, available from 1725 and ~ 320 is free, there are 69 total running processes. The only applications that are running are FF and two documents LibreOffice.  I checked a few days ago, and the system says that I don't have to defragment.

  I don't even know if all this has nothing to do with the peaks of the processor, so it's how little I know!

  Any help is very appreciated!

  Try running task Mgr, looking for running applications, locate the (s) using all the resources, R.click on this subject,

  Properties, see what/why use that much... In addition, 69 process is quite a bit, will try to run or cmd,.

  type: services.msc scroll through, double click on one, properties, clear the value or manual start. Manual start

  Are available on request. Also, open the event viewer, get the details of the operating system, looking for event/warning,.

  R.Click, Properties. Also streaming video uses a lot of pc resources.