Quad processor running at 100% all the time

Similar Questions

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Performance of the hard drive, runs at 30% all the time; slow response

  Pavilion Slimline works 30% all the time, slow at times, all the time. Run the Task Manager, identified all of the questions.

  Defragmentation, historical, navigation can be run. Registry cleaner also run.

  Still slow responses,

  Suspect still running games, must stop them, as well as other unnecessary programs.

  Any suggestions, useful, believe, this will solve the problem and improve poor performance.

  Thank you for the comprehensive answer. If the speed is the main problem now, theoretically, upgrading the hard drive would be able to increase the speed up to a point. Of course, this would impact speed of normal programs, programs on the web, etc. I also carefully read the document provided Red Rose, and although it is informative, I don't know about most in this paper has been tried.

  Regarding the age of the laptop, age obviously decreases the computer's full performance, and you have little control over this, unless you buy another computer.

  I have an idea of how research and troubleshooting have achieved you, but it is only an idea. I'll link some documents with information that you may or may not be useful:

  http://Windows.Microsoft.com/en-CA/Windows-8/improve-performance-optimizing-hard-drive

  http://itzkumar.WordPress.com/2010/07/03/10-ways-to-increase-hard-disk-life-and-performance/

  Let me know if you have any other questions, and I'll do my best to help you.

  Mario

• CPU fan runs at 100% of the time

  Hi all

  I have a B570E Lenov and I noticed for the last few days that the fan on the processor works all the time, I loaded and checked the CPU temperature. and it's at 45 Deg C How can that I solve this problem?

  Thanks in advance.

  Hi Quintin_cloud,

  It is the only option to remove dust aprt to open the case. If you comfortable opeinig the case, then you can consult the hardware manual and check.

  Click here to see the manual.

  I hope this helps. Post back if the problem persists!

  Best regards

  Ashwin. S

• 110 HP CPU Office works 100% all the time

  HP 110 Desktop PC AMD E1-1500 accelerated processor CPU runs at 100% at all times, win 8

  Hello grtgtrplyr,

  I understand your processor is constantly working to 100% and you are looking to fix. I'm you provide a HP support document: using Microsoft System Configuration (Windows 8), which will guide you through to disable startup items and Services in your system that may be causing the problem. I would recommend that once you have disabled any of this case the question constantly you then start reactivating the Services items and commissioning until you determine which is causing the problem. You can re-enable one at a time or in groups to refine more quickly. Once you know what Service or startup item is causing the problem, you can search a solution for it.

  If you wish to help with this is you please re-post with the Service or startup item and I'll be happy to help you. Thanks for posting on the HP Forums. Have a great day!

• After a virus infection, the App Data/Roaming/swcltb.dll is missing from my computer and the fan use 100% all the time

  Here's the problem:

  My computer was happening slowly, so I did a virus scan and it turned out that my firewall has been closed and wouldn't load up. So it took me some time to solve the problem by following these steps: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/windows-firewall-cant-change-some-of-your-settings/2679690e-c375-4232-ae45-404374386635?page=6 naernxp post, it solved the problem.
  Naernxp suggested from virus scan so I Redid the scan for malware and all then it deleted the file swcltb.dll. I thought it was the virus so I ignored it, but after restart pc my firewall has been set, but the computer showed that the swcltb.dll file is missing and CPU usage was 100% nonstop.
  Before that virus scanning, my CPU usage was normal.
  RAM: 2 GB
  Processor: Intel (R) Core (TM) 2 CPU 6420 @ 2.13 GHz

  This file is not a base file MS Win, I suspect it is a residue of the infection

• Firefox.exe 2 running in background all the time I open Firefox

  Whenever I open Firefox, there are two firefox.exe running the bottom everytime I open the browser. Whenever I try to close the other, it blocks all tabs that are on the browser, and whenever I have reload the tabs, it appears again.

  I've scanned my computer several times with several antivirus, but there was no virus found. I also disabled the plugins that I thought the question was and rested Firefox, but he was always there. I restarted my computer, no luck in doing so. Uninstall and reinstall of Firefox has not even do the trick either.

  The dual process of sky-rocket my RAM and CPU and it starts to get boring. Help, please! I appreciate any cooperation!

  This could indicate that your Firefox uses a new feature 'multiprocessing '.

  E10s

  One of the changes in Firefox 48 + title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between systems: many users find more quickly, some are slower, for many, it's neutral. It is probably a bit more memory than if everything runs in a single process firefox.exe usage.

  Are you using e10s?

  You can check if you have this feature enabled as follows. Either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table on the page, find the line "Multiprocess Windows" and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  If you think that Firefox is not performing or now uses an unreasonable amount of resources, you can assess whether e10s is causing this problem by turning it off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by browser.tabs.remote.autostart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Remains of problem: computer battery laptop battery 100% all the time (not connected), the LED flashing light?

  My laptop is HP Probook s 4430 (product number: QJ670AV). I just bought it for 4 months. Last night when I finished my work and I stopped him then I plugged the adapter to recharge. This morning I woke up and found that next to the Jack to the battery charge flashes constantly (in red). Normally, it turns red when it is plugged and becomes white when the battery is going to be full and stop when not plugged in. Now I use my laptop (without charging) for 2 hours and the battery icon on the screen said: "100%". What is the problem? I'm so worried. Please help me. Thanks to you all!

  Hello Lavender148,

  Your laptop is not unload.

  Do a hard reset.
  
  Turn off the computer.
  
  Remove the power cable and battery.
  
  Hold down the power button for 15 sec while booth energy sources are deleted.
  
  
  
  This should reset the hardware in the computer.

  That you put it on press the F10 key. This will load the BIOS setup utility.
  
  Press F9 to load the default values.
  
  Press F10 to save and exit.
  
  
  
  When the computer starts up, check if everything is working.

  I would like to know how everything goes.

  Nice day.

• Since the update to 3.1 (Windows XP virtual) CPU resources at 100% all the time

  I had the latest version works perfectly, and since I have updated to version 3.1 my Windows XP SP3 is too slow with 100% of CPU resources during the first 3-5 minutes. After this time, there is a 'system' of the process of the SYSTEM user that starts in almost 40% of resources.

  In summary, the worse performance than the previous version...

  Hello

  It is not quite normal.

  Your description makes me think that there is something wrong with your vmware-tools Setup program.

  I suggest you completely remove the VMware tools, reboot and then re-install vmware tools.

  You can take a snapshot of your VM current before that (and he commit after you complete the procedure)

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• RV180w - CPU at 100% all the time

  The dashboard of the RV180w shows, among other things, the CPU Resorce Uitlitzation. On our device is always at 100%, that seems good value / price :-) max out.

  However, I don't know if this is indicative of a problem in the RV180. We rebooted and reflashed the RV180 with much the same results.

  The Unitlization of CPU resources is correct?

  Johannes,

  Looks like he reports the wrong CPU usage since you place a light load to this topic. I hope the next firmware will fix this.

  -Marty

• Tecra A11 speed on the fan at 100% all the time

  Hi, one of my colleagues has a new notebook Tecra A11. I've recently updated the bios to version 2.60 and since then the fan is constantly at full speed. Before the update it would be noticeable when the laptop has been widely used, but would slow down when idle. Anyone else seen/had this problem? I wouldn't mind flashing back to the old bios but can not see available on the web site of tosh.

  Thank you

  Hello

  In your case, I recommend setting the BIOS to the default value.
  You can do it in the BIOS. Insofar as I'm sure you could get press F9 default.
  But the option is mentioned in BIOS to verify this.

  In addition, I recommend changing the CPU and cooling module in Windows Power Options.

  This should help to reduce the speed of the cooling fan.

• Why Lightroom keeps using 30% of CPU power all the time?

  Hi all

  I'm relatively new to LIghtRoom.

  I started working on a new series of photos (400 app.). I opened it to the new directory.

  Since then, all the time I'm working on theses images Lightroom guard using about 30% of the time processor.

  More all the time, I spent on these photos is estimated at over 30 hours, then (Yes, I'm slow and open each one in Photoshop while Lightroom is still open). So I guess that Lightroom has completed all rendering, they wish to do.

  My question is why and what she maintains the calculation and is there a way to stop it?

  The system configuration:

  Single core Intel Pentium 4 CPU, 3.6 GHz (Hyper Threading allowed)

  2 GB OF RAM

  Graphics based NVidia 6600 (256 MB)

  2.3 LightRoom and PhotoShop CS4 are open

  Please help - the system is slow anyway. He can really use these additional CPU power.

  Utzly

  Check your preferences and make sure that the option to write metadata are automatically disabled.

  With your set to the top, I would not go PS and LR simultaneously for a long time.

  Select all the photos and made them LR average Previews might help a bit. Make sure that the task is completed before doing anything else.

• Upgrade to Win 8.1 the fan runs all the time and Raw (Silkypix) converter consume 100% CPU resources

  Hi, after upgrading to win 8 to 8.1 win my converter (Silkypix) raw program running extremely slow and consuming 100% of CPU. VAIO all updates completed, all Win 8.1 updates made. ATM Radeon HD 7500 M / 7600M (Maj) with 2 GB RAM dedicated.

  In addition, the fan works almost all the time that was not the case with Win 8.

  Vaio SVE1712Z1EB with 8 GB of RAM, i7 processor execution.

  SeanQ, after some time looking for a solution I finally found it on one of the vaio sites forum: it is the Radeon driver that must be installed from the Vaio support site. NOT the driver the latest AMD site. It does not solve the problem.

  I did as follows: device, graphics card, Uninstall Manager. Did not help. Went to AMD in Program files. Setup.exe has begun, but instead of installation, clicked on uninstall. In this way, I uninstalled the driver former AMD and bad news from the site of AMD. I had to manually uninstall the driver in Device Manager, several times. Finally, I went to the site of Vaio and tried updating the driver. He failed. Reset. Manually start the update of the Vaio AMD driver. Finally it worked.

  The fan is now more or less normal speed.

  Overall, I spent 15 hours looking for this solution. How much is my time worth? Just joking, I'm happy that I found the solution.

• Satellite Pro 4600: Win2k with SP4 - cooler run all the time

  Hello

  last week, I bought a used Toshiba Satellite Pro 4600 PIII, 1 GHz, 512 GB of Ram, WIFI and DVD burner. Great machine so far.

  After that I changed the FAT32 file system to NTFS and reinstalled Win2K/SP4 cooler runs all the time.

  TaskManager says that "THOT_KEY.exe" uses up 99% of the CPU power. Disabling this service reduces the power of the processor and the cooler was quite, BUT didn't really helped - lots of keys does not work.

  I ran a few utilities to disinfect as Kaspersky, NOD32 etc. to ensure that Ia´ve not taken some malware.
  Should I try a bios update or change some settings?

  Any ideas?

  Thanks for help

  Hello

  AFAIK the THOT_KEY.exe belongs to the Toshiba Hotkey utility that controls the various key functions.
  If you disable this service, you will not be able to use the FN keys more.
  I m not 100% sure why this service uses 99% of CPU performance, but perhaps that it s not completely compatible with the W2K service packs. Where did you download this utility? I found it on the page of Toshiba Europe!

  In my opinion, you should try to reinstall the system again. This is probably the key!

  Good luck

• W7 100% CPU all the time - what can I do about it?

  Hi and thanks in advance for the help. My computer has very little memory, so I keep it really clean. Do just about everything with him, it is browse the web and stream media. Recently, it has been very slow, and Firefox (49.2) has suspended all the time. At first, I thought it was Firefox, and I followed all of their instructions to identify the high resource using plugins, etc. I deleted the history, ran CCleaner, etc.. Then I realized that even if I close FF I always see spikes frequent (approximately five seconds) to 100% CPU usage, and it often extends by 50% even if I don't do anything. I ran Avast and Malwarebytes and MSE - full scan with each of them and none of them found nothing. Is it possible that my computer resources is hacked and used by someone else?  As for mining bitcoin or something else?  How I understand this and stop it?  If it is little likely, what can I do to improve performance. It seems kind of ridiculous that open a document or a web page to "forever".  Even to write this post, I type, and then look at the screen, while the letters slowly appear...

  Not sure what is relevant for the problem, but I have 4MB of RAM, but the single 80 GB hard drive (hope I said that right), which only 29GB is free. Right now I am 1480 Cached, available from 1725 and ~ 320 is free, there are 69 total running processes. The only applications that are running are FF and two documents LibreOffice.  I checked a few days ago, and the system says that I don't have to defragment.

  I don't even know if all this has nothing to do with the peaks of the processor, so it's how little I know!

  Any help is very appreciated!

  Try running task Mgr, looking for running applications, locate the (s) using all the resources, R.click on this subject,

  Properties, see what/why use that much... In addition, 69 process is quite a bit, will try to run or cmd,.

  type: services.msc scroll through, double click on one, properties, clear the value or manual start. Manual start

  Are available on request. Also, open the event viewer, get the details of the operating system, looking for event/warning,.

  R.Click, Properties. Also streaming video uses a lot of pc resources.