RVL200 and Windows 2000 Server - can not access network resources via VPN

Similar Questions

• Can not access network drives after installation of Windows 8 Pro

  Hi all

  I have a concern with a PC in Windows 8.

  I am rebuilding a new laptop for a user. Successfully, I added to the domain and assigned privileges for the user. When I try to log on to the PC with the new user account, I can not access network drives. When I log in with my account, I am able to access the network without problem drives.

  When I'm on the user account I can see the other computers on the network as well. But for some reason I can't access network drives. Other computers on the domain are running Windows 7 Professional.Can someone help me with this?

  Thank you

  Hello

  As you are on a domain, I suggest you to post your query in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads

  I hope this helps.

• Error: 303: unable to load a resource: can not access the resource file (try loosening Flash security)

  Error: 303: unable to load a resource: can not access the resource file (try loosening the Flash security settings): error #204 in shockshare.com and putlocker.com any help please?

  When I was watching a movie... There was a link, I always watched movie shockashre and putlocker.com but today, I saw this problem and don't kno how to solve

• Safe mode, so I can not access the Services via a Normal startup.

  Services, including Security Center, Windows Update, SuperFetch needs to be restarted but Vista freezes outside Mode safe, so I can't access the Services via a Normal startup.
  CHKDSK shows the hard drive has no bad points and the system works fine in Safe Mode.
  No idea how to deal to freeze shortly after startup? Even McAfee should be started. No idea what order to these programs.
  I've already eliminated at least 10 programs that were part of the start-up, after executing six miracle of Microsoft Diagnostics.

  * original title - problem of catch-22 with Vista freezes *.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Try to put your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows XP:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Hope this information is useful.

• Try to upgrade to the new version of Java and get error 1606: could not access network location %APPDATA%\protector.exe

  I tried the upgrade to the new version of JAVA kept b/c getting reminders... uninstall the older versions (2)... réessayées... got the following error code: "Error 1606.  Could not access network location % APPDATA%\ ».  I tried of looking for help on the Java site. and I tried a few suggestions listed... no luck!  CAN SOMEONE PLEASE?

  Thank you!

  gasweetpeach54

  The usual reason for this error message, it's that some of the registry entries mentioned in the following items are damaged.

  http://support.Microsoft.com/kb/886549

  http://support.Microsoft.com/kb/2258121

  If you are unable to fix it by using these methods, try to create a new user account, give administrator privileges and use it to install Java.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• An automatic update that happened Saturday, Jan.23 for my Windows Vista Home Edition and since then I can not access

  My computer automatically did an update of Sam and immediately after it rebooted I received the message "the service user profile Service failed the log on.»  User profile cannot be loaded.  I am now in safe mode to try to figure out what to do if I can use my computer.  Yet once, not didn't have a problem until the automatic update that Microsoft sent to my computer.  I have not a clue what should be my descriptive Tag... HELP, please.

  When I start my computer, it seems that it is fine... reboot brings the icon with my name "mkathleenthomson", but then I get the message I typed over top, the user profile Service
  service does not have the log on
  User profile cannot be loaded

  Hello thomsonetc,

  Thank you for taking the time to post.

  You say the problem has occurred after an automatic update, have you tried the system restore?

  What is system restore?

  It is not clear on what you have tried so far the problem so forgive me if you already tried below.

  Difficulty of a corrupted user profile

  And then take a look at this Microsoft Article if you still experience the problem.

  "The user profile Service has no logon. Unable to load the user profile.

  Please take a look at the thread below for more information by MVP Malkeleah
  

  The user profile Service has no logon

  Please let us know.

  Thank you

  Keith
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Downloaded and installed later AEM MSO 32-bit security.  Using WINDOWS 7 Prof 64 bit SP1, MSO Pro 2010 32 bits.  All MSO programs crash and diasble addon.  Can not access secure files.

  That is what it is?

  Hi Adam

  CC desktop application has replaced Manager extensions these days, unless you are a user of CS6, you shouldn't have to use the extensions manager more.

• Windows XP sp3 can not access the network shares on vista after installing sp2

  I have a xp sp3 computer and another currently running vista Home premium sp2. Previously, I was able to access the network share on the xp computer before vista computer I installed sp1. Both computers were able to ping between them without problem.

  I've upgraded to sp2 because I had problems with windows media center, missing records. Upgrade of these issues fixed, but this means that roll back to sp1 is not an option for me to get operational network.

  Please do not post a standard answer on the network configuration. I am familiar with the standards requirements to share files between xp and vista and everything is set up correctly.  Like I said everything was working fine before the installation of sp2.

  If it is a known problem that is still not resolved, I'd appreciate knowing that information as well.

  Edit: Firewall been disabled during my troubleshooting

  After more work, I was able to solve my problem.  Update zone alarm solved my problem and helped my windows xp machine to access my Vista network shares.  As I pointed out in the original post, zone alarm firewall has been disabled during my troubleshooting.  Apparently, when disabled, the old version of zone alarm has always been the origin of the problem.

• Old XP hard drive installed in my new Windows 7 computer, can not access my pictures because of the authorization.

  My old XP, I put my images specifically to not allow other users to see my photos. The hard drive crashed and that hard drive is now in a new Windows 7 computer. I went through the steps of the ownership of the file and the 'My pictures' folder and it is still not allowing me to open all images. Help, please.

  Hi Armen has,

  ·         What is the full error message?

  Follow the steps in the article.

  How to open a file if I get an access denied message?

  What to know before applying permissions to a file or folder

• Cannot access network resources - Cisco VPN client

  Please see attached the network topology.

  I can connect using the Cisco VPN client and access to all resources of the 192.168.3.0 network

  I can't ping / access to all hosts on the network 192.168.5.0.

  Any ideas?

  Thanks for the help in advance

  AD

  Quite correct.

  Please add has the access list:

  CPA list standard access allowed 192.168.5.0 255.255.255.0

• Files on the external drive have changed to shortcuts, can not access.

  I click on an element and it says the following to "the item this shortcut referred to in jaemaat.scr has been changed or moved. "so this shortcut will no longer work correctly you want to remove?" but the record still shows the same amount of spaced used as before that the question (32.8 GB used from 265 GB). I clicked to display hidden files as shown here, but has not seen a virus when I click on new folder. I scanned with Norton and it found 2 problems and fixed but I can not access anything whatsoever. How can I recover my files? Also does it matter if I'm not on the same computer I have initially oploaded files from, he gave me a little old and slow.

  I try on a windows vista computer, my old one was a version of windows 2004

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/files-on-external-drive-have-changed-to-shortcuts/695db4cc-645f-4BD1-85c7-41671457fe11

  It will be useful.

• I'm trying to access my work PC to remote my PC at home. The box says Windows 2000 Server and I do not know where to find my user name or password

  Original title: Windows 2000 server

  Search results for "I try to access my work PC to remote my PC at home. I need to get through my credentials and don't know where to find the information. The box says Windows 2000 Server and I do not know where to find my user name or password. The one I use to log into my work PC or PC at home do not work. »

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• VCB with Windows 2000 Server before and after! Does not!

  In our configuration (esx3.5, vi2.5 and vcb 1.5) we have problems get the pre post scripts running in Windows 2000 Server. It does not at all pre/start scripts. We need this because we have some strange databases that must be stopped before the snapshot and started after.

  The 2000 machine is fully updated, and the esx servers are updated 4.

  I also tried in a test environment with esx3i fully updated (beyond update 4) and vcb1.1

  Pre-Post controls work perfectly in 2003 (not yet tested in 2008).

  What I tried:

  • Disable-ing the SyncDriver (must be a solution for Server 2000 with Exchange 2000)

  • Place scripts to a location different (C:\WINNT or C:\Windows or C:\Program VMware Tools\backupScripts.d

  • Adding C:\Program VMware Tools\backupScripts.d to the $PATH variable so that the script can be run from anywhere

  • Reinstall the VMWare tools.

  The command I used to get the backup:

  v h vcbMounter.exe *. n u .local \n*-ipaddr:vcbtest. .local - r c:\vcb\vcbtest-full-01 t m nbd fullvm

  I also tried adding the switch "0 q" or "q 1".

  No solutions seem to work. Does anyone have any ideas?

  Greetinx Atze

  It works for me with a C:\Windows folder (even if windows is installed in C:\winnt),

  with files like pre-antigel - script.bat and post-thaw - script.bat

• can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing path network not found

  can not access shared folders & printers in windows 2003 server client XP pro sp3 systems error showing network not found path.

  After restarting pc for awhile, we can access shared folder & printer but after 30 minutes (more or less) again cannot access. In the printer folder connected printer displays status as long as it is impossible to connect to the win-2003 server. Please help me out of this problem because I support banking sector.

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/