RX100 ii sweep panorama of problems

Similar Questions

• NEX 5N sweep panorama does not

  I have a brand new 5N (10 October 2012) NEX of Adorama with 18-55 mm lens.
  I used only the focal length of 18mm for sweep pano. I tried more than 100 panoramas of sweeping and only 3 came out. 3 / 100 attempts.

  I am a very experienced photographer. The error message is the same every time... "Moving camera too fast."

  I slowed way tried to hold the camera in different ways, gently, on many different outside and inside the scenes and on the tripod.

  Is there something wrong with this mode in this particular 5N.

  It will just work.

  Someone had the same problem? Am I missing something? Firmware fix this problem?

  I got this camera at a price of the rash and it's sold out everywhere, so I doubt I can get another if I return it.

  Any input is greatly appreciated.

  Thank you for your post and welcome to the forums.

  I understand that with Panorama Sweep, you will need to move the camera slowly in the direction that the arrow is oriented. In fact I was experimenting with the device and I have to move slowly in the direction of that the arrow was pointing, I would say that anywhere from 45 to 60 degrees where I was. It took at least 4-5 seconds for the panoramic image to be accepted OK. I was also using the 18-55 lens. By the engineers, Practice makes Perfect so there may be some adjustments to make when you use Sweep Panorama. However, if you have time try to put the camera to an electronics store that sells the camera or one nearby NEX models and compare the Sweep Panorama with your camera. You may be able to determine if your device is defective. If you need to support more do not hesitate to contact the Sony Support by clicking on the following link:

  http://eSupport.Sony.com/us/p/support-c... EX5N & LOC = 3

• SignalExpress-Sweep type configuration problems

  Hello

  I am creating an analog signal with a sweep to make the change in the frequency of my signal.

  I chose "Sine wave" as a type of signal.

  Then, configuration of the scan, I have a problem.

  Indeed, the type of configuration, I have chosen is "exponential" (so that the frequency varies from exponentialy). But the graph on the right side of the window as if I had chosen linear.

  When I'm runing the VI, does the frequency varies from exponentialy but the graph remains as if it were varying linearly.

  Is this a bug?

  Is anyway to remedy?

  Thank you very much for your answers.

  Hello

  This is the normal behavior.

  If you take a look whenever you change between exponential and linear from the point to the graphic evolution. For example, if 1 k to the exponential value, the value of iteration is 400, Linear 1 k the value of iteration is completely different. In fact, this graph does not show you values like a curve, because when you assign exponential the y-axis becomes exponential, so the graphic scale variations becomes exponential but not the curve.

  Please let me know if you have any doubt.

  Thank you.

  Best regards.

• Record scanning to the desktop using mac OS 10.9

  I just want to thank the HP employee who provided instructions on how save the scan on the desktop without getting a gray image or black all.

  Using Preview to sweep around the problem of loss of image when registering.

• What is the difference between the NEX-5 and NEX 5R

  I would like to know what is the difference between 5R NEX5 and NEX to help me choose the best.

  Thank you

  Here are some key differences between the NEX-5 and NEX - 5R.

  NEX-5

  • Sensor CMOS APS - C with a resolution of 14.2 million pixels
  
  
  • video recording Full HD 1080/60i
  
  
  • the speed of 7 frames per second in burst mode
  
  
  • ISO sensitivity up to 12800
  
  
  • Sweep Panorama and 3D Sweep Panorama modes
  
  
  • Autofocus contrast with 25 points

  NEX5-R

  • Sensor CMOS APS - C with a 16.1 megapixel resolution
  
  
  • video recording Full HD 1080/60 p
  
  
  • the speed of 10 frames per second in burst mode
  
  
  • ISO sensitivity of up to 25600
  
  
  • Panoramic scan mode
  
  
  • Quick autofocus hybrid with contrast of 25 points of 99 points phase detection autofocus and auto focus

  In addition, the NEX5R has built-in Wi - Fi that allows you to install applications and extend the functionality of the camera. Built-in Wi - Fi will also allow you to transfer images wireless to a smartphone, Tablet, the computer and the TV.

  If this post answered your question, please mark "accept as a Solution.

• Long exposure noise reduction can be stopped ICLE5000L

  So as above. It may be "truned".

  I'm taking my own dark images and using a PC to hide them.

  Having to wait an HOUR for the camera to take another hit after a 30 min exposure is just irritating down!

  It says on the technical specifications, it is available. Is not mandatory.

  This Sony support page says "noise reduction long exposure is not performed with the following functions."

  • Adv. continues
  • More about shutter priority.
  • Support: Cont.
  • Smart auto
  • Night to hand shot in scene selection
  • Anti-Motion Blur
  • Sweep Panorama

  I have not tried but in the hope that the above will work for you.

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• Picture shakes for pan?

  I m working in an animation with pictures steels long multy layers spaced in the z axis to achieve a realistic pan.

  I ve is a 3D camera but in the exported video, I experienced tremors that the movement is not continuous.
  1920 X 1080
  30 images/s

  progressive

  This can be caused by critical panoramic speed problems or by your cache. This is why there are critical movement speeds that do not work with the video from the Adobe AE FAQ list Forum: FAQ: why a horizontal movement of stutter (jerks) in my films, as in the pans?

• Hello, I just bought a 58 I want to know how to activate the face detection and in what mode I can use

  Hello, I just bought a 58 I want to know how to activate face detection and in what mode I can also use how to click pictures in mono

  Press the Fn key, select (smile/face detect.), then select the desired setting. When the exhibition is set to [Sweep Panorama] or [tele-zoom suite priority AE], [face detection] cannot be used.

  If my post answered your question, please mark it as "accept as a Solution.

• HX200 or HX300

  HX200 or the HX300 is one better than the other? I was told that the hx300 is not very good at full zoom. I'll buy one of these two. I own a DSC - H5 camera now and want a longer lens. Thank you

  Here's a quick rundown of the specifications of the cameras you're looking at.

  DSC-HX200V on DSCHX300

  • smaller in size and weight
  • GPS function
  • 3D sweep panorama
  • optical zoom 30 x

  DSCHX300 on DSCHX200V

  • largest number of megapixels (20.4 vs 18.2 MP)
  • wide ISO range
  • multi-port USB (compatible with accessories, e.g. RM-VPR1 remote control)
  • scanning 360 degrees panorama
  • 50 x optical zoom

  In terms of zoom capacity, the DSCHX300 has an advantage over the DSCHX200V. It has a greater angle of view and zoom more. The only time you will notice a decrease in the quality of the image is if you go beyond the scope of the optical zoom. You see the image 30 x in the DSCHX200V and more than 50 x in the DSCHX300, the camera will use the digital zoom and image quality starts declining.

  If this post answered your question, please mark "accept as a Solution.

• Z2 Vibe Pro - Panorama problem

  If I want to take the panorama photo, it gives me the opportunity to vertically at first, but I can't change it to a horizontal panorama, which seems absurd, so I'm surelly missing something, can you advice?

  Another problem with the camera is, how can I change the size of images, for example if I want to record images with a high resolution or low resolution? The phone seems to only give the options of 4:3 or 16:9 format, but does not allow to change the resolution of the photo? He finally seems to be no mode 1:1 to the front facing camera, which is kind of weird because it is something that is not difficult to program or whatever it is, still, if you want to do a profile picture of 1:1 with front facing camera, the phone does not. Samsung allows.

• Problem with creation of panorama

  I tried to make a panorama.  I followed the steps described in a book on using 14 items. The program would not create the panorama claiming one of the images was not the right size? In any case, I've cropped all the three images at 5 "by 5", so I don't know what the problem is with elements! Irritating! The book says if elements cannot create the panorama I had to create a blank canvas and remove the pictures in manually first. Will someone tell me how to proceed? How to create a Web and get images inside. The book does not say.

  Open your three images in Expert mode, and then click the top menu:

  File > new > Blank File

  Set the dimensions and resolution, and then click OK

  Drag the first image of the photo and drip tray and use the move tool to position. Repeat for the other two, overlapping where it is necessary to join.

  Harvest in the end.

• problem with panorama

  Hello

  I use LR 6.2.1 on OS X El Capitan, and I am facing a problem that I have not had before with LR6:

  When you try to create a panorama, the preview as well as the created image is black. This means, for a reason that my lightroom is not make panoramas more.

  It looks like ANOTHER but 6.2 + version.  See here Overview of Panorama and HDR blackened?

• I have installed photoshop and lightroom.  1. I'm trying making panoramas, and it won't work.  I think the problem is that I don't have enough ram to do multi photo software?  How much ram by image? 2. What can I put programs on the new computer?

  Can I get help on this forum?

  Try to make the panorama by simply using Photoshop, so LR does not also from memory.   The general process is to save settings in XMP files, select images in Bridge, then tell bridge to call PS make the panorama.

  Step 1.  Save Metaata files in LR: make changes in LR.  In the LR library grid, select the images for the panorama.  Then, right-click of metadata / save metadata files (make sure that it is said that files don't file not).

  Step 2.  Close LR.

  Step 3.  Open the bridge and go to the folder with the images for the panorama.  Select the same images in Bridge.  Choose tools / Photoshop / Photomerge in Bridge with these selected images.

  Continue with the normal process of Photomerge in PS.

  You can also blow up bridge and begin step 3 of the PS, using the file / automate / Photomerge, but in my experience of Bridge take not much more memory, at least compared to Lightroom.

  ---

  If things still do not work no matter how effective you try to minimize taking programs from memory, you may need to work around the problem of exporting more small 16-bit targets your raw files, then use Bridge/PS to merge those which will I hope less memory.  There is no good way to predict how much memory is needed by the image, although you might experiment with small sizes of images to see how much memory they take and consider the maximum size to try.  Don't forget that you can also control the amount of memory PS tries to attribute to himself in PS / preferences / Performance.

• Problems with panoramic flash files to the Director

  I have some problems trying to flash panoramic photo Director files.

  I get this software Pano2VR create 360 and journal photos in flash format. So finally, I have the SWF... but when I try to put this file in Director, works.

  Check the file flash here

  http://costaricaspirit360.com/

  any help

  Concerning

  Ginod

  Works for me in Director 11.0.3.466 on Windows XP Pro SP3, but you did not provide all the information, so it is difficult to know why it wouldn't work for you.

  You don't make it easy to download the SWF (like, place it in a zip archive) and you explain that "[t] works" - If you want others to help you, you should be much more useful.