problem with panorama

Similar Questions

• Problems with panoramic flash files to the Director

  I have some problems trying to flash panoramic photo Director files.

  I get this software Pano2VR create 360 and journal photos in flash format. So finally, I have the SWF... but when I try to put this file in Director, works.

  Check the file flash here

  http://costaricaspirit360.com/

  any help

  Concerning

  Ginod

  Works for me in Director 11.0.3.466 on Windows XP Pro SP3, but you did not provide all the information, so it is difficult to know why it wouldn't work for you.

  You don't make it easy to download the SWF (like, place it in a zip archive) and you explain that "[t] works" - If you want others to help you, you should be much more useful.

• problem with the orientation of the photo (angle) to be imported into lightroom (4 / 5)

  Hello

  I have a problem with importing the photos a few months. Lightroom import photos with a tilt, randomly. You can see a few examples below. I can't fix with the tool from lightroom without lost of my picture.

  I use a pc running windows 7. I try different versions of Lightroom (4 and 5). I delete the photos and I re - import. In fact, I have the 5.7.1 version of lightroom. When I use another app to view photos (picasa or other), there is no problem. This problem will appear approximately in November 2014. I guess (I'm not sure) after changing the lightroom version (5.5-> 5.6). I have always used the same camera, a sony rx100.

  It's really a problem for my panorama!

  If someone has an idea, it will be great!

  Thank you for reading this message. I apologize for my bad English

  Fred

  

  It is unlikely that either recorded in a processing defect, or included in a "Preset" called import, or otherwise, you have "Vertical" lit.

  It is in the Panel of correction lenses - Basic tab. It is analyzing the contents of each picture and evaluate what he thinks may be a horizon of a coherent perspective / vertical / flatness (there are a few options for how it then corrects the image in response to this).

  To check which of the above two possibilities is the case: you can make a virtual copy of an image and then reset it. If the image shows still turned in this same way, then standing is active in the default treatment that apply to this particular image. If standing had been arrested in these default values, then Reset would have stopped it for this photo. Uncheck standing and then re-save the default processing.

  If when reset, the image of straightening / rotation does NOT - then it's probably a develop preset that you use when importing, or subsequently. When you manually apply this setting, the image goes as shown: you have confirmed this preset to be "at fault". Update of this preset, unchecking standing. When used on the new images below, this vertical analysis and correction will not be made.

  Vertical is IMO something you are likely to want to frame-by-frame, if necessary - and do not occur in all areas. But the lens profile and correction of CA CAN apply by default, without bad effects, in my experience.

• Problem with vacuum created during a photomerge of 8 jpg images

  Hello

  I have a problem with a panoramic picture created using photomerge and 8 photos (with photoshop cc)

  The result was very good with the exception of a segment not very much aligned.

  I managed to put in place a few pixels and the picture is almost 'perfect', unless I have a sewing little empty space that I can not complete by any tools such as stamping, brushing, patch, or even paint.

  Now, I have a suspicion of snicking the problem lies in the layers, but I can't understand to create duplicated layers, and where possible.

  (I should try to merge the psd pcictures instead of jpg?

  Any ideas would be very welcome.

  Thank you

  Serge

  
  

  After you create the photomerge you have 8 layers.

  If you merge the layers into a new layer at the top of the layer stack by pressing Ctrl + Alt Shift + E (Cmd + Option + Shift + E), does make a difference?

• Problem with photomerge feature landscape pse9

  Hello

  I have a PC with Windows 7 Pro.  I've had Photoshop Elements 9 installed for a while now but find that I can't use the landscape photomerge feature.  When I click on file, new, the option landscape of photomerge is grayed out.  I've used this feature in the past and don't know why this should happen.  Any suggestions will be much appreciated.

  Thank you

  Are you facing a problem with photomerge panorama. If Yes please do confirm that if you work in 'Guidé Edit Mode' or 'Full Edit Mode '. If you work in 'Guidé Edit Mode' then Panorama feature will not be enabled. It will be activated in "change complete.

  You can check the mode by looking at the upper right Phoshop elements Editor. and select "Edit full."

  Thank you

  Yannick Thomas

• Problems with Lightroom 3.6 update

  After update to install 3.6 LR, LR will recognize is no longer Photoshop CS5 64-bit as an external editor. After adding it again manually, it still doesn't let me use various features of Photoshop plugin. No "merge to a panorama' or 'merge to HDR' or 'open as smart object' or 'open as layer '. I was able to add manually the Photoshop C5 return as long as editor-in-Chief, but the options are still grayed out and pictures will not be re - import in Lightroon after editing. I am running Windows 7 64 bit. Absolutely no problem before installing 3.6 LR.  Any suggestions? I do not want to reinstall Photoshop CS5 and I can't uninstall LR 3.6 will fix the problem...

  Anyonwe else has this problem?

  I had the same problem with my desktop i7 Win 7 CS5 manually added but things just weren't right then reinstalled Photoshop CS5 and now everything is fine. Problem list that I had with an update of Lightroom came to 2.4. A side note ran that same update on my Win 7 i5 laptop no matter what so ever.

• Problems with divs vertical spacing

  Hi all

  I have problems with CSS and vertically stacked my divs, in the following code, there are a number of div tags identical and I want that they stack, one above the other as in a list. At the moment I need to hit return after each div down below than above and it puts too little room between each div doing this. I am at a loss how to fix the amount of the spcae between them and also to make only once directly below the other.

  Any help is greatly appreciated

  Thanks Rick

  <bodystyle="margin:0; padding:0;">
  <div class="logo">
    <p><img src="images/spinlogonewsml.jpg" alt="Spin City Logo" border="0" style="position: absolute; top: 10px; left: 500px; /></p>
    <p> </p>
    <p> </p>
  </div>
  
  <div class=main">
    
  <div class="imagebutton" id="left"><img src="images/img_16_n.png" width="40" height="40" alt="left button" /></div>
  <div class="help">Rotate the Object or Panorama left one increment.</div>
  <p> </p>
  
  <div class="imagebutton" id="right"><img src="images/img_17_n.png" width="40" height="40" alt="Right Button" /></div>
  <div class="help">Rotate the Object or Panorama right one increment.</div>
  <p> </p>
  
  <div class="imagebutton" id="Plus"><img src="images/img_18_n.png" width="40" height="40" alt="Plus Button" /></div>
  <div class="help">Zoom into the image a step at a time.</div>
  <p> </p>
  
  <div class="imagebutton" id="minus"><img src="images/img_19_n.png" width="40" height="40" alt="Minus Button" /></div>
  <div class="help">Zoom out of the image a step at a time.</div>
  <p> </p>
  
  <div class="imagebutton" id="AutoRotate"><img src="images/img_20_n.png" width="40" height="40" alt="Auto Rotate Button" /></div>
  <div class="help">Starts or stops auto rotation of the Object or Panorama.</div>
  <p> </p>
  
  <div class="imagebutton" id="DefaultView"><img src="images/img_23_n.png" width="40" height="40" alt="Default Vew Button" /></div>
  <div class="help">Resets the Object or Panorama to it's starting position.</div>
  <p> </p>
  
  <div class="imagebutton" id="RotateMode"><img src="images/img_25_n.png" width="40" height="40" alt="RotateMode" /></div>
  <div class="help">
    Sets the mouse interactive mode to 'Rotate' allows for rotating the Object when zoomed in, toggles with 'Move' button below.
  </div>
  <p> </p>
  
  <div class="imagebutton" id="MoveMode"><img src="images/img_24_n.png" width="40" height="40" alt="Move Mode Button" /></div>
  <div class="help">Sets the mouse interactive mode to 'Move' allows for dragging the Object when zoomed in, toggles with 'Rotate' button above.</div>
  <p> </p>
  
  <div class="imagebutton" id="SoundButton"><img src="images/img_28_n.png" width="40" height="40" alt="Sound Button" /></div>
  <div class="help">Use this button to mute the sounds played by the interactive presentation.</div>
  <p>  </p>
  </div>
  </body>
  </html>
  

  Hi, I appreciate the help, but I don't mean to get rid of the formatting that the divs allows me.

  You can put any selector just as you wish.  IMO, a division of gazillion tags is not an effective coding practice and should be avoided.

  I don't understand why I need two paragraphs after each div text to get the div to the one above it.

  Review CSS margins and padding.

  http://w3schools.com/CSS/css_margin.asp

  http://w3schools.com/CSS/css_padding.asp

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.