S HP QuickWeb ProBook 4530 on Setup
Hi all
I want to configure my HP QuickWeb ProBook, but I find everything 'Instant-On' or QuickWeb options on my system Bios Setup.
I have my bios to the latest version in v2.1.
I have a "Fast Boot" option, but it is disabled, with the message "seting Divelock password or enroll users... desactave Fast Boot.
Wat can I do to configure my QuickWeb.
Thank you
"but I find"Instant-On"or QuickWeb options on my system Bios Setup.
I guess I misunderstood your statement
Your manual says there is a Quickweb button
Home page for your model
.
Button n ° 2 or Quickweb Button
.
Tags: Notebooks
Similar Questions
-
HP ProBook 4530 s Quickweb does not
HP ProBook 4530 s
Windows 7 Edition Home Premium 64-bit
The BIOS 501 error
I have Installled Windows 7 on drive C: (NTFS)
then installed QuickWeb.
Tried to use QuickWeb gives error BIOS 501
then installed on drive (FAT32) tools Hp QuickWeb
Once again same error Bios 501
Can't understand the problem can someone help me...
Thank you very much in advance.
Welcome to the HP Forum!
dbk3110 wrote:
HP ProBook 4530 s
Windows 7 Edition Home Premium 64-bit
The BIOS 501 error
I have Installled Windows 7 on drive C: (NTFS)
then installed QuickWeb.
Tried to use QuickWeb gives error BIOS 501
then installed on drive (FAT32) tools Hp QuickWeb
Once again same error Bios 501
Can't understand the problem can someone help me...
Thank you very much in advance.
You said that you have installed Windows 7 in the C: partition
Was that a factory image install via the Recovery Manager, or was it a facility own fom a Microsoft dvd installation?
The error you are getting means that the UEFI system partition problems. Can still call you the Diagnostic tools to the power upward with the F2 key? If this isn't the case, you must reinstall UEFI. Follow the installation instructions.
The software is available here at the web support portal users for your ProBook s 4530..
Kind regards
ERICO -
Hello!
I have a s ProBook 4530 laptop.
After you install 64-bit Pro 10 Windows I have an unknown device:
ACPI\HPQ0004\3 & 21436425 & 0
I need a driver, but I find it on the HP support web page.Thanks for the help.
Sandor Turi
Go to Device Manager and click on the unknown device 0004 requiring the driver.
Click the driver tab.
Click on set to update driver.
Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp64144.
Make sure that the include subfolders is selected and the driver should install.
Then restart the PC.
I know this is the driver you need, because here, it is a partial copy and paste of the setup information file driver that shows support for the drivers for the hardware ID you have posted.
[HP.ntamd64]
DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ0004 -
problem with bios password HP probook 4530 s
Good grief, I need to clear my bios password on hp probook 4530 s
series:[personal information deleted]
UUID: 8465393F4034E111B0DE99107F1988A4
PRODUCT: A7KO5UT #ABA
I went through a few forum tells me replace the bios chip from the motherboard, but I don't want to open my laptop
Please save. the computer starts normally on windows 7, but how to enter in the setup of the bios with this unknown password.best cordially.Hello
If its under warranty then contact HP
otherwise use other sources that is available in the market...
password bios removal things... etc...
-
change startup for probook 4530 sequence s
I probook 4530 laptop s... I want to change the startup through utility and Advanced tab startup sequence (I mean the blue screen... not start hp software) when I press f1 it's see the hp system info... F2 is show system options diagnostic... F7 is to see the spare key hp window... F9 is showing boot device options... F10 hp biosetup (useless) showcase... F8 show nothing. Delete the show noting... ESC show all this key and what do... How can I get into the bios utility to change the boot priority? .. which key can I press to enter the bios setup utlity?
Product no. A1E83EA #ABV
Installed windows 7 ultimate OS
Hello
Press F10 to enter the Bios.
Go to the system configuration and choose Boot Options.
Be sure to save the new settings.
-
charge light flashing problem with hp probook 4530 s [redacted]
I have a problem with my hp probook 4530 s serial number: [edited by Moderator]. A few times while I use the continuous orange light flashing load on the battery and if I stop the laptop and try turning on the laptop, the orange charge light blinks 8 times and it is not running until I remove and insert using battery me back.kindly I'm so nervous.
more information:
Windows 7 ultimate 64-bit
BIOS version: F.25
[number removed for privacy]
Finally, I think it worked.
bios for update
Version: F.40 (March 12, 2013)
its almost 10 hours and I load/unloaded my laptop 2 times and his works fine. mashAllah.
No problem flashing light up now.
hope I never face again the blinking light problem. God willing.
Here is the download link for the latest version of the bios:
Note: the BIOS update is sometimes risky, so be careful and follow each instruction.
-
HP Probook 4530 s: how much time disk disinfectant and will secure erase?
I have HP probook 4530 s ci5
have a 750 GB hard drive (HDD) drive.
Hard drive is Hitachi (HTS727575A9E364)
I need my laptop to someone for a few days, so I need to make sure that my data is definitely missing.
I can use the disk Sanitizer or present secure erase option in the BIOS. But I don't know how long it will take?
Can someone please tell me which disk-disinfectant time and secure erase option will take to a passage?
Hi all
I just went ahead and did it. So for other people like me looking for the answer to this question, I will share my experience.
When I clicked on the option of disk Sanitizer, he gave me several choices like, 1 pass, optimum, gutmen and custom. I chose optimum, it is has had warned only that data will be permanently erased, there was no estimate of the time, I had to do, I did. After 22-23 hours of waiting, he did. And the optimum had 6 cycles of option. He showed the result below.
-
Password BIOS HP Probook 4530 s
Hello!!!
I forgot my passowords. I need BIOS password or reset. My computer are series HP Probook 4530 s [personal information deleted]
Thank you!
Max.
There is not generators of master password for ProBooks or EliteBook and most laptops class business.
You will need to contact HP.
http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003
Or look at this link.
http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility
I have a master USB external HDD with its programs that I removed hundreds of passwords with the help of Mazzif.
Mazzif program will detect your UUID, the serial number and model number, then use this information to produce an .exe file to clear the password.
If you find that it is so technical.
Or replace the BIOS chip.
If you have good soldering skills to order of the BIOS chip. You will receive a picture of the location of the chips after the purchase.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
install mac on hp probook 4530 s
Hello! CANY to hel I install mac os on my pc Hp probook 4530 system s with processor intel i5. Please, I would like to install a mac os on my pc system.
N °
(141007)
-
ProBook 4530 s: HP-ProBook-4530s-Windows-10-x32-hotkeys
Hello everyone, I have 32 bit HP ProBook 4530 s, recently I installed Windows 10 but not all access keys work (for the exodus, screen change light and etc..). Please link good Hot Key Driver for Windows 10. Thank you.
@G_Balakhadze: the problem is, there is no HP Win10 driver for your laptop. The last HP has is Win8.1.
I linked the page drivers: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881
But, as you can see, there is no keyboard driver, in itself.
You can try to use Windows updates to find the drivers from Microsoft deposits for your device: http://support.hp.com/us-en/document/c03330139
If that does not do anything, you should read this another link: http://support.hp.com/us-en/product/HP-Pavilion-dv6-6000-Entertainment-Notebook-PC-series/5048664/model/5077076/document/c04758308/
If Windows Update doesn't give new drivers, you can pursue alternative which are described in the linked Microsoft Windows Insider community thread: http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_devices/how-to-install-and-update-drivers-in-windows-10/a97bbbd1-9973-4d66-9a5b-291300006293
If you then run into trouble, install the drivers through Windows Update, you can try to use of Microsoft Windows Update Troubleshooter: http://windows.microsoft.com/en-us/windows7/open-the-windows-update-troubleshooter
Good luck -
HP probook 4530 s device missing base systΦme
This is my 5th day since I purchased this new HP probook 4530 s [LH313EA #ABV] and I like it, I did a clean install of windows 7 ultimate x 64 and I have just realized that the dose of drivers hp support page does not all drivers for the ultimate version, so I downloaded the proffesional drivers, now I have all devices are installed except two devices named base system device and I see two funds of enable fast web wifi turn on no more after this installation, the quick web background is not functional and the wifi light is still off, please help me
The hardware ID:
1 base system device
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880
base-2 system device
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2393 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2393 & CC_088000
PCI\VEN_197B & DEV_2393 & CC_0880
Hello
Download and install the driver for the card reader from the page on the link below.
Kind regards
DP - K
-
HP probook 4530 s: disinfectant
Hello
After "disinfectant" my hard drive, lost partition and OS
Unfortunately, I could not install backup
Please, guide and help me. (proobook 4530 s)Thank you
Hi @hoseinmansuri ,
To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
Even if it is a Commercial, the HP_RECOVERY partition & HP_TOOLS product is used to recover your system on HP Probook 4530 s. Here is a link that might help you. If she has deleted this partition completely, you will need to use your recovery CD.Thank you.
-
3d driveguard and HP Probook 4530 s
Hello
I recently put HP Probook 4530 s. I'm running Win7 Ultimate 64 bit. I have two questions for the same thing.
1. I installed all the drivers and it works well. But I noticed that there is still an unknown device and Hardware ID "HPQ0004" I think it is for reinforcements to drive 3D. So is it really necessary? In fact it will be useful in the case of the laptop falling or accidental damage? This will affect the performance of my laptop?
2. There is a USB 3.0 to this laptop. Recently I bought external hard drive Seagate GoFlex (500 GB). They say that it is possible to upgrade to 3.0. Can anyone tell me that how can I use this drive on the USB 3.0 port to get the best speed of transfer? Is there any software to upgrade my external drive to 3.0? How can I do?
Thank you.
Kind regards
Natasha
Hi, Natasha:
Yes, I'd install the driver of driveguard protection.
I can't answer your second question.
Best regards
Paul
-
good day to all.
Please I need the drivers following;
network controller
PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
PCI\VEN_168C & DEV_002B & CC_028000
PCI\VEN_168C & DEV_002B & CC_0280Bluetooth
USB\VID_03F0 & PID_311D & REV_0001
USB\VID_03F0 & PID_311Dbase system;
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C & REV_30
PCI\VEN_197B & DEV_2392 & SUBSYS_167C103C
PCI\VEN_197B & DEV_2392 & CC_088000
PCI\VEN_197B & DEV_2392 & CC_0880PCI simple communication;
PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C & REV_04
PCI\VEN_8086 & DEV_1C3A & SUBSYS_167C103C
PCI\VEN_8086 & DEV_1C3A & CC_078000
PCI\VEN_8086 & DEV_1C3A & CC_0780information system;
Windows 7 pro sp1
64 bit
HP probook 4530 s
Thank you.
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_94298_3&swEnvOid=4059
http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060881&swItemId=ob_92295_3&swEnvOid=4059
REO
-
HP probook 4530 s: webcam problem
Pls I can't access my webcam on my hp probook 4530 s. I don't know if I'm missing a driver but there is no exclamation point in my device manager. Please help me.
This should help if it is to win 8.
Maybe you are looking for
-
Message "this connection is not approved" for each Web site.
This has happened to me whenever I try to visit almost any Web site. I can't visit the Web site because the connection is 'Untrusted' and site identity 'cannot be verified. This happens with popular sites such as Google, Bing, Youtube, etc. What shou
-
Replacing hard drive on the Satellite X 200
I want to replace the drive hard toshiba with another. Can I use the product recovery cd to install windows vista? What are the special installation procedures apply for those upgrading their hard drive?
-
I have to format the Qosmio F30 when changing RAM?
Hello once more, I just want to know if I change my memory (RAM) I need to reformat my computer? Thank you
-
HP LaserJet M603: HP LaserJet M603 defaultinng in TRAY 1
Dear expert HP, One of my printers M603 (we have 2) wants to default print to TRAY 1 no matter what I do. I created a workaround solution using the application CONFIGURATION of PAGE such as most print jobs are diverted to TRAY 2. However, there are s
-
Why can I not see my PXI chassis from a remote computer?
I have a controller SMU-8130 and chassis SMU-1062 q. I want to add PXI chassis as target in my LabView RT project located on a remote desktop. However, LabView can not detect targets PXI and cannot NI MAX. I can see the PXI on my network and can it p