HP ProBook 4530 s Quickweb does not

Similar Questions

• ProBook 4530 s bluetooth does not

  I bought a HP Probook s 4530. The saleswoman told me that it is the bluetooth device. The original operating system installed on it was LINUX. But since I change the OS Win 7 Ultimate, I had to install the drivers from scratch. I got a few pilot installation of the saleswoman files and down them. But now on the Device Manager there is an exclamation point on the bluetooth device and there the error "Windows has stopped this device because it has reported problems. (Code 43) ». What can I do to fix this?

  Thank you

  At the start, press the F10 key to start the installation of the BIOS.

  Go to system-> Options of the integrated device Configurations.

  Check there he activated two things. State of the button wireless and built-in WLAN adapter.

  If not then allow them, save the new settings, exit the BIOS and boot the operating system.

  Download and install the software Framework HP here and restart the system.

  Download and install from here HP connection manager and restart the system.

  Check the color of the LED on the key to wireless communication.

  If it has:

  • Amber (as pictured below) all wireless devices are now closed. Press this key to change to white.

    ->  

  • White (as pictured below), the wireless device integrated, as a local area network (WLAN) wireless device or a Bluetooth® device, is on. Status is ok, so you can go to the next step.

  

  Click on start button.

  Type in the search, filed " hp connection " and choose " HP Connection Manager ".

  

  Check the status of the Bluetooth module. If it has:

  • 'Off' then make a right click the switch on the button which is pointed to by the arrow on the image below.
    When you change the State to "On" and integrated Windows 7 driver will install, and after that, you will have to reinstall again Qualcomm Atheros Bluetooth driver here.

  

  • 'On' then the module Bluetooth is working properly and should be listed in Device Manager.

  

  • are not in the application HP Connection Manager then your model has no integrated Bluetooth module and Bluetooth driver should be uninstalled.

• ProBook 4530 s sound does not work after reinstalling sound driver

  Hello

  Lately I noticed this weird sound while I was playing music or other sounds from my computer. It is difficult to explain what it sounds like but it was as if the distorted sound for one second every now and then, a little sound like a robot. I looked if I could solve this problem and found that reinstalling the audio driver should solve the problem. That's what I did, but after reinstalling and restarted my laptop it says "Nou Audio output device is installed" I made clear on the site of hp. For the moment, I have no sound. I tried to install an earlier version of the audio driver, but that no longer works. I'm sure that I have installed the correct drivers (I tried sp59291 and the sp57776 of earlier version).

  I don't know what version I have installed first.

  Additional information:

  -To install a new audio driver, I went to the Device Manager and uninstalled the current sound driver.

  -Manager At of devices under the IDT High Definition Audio CODEC there is a line called "Intel(r) Audio display.

  -In the Device Manager there is a yellow triangle with an exclamation to IDT High Definition Audio CODEC

  -J' have Windows 7 Home Premium 64 - bit installed, service pack 1

  I hope you can help me!

  Myxx

  Guess I have solved the problem, I uninstalled the audio driver, close my laptop computer and rebooted. It starts automatically install the correct driver. I hear that weird no sounds either!

• Hello.. I have laptop (hp probook 4520 s), keyboardis does not.

  Hello.. I have laptop (hp probook 4520 s), keyboardis does not. only the letters 'B' and 'n' How do I reactivate? because when I use a keyboard external usb it works? Help, please

  Helder salvation,

  Did you of recent changes made to your computer?

  We will reinstall the internal keyboard drivers and check.
  
  a. click Start, type Control Panel in the search box, press enter, click System, click Device Manager, click on keyboard.
  b. you should find the internal keyboard part as well as any external keyboard used.
  c. right-click on the keyboard integrated in the list, click on uninstall.
  d. unplug the external keyboard.
  e. restart the computer and check if the keyboard internal works.

  Since the external USB keyboard works, if drivers did not fix the internal keyboard problem, I suggest you to contact the manufacturer to check if there is a hardware problem.

  Hope the above information helps.

• Why my 4530 ProBook s (64-bit) does not have a virtual 64-bit machine?

  I have a new ProBook 4530 s and it seems to be an email from HP support for it yet...

  I'm in a seminar of the Technical Conference and we are supposed to install a virtual machine under VMWare image.

  This system is 64-bit and it is running 64-bit Windows 7 Pro, but when I try to start the virtual machine it gives an error-

  "Virtualization software is incompatible with the long mode on this platform. Long mode off. "The virtual machine image

  does not start.

  The VMWare help page says that the problem may be with BIOS. Any help?

  Had is actually * two * place.

  I changed in the Configuration of the device, rebooted, still no joy.

  Is returned in the BIOS, searched and found a changed if framework in terms of safety, from the view to change.

  Restarted, it works!

  Thank you!

• HP Probook 6465b: Broadcom 4313gn does not work after the upgrade to Windows 10

  My laptop is HP Probook 6465b (model 2012) it came with Win 7 Pro pre-installed.

  I upgraded Win 10 and after that a Wi - Fi connection does not work. Then I tried the new facility, but it's the same thing.  I have come back to Win 7, but I would like to upgrade Win 10 if I can get the WiFi adpter for work.  My laptop otherwise works fine and it is not that old so I am confused why this wi - fi adapter gives me grey hair.

  Here is what happened:

  Just after upgading wi - fi works very well until the first stop. After reboot, free WiFi does not work and there is no wi - fi adapter in Device Manager. However, it's there, but it is hidden.

  I tried freezing and relocation of the map and I downloaded the latest drivers from HP Support, but I can't get the adapter to work.

  To get the internet to work I plugged USB wi - fi adapter and suddenly the WiFi Broadcom card started working also. She even worked after unplugging the wi - fi USB adapter but after reboot internal wi - fi adapter was missing again well (hidden and does not), it is too compligated to do each time and she even does not work every time, just every now and then.

  Any suggestions?

  pavis

  Please install the driver it works with the Windows 10

  WLAN

  Qualcomm Atheros QCA9000 series Bluetooth 4.0 + HS driver

• HP Probook 4520 s screen does not do anything...

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  Fassi wrote:

  Hi everyone...

  I have a display problem with my Probook 4520 s. The screen does not show anything, not the bios boot, no windows.

  It starts really normally no other problems at all. I plugged the other external VGA monitor and works very well. But the Symbols is completely disabled does not display anything. Normally, I manage my laptop with great care.

  I chat with HP support team, they suggested

  
  

  Please perform a dry boot on the laptop by following the steps below:
  1. disconnect all external devices and adapter unit
  2. remove the battery and press and hold power for 45 seconds. This should completely discharge any residual charge in the Group
  3. restart the computer by using only the AC adapter.

  But no luck.

  Please provide a suggestion/solution.

  Thank you.

  In a dark room, boot up your laptop and shine a flashlight on the LCD screen.

  If you see a very dark Windows desktop, then you have the chance.

  The backlight inverter has failed and must be replaced. If you are a kind of DIY user, then this is a repair at low cost. If this is not the case, have done so in a store could cost @ $75.00.

  If you still don't see anything then the LCD failed. It is a more expensive repair.

  If your laptop is still within its warranty period, it's time to Contact HP warranty repair service.

  Best regards
  ERICO

• ProBook 470 G3: Microphone does not work

  After updating HP built-in microphone (chip Conexant Audio) does not at all.

  How to go?

  Hey there! @nollip, thank you for joining the HP Forums!

  I understand that microphone on your laptop is not working after the update.

  Please update the audio driver at the bottom of the link.

  Version: 10.1.684.45
  Driver Audio link: ftp://ftp.hp.com/pub/softpaq/sp74001-74500/sp74370.exe

  Please let me know the results.

  See you soon!

• HP Probook G3 450: USB does not work

  I formatted my hard drive and installed windows 7.

  None of the usb drives to work. It is common in the sub player but nothing appears in Windows Explorer, when I plug in a flash drive. When I plug in a mouse, it does not work.

  It is a platform of Skylake has no USB 2.0 driver for Windows 7 does not work. You must install the USB 3.0 driver and probably a lot of other drivers, as well.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834518 & swItemId = ob_163291_1 & swEnvOid = 4060

  There is a whole page of WIndows 7 supported for this model.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7834518 & lang = to & CC = US #Z7_3054ICK0KGTE30AQO5O3KA30B3

  Make sure that the drop-down menu to select the operating system is set to Windows 7. I assume that you have installed the 64 bit version.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• ProBook 450 G2: password does not work when you try to open a session.

  I've been connecting to my laptop with the same password for several months now and then a few days ago, I tried and it wouldn't let me, it came up with an error message saying offline.

  The password was absolutely correct and checked caps lock shift was not on.

  Via the internet on the phone, connected to the microsoft site (with the usual password) account and it let me in.  From there amended past just in case.

  New password I tried and it does not always help.

  Having read several support elements and that you have tried various things but none have worked so far.

  They say to press the windows key, and then R to get the settings but that is impossible unless connected, which can not do.

  Any help / suggestions would be greatly appreciated.

  Hello

  It may be worth trying the following.

  Firstly, an electrician from the laptop to the router/access point.

  One when you're done, start Notepad and in the log on screen, click the accessibility icon in the lower right corner, select on-screen keyboard and enter your password using this.

  Kind regards

  DP - K

• ProBook 4530 s: Windows will not start with bad secondary hdd

  HP Probook 4530 s

  Windows 10 64 - bit

  Hi all

  I have my windows installed on a Samsung 840 Series SSD 120 GB and a WD 320 HDD as secondary drive in a basket in the dvd disc space. The two worked very well.

  I got 301 MB of unallocated HARD disk space and the rest as a partition.  I used MiniTool Partition Wizard 9 wish that one partition with all the space unallocated. After the changes have taken effect, it showed the hard drive as a 'bad disk '. I thought that I should restart windows to solve this problem. After that restart the laptop is stuck on the start screen that you can access the BIOS, the caps lock light flashes 5 times several times and then stops. The hard drive seems to be on and I can't access BIOS.

  When I remove the disk hard windows starts very well.

  I solved it myself.

  Set quick start.

  then the drive gives a letter.

• Attack to the attention of Zaq 230313 QuickWeb does not, HPMini 110 - 3530NR, Windows 7

  Dear Brigitte,
  I've never been able to get internet at startup feature (HP Quickweb) work.  I use wi fi outside the House to get internet.  The Quickweb will only work if you have a direct connection to the internet?

  JC

  Hello JC.
  
  
  
  I used the serial number that you have provided to review the list.  I have not seen anything which seemed to be a GPS module.  So, I don't think that your laptop has this ability.
  
  
  
  I hope that you are having a good afternoon.

• ProBook 4320 s: computer does not turn off

  Hello

  A few days after the last update of window 10 s can not turn off.

  She can go sleep, but turn off the result probook on reboot.

  Ask for advice

  Tanks

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close windows open and stop the laptop by right clicking on the icon in Start Menu, select (Admin) command prompt and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start the laptop and let Windows take over completely for a few minutes before checking if it is now shut down properly in the Start Menu.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• ProBook 4720 s bluetooth does not

  My ProBook is only week old and today I tried to connect my bluetooth, Razer, and Kensington, mouse to him. Laptop recognizes them, they appear under the devices section, but are completely unusable - cursor will not move. Then tried to connect my phone Nokia and Sony Ericsson phone and same thing - they appear under the devices section, but I can't send/receive files. Don't get message "no service found" under properties for mouse and phones appear also no bluetooth service.

  I have the Broadcom 2070 bluetooth USB\VID_0A5C & PID_21B4 & REV_0481 device hardware ID.

  I started with Ubuntu live cd and also same thing happens, devices not detected but do not work

  I am pleased to announce that I have solved this problem I started to try all the listed drivers manually and I got it work Yeheyyy, I'm so happy I have no idea are drivers now my real card drivers or not... I guess not... but as they work, I don't touch any more - they say Broadcom 2046 2.1 EDR USB. Weird stuff. All I changed in my system, upgrade to Windows 7 SP1 before you try my bluetooth devices...

• HP Probook 450: Biometric feature does not

  Biometric authentication is not working properly, when I log in I get a message that says that the HP security tools. I HAV to connect without biometric features or wait 30 seconds and guest starts again. I've always done the finger swipe use as proof of identity, and after update, I can't even reset my settings to the biometric parameters.

  Please help me solve this problem, it's annoying to type complete password all the time before the opening of the session, or opening screen once it was disconnected.

  Thank you

  J

  Try to upgrade your HP ProtectTools for the latest version of HP customer Security Manager (HP ProtectTools rembranded), SoftPaq 68157, at: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68157.exe