Similar Questions

• LaserJet M3035: Removed option tray - Tray empty error

  I removed the Assembly optional tray 3 on a HP LaserJet M3035 printer and now there is a message that tray 3 is empty.  How can I turn off tray 3?

  Where is the message?  On the computer or on the printer screen.  If on the computer go to settings then installable and peripheral and driver options and specify tray 3 and was not.  If on the printer screen and you have removed the Assembly complete (charger and plateau), then to be honest I have no idea.  Did you turn the printer off and then back on I trust.

• HP LaserJet 3800 DTN optional tray 3 will not open (but empty)

  I have the optional tray 3 for a HP 3800 DTN laserject

  3 tray does not open.

  I have removed the printer and cannot open it.

  It appears that on the left side has some kind of catch which will not be shared. I say this as wel I try to open the drawer, it tilts to the left (the right tries to get out but the left side crashes upward).

  Please notify.

  I solved the problem myself.

  There are 4 feet at the bottom of the tray 3 optional. The 2 to the front of the unit have screws. I removed the screws and waved the units of feet that double as guides of drawer slide. Once both have been removed, the sliding drawer.

  The problem was spring loaded pressure feeder had been stuck in a State more compressed inside the drawer box. The guides of slide based feet have a trigger output on them which frees pressure loaded spring trough when the drawer is pushed into the tray of the firm. The spring loaded drawer charger never push completely compressed while the inside of the cabinet drawer, and outside the cash drawer. If the spring supply pressure responsible is locked in it more compressed position inside the cabinet drawer it cannot slide past the release trigger wihtout withdrawal based foot feet.

• Is it possible to change the default print on a HP LaserJet 500 printer M551 color tray

  Hello

  Is it possible to install the default print to the HP LaserJet 500 color printer tray M551 be impression tray 2 times online and live?

  If so, what would be the best way to go to implement?

  Thank you

  Hi thanks for taking the time to answer.

  In the end, I gave a call to HP support, and they explained to me that the default tray will always be Tray 1 if it is open, and if you add additional bins, one at the bottom will become the default tray.

• LaserJet 8100 tray 3 lift

  We have a Laserjet 8100 and the tray 3 empty is displayed. Don't lift the tray. We replaced the rollers, and the tray, but still having the issue. Is there a part to replace that works?

  Thank you

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  I hope this helps!

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• Duplex printing on letterhead on the wrong Page and backwards!

  Hi all

  I googled this question and it seems that many have the same problem, but none of the solutions seem to work for me!

  I have a LaserJet P2055dn.  In 'tray 3', I have paper with a letterhead on one side.  It is in the status bar with letterhead down and towards the front edge of the printer, which works fine when I print a page.

  However... When I tried to print the pages back to back, it prints pages 1 to the last page, page 2 on the first page, and the two pages are in reverse!

  I realize I could exceed a flip manually the paper in the tray, but I'm evolving as to if I need to single page and pages back to back.

  I made sure the latest driver has been downloaded and installed, and I tried to change the following settings:

  Printing options > advanced > header Alternative Mode 'On '.

  Paper source: plain / header / pre-printed (have tried all)
  Print on both sides: Yes, Flip on

  Is there a way to change the settings so that I don't have to keep exchanging the paper around the status bar?

  See you soon

  Glenn

  With many printers. the 'face' paper must be loaded in the trays in a way for Simplex jobs, but in a different way to work two-sided .

  Some printers offer Alternative letterhead Mode (according to your comments, your printer seems to be one of them), in which case media that are declared with a Type of paper , letterhead can always be loaded in a sense (the necessary way for double-sided work).

  With the work front, the printer then automatically manage switching sides (probably by adding a blank page and print front and back of each front page).

• LaserJet M603: Laserjet M603 feedback Lite & NOT enough dark

  I have a new Laserjet M603 that prints to lite. When you change the settings for printing darkness, it will between lite and very lite, ever more dark.  I use only the HP cartridges, changed drivers, printer made think it is another type of Laserjet and believe has changed most if not all of the default settings that may control printing quality and or darkness. Also updated firmware to update to the latest version thanks for any HELP!

  Again, I think that it is related to the toner cartridge.  You have the information a lot of code contained in toner cartridges you use?  Have you taken an ink cartridge that prints well in another M603 and tried in this printer?

• LaserJet 600 m602: Laserjet 600 too large print the number of copies

  I work at the public library, and we have a Laserjet 600 m602 to our public access computers to use. It is a network printer. We have problem with printer what impression of the office 2010 products, if more than one copy is requested printer will go crazy and print several copies much more than requested. The printer screen will say 1 X print the number of copies. Only way to stop it is to remove as many jobs he sees. It acts as if it were several jobs. We do not see this problem when printing from the Internet. Driver HP laserjet 600 M601, M602 M603 PCL6 HPCM600c. processor is set to WinPrint - Raw. Bidirectional support is disabled.

  Firmware is 2305090_000468

  I had already installed the pilot PCL6 universal and implemented to date to 600 M601, M602 M603 PCL6 thought that could be the problem but it has not fixed the problem.

  I would appreciate any help on this matter before going to is broken on paper.

  Thank you

  Melanie

  Solved.

  After a lot of research on reading and tests finally discovered the problem with drivers print and collate. Default settings for Microsoft Office 2010 and Adobe Reader are to gather if one that one copy is activated. For some reason any that caused printer to go crazy.  I tried the Standard driver and universal for the printer, but always had the problem of printing too many copies. I used the PostScript driver and it solved the problem.  Now just get the number of copies required. Thank you for your help.

  Melanie

• M603DN: Laserjet M603DN tray 2 not up.

  I have a laserjet M603DN that once powered on the lifting of sandbox 2 shows continuously.
  Fan 101 turns and after a few seconds, but never ceases. No other engines don't turn.
  Had a DC power controller and power for an another M603DN (midwest Lightning) and used
  them in this printer. No help. It will show if tray 2 is deleted, I can access to the
  menus, but it does not print even from Tray 1. Impossible to find pieces of paper anywhere
  in the paper path. I switched from a working printer fuser
  (his party to the user), and I tried to do a motor test with and without
  the formatter is installed. Just today, I replaced the tray lift motor. The problem remains.

  I replaced EVERYTHING in this thing I could, another warehouse shipped us an M603 they let fall down the stairs. Swapped motors, fans, fuser, tips... and now will print a page, then give unexpected paper size error and will not print page 2 or more. PS106 and PS103 now test the bad. The printer broken is broken in this area so its sensors are too bad. I can't find the sensors online. I now have a good true stock of spare parts for the next. Thanks for all the help.

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.