S/o: Print server

Similar Questions

• The mobile application HP ePrint and print server

  Can I print from the mobile application HP ePrint for HP Officejet 4500 g510a printer connected to the router via TP-Link PS110U print server?

  HP Officejet 4500 HP ePrint mobile app supports only, but has no wireless or Ethernet capabilities. Can I use TP-Link PS110U for Officejet 4500 to connect to a home network? Can I use HP ePrint mobile Android app?

  What do I need enter instead of the email address printer ePrint mobile application for network printer without support ePrint (only the HP ePrint mobile app support)? Do I need to use the printer IP-adress?

  Hi Xaron,

  Welcome to the Forums of HP's Support.

  The printer model that you gave in your post, HP Officejet 4500 G510A made unsupported wireless or ethernet connectivity.  Without one of these methods of connectivity being available, there is no way taken in charge for the printer to communicate with a wireless device using the HP ePrint app. I've included a link to your printer's specifications.

  HP Officejet 4500 (G510) all-in-One printer Series product specifications

  http://support.HP.com/us-en/document/c01954185

• Cannot find the .inf to install HP 5600 print server port

  I try to add a server port to print to my printer HP 5600 on Win 7.

  Go to "Properties of the print server" select port and get message 'new port type' print server ' food printer inf to install the port monitor intilation information. »

  Cannot find the INFs on any CD progrm supplied with the printer.

  How can I add a 'print server port' to the printer if my USB Linksys printserver. This print server works fine on my other computers on my home network.

  Finally found how to manage the Linksys. You must set up a TCP/IP port not a port of the print server.

  Link http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=22034

  complete set upward for win 7

  Bob

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Printer on a print server preferences

  I have a print server running Windows Server 2012 R2 with several printers.   When I change the preferences to change the printout of sorted at Noncollated and apply the setting and click ok, the settings do not stay.  Ebb in the settings that they began to sorted.  How can I save these settings?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Need to shoot more than 30 days list of printers Windows 2008 R2 print server offline

  In our environment, we have windows print server 2008r2, to get list of printers which is more than 30 days any idea? any Script?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Assessment capabilities of Windows print server for a large company automated printing solution...

  Hello

  I need a solution to print server for a large organization. Need your help in evaluating Windows print management for this purpose.

  The case:

  A centralized system correspondence generation will produce a "zip of PDF files" to print in various branches around the world. I expect to send the zipOfPDF to a centralized, Windows print server. From there on, it should be forwarded to respective branch local windows print server. I expect the following system:

  1. the centralized windows print server must be able to read zipOfPDFs and associated metadata.

  2 centralized windows print server must be able to route (spool) the zipOfPDF to respective branches (metadata will include details of the branch). (Indicate if the custom coding is necessary for her or can be supported out of the box?)

  3. local windows print server receive the zipOfPdf and extract the metadata.

  4. extract the zip file and extract the files PDF.

  5 read the metadata and move to designated PDF printer files (metadata will be printer details)

  6 set the priority of print according to the metadata set. (The metadata will be priority printing details).

  7. create a record/report after printing the zipOfPDF.

  Indicate if

  1. it can be supported by the Windows print server instead of first? What operating system/printing system will be necessary?

  2. If so, is - all of this can be supported by out-of-the-box configurations?

  3. If no, what any custom coding may be needed and technology?

  4 propose a scheme of it if possible.

  Thank you and best regards,

  MILIN

  + 91 9911523045

  Hello

  The question you posted would be better suited in the TechNet forums.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• CP 5225: Print server for HP Color Laserjet CP5225

  We have a HP Color Laserjet CP5225. The printer has USB connectivity. There is a network (RJ-45) port, but it is disabled.

  We want to get the printer to print directly through the network.

  The HP Web site suggests Print Server HP Jetdierct ew2500 (HP CP 5225 is in the printer compatibility list). However ew2500 is not available.

  Please suggest a different print server for printer HP CP 5225.

  You should be able to use any wired usb print server.  The server does provide a connection to the usb port on the printer so if you can communicate with the server via ip, then you just to load the driver and connect the prnter as a local tcp/ip printer.

• Server 2008 - adding the role of print server to access the tools of PrintBRM?

  Hello

  I have Windows Server 2008 with about 50 + printers currently installed. This server is configured to use Terminal Server services.

  I want to access the PrintBRM tool to export this configuration for the additional Terminal servers, but I don't have the active print server role.
  If I add the role of server printer so I can use PrintBRM, will this affect my configuration current impression? I will start adding printers through print management?
  I appreciate the help!

  Figured it out.

  Another server in 2008 with the role of print server already installed can remotely back up and restore a Server 2008 configuration of the printer using printbrm.
  Backup:

  %windir%\System32\Spool\Tools\PrintBRM s------nom_ordinateur_source b f filename.printerExport

   

  Restoration:

  %windir%\System32\Spool\Tools\PrintBRM s-nom_ordinateur_destination - r f filename.printerExport

   

  Help:

  %windir%\System32\Spool\Tools\PrintBRM /?

• OfficeJet 7612: I need drivers for copy on print server - do not install it on any machine

  All the drivers on the website seem to settle on the machine that I use. I have a print server that is Windows 2008 CORE so I connect from my machine to the server to configure each printer; and I need to have the driver installed on the server where it loads the driver on every machine that attaches to the printer.  I need a zip file containing the driver files and inf so I have copied on the server and each machine will install them automatically when they connect to the printer.  The HP Web site account EXE files to be installed on the machine, that I'm working on so I can't find the INF files and the driver that needs to go on the server.   It's very frustrating.  How can I get just the drivers?

  Hello

  You would need the program standard executable installation used for an another Windows operating system, but the method of installation must be done manually.

  Download the following drivers on your desktop and extract it in a place of choice (with Winrar or 7Z),
  Or by running the file, once the configuration dialog box open Explorer files, type %temp%, and then press enter and open the folder extracted from HP that begins with 7z (e.g. 7zS1234):

  http://ftp.HP.com/pub/softlib/software12/COL47661/MP-115385-2/OJ7610_Basicx64_971-2.exe

  Then follow this articale to install the drivers of the CMD using the MSIEXEC command:

  http://support.HP.com/us-en/document/c03351547

  Kind regards

  Shlomi

• HP UPD PCL5/PCL6 W2k8R2-Print Server issues a one by a particular software

  Hi all

  We have a print server W2k8R2 and we want to use only the HP - UPD (PCL5/PCL6), for all HP network printers.

  Some printers alongside some with PCL5 PCL6. Printing from Windows is no problem on PCL5/6.

  But we ge issues with printing form a particular software (Compuware Uniface).

  The printer works with PCL6, everything is ok, Windows/Uniface.

  But if the printer works only with the UPD PCL5, we get a few small problems.

  -WIndows print jobs

  Uniface - print Don t: instead of the text, we get only a special character (@7\? *'´_ -! %&/\} [])

  and it's unusable and useless

  What is the difference between PCL5 and PCL6? because in Windows, it works.

  Can someone help me?

  In this case, if it is only with interactions with this specific program, then it is likely that this program is not designed to be used in the way that you use it in. If the printer does not have any problems with other functions or applications, then the software and the mechanics of the printer work properly. The problem seems to be that the program you are using is not properly able to communicate information to the machine, and what information gets the machine is not able to be understood by the printer.

  Is that correct or is there more information that might change the analysis of the issue in this case?

  Let me know!

  -Spencer

• LaserJet Pro 500 M570dn MFP: Print server wireless for LaserJet Pro 500 M570dn MFP

  Hi, use that in a SOHO environment, low volume, a few client machines. Has been wired Ethernet before, but after a move, I need now it wireless (I have 802.11 B/G/N/AC available). I want to keep the functionality of scan-to-network-folder in addition to printing. Should what print server I use? There is such a range of price, and none of them indicate compatibility with the M570dn I see.

  Thanks in advance for any help!

  Can try for Ethenet power adapters.   Pretty cheap.

  https://www.Amazon.com/s/ref=nb_sb_noss_2?URL=search-alias%3Daps&field-keywords=Powerline+adapters

• Manage print server permissions in Windows XP

  Hello

  In Windows 7, there is a permission "Managing the server" available in the properties of the print-> tab security server. If it is enabled for a particular person or group, the user/group can can remotely add shapes to the print server (programmatically using addForms call on the shared printer) and do other operations, which are generally not allowed to the non-owners.

  There is a similar option in Windows XP? I want to grant this access to remote users in XP.

  Could you please help?

  Hello

  To set print server properties, see this link:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_setting_printserver_propsw.mspx?mfr=true

  For more help, please post your question in the Technet Forum: http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

• Print server - you do not have sufficient permissions to connect to this device

  Hello all, received a tricky for you.

  Have several printers of various types and brands that are shared on a 08R2 print server
  All users have even permission sets.
  All computers built the same, running Windows XP, fully patched
  Print drivers are the latest universal drivers for any printer model to help, with most HP, Dell and Xerox.

  A user on computer A can connect to the printer without any problems
  User on computer B receives, you don't have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer A gets you do not have sufficient permissions to connect to this printer, connecting to the printer
  B the user on computer B can connect to the printer without any problems.
  User C can connect to the printer from any computer without any problem.
  User D can not connect to printer from any computer.

  Once, all users have been confirmed 4 times to have the same exact permissions. All user accounts have been re-created at least twice at this stage. All systems that have been tested have been rebuilt at least twice, the print server started as a 03R2 with this same problem and has since been switched to different materials and is now running 08R2 and still getting the same problem.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• Is there a difference through the add printer from the Menu then simply open the print server in the Explorer, and then right-click on the printer you want, and then hit?

  Add a network printer (add printer vs right-click-> Connect)

  Hey just have a quick question that I can't find anywhere.

  To add network printers is there a difference through the add printer from the Menu then opening just the print server in the Explorer, and then right-click on the printer you want and pressing on connect?

  Hello Doughty08,

  No, there is no difference. Both methods will install the same printer available driver and the two will work the printer even.

• Wireless-G print server will not print

  I just installed my print server Wireless G on my Windows XP Pro and it is connected to my router wireless, but when I try to print nothing happens. My wireless router is a Cisco WRT54G2 V1 and my print server is a WPSM54G V1.1. I can print from my laptop with the print server, but my desktop connected to the print server pc can't. All the lights are on and the printer is ready and he is not in offline mode. I took the documents and he used always print

  My office is a Windows XP Media Center m7560n

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3189597

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:

  TechNet Windows XP Service Pack 3 (SP3)

  Hope the helps of information.