CP 5225: Print server for HP Color Laserjet CP5225

Similar Questions

• need printer driver for HP Color LaserJet 3600n running Windows 8

  Need printer driver for HP Color LaserJet 3600n running Windows 8

  Click Next if you Win 8 pro 64-bit

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=501046&prodTypeId=18972&prodSeriesId=501044&swLang=8&TaskID=135&swEnvOID=4132

• CE712A: Driver for HP Color Laserjet CP5225 for Windows XP Professional

  I can't find a driver for my OP de Windows XP Professional 64-bit for my CP5225 printer. Can anyone help?

  In other words, the printer is connected to your network with a rj45 cable I guess.  If yes you must go to the information on the printer menu and print a Setup page that will give you the address ipv4 of the printer.  It should be something like 192.168.1.12 now on you computer xp go to printers and faxes and add printer.  Local printer and do not check autodetect, then and on this screen, click on create a new port and the menu drop-down select standard tcp/ip, and then click Next. Type the address of the address of the printer (ipv4) that was on the configuration page and just keep on going until you get to the page of decision-makers.  On the left choose HP and will work on the Strip right down to Color Laserjet 8550 PCL or PS as long as one or the other, and then click Next and change the name to HP CP5225 or whatever you want to call the printer and you can check on this page to make it your default printer.  Complete and you should now be able to print to the printer.

• Driver for HP Color LaserJet MFP Pro M PCL 6

  64-bit driver for HP Color LaserJet Pro MFP M477 PCL 6: I have one of these printers, which is able to print double-sided automatically.  The new driver (64-bit) will not accept when I switched to a new laptop, manual duplex printing.  Does anyone else have this problem?  I updated the driver, but the problem persists.

  I managed to find the solution... it is a lot harder than I imagined composed I don't remember clearly how I found it.  But I think it's what you do... Use the control panel to get to the devices and printers, right-click for properties of the printer, then select device settings, then select installed in the duplex unit.  Yes... complicated.  How the average dumb guy like me never to solve such a problem?

• How do I know what toner cartridge for HP Color Laserjet CP1215?

  I have the HP Color Laserjet CP1215 printer. The vehicle currently has the following four toner cartridges.

  CB540A - black

  CB541A - Cyan

  CB542A - yellow

  CB543A - Magenta

  Trying to find replacement for the printer cartridges, I see several different cartridges options, such as the CC531A, CC533A, 124, etc.. So my questions are?

  1. What are the different types of cartridge available for HP Color Laserjet CP1215?

  2. make the serial numbers indicare or say anything?

  3 HP has a number where I can call and buy cartridges of.

  The correct cartridges for your printer is located in the HP SureSupply Site.  You can also order on this site, in the United States there free shipping next day company.  It appears for your printer you should of 125A cartridges, your post numbers are compatible with those contained in the SureSupply site.

• How to load the driver scanner for HP color LaserJet 2840 via ethernet

  I am trying to load the scanner driver for HP color LaserJet 2840 via the network. When I got to the driver download page, I have two choices. We're driver HP color LaserJet 2820/2840 PCL6, the other is HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play I don't know which I should choose. So I downloaded both.

  Then I followed the instructions on this page... http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=. I have correctly installed the driver HP color LaserJet 2820/2840 PCL6. But I do not know if the driver drives the scanner. And I could not print any test page either. I don't know if I installed this driver properly.

  But when I tried to follow the instructions to install the driver HP color LaserJet 2820/2840 PCL6 Plug and scan/print driver Solution play, I was confused when I tried to select the .inf file. There are a lot of .inf files in the directory. I had no idea which one I should choose. Also, I tried to run the EZInstall.exe, but it seems to only support direct connection via USB and not via the network.

  Could someone help me with this? Please let me know which version of the driver should choose, and how do I load this driver.

  Thank you!!

  One supports network connections, the other being a pilot plug-and-play (PnP) is configured to initialize and works with a USB connection.

  Let me know if makes you better in the right direction.

  Have a wonderful day!

  -Spencer

• installed slow start with driver for HP Color LaserJet CM2320nf MFP

  I have Windows 7 pro 64-bit installed. After that I installed the latest driver for HP Color LaserJet CM2320nf MFP, my network is not initialize 2 to 5 minuets and the PC won't start any programs until it does. The printer works very well after starting my network it's just frustrating to have to wait this long. I have the printer plugged into my Intellinet router and the printer set to DHCP for IP setting. I asked HP about this problem and they can't help me because it is a software problem and not hardware related

  Edit: I have a program of snooper network called Netscan indicates the printer working group is "WORKGROUP" and my working group is "MSHOME". This would cause problems? I can't find a way to change the workgroup printers.

  Jim

  Hello
   
  Perform the check and the boot if the problem persists.
   

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: perform step 7 to reset the computer to start as usual after the boot process.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Hope that helps.

• How to add the print server for HP M1132?

  Hello

  Sorry for this post in this forum but I don't know where to go.

  I have a USB HP Laserjet Professional M1132MFP printer and I would like to connect via wifi using a print server. I use the TP-Link TL-WPS510U for this.

  I managed to set up for printing but the scanner doesn't work!

  No one can tell me, it is this possible scanning print server for the printer model? If I buy another print server will work? No one can tell me what print server needs this printer?

  Sorry for my bad English, I'm Spanish speaker.

  Thank you!

  Thank you for your response. Finally I try with a different print server: TL-PS310U. Now, I can print and scan. The only problem is that I have to wait 2-3 minutes to make it work. If you wait and connect before 2-3 minutes I get conection error in the console of the print server.

• Assessment capabilities of Windows print server for a large company automated printing solution...

  Hello

  I need a solution to print server for a large organization. Need your help in evaluating Windows print management for this purpose.

  The case:

  A centralized system correspondence generation will produce a "zip of PDF files" to print in various branches around the world. I expect to send the zipOfPDF to a centralized, Windows print server. From there on, it should be forwarded to respective branch local windows print server. I expect the following system:

  1. the centralized windows print server must be able to read zipOfPDFs and associated metadata.

  2 centralized windows print server must be able to route (spool) the zipOfPDF to respective branches (metadata will include details of the branch). (Indicate if the custom coding is necessary for her or can be supported out of the box?)

  3. local windows print server receive the zipOfPdf and extract the metadata.

  4. extract the zip file and extract the files PDF.

  5 read the metadata and move to designated PDF printer files (metadata will be printer details)

  6 set the priority of print according to the metadata set. (The metadata will be priority printing details).

  7. create a record/report after printing the zipOfPDF.

  Indicate if

  1. it can be supported by the Windows print server instead of first? What operating system/printing system will be necessary?

  2. If so, is - all of this can be supported by out-of-the-box configurations?

  3. If no, what any custom coding may be needed and technology?

  4 propose a scheme of it if possible.

  Thank you and best regards,

  MILIN

  + 91 9911523045

  Hello

  The question you posted would be better suited in the TechNet forums.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Should there be locking plates and joints locking on cartridges on Color LaserJet CP5225?

  We ask the support of HP in Russia several times, but they cannot tell us:

  should there be blocking plates and locking seal on cartridges on Color LaserJet CP5225 or not?

  
  Maybe it is not the correct names for these articles in English, but I hope that my question will be understood.

  We just bought this printer and have a dispute with the store on this theme.

  It is a very major question for us in the situation.

  PS why the manufacturer regional technical support is unable to answer this simple question?

  P.S. We also wrote to Russian technical support via the HP web site and have no answer for more than two weeks!

  The cartridges are shipped in the printer and when you first power that they go through a process called alienation, the cartridge is 'open', so the toner is not in contact with the drum, closed power for the first time the toner cartridge and drums can work. in the United Kingdom, when the training I often show engineers one ankle clothing, we use Spring hanging out washing on a line, squeeze one end and the other opens, it is similar to the alienation, a cam turn, based on the cartridge and opens or closes.

  There are no seals or strip to remove, you unpack the printer, plug in and turn on, alienation is preparing the cartridges.

  There is a known issue with the loss of magenta or cyan, the symptom is the color will be poor and can fade in page or it is may be missing completely.

  One is there is a black plastic Panel, when you open the door, it is above all the cartridges, this can loose so that it touches the magenta or cyan causing loss of color, in some cases this Panel comes off when the printer is shipped.

  It can be difficult to see, but if you remove the cartridges you can see left and right panel is in contact with the metal frame (when you look up at the top of the cartridge cavity), in the Middle you may see a gap of 3 or 4 mm and the Panel may be a little lower When the alientates of the cartridge during printing it touches this Panel and rub off.

  If it is the plastic Panel, it can be very difficult to see the small space, we saw that several times in the United Kingdom and sometimes replace the Panel in order to ensure a good fit.

  I can't put the photos of this on an open forum and here, the opinion of HP is not public, so this is a situation that you would need to print test pages and HP would repair or replace if necessary.

  Without being rude, it would sound the store aren't give you good advice?

• A3 double-sided on a color laserjet cp5225 envelope

  Hi, I would like to know if it is possible to print an envelope of A3 double-sided on a color laserjet cp5225

  You are gladly welcome Armand!

  The speciifcation above refer to the series CP5520, so the CP5525dn provide the same features listed by the specification above.

  This specific forum dealing with patterns of consumption of HP, the B Color Laserjet size sweepers are commercial products.

  Although I can help you better understend any specific product information, I am less familiar with these product lines.

  I recommend you to check the business communities whose expertise in this type of product.

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413#.T9r_1cWN98E

  Kind regards

  Shlomi

• HP Color LaserJet MFP M277 Pro: No software or drivers are available for HP Color LaserJet Pro M277dw MFP

  Trying to download the latest drivers (I couldn't scan with Easy Scan more after the release of macOS sierra 10.12) I received the following massage

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-m277-series/7089945/model/...

  No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product home page.

  PS: My OS has been identified correctly in the web page.

  Hi @pisca46,

  Thank you for joining the HP Forums!

  I understand that there is no drivers for your HP Color LaserJet Pro MFP M277dw on Mac OS X 10.12 Sierra. I am pleased to see that for you!

  You are right that there are currently no drivers available at this time. In the meantime, I suggest trying the rest of this guide, of install a printer Mac driver by using Apple Software Updateand then try using the Apple Image Capture.

  Otherwise, all we can do is wait for the drivers and software provision, or plan to use an older version of Mac OS X.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• color laserjet pro m252dw: How do to return/difficulty recent update of firmware for hp color laserjet pro m252dw as now does not

  My printer color laserjet (color laserjet pro m252dw) no longer works due to not recognize a black cartridge to third because of a recent update of the firmware. Error given is 'Supply memory error'.

  I already looked to the top of the page of Software Support for this printer, but new and recent firmware update is not released/listed, only the firmware upgrade market is given.

  I'd appreciate advice and instructions on how to return/repair my printer no longer print.

  Can you please advise on which firmware update to install instead to get my printer back in the order of operation?

  Thank you very much

  Geertje

  PS: HP: how VERY boring; next time that I'm in the market for a printer I have will conduct the review of my options

  According to the other thread that I have commented on the user managed to solve the problem of roll back firmware version 20160331 to 20150716 .  Unfortunetly the user did not comment if the old version of firmware is out so that we can share a simlilar solution.  It may be that this person had a copy archived in offline mode or found another source outside the HP support Web site.

  At least you can get an older version of firmware all the steps that we share for the firmware downgrade won't do you no good.  I'd be careful to search a German site for firmware updates.  HP has put regional locks in place according to international contracts, that they do to market their products in a given region.  Using a German firmware on a printer WE made may have strange side effects on what types of cartridges are allowed.

  What is perhaps a better use of your time would be to contact your 3rd party cartridge company and see if they can send you a cartridge that is compatible with the new firmware.  Chances are that they have seen the same problem with other users and already have a chipset to work around the problem.  In this way, you can stay on the newest firmware and continue to use your favorite too cartridges.

• HP Color Laserjet 1600: Driver for HP Color Laserjet 1600 10 Pro 64-bit Windows

  When a driver available for the HP Color Laserjet 1600 for 10 64-bit Windows?  It printed fine with Windows 8.1, but since the updgrade Windows 10 it prints nothing.

  Thank you

  JN

  I answered my own question or find a temporary solution until the official driver is published. After a few successes and failures with different drivers HP Color Laserjet, I downloaded the driver communication USB LaserJet of HP (DOT4) of Windows 8 and higher (64-bit) , located at the link below.  It is listed for the printer HP Color LaserJet 3700 , but it worked for the HP Color Laserjet 1600 as well.  Hope it helps someone.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=315850&swLangOid=8&swEnvOid=4192

  Thank you

  JN

• Solved! Driver solution Windows 7 for HP Color LaserJet 3550

  I did get the printer HP Color LaserJet 3550n (3550 family) printer to be installed in Win7.  This printer is the only thing that do not start with Win7. In the printers and devices window, I tried troubleshooting, but it was a problem with the DOT4USB drivers. Similarly for the others, I managed with the following solution:

  (1) went to HP and downloaded the Vista 32-bit drivers for the 3550, the unpacking to C:\HP CLJ3550\, as suggested by the driver file.

  (2) devices printers & a

  (3) I chose the first 'device function' so .

  (4) I selected the second and third function (which were and and did the ...) for each.

  (5) I disconnected the USB to the printer, I went back to devices & Printers and selected .

  (6) I chose and installed the printer.

  (7) it wouldn't work unless I "let" Windows makes the default printer

  (8) after that it was over, I did on my favorite printer and selected, and everything worked.

  Thank you
  your advice really helped.

  assign a default value for the first floor help really.

  Only one extra thing is that on the main pc, you must install the driver for a new printer that should be default and a new share name.

  Then on another pc with 64-bit windows find the printer and install the 64-bit driver seperatelly.

  in this case, everything is perfect.