S processor ProBook 4525 replacement

Similar Questions

• HP Probook s 4525: HP Probook 4525 s memory clock

  Hi guys.

  Recently, I did a upgrade to my Probook 4525 s. I decided to add an another ram 4 GB 1333 MHz PC3 - 10600 module for an existing (Samsung M471B5273CH0-CH9). After I did it I discovered that both modules run together @ 1066 MHz and timings base as if only one module is installed in the system.

  So far, I tried to exchange with others 2 independent modules (a samsung and a SKhynix) where both were 1600 MHz PC3-12800 spec but the system still works @ 1066 MHz.

  The data sheet for Probook s 4525 said it supports 1066 MHz and 1333 MHz. But it never works at 1333 MHz. With the module specd 1333 or 1600 specd.

  Any thoughts on this topic?

  Mine is running CPU AMD Phenom II P960 with AMD HD5470 graphics processor dedicated.

  Hello:

  This link indicates that the processor will only work the memory at 1066 MHz.

  You can install the compatible memory back (1600 or 1333 MHz), but it will only work at 1066 MHz.

  http://www.CPU-world.com/CPUs/K10/AMD-Phenom%20II%20Quad-core%20Mobile%20P960%20-%20HMP960SGR42GM.html

  Memory controller

  The number of controllers: 1 Memory channels: 2 Supported memory: DDR3-1066, DDR3L-1066 Maximum memory bandwidth (GB/s): 17.1

• HP ProBook 4525 s will not be under tension

  • Name of the product and the operating system:

  HP ProBook 4525; 12.1, 64-bit OpenSuse with the latest updates

  • Description of the problem:

  Laptop will power not at all, as if there is no power pluged - in. No lights turn on either.

  I tried reset hard several times - I even re-installed the battery CMOS with no effect.

  The problems started when the laptop suddenly stopped just as I started a certain PC game. After that the monitor is not

  production of image more, even if the laptop perfectly worked fine when it was pluged in to an external monitor.

  Knowing that I decided to buy a new monitor to see if it is the source of my problems.

  But ever since I have pluged in the new monitor to the laptop will not react to something else - as if no power is present. Some noise may be heard if I leave the battery pluged (I suspest just battery) but it disappears as soon as I plug the laptop to the power adapter.

  Any help would be much appreciated!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .
  
  
  
  I hope this helps.

• How to disable the touchpad on Probook 4525 s permanently?

  How to disable the touchpad on Probook 4525 s permanently?  Can I uninstall the driver in Control Panel, but the next time, he is back on again once.  I use a usb mouse and touchpad is simply in the way when I type.

  Damy salvation!

  There are a few options depending on your OS and your version of TouchPad.

  • The best option, if it should be available for you is:

  New drivers (at least the V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  Here's a 16.2.X TouchPad driver for the ProBook series - it can run on your laptop:

  sp58647 Synpatics V.16.2.10.12

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Another method that may work with a driver older if the best option isn't available:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Turn off the TouchPad.

  Close

  Ok

  
  NOTE if this alternative is available, it is very well, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ===================================================================================

  I hope this helps!

• 4415 proBook s: replacement of the optical drive - need a support and screw

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  NuttySquirrel wrote:

  Hello

  I'm replacing an optical drive, reference 535816-001 for a 4415 s HP's Probook. I've lost the support that attaches to the rear of the optical drive, seen in Maintenance and Service of Guide on page 68 (http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c01918897-3.pdf). The HP parts store said that the replacement of optical discs does not understand the support. I also talked with HP Support, and after putting me on hold and check with their supervisor, said that there is no spare part for the optical drive carrier. Does anyone know of a place to buy a replacement media for optical drive 535816-001 part number that would be compatible with a 4415 s HP's Probook?

  I also need a Phillips PM2, 5 × 7.0 live which blocks the optical drive to the computer. I saw screw for sale online kits, but was not sure if someone knew a place where I could buy one.

  Thank you very much for the help.

  Wait, I don't understand it how can you lose this part if you already work on it? And for your parts, you should look on eBay if they have this hardware and screws for your car as well.

• 4045 proBook s: replacing the hard drive

  I'll replace it my hard drive with a new

  the other hard drive is toshiba, which had a breakdown
  So what the best hard drive type for my laptop?

  Hello

  Download the manual from the link below and check page # 78 of Chapter 4. You can buy any brand of hard drive.

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c01905586-6.PDF

• upgrade processor ProBook 6570 b

  can I upgrade my processor intel core i5 to i7?

  Yes.

  What follows is the compatible processors as seen in the picture. They must be the exact model CPU as shown.

  

  Best regards

  ERICO

• 4525 proBook s: Hp ProBook 4525 s BIOS password recovery.

  Hello.  I had an opportunity and I'd love to be able to wipe the OS and reinstall, but the previous owner put a password on it.

  UUID is [personal information deleted]

  And the SN is [personal information deleted]

  HP Probooks are Enterprise class laptops equipped with safety standards.

  If the laptop does not give you with a system to screen lock code after you put in the incorrect passwords, you may need to have this resolved by HP or a BIOS company at your own expense.

• The Compaq CQ60-417 DX processor can be replaced.

  Is it possible to replace the core single celeron cpu with a dual core cpu which is similar in mhz?

  The Board of Directors even supports updated. I noticed that the next model is similar with a Dual core cpu inside.

  Thank you.

  Yes the CPU is in a socket and can be replaced. But if the CQ60 is as a prerequisite of models for Celeron motherboard is missing from circuits to support speedstepping on the Core 2 Duo.

• reader of card SIM on HP probook 4525 s?

  Hello

  I have a silly question. I want to confirm if it is or is not a reader of card sim on the laptop HP 4525 s, I see a multimedia card on the side slot front left of the computer, but I don't know if 'media card' means that it will take and read a sim card.     I suspect that the answer is no, but wanted to check before I go buy a player.

  Thank you!

  Timsan55

  Hello

  You are welcome.

• HP ProBook 4525 s impossible to restore or repair HELP

  I know I should have the handy drive, but cannot locate the disk installation or recovery disk.  Is there a way to do a factory reset with them?  I tried to run the function of factory reset, but it is askling for discs.  Argh... I'm sorry. frustrated I uninstall a program and in some sort the installer of windows has been removed.  Now can not install or uninstall anything, can not get on internet or restore.   Thanks in advance for your help.

  Thanks I tried. I found the solution on the HP website. I went F 11 before start up and did a restore of the system from this menu and it did take back me to factory thank you card

• Ethernet card Question (HP Probook 4525 s XT950UT) Windows 7

  Hello

  I am in College in the fall and my dorm has ports ethernet for internet usage. I did some research and found that I need to have an ethernet card installed to connect my laptop with an ethernet port. I have a port on my laptop, but I couldn't find the ethernet card in the--> network adapters Device Manager. I don't have Bluetooth (Personal Area Network), Bluetooth (RFCPMM TDI Protocol), Broadcom and Wifi Miniport to adapt. How will I know if I have an installed ethernet card and if I did, how I install one?

  Hello:

  Your laptop has a setting in the BIOS called LAN Power Save.

  When you are not connected to the a/c power and your laptop is not connected with an ethernet cable, your wired network card appears not in Device Manager, as it has been disabled in the BIOS to save batteries.

  You can connect a cable to the ethernet port on your and your wired adapter should come to life. If it isn't and you intend to have your laptop connected to the a/c power, when connected via the ethernet cable, just go into the BIOS and disable the LAN Power Save setting, and your wired adapter will always be present and available in the nursery of dev.

  Another common parameter in professional laptops from HP's BIOS is the LAN/WLAN, commissioning. When you connect to a wireless network, your wireless card automatically by turns and visa versa.

  If you don't want that to happen either, then disable the setting.

  Paul

• My touchpad for HP Probook 4525 s does not work and I am locked, I don't even have a password!

  I'm not really sure what's going on.  During the implementation of windows, there is a picture of this mouse pad with a slash through it, which appears low, then disappears.  I am unable to move my pointer at all.  I didn't add or remove anything.  I know enough to get me into trouble, so maby someone can help me out there.  Also when I view Windows, it tells me that I am locked out and I don't even have a password.

  Plug a standard USB mouse. It's as simple as that...

• Hi, I have this problem: cooler of my probook 4525 s is very strong and working constantly.

  It starts about 10 seconds after the ignition. Is - this normal - the Task Manager shows 0-10% CPU memory about 27%. The laptop is 3 months old, and he did not this loud before cooling. It started about a week there to see something being hotter (period of spring-summer\ in Bulgaria)?

  I appreciate any answer on the subject.

  Concerning

  I asked a member of the HP Forum if there is a list of compatibility of laptops. I am not sure this will make your laptop run more silent. Have you checked the BIOS updates to see if there is one that deals specifically with the problems of cooling?

  What operating system is installed?

  Best regards
  ERICO

• How to set the sensitivity of the touchpad on my probook 4525 s?

  My jumps to cursor in all directions, making me retype things repeatedly.

  I recommend that you go to the web for your laptop support portal and install the latest version of the Synaptics touchpad driver that corresponds to your operating system.

  Greetings from Brest,

  ERICO