HP ProBook 4525 s impossible to restore or repair HELP

Similar Questions

• HP ProBook 4525 s will not be under tension

  • Name of the product and the operating system:

  HP ProBook 4525; 12.1, 64-bit OpenSuse with the latest updates

  • Description of the problem:

  Laptop will power not at all, as if there is no power pluged - in. No lights turn on either.

  I tried reset hard several times - I even re-installed the battery CMOS with no effect.

  The problems started when the laptop suddenly stopped just as I started a certain PC game. After that the monitor is not

  production of image more, even if the laptop perfectly worked fine when it was pluged in to an external monitor.

  Knowing that I decided to buy a new monitor to see if it is the source of my problems.

  But ever since I have pluged in the new monitor to the laptop will not react to something else - as if no power is present. Some noise may be heard if I leave the battery pluged (I suspest just battery) but it disappears as soon as I plug the laptop to the power adapter.

  Any help would be much appreciated!

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/ .
  
  
  
  I hope this helps.

• HP Probook s 4525: HP Probook 4525 s memory clock

  Hi guys.

  Recently, I did a upgrade to my Probook 4525 s. I decided to add an another ram 4 GB 1333 MHz PC3 - 10600 module for an existing (Samsung M471B5273CH0-CH9). After I did it I discovered that both modules run together @ 1066 MHz and timings base as if only one module is installed in the system.

  So far, I tried to exchange with others 2 independent modules (a samsung and a SKhynix) where both were 1600 MHz PC3-12800 spec but the system still works @ 1066 MHz.

  The data sheet for Probook s 4525 said it supports 1066 MHz and 1333 MHz. But it never works at 1333 MHz. With the module specd 1333 or 1600 specd.

  Any thoughts on this topic?

  Mine is running CPU AMD Phenom II P960 with AMD HD5470 graphics processor dedicated.

  Hello:

  This link indicates that the processor will only work the memory at 1066 MHz.

  You can install the compatible memory back (1600 or 1333 MHz), but it will only work at 1066 MHz.

  http://www.CPU-world.com/CPUs/K10/AMD-Phenom%20II%20Quad-core%20Mobile%20P960%20-%20HMP960SGR42GM.html

  Memory controller

  The number of controllers: 1 Memory channels: 2 Supported memory: DDR3-1066, DDR3L-1066 Maximum memory bandwidth (GB/s): 17.1

• Impossible to restore the connection to a network drive

  I had to do a fresh install of XP Pro on a CPU in my network.  The server is windows 2000.

  I see the drive (H) network of the central unit, but I am unable to connect.
  I received an error message on impossible to restore the connection.
  I'm not sure what other details that I would need to provide the Forum to ask for the help that I need.
  Any suggestions?

  Check the permissions of the user against the share (network drive).

  Delete the drive mapping, and then try again.

• How to disable the touchpad on Probook 4525 s permanently?

  How to disable the touchpad on Probook 4525 s permanently?  Can I uninstall the driver in Control Panel, but the next time, he is back on again once.  I use a usb mouse and touchpad is simply in the way when I type.

  Damy salvation!

  There are a few options depending on your OS and your version of TouchPad.

  • The best option, if it should be available for you is:

  New drivers (at least the V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  Here's a 16.2.X TouchPad driver for the ProBook series - it can run on your laptop:

  sp58647 Synpatics V.16.2.10.12

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Another method that may work with a driver older if the best option isn't available:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Turn off the TouchPad.

  Close

  Ok

  
  NOTE if this alternative is available, it is very well, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ===================================================================================

  I hope this helps!

• PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  PL z help us, I got this error code hr0x80040001, when I install the new version of Msn 11, so I came back again to msn 9, but its impossible to install, pl z help

  Is this the same computer (Windows XP?) as in that previous thread of yours? -Online http://answers.microsoft.com/en-us/windowslive/forum/messenger-signin/cant-sing-to-messneger/23775604-86f9-4bd0-8de8-cc39f10df40b

  ~~~~~~~~~~~~

  Related resources can include:

  MSN Solution Center
  (Registration required; Subscribers of MSN Premium only!)
  http://answers.MSN.com/

  How to contact MSN customer service
  http://support.Microsoft.com/kb/940784

• My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  My Windows Vist shows error 8024402f update code, impossible to update windows. Help, please.

  Hi you can try the following...

  Click on Start >
  Type in CMD > 
  Right-click on the result, and then click on run as administrator >
  Then type sfc/scannow , and then press ENTER.
  Reboot your PC and try it a few times.

  Download and install the update tool of the system for Vista (Windows Update hotfix)

  • Updated preparation system tool for Windows Vista (KB947821) [February 2012] 32-bit
  • System Update tool for Windows Vista for x 64 based systems (KB947821) [February 2012] 64-bit
  "This tool is being offered because an inconsistency was found in the maintenance shop windows which can prevent the installation of future updates and service packs software."

  Microsoft technical support suggestions:

  Configure the connection to obtain an IP address automatically

  1. Click on «Start», enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  2. Right-click on the network connection, and then click "Properties". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Click Select "IP Version 6 (TCP/IPv6)" and then click "Properties".
  4. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  5. Click on 'OK '.
  6. Click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  7. Check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  8. Click on 'OK '.
  9. Restart the computer.

  Other Solutions for error 8024402F

  You can view these articles the Microsoft KB to fix the problem:

  • You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  • Code error Windows Update 80244016, 8024402f, or c80003fa
  • or see this thread

• the cant restore or repair... suck installin updated... and then restarts... on n on

  Yes, I couldn't do the restore points, repair does not wrk then aftr every error found in the registry, do not restore... so basically it loads to the bridge where itsys configuring updates stage 3 of 3 0% done... then restart... more n... all options? or helplz... Thank you

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  This is the recovery and repair of Vista Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Adobe Acrobat 9 Pro is compatible with Windows 10? Adobe recognizes no longer scanning for my printer/scanner driver? Almost impossible to find answers and help!

  Adobe Acrobat 9 Pro is compatible with Windows 10? Adobe recognizes no longer scanning for my printer/scanner driver? Almost impossible to find answers and help!

  Hi leighh50950915,

  DC XI & Acrobat Acrobat has been tested successfully on Windows 10.

  Other versions may or may not work, difficult to predict behavior.

  However, try to uninstall & reinstall the printer drivers.

  Also make sure that Acrobat 9 is updated.

  Kind regards

  Nicos

• Bookmarks suddenly disappeard from one of my computers, impossible to restore on the other.

  I am running Firefox 15.0.1 on Windows 7. This afternoon, all my favorites and history (including the contents of the bookmarks toolbar) suddenly disappeared while Firefox is running. I restarted Firefox and restarted my computer. My modules are all there and I confirmed that I have only one profile.

  The bookmark in the profile backup files are all empty (files not empty, but no bookmarks), and I went to my backup system and confirmed that they have been so at least since the end of August. (I have a * lot * of bookmarks.) I have several other computers synced to this account (which is shown as connected), and at least the two I checked (a desk, an Android) have all bookmarks. But when I created a manual backup on another office and tried to restore from it, I said 'Impossible to treat the backup file. In addition, the synchronization status bar says "Sync has encountered an error during synchronization: unknown error.»

  Any ideas?

  I think the only way to recover from this is to delete the places.sqlite file or move the file to another folder or rename the file as a test (places.sqlite.sav) to force Firefox to create a new file.
  
  There will be no problem with restoring a JSON backup unless the file is really corrupted.

  • Bookmarks > show all bookmarks > import and backup > restore > choose file
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• S processor ProBook 4525 replacement

  If a good want to advise me on the best processor should I use to replace a death on a 4525 probook s

  Here is a link to the service manual for your laptop:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02791389-1.PDF

  This list of the processor that are compatible with your system, you will see on the product description page. A little further in the manual, it gives also a tear complete procedures to remove and replace the processor.

  A word of warning, for the processor in a laptop can be a time-consuming task and difficult. You know for sure that it is the processor that went wrong? There could be a number of other things that could trigger an operating system that would be more likely than the processor.

  If you are keen to go ahead with the repair yourself, you can use the HP numbers listed in the Guide Search Ebay or similar place to get an idea of the cost of buying a new processor.

  Hope this helps, let me know if there is anything else I can help with that.

• Frequent crashes and impossible to restore

  IPod has been crashing and restarting frequently (5 - 10 times per day) now with the new update, I get an error message and I see the same error message when you attempt to restore (error code 4013).

  Does anyone know all the potential solutions that do not require to pay me anything / send to Apple?

  Hi Cwatk003!

  I see that you get an error message on your iPod when you try to restore your iPod is reboot and crashing frequently.  I know it's important to have your iPod working properly, so I'm happy to help you.  Please fill all the troubleshooting steps in the following to see if you can fix this problem yourself.

  If you see an error when you update or restore your iPhone, iPad, or iPod

  If you see errors 9, 4005, 4013, 4014, when you restore your iOS device or

  Thank you for using communities of Apple Support.

  See you soon!

• URL bar autocomplete works not, renamed file: places.sqlite, now impossible to restore or import bookmarks

  AutoComplete in the bar of my url suddenly stopped working. I use Firefox on a Mac with OS 10.10.5 43.0. First of all, I checked that AutoComplete is enabled in the preferences, "refreshed" Firefox and install a new copy. When none of that worked, I changed the name of the places.sqlite file in my folder of profile, as shown in this thread: https://support.mozilla.org/en-US/questions/951168. It worked and now the url bar autocompletes; Hooray!

  But now my favorites are gone! I supported manually to the top of my favorites in advance, as .html and .json, but when I try to restore/import my favorites of these files, it does not work: I find myself with a bunch of empty folders. Help?

  If you open the HTML export file in a Firefox tab as a web page, should your bookmarks? In other words, is this a problem of import, or was it a problem of export?

• Time Machine impossible to restore backups

  Hello

  I had to restore my entire machine (because I am stupid) and when I went to access my Visual readers of Parallels, missing 2. It seems they were always absent (I went back I can. I'm not saying TM to ignore readers, and I see no reason why they have not been backed up. Any ideas. I was so very loud already.

  Andrew

  Your virtual machines in Parallels settings contains an option "do not backup of virtual machine..." http://KB.parallels.com/en/8827

• iPhone 6 Plus with IOS9 impossible to restore back to the top with iTunes on Windows Vista 12.1.2. 5 years of data lost?

  Hi guys

  I was really grateful for any help on this, I am really at my wits end.

  So my iPhone 6 more than 128 GB camera packed a few days ago. I made an appointment to repair/replace the Genius Bar and prior to the appointment back up everything on my phone to itunes on my Windows Vista laptop. All 100 + GB of it. I will mention at this stage, nothing has been saved to icloud (silly me!)

  Apple is good enough to replace my iPhone as it was still under warranty. I plugged my new iPhone forward to my laptop to restore to the last backup, in order to receive a message in order to synchronize with the iPhone I have to update iTunes to the latest version. No problem, I thought. I checked for the last download iTunes to receive a message that iTunes is up to date... At this point, I started to panic. So I tried to download the latest version of iTunes from Apple website only to be told that iTunes 12.3 works only with Windows 7 or later... AAAHHHHHHH!

  I literally my life on this phone. 5 years worth of data just gone. I can't downgrade the IOS on the phone, and I can't update iTunes on my laptop.

  Is there any fine people out there with a solution to this?

  Thank you in advance.

  Mark

  Brand...

  I hate to be the bearer of bad news, but the minimum requirement is Windows 7 and iTunes 12.3.3...

  See: system requirements here > http://www.apple.com/lae/iphone-6/specs/