S - the keyboard has failed?

Similar Questions

• the application has failed to start because its side by side configuration is incorrect

  I downloaded the new firefox and when I try to open it I get this message that the application has failed to start because its side by side configuration is incorrect

  Seems to be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side).
  
  You can try to use the sxstrace tool to see if you can find which files are missing or damaged.

  • http://www.Vistax64.com/software/245768-side-side-configuration-incorrect.html

• The keyboard has fallen - how can it be fixed back?

  I have a portable Satellite A50-108. The letter 'k' has lost its keyboard.
  Is it possible to stick on and if so what kind of glue would you recommend?

  The keyboard has 4 small farmers at the bottom, and these licensees must be connected to the key mechanism. If they are broken, there is nothing you can do about it.

  With glue is not good solution and all this you can do with glue is to make the whole key unusable.
  It will not work.
  To verify if the smallholders are ok and replace the CAP key in the right position and push gently downwards.
  You'll hear the clicking noise and the key CAP should be just in place.

• the application has failed to start because its side-by-side configuration is incorrect for windows live messenger

  Wen I Conect live windows Messenger tray I have this massege and I can't conect to the programe

  the application has failed to start because its side-by-side configuration is incorrect

  Hello Pecky,

  Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live Solution Center Messenger Portal community. Please visit the link below to find a community that will support what ask you:

  http://windowslivehelp.com/product.aspx?ProductID=2

  Thank you

• I am able to receive emails, when you send emails I get the following message: the connection to the server has failed.

  When sending emails, I get follow-up messages:

  The connection to the server has failed.

  Object "try again"
  Server: 'smtp.comcast.net '.
  Windows Live Mail error ID: 0x800CCC0E
  Protocol: SMTP
  Port: 25
  Secure (SSL): Yes
  Socket error: 10013

  Comcast e-mail settings (note the reference to port 25)

  http://forums.Comcast.com/T5/E-mail-and-Xfinity-connect-help/E-mail-client-settings-customer-generated/TD-p/778889

• Windows XP Outlook Express 6... the connection to the server has failed.

  I have Windows XP. When you attempt to send emails from my Outlook Express 6, I get this message...

  The connection to the server has failed.

  Account: 'pop3.live.com '.

  Server: 'smtp.live.com '.

  Protocol: SMTP

  Port: 25, secure (SSL): Yes

  Socket error: 10013

  Error number: 0x800CCCOE

  Probably your ISP blocks port 25 for access to the SMTP servers other than their own. Go to tools > accounts > {account} > properties > advanced. Change the port to 587 and try again.

• logon error: Hphmon06.exe could not be located. the application has failed to start because hpzjrd01.dll is not found.

  Original title : I get... suite msg on logon: Hphmon06.exe not found in windows xp.  the application has failed to start because hpzjrd01.dll be found.

  Someone else already has this nagging and ongoing problem?  How to solve this?

  glenkelly,

  If you are just wanting to get rid of the annoying popup, try the following steps:

  -Click on the Start button
  -Click on run...
  -In the "Run" dialog box... ", type: msconfig
  -It will jump to the top of the window "System Configuration"
  -In the window "System Configuration", select the tab "start".
  -In the first column (startup item), Ahmed to the bottom of the list and search for "Hphmon06.exe."
  -(Ex: «Startup Item»---«Hphmon06»)
  -If you are unable to locate this name, expand the column "order."
  -In respect of the 'Command' column, scroll down and look for the path 'Hphmon06.exe '.
  -(Ex: «Command»---«C:\Program Files\Fichiers Files\HP\hphmon06.exe»)
  -Uncheck the question to the left of the box, and then click 'OK '.
  -More than likely, a box will appear asking if you want to "Reboot now" or "restart later".
  -Click "Restart now" and see if the popup box boring will disappear when you connect!

  -Riley

• My outlook express has stopped working and I get this error message, "the connection to the server has failed..." »

  My outlook express no longer works and I get this error: the connection to the server has failed. Account: 'pop-server', server: 'pop-server', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E. Can someone tell what to do?

  Make sure that you can access your e-mail via webmail, if you have this option to ensure that it is not a problem on the server.  Then locate the antivirus interference and ensure that the analysis of the electronic mail is disabled (see www.oehelp.com/OETips.aspx#3).  Try to remove your e-mail account and then close OE and then add it back again and then see if it works.

  Steve

• Outlook express has just stopped working error: the connection to the server has failed. Error number: 0x800CCC0E

  Original title: outlook express just stopped working

  The connection to the server has failed. Account: 'sale', server: 'mail.thornroofing.com.au', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10013, error number: 0x800CCC0E

  the message it gives, have disabled norton e-mail analysis?

  the message it gives, have disabled norton e-mail analysis?

  
   
  Try a test message with Norton shuts down completely. If it works, remove Norton and do a custom Setup, opting out e-mail Scanner when it is offered. Sometimes just turn off is not enough.

• I get an error message in Outlook Express when you try to send, transmit, or respond to any e-mail: "the connection to the server has failed."

  original title: Outlook Express

  The connection to the server has failed. Account: 'pop.4wbi.com', server: 'mail.4wbi.com', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10060, error number: 0x800CCC0E is what I get every time I try to send, transmit, or answer

  I have outlook Express 6, Windows XP, I would appreciate any help you can give me

  I don't know what I was supposed to check on the Forum, Feedback & product

  Thank you, Karen

  At first glance, it seems that a few things wrong with the settings you have for a server outgoing (SMTP). I think that Westphalia broadband uses mail.4wbi.net as the incoming and outgoing mail server, not pop.4wbi.com (note mail instead of pop ) and .net instead of .com. These are the servers listed in this article:

  Configuration of Westphalia Broadband Inc. computer Internet
  I'm not ensure that these settings are correct. Rather I suggest to find the page to set up your own mail server and use the parameters described in this.
   

• Outlook Express 6 errors - the connection to the server has failed... Error number: 0x800CCC0E

  Why do I get this error? The connection to the server has failed. Account: ' / / / .org ', server: ' / / / .org ', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E how can I enter the POP3 and SMTP?
  I use Internet Explorer 6, windows 2000 Professional

  Socket error: 10060, error number: 0x800CCC0E how can I enter the POP3 and SMTP?

  Hello

  Your ISP, who runs the mail server, can provide port numbers and other settings. Pages of help/support of the ISP may have this information easily accessible.

  The other common cause of error 0 x 800 is safety programs - an antivirus program scans incoming or outgoing e-mail, or a Firewall interferes with authentication.

  Hope this helps,
  Don

• Windows Mail error - error number: 0x800CCC0E - "the connection to the server has failed..." »

  From: bbell121

  I have, I've been making the mistake of another email on another connection on below = the same PC configuration SMTP and POP3 works on another PC but when I try the frame to the top of the same bet on the same PC I have two connections I get this
  message;

  The connection to the server has failed. Account: 'Colleen', server: 'xxxxxxxx.yourwebhosting.com', Protocol: POP3, Port: 110, secure (SSL): no, Socket error: 10061, error number: 0x800CCC0E

  I readt through this channel and have tried most of the things listed I have Norton System works 2009 I tried it is installed and uninstalled as well.

  I'm running out of ideas?

  I tried port 25 (which works on another PC) but on this one it is not.
  I tried the 587 port not working either.

  anyhelp would be greatly appreciated

   

  De : Gary van

  I guess that your problem is with the reception, because the error message you have provided relates to the reception.
  Ports 25 and 587 do not affect receive it, because they are for the shipment.

  The error message is difficult to assess because you x'd, one part of the name of the server. Perhaps the error is in the part "xxxxxxxx" to the name of the server.
  --
  Gary van, MS - MVP (Mail)

  Another response of the community of Windows Vista discussion groups

• The application has failed to start because Qtcore4.dll not found. So Daemonprocess.exe has a stop

  I use a vista laptop (32-bit OS) window when I log in, these messages, "the application has failed to start because Qtcore4.dll not found."  And so Daemonprocess.exe has a stop. Hope u could help me solve this problem. Thank you.

  Gary Goh

  Goh Hey! I had the same problem.  It is caused by moboengine software.  This has happened with me after you have uninstalled it.

  Navigate to C:\program files (x 86) \moboengine and remove this directory, make sure that you have killed the daemonprocess.exe execution program in your first task manager ;)

• Problems sending/receiving mail - error number: 0x800CCC0E - "the connection to the server has failed..." »

  De : Briangie

  I've been out of town for a few days. I was using a public Wi - Fi connection to my laptop. The first part of the week worked fine, but now using the same wireless connection, I receive the following error message. Has happened since yesterday afternoon 03/10/08 and today is 05/10/08. What is the problem? Help, please!

  The connection to the server has failed. Account: 'mail.charter.net', server: 'mail.charter.net', Protocol: POP3, Port: 995, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E

  From: Gary van

  In Windows Mail, go to the tolls, accounts, select the account mail.charter.net, properties, advanced. Change the port number for the incoming (POP3) server from 995 to 110. Make sure that the adjacent SSL option is not checked. Click OK.

  As a general rule, the owner of the SMTP server must be the same that provides your Internet connection at the moment.

  The workarounds available when sending abroad are the following:

  1. use webmail to send (via your browser).
  2. ask your ISP if they have one port other than '25' for SMTP. I do not think that
  Charter of fact. Cable companies are very difficult to accommodate travellers.
  3. If you frequently use the same connection away from home, replace the SMTP Protocol
  Server in this respect. It's a little tricky, but if you want to go this route.
  I can provide more details.
  4. If you frequently send to multiple locations, get a free Gmail account,
  Configure it to POP access and use for your shipment of household chores.
  Gmail uses port 465 for SMTP, which is not blocked as is port 25.

  
  Another response of the community of Windows Vista discussion groups

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.