AT100 does not connect to my windows XP PC

Similar Questions

• A6210 adapter does not connect on 5G (Windows 7)

  I would be very grateful for any help on this problem. I have an I7 computer running on Windows 7 with a Netgear A6210 wi - fi adapter and a modem router Netgear D7000. The router is new and seems to be working on various appliances on 2.4 & 5 GB. The adapter is older and works brilliantly on 2.4, but has all sorts of problems to 5 GB. He also had problems on 5 GB on a previous Netgear modem.

  Most of the time he appears to connect at a good speed (867 MB) but most often fails to get an internet connection. In practice, I'm not sure it connects in fact since I have difficulties to access the router or my SIN cable on the router. In my view, there are occasions when I got the internet on 5 GB, but I played with it so long, I'm not sure.

  I installed the latest driver for windows for the adapter (vsn 5.1.22.0) and it made no difference. When I use windows diagnostics considers what it takes to reset the adapter - but even after doing it still does not connect to the internet. Change to 2.4 GB connects quickly and works every time. NETGEAR genius tells me he's working on channels 9 & 13 to 3 bar strength and about 300 MB/s on 2.4 GB and channel 36-48 to 5 GB with a force of 4 bars and 867 MB / s.

  I would be very grateful for all suggestions finding a way forward. I have no hair left to pull and closer me logging of all products netgear in the trash!

  James,

  Thanks for your reply. In fact, I tried what you suggested, but it has not solved the problem.

  However the problem has since been resolved by going into the modem and changing channels 5G of the numbers (36-42) low to high (100-112). This seems to have solved the problem with the A6210 adapter that connects now on 5G without problem and still works with other devices.

  Interestingly, the two laptops were 5 G connection without problem from the same location as the card and are still. So I have no idea why this change has worked-, but he did.

  Thanks for your help

  Alan

• With PFS disabled or active, it still does not connect while using Windows 7.

  With PFS disabled or enabled, it still does not connect. Is this a common problem with Windows 7 for the IP Sec gateway to gateway VPN connections and/or does anyone know how to get this working?

  Hello

  For assistance on this issue, you can post your question in Windows 7 IT Pro Technet Forums.

  Network Windows 7

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• My Sansa MP3 player does not connect to the Windows Media Player.

  I connected several times using the same wires.  This time THAT WMP says "connect a device" in the upper right corner.  This is probably an easy fix.  Any suggestions?  Thank you.

  Hi Larry O would be,.

  You are able to open content in Sansa?

  Method 1:

  Run Windows Media Player troubleshooting utility library:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  Open Windows Media Player, press the Alt key, check if the device is listed under Tools > options > devices. "Refresh list".

  If not listed parameters run 'Windows Media Player' convenience store and check the status.

  Open the troubleshooter in the Windows Media Player settings.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Hope the above information is helpful.

• My windows 8 pro machine does not connect to my windows 7 pro machine

  I connect via a LAN domain.  The computer of windows 7 can connect to the windows machine 8, but not vice verse.  I activated the TCP/IP Protocol and sharing.  What Miss me?

  Hi James,

  Since the computer is on a domain environment please post your question here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro

  Please let us know if you have any concerns on Windows.

• My (HP Officejet 4500 n - z G510) does not connect to my Windows Vista laptop

  Ive had problems connecting my printer to my laptop. Ive downloaded the software complete on the site and even restore my computer settings. The printer connects to the Wifi and everything, but when I try to add a printer to my network I get an error message. Ive tried to download the full software version 3 times and I still can't make it work. What I am doing wrong?

  In addition, the printer can be connected to our counter top, but we got rid of that one, so we no longer have the CD.

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

  Add the printer in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• My Sansa MP3 player does not connect to the Windows Media Player, I have several of them and all but 1 do not connect to Media Player

  I used the same cable on other sansa and it works very well.  It is a 4 GB player, I see if I go to my computer. Thanks for any help.

  Hi SteveBrooks,

  1. were you able to use the drive before with no problems?

  2 you get messages or error codes when you try to synchronize?

  Given that the drive is detected by the computer, you can check if the sync settings are correct in Windows media player.

  Set up a device to sync in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  For more information, please visit the links below

  Windows Media Player sync: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Media-Player-sync-frequently-asked-questions

  You can also view the following support Sansa link and check if it helps:

  Sansa player not recognized by the computer

  http://KB.SanDisk.com/app/answers/detail/A_ID/42/~/Sansa-player-not-recognized-by-the-computer

  Hope this information is useful.

• HP Deskjet 1510: My HP Deskjet 1510 does not connect with my Windows 10 PC

  Some help would be really appreciated. 

  Sorry, I suggest that call you HP on the phone now.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well

• I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

  I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

  Thank you

  To work with iOS 9.2, you must update iTunes to 12.4 v.

• Laptop with Windows XP pro does not connect to the home network. Has been fine with the Linksys router. Updated Netgear router again and now will not work.

  Improved the old Linksys G series to new router Netgear N600 - now can't connect wireless or directly with the ethernet cable. Status shows: "acquiring network address" or "little or no conectivity.  Worked through all the options of repairing typical network with no luck.  Also reset router, I tried direct cable modem & shows 'connected icon' but still does not connect to IE.  Another new computer with Windows 7 works great on this network.  What is my next step to repair?

  Use a static IP address and see what happens.

  How can I configure my static IP address?
  http://ask-Leo.com/how_do_i_configure_my_static_ip_address.html

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• I just installed a new router and now my desktop running Windows XP computer does not connect to the internet.

  Hello

  I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.
  Any suggestions?
  original title: connectivity Limeted

  The zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.

  Your messages are a bit terse, but if I understand correctly

  • You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
  • All but one of these computers can reach successfully from the Internet via the router.
  • A computer that can't browse the Internet is connected to the router via an Ethernet cable.
  • You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
  • You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
  • You have installed Windows XP Service Pack 3 (or at least Service Pack 2)

  Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type the following lines and press ENTER after each line

  Netsh reset winsock catalog
  netsh int ip reset c:\resetlog.txt

  Close the command prompt window and restart the computer.

• My PC does not connect to the Internet, a window opens and says DNS server does not respond.

  Original title: programs network networking Internet site Internet Site Web Web Site URL of the network

  My PC does not connect to the internet, a window opens and says DNS server does not respond.

  Hello

  Follow the steps in the article mentioned below and check if it solves the problem:
  http://support.Microsoft.com/kb/314095

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect.

  I have a new router and the computer windows 7 If using WAP wireless encriptación. I also want to use my old laptop which has XP then does not connect. I was told by the router (Belkin) manufacturer support there is a MS download XP patch so it will connect to my new wireless network. Where can I get it and what it is labeled?

  original title: wap encriptación

  Hello

  Maybe this can help.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3914