S10 HDD died, pick up the new HARD drive failed?

Similar Questions

• Portege Z830 - where can I get the new HARD drive

  Hello

  I have problem with my toshiba portege z830 ultrabook.
  My HARD drive died, and I don't know where I can get the new HARD drive.

  I've got guaranteed but I am forgotten registered my cell phone before when I went for repairs not authorized, because my first problem was with the motherboard.

  This motherboard has been replaced for new ones.
  If my warranty is maybe cancelled.

  Well, that's my problem to another.

  What should I do?
  Please help me. I am available to do anything.

  Hello

  I think that you should first check if your warranty is still valid.
  This can be checked on Toshiba Unitdetails page:
  http://APS2.toshiba-tro.de/unitdetails/

  Where the warranty is valid, get in touch with maintainer authorized Toshiba in your country for replacement.

  But as far as I know the Portege Z830 was equipped with an mSATA SSD drive.
  This means that the laptop doesn't support HDD 2.5 common but requires special mSATA SSD drive module.

  In case your warranty is not valid, you will pay for a new mSATA module.
  Replacement should do a service provider authorized Toshiba as well because this replacement is a little tricky on this model of laptop.

• Need help to install the new hard drive in Satellite Pro M10

  Hi all

  My hard drive died in my M10 Pro Satellite so I decided to adapt to another.
  It fits very well in the caddy, but just does not want to slot into place correctly as something seems to be stopped.
  The M10 only accepts a certain brand/model?
  Also, nobody knows this as the largest capacity M10 will accept?
  Thank you very much.

  Concerning
  J

  As much as I know should not be problem at all. Take the old and the new HARD drive and compare the connectors. I hope that they are the same. I can only imagine that the new HD is not placed correctly in the HARD drive bracket. Make sure that the new is placed as an old man after his retirement from the laptop.

  As for max capacity of HARD drive, there is no precise information and we can only speculate on this. Try to use the search option on this forum. Maybe someone already talked to upgrade the HDD on Sam/Satellite Pro M10.

  The fact is that Satellite Pro comes with 30, 40 and 60 GB hard drives. How many GB does your new HARD drive?

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Satellite C650 - reinstall with the new hard drive

  Hello

  The hard drive in my C650 just died so I put in a replacement, and the problem I have is that I never create a recovery disc for my laptop.

  I tried to use the windows disk 7 I got with my desktop, but when I boot it I get the error ' A required CD/DVD drive driver is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".

  So, I downloaded the driver for chipset support page and excerpts to a flash drive. The installation detects these drivers "ICH9" on my USB, but after loading them, I always get an error ' no new deices could be found. Make sure that the driver files are correct and located on the driver installation media. ».

  I checked the bios and the new hard drive is detected without a doubt.
  Is there anything else I can do, short of ordering toshiba recovery disks?

  Thank you!

  Hello

  The message
  > ' Required the reader driver CD/DVD is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".
  say that your CD/DVD drive is not detected.
  So you need to check if the BIOS so the CD/DVD drive is listed. It should appear on the first page of the BIOS.

  If you want to boot from the disk and then switch on and you press F12.
  Usually, a menu should appear that allows you to choose the ODD (CD/DVD)
  Choose this option and try to boot from the CD.

• Portege 3500: OS crashes after the new HARD drive update

  I have a problem with the new hard drive - Seagate Momentus 100 GB 7200 rpm, ATA - and...
  instalator blue screen starts normally (from recovery CD or OEM CD) and when partitioning is startis - system is stopped...

  HARD drive is ok - tested on another laptop
  Laptop is ok? instalator and works windows, tested on 2 HDD (40 and 60 GB, two IBM)

  It is possible, that this new hard drive is not compatybille with this laptop?

  Please help, because it's my boss laptop :(

  P.S. - sorry for peut English

  Hello

  Are you sure that the HARD drive is recognized correctly in the BIOS?
  Seems that the laptop does not support the new drive (100 GB, 7200 RPM).

  Perhaps because of the large size of HARD drive and the fast rotation value.
  I would try to use a 60GB 5400 RPM a 80 GB HARD drive maybe works but it seems that the 100 GB HARD drive is not compatible

• Re: Satellite C50D-A-11 q - how to get key WIn8 and use it on the new HARD drive?

  Hello

  hard drive died in my laptop. How do I get my key Windows 8 so I can install the new hard drive?

  Thanks in advance

  Stuart
  nessydoo

  Unable to get the key separated from Toshiba, but only the Toshiba recovery disc.

  If you have not created the Toshiba recovery disc in the past, then you will need to order this disc from here: http://backupmedia.toshiba.eu/landing.aspx

  The disc contains the image. Image is a package that contains the (already activated) Windows system and all Toshiba drivers and tools.

• HP 6310y can't get the new hard drive to load windows 7

  model 6310y - Windows 7 Home premium 64-bit

  My desktop PC has stopped working.  I took it to the local computer store and they said it was the HD.  I bought the new hard drive and tried to install the retail of Windows 7 home premium 64-bit OS.  I got an error Code 0 x 80070002.

  I called HP support... told me that I needed their brand of recovery disks because the motherboard or BIOS would not allow me to install Windows 7 on new replacement HD disks without having their (HP).  So I ordered their... $17

  I bought another new HD and tried to install Windows 7 OS with HP recovery disks.  This time got the 0xe0ef000e error Code.

  I have to mention every time trying to install OS on new replacement HD... He got about 8 to 12 minute installation before receiving error messages.

  I called HP support... this time said that the retail version of Windows 7 OS must have worked and that I didn't need the HP recovery discs brand new replacement HD installation.   They offered me to pay $199 and send my office to fix inclusive it... all.

  Very confused.  I never had something like this before... I had several hard drives die over the years and have replaced the myself and installed all of the software including myself OS without any problem like this.

  Memory retrieves okay when using the diagnostic f9 key... She showed problems with HD during one of my many attempts of diagnostics

  Not sure if it's a bad mother or the video card integrated... do not know how to find either... since I can not the PC market

  It will start at Blue HP screen & most of the time allow me to enter in the screens f9, f10 or ESC.

  Don't know if its worth paying $200 to fix this or go and buy a new one for about the same price.

  any suggestion or help is appreciated

  Thank you

  I had to send it back to HP.  It is a bad motherboard.  They dropped the price a bit to replace the motherboard.  I don't remember how much they charged me.   I'm guessing around $200 - $300

• recovery disc will work with the new hard drive

  I have a HP Pavilion dm4. My hard drive died so I installed a new hard drive. The original operating system installed on the computer is Windows 7. I don't have a Windows 7 disc with the computer. If I order the Windows 7 HP recovery disk, it will install Windows 7 on my new hard drive? I got the info from COA. Thanks for any help you can provide.

  If the new hard drive is having even or a larger size than the old, recovery disks will reinstall the factory OS on your new drive.
  
  Thank you

• Pavilion 15 - p002: HP Pavilion 15-p002 minimized Image Recovery on the new HARD drive. Is this possible?

  The original crashed the HDD on HP Pavilion 15 - p002 and I got a new HARD drive. Because I don't have a copy of the installation disc Windows 8.1 I wonder if execution of Image reduced on the new HARD drive recovery is possible. Help, please.

  Try this link:

  http://support.HP.com/us-en/document/bph07143

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• need to upgrade 250 GB hard drive, how I transferred all my files and xps3 pro for the new hard drive without lsing all this?

  need to upgrade hdd 250 GB how I transferred all of the files and opperatting sys win xp sp3 new disk hard ad not lose any

  Hello

  You cannot transfer the operating system from one hard disk to another. But you can use the backup utility to backup data and restore it on the new hard drive.

  Reference:
  Install, reinstall, or uninstall Windows
  http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/308422
  How to use the backup utility to back up files and folders in Windows XP Home Edition
  http://support.Microsoft.com/kb/320820
  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340

• My HARD drive has failed. Can I transfer an OEM Vista Premium to the new HARD drive?

  I get a message that my HARD drive is "iminent failure" and still works. Can I transfer my OS of Vista OEM (H/P desktop computer) bonus to the new HARD drive? I have the original disks of code and product recovery. If I can, please give directions.
  Thanking you in advance. WC

  Hello

  Yes

  You can change HDDs in the machine even if it's a failure and does not affect your vista license

  posters have reportrd have problems if they used hardware spares no HP

  just thought I would mention that if you encounter problems during reinstallation

  Also discover this way of doing what you want to do

  hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

  Search for information on this subject on their Web site

• My hard drive crashed, I bought a new, and I have the restore disks but it error when you try to load on the new hard drive!

  It wont let me load Vista on the new hard drive

  Hard drive test:
  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• Removed the HARD disk with MBR/BCD who installed Vista x 64 Business on the new HARD drive

  I have vista x 64 business installed on a HARD drive, but it was (and still is) installed on an older HDD aswell and the smallest, the result being that when I removed the old hard drive to put in another computer, I was unable to boot the copy of vista on the new HARD disk as the MBR or the BCD bit that allows me to choose what vista start is on the old HDD. Using the installation DVD I can get up the command prompt and run Bootrec.exe without the old HARD disk installed, which can find the vista installation, but fails to solve the problem. I'm not an expert so I can't properly use Bootrec.exe, and startup recovery also does not work, although it seems to say that something to do with the startup has been fixed. Is it possible that I can get the computer running without the old HDD without having to reinstall vista on the new hard drive? Currently, I put the old HARD return drive to start the new installation of vista.

  When you move an old hard drive to a new computer, the installed operating system will find new hardware (motherboard, etc.).

  A clean install is a normal requirement, as no drivers are installed for the new hardware on the operating system.
  Thus, it will not start.

  How to do a clean install:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• XPS 15 (L502X) - disk HARD death - where can I get the Windows7 DVD to install the new HARD drive?

  Hello
  I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
  Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
  But it doesn't! :-/

  How now to install the new HARD drive on my dell? Anyone?

  BR
  René

  ROFMAN

  If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may charge for the disc.

  If you do not live in the United States, contact the Dell Technical Support which is in your country.

  Bev.