Satellite M45 - does not start after restoration on the new HARD drive

Similar Questions

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• X1Carbon does not start after restoration of the USB

  I have a new X 1 carbon 3443CTO Win8/64. After the configuration and test, I wanted to give it to one of my users so I did a "factory restore" using recovery media created by following the guides posted here and elsewhere:

  Control the media of Panel\Recovery\create etc.

  Went as expected. When I ran the recovery - I have taken a step further and called Lenovo as the step that calls for repartition disks reported ambiguously: 'No' (keep existing partitions) reported that a partition is not found "required" Yes seemed exaggerated. The tech told me to proceed by Yes.

  Once the recovery is complete - the system has rebooted. Restarted in the Boot Manager - I chose HDD0 and was immediately referred to the Boot Manager. I called Lenovo and referred to my existing case and told me; "Well do it all again" I did. Same result.

  So - I have created another USB key from a whole new 3443cto carbon X 1 and ran in recovery - same result.

  I then created another set of recovery on a new USB - same result media.

  When I access training with Advanced\Command prompt the windows directory, program files, etc are all there, but nothing I do (Ran BCD fix mbr etc.) will only boot disk.

  Any ideas?

  Today, I called Lenovo and the only choice that gave me was back which I guess I do.

  Question - is a downgraded supports or has a return Service support has deteriorated since last year?

  Before leaving the office, I decided to repeat the exercise once more. This time, I used USB 3.0 500 GB drive that I created last night. I ran the option "update files". When he finished the system booted Windows 8 However he presented me with an opportunity to enter a name and a password. The previous credentials did not work, nor null credentials and there is no option to create a new account.

  I have re-run recovery, this time choosing to keep partitions and basically do a factory instead of reformatting redefined and.

  Once completed, the system booted Windows 8 and the possibility to choose the country. At that time, I have dagprogramm off the system. I guess it's back to the new factory.

  My hypothesis is that in the course of the original tent to refresh something has gone wrong with the drive and running BCDedit solved the problem? Who knows?

  In any case-problem solved. What worries me is that never once in 3 calls, I did Lenovo has someone at - he tried to help me solve the problem. I am the author of the decision - I choose servers, desktop computers and laptops. We use Dell servers and desktop computers the Thinkpads for laptops.

  Support IF Lenovo has become this bad, I'll start to buy Dell laptops. I think I have to raise my w/Lenovo support.

• Satellite A300 does not start after extinction during the BIOS update

  Hello

  I tried to update the BIOS after reading a TOSHIBA TEMPRO alert, after some time, apparently not run so I ran a second time, then both ask of BIOS appeared in the taskbar only and it froze while I did not start the upgrade or anything like that I had to the power off.

  I tried to restart, but now, it just on the screen stays black (the monitor is not powered, as if the system was not running), all LEDS are powered with flashing 'drive access', the led on the DVD Player keeps flashing making a noise every 3 seconds or more.

  I read on the forum that there may be no solution but to take it to an authorized service provider but I'm willing to take any possible solution before you do.

  Thanks for any advice.

  Alex.

  Hi, mate

  Unfortunately, you need to be reflash the Bios as something that went wrong during the update. You should contact the Asp and ask them to reflash. There is no other way to get your laptop to work.

  Good luck!

• Win XP on Satellite M30X does not start after battery was flat

  XP on M30X will not start after battery was flat! Safe mode, last work... nothing works!
  The restore CD offers 3 options1: new installation, 2 toshiba recovery utility (expert mode) und 9 output.

  How do the XP Recovery console, or how to use 2 to restore the system without losing any files.

  Thanks for the tips.
  It is a nite Mare...

  Wolf
  Good day

  The point is that the Toshiba Recovery CD does not have the Windows XP repair console.
  The restore CD contains the image of Toshiba and you can just reinstall the system on the HARD drive and no repair.

  Now you have 2 options of recovery.
  First called standard recovery option would be to format the entire HARD drive and reinstalling the image.
  The second option called recovery expert allows you to reinstall the operating system on a selected partition. Then only this partition will be formatted.

  If you do not want to format the whole HARD drive then you select the second option and select the partition to a new operating system.

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Virtual machine does not start after restoring from Time Machine to the new Imac

  I got my IMac replaced by Apple, after that they could not fix the old one.  They did a full restore from a Time Machine backup.  The virtual machine does not open now.   When I navigate to the file to try to open the virtual machine at the VMware logo in the bottom right of the icon displayed with large yellow exclamation appears on the icon?  Anyone encountered this problem before.  I'll take the Imac in Saturday if I can not solve.  The machine has the same size as before.  There are a few aspects of sharing with the Mac application miss me?

  According to the MacVirt.vmdk folder, you have the right number of segments of shared disk so you should be able to create a new VM by pointing to the disc in the new VM Wizard by pointing to the MacVirt.vmdk file.

  Note: After you create the new Virtual Machine, I would not suggest the Virtual Machine to stop, pause and close merge and then move all *.vmdk files in the package of the virtual machine, and then manually change the computer configuration files virtual .vmx and change the path to a little to view the MacVirt.vmdk file.  In this way, everything is in one package and is easier to maintain.

• Satellite M200 does not start after the RAM 4 GB upgrade

  Hello

  I recently updated my RAM just to speed things up a bit as RAM is so cheap these days.
  I have a MEAC M200 T2130 Vista with 1 GB sticks (2 * 512).

  The new sticks are 2 * 2 GB Dane - elec DDR2 pc2-5300, when I put the two and restarted the hard drive light came briefly and then it is just options BIOS of Idol, no POST.

  I tried to use a single stick of 512 MB with two new sticks and they both work in a 2.5 GB configuration just not together that also this only works when the stick of 512 is in internal housing and not vice versa.

  So if someone has had a similar prob or can give me some advice that would be great, I'm not sure if the motherboard can support 4 GB?
  Thank you, Dave.

  Hello

  There are two possibilities why your M200 doesn't not start after upgrading RAM.
  First the RAM installed may be not compatible or could be faulty or the computer laptop doesn't support 4 GB of RAM.

  I put t know what M200 do you have exactly, but you can check the installed chipset and could check on the Intel page if this chipset would support 4 GB of RAM.

  Welcome them

• Satellite M50 does not start, go back to the screen with different start modes

  My Satellite M50-130 does not start correctly. When you turn it on, it goes to a black DOS screen, saying: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "It offers me different start modes: Safe Mode, with networking and command prompt. Last good Configuration known; and start Windows normally.

  I tried all the 5 options, gets the commissioning insofar as the Toshiba screen, but then with all the options, it returns to the initial screen offering the 5 modes of starting. Same thing happens when laptop works again.

  The only recent software change, I've done was an update to Norton AntiVirus/Internet Security and I suspect that Norton is at least part of my problem, see history below. I know it's the Toshiba support site, but I tried Norton so many times without success, I gave up. Plus, I'm no expert at all, so I can't be sure that it is really the source of all my sorrows. All advice welcome!

  The performance of my laptop has deteriorated seriously in the last two months. She is extremely slow, and cleaning of malware and unwanted General does not help. It began right after that I renewed the license of Norton last year and upgraded to the 2007 version. The worst downturns are always connected to direct upcoming Norton upgrade programs. I disabled the live upgrade, but programs always come to the top, and I can't stop them, a popup tells me that they are protected.

  Wireless internet is also very capricious, even if another computer on the same network works fine.
  During the last week, I had to relax a little internet security settings (from "moderate to severe" to "low to medium") because after an other update of Norton AntiVirus, I couldn't access to interactive Web sites.
  It is perhaps a coincidence because Norton AntiVirus comes with updates at least twice a week - but what else could be the problem?

  My apologies for the long rant, I am grateful for all the advice!
  Thank you
  I have.

  Hello

  I think the only way to make your system works correctly again is to restore with the cdrom of onboard catering. Simply manage to save your data from your hard drive (the best way would be to put your machine's HARD drive in a USB - HDD enclosure and copy important data on another computer), then wipe the system completely off you hdd.

  After that, the system must run again...

  Welcome them

• Vista does not start after I disabled the service DCOMLauncher

  Hi all.   I really hope that someone can help me with this, because I can't use my computer at all, and I have to use a notebook different to write this post.

  The problem: Windows Vista does not start with the normal settings or Mode without failure.   To be more precise, after Vista starts, he has only a black screen and a limited mouse functionality.

  The background & problem: I use Windows Vista Home Premium SP 2.   I have disabled the DCOMLauncher Service using the program Autoruns from Sysinternal.

  What I tried: I tried to start Vista in Mode safe with no result.

  Thanks to all those who are trying to help me.

  When you choose Safe Mode choose last known good startup.

  As long as your subsequent boots are deemed unsuccessful, which is perhaps not the case, this will start the configuration before using Autoruns.

  Safe Mode command prompt works?

• X 240 does not start after upgrading to the latest version of the bios

  I bought windows 8.1 factory machine. Then I had the local store install 8.1 on larger ssd. I did just last update of the bios, and now the machine does not start. I'm sure it is bound uefi, but I'm not knowledgeable in this area. The start setting me back by the store was 'only legacy' and secure boot has been disabled.

  It is resolved with a replacement of the cable on the SSD and the system board.

• After you install the new hard drive, it indicates that the product key is not valid for activation on Windows Vista Edition Home Premium

  I just got a new hard drive installed on my computer. He already has Vista Home premium on it. Now when I turn it on it tells me that I typed the product key is invalid for activation. I never typed in one. Now, I don't know what need cause I don't have a disc or product key. What can I do? Please tell me I'm not screwed. Any help is appreciated. At the bottom it says Build 6000 this copy isn't genuine.

  Hello

  1. what operating system is installed in your new hard drive?
  2 are you able to boot into desktop/safe mode?
  3. What is the number of brand and model of the computer?

  I suggest you to consult the following Microsoft article.

  How to activate Windows Vista:
  http://support.Microsoft.com/kb/940315

  Activating Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/activating-Windows-frequently-asked-questions

  How to find a phone number for a Microsoft Product
  Activation Center:
  http://support.Microsoft.com/kb/950929/

  How and when to contact Microsoft and support Customer Service:
  http://support.Microsoft.com/kb/295539

  Genuine Windows: Frequently asked questions 
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  Hope the information is useful.

• Satellite L30 does not start after the upgrade to 2 GB of memory

  I bought 2 GB Crucial memory for my L30. After removing the 512 MB module and adding two modules of 1 GB the L30 wouldn't start. With only 1 GB start ok ok, with the other boot only 1 GB.

  Either 1 GB modules and module of 512 MB with start ok. The two modules of 1 GB boot not together. Crucial gave up and offered a full refund, but I'd rather have a solution if possible.

  At the BIOS level is 2V30, that I understand to be the latest version available.

  Ideas please, John

  Hello

  You're right, this problem seems very strange and I wonder why this happens.
  Satellite L30 certainly supports the 2 GB of memory and you should be able to upgrade with 2 x 1024Mo modules!

  It's strange, but it seems that these two modules are not compatible together
  I found Toshiba recommend module on options and accessories site.
  DDR2 400/533 1 GB (PA3411U-1M1G) maybe you could try this one...

  In any case, I don't think that you will be able to solve this problem in another way. The modules must be replaced.

• Satellite A30 - does not start after the RAM to level

  Hello

  I recently installed a crucial for memory
  my laptop, which is a Toshiba Satellite A30. However, when I try and
  restart the laptop, he tries to restart the fan turns on then turns off with a beep sound and this is not
  even to get to the Toshiba start screen.

  The memory I installed is 1 GB, 200-pin SO-DIMM, 128 X 64, DDR 333, CL2.5, part number CT12864X335.

  "Memory module PC2700 DDR 1 GB, 200-pin SODIMM

  CT12864X335
  
  
  * Size of the module: * 1 GB
  * Package: * 200-pin SODIMM
  * Function: * DDR PC2700
  ' * Features: * DDR PC2700 • CL = 2.5 • unbuffered • NON-ECC DDR333 2.5V • • • 128Meg x 64 •.

  I have
  took out and put back the old memory and the laptop boots
  normally and is OK, I even tried to put the memory in different
  slot machines, but it still has the same problem.

  This suggests that memory is faulty, as bought crucial memory must be compatible with my laptop?

  Thanks for your time,

  You have this problem if you use modules or only the new module?

  If you only use the new module, the case is clear. The new module is defective or is not compatible with the laptop.
  I think you should get back on the computer dealer and request a new. Maybe you can get a Kingston module because I have only good experience with this production.

  If you use both modules, they are not compatible. You should only use the modules with the same specifications.